The custom Save As dialog navigated up the tree solely via
`Path::parent()`, which returns `None` at a drive root (`C:\`).
Navigation therefore dead-ended on the starting volume, so other
drives and USB sticks were unreachable.
Add a synthetic Windows "This PC" drives root above the drive
letters. `parent_folder()` now climbs `…\sub → C:\ → This PC`, and
`read_dir_entries()` lists the available volumes (probed A:–Z: by
stat, no new dependency) when at that root. The dialog's up-button
and path bar route through the same helper and show "This PC".
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
ViewCube "already there → flip to opposite" tested the main (paper) camera,
which always looks straight down, so inside a floating viewport clicking
"top" landed on "bottom". Route the check through active_gaze_dir() — the
gaze of the camera the cube actually reflects.
Off-screen viewports:
- The active-viewport outline clamped only its origin while keeping full
width/height, shifting the whole border inward. Clip it to the visible
canvas (origin AND size) so it hugs the real viewport edge.
- Double-click activation tested each viewport's full paper rect, so a
click on empty space beside a viewport that runs off-screen matched its
partly-off-canvas rect and switched to it. Activation now keys on the
visible on-screen rect (viewport_at_screen_point), picks the smallest
(topmost) on overlap, and accepts the border-wire pick only when the
click also lands inside that viewport's visible rect — so a far
viewport's edge passing near the cursor can't steal the activation.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The whole pipeline is relative-to-eye now, so the f32/f64 split is
vestigial. Merge eye_f64 into eye() returning DVec3; direction-only
callers take .as_vec3().
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Clean up the last zero-valued world_offset locals outside the scene
tessellation core: the UCS wire-affine / grid-basis origin shift
(document.rs), the coordinate readout (view.rs), grip absolute-apply
(update.rs), the dead properties-edit re-offset guard, the MTEXT preview
glyph-box shift (mtext_editor.rs), and the cross-drawing paste correction
(commands.rs / cmd_result.rs) — including the now-dead
`clipboard_world_offset` field. Coordinates are absolute throughout.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- Object-snap-tracking points now project through the relative-to-eye path
(view_proj_rte + eye) instead of the full view-projection, so they stay
precise at UTM-scale coordinates — the last consumer of the legacy full
view_proj outside the CPU frustum-cull / scissor path.
- Rename Camera::project_f64 → project and unproject_on_plane_f64 →
unproject_on_plane: the f32 twins are gone, so the disambiguating suffix
is vestigial. eye_f64 keeps its name — the f32 eye() still builds the
view matrices.
- Remove stale #[allow(dead_code)] from eye_f64 / project / unproject_on_plane
(all live now).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Extend UCS support to in-viewport (MSPACE) editing through the existing
single-converter structure: one active_ucs drives every UCS-aware system,
now in the Model tab AND inside a floating viewport.
- Single predicate DocumentTab::editing_model_space() (Model tab or active
viewport) replaces the model-only gate in ucs_wire_affine,
ucs_rotation_angle, ucs_grid_basis, viewcube_ucs_mat, the coordinate
readout and the cursor-plane pick.
- Per-viewport UCS: refresh_active_ucs() sets active_ucs to the pane's UCS
on every transition (the entered viewport's own UCS from its
ucs_origin/x_axis/y_axis/ucs_per_viewport fields, the header model UCS in
the Model tab, none in plain paper); persist_active_ucs() writes changes
back to the viewport entity or the header so they round-trip. Wired into
EnterViewport/ExitViewport, layout switch, load and the UCS command.
- Visuals: grid_views now returns each pane's handle so every content
viewport's grid aligns to its own UCS; the UCS icon draws inside the
active viewport projected through the viewport camera.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Replace the leaky paper-projection approach to MSPACE editing with one
coordinate adapter that routes all interaction through the viewport's own
camera — the exact camera+rect the GPU draws the content with.
- Add Scene::viewport_edit_frame(canvas) -> (camera_for_viewport,
viewport_screen_rect): the unified adapter. Inside a floating viewport
the viewport is the active pane, so snap/pick/grip/preview/DYN run in
model space and land on the pixels the GPU draws. Tracks pan/zoom/twist
exactly (twist handled by camera_from_view); crop is pixel-preserving so
full-rect projection + cursor offset matches.
- Route snap-move, click-pick, grip-drag, grip hit-test, grip render,
hover (HoverDwellTick), selection (single/box/poly/cycle) and command
entity-pick through it via pick_view / cursor_model_point helpers and an
edit_cam-aware "active pane = viewport rect" override, so the existing
tile offset plumbing just works. Fixes wrong-object hover/selection and
stale snap after pan/zoom.
- DYN: project anchors with the viewport camera and shift to canvas space
so the guide/labels sit correctly (also fixes a latent tiled-model bug).
- Separate grid snap from object snap entirely: new Snapper.grid_snap_on
flag, Grid removed from the osnap mode set, evaluated independently of
the osnap master. Object snap never catches grid; grid corners are
picked only when grid snap is on, at lowest priority. Default off.
- grip.rs: project_rte + grips_to_screen_rte / find_hit_grip_rte taking
(view_rot, eye) so grips project through the composed view.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Two UTM-scale rendering defects.
- UCS icon jittered: it projects only axis DIRECTIONS but went through the
full view_proj, whose ~5.7e6 translation cancels catastrophically in f32.
Feed it the rotation-only view_proj_rte instead (translation dropped).
- Fallback outline geometry (hatch boundary, viewport/insert/ole2frame
frames, Solid3D edge wires) built absolute f32 points with an empty
points_low, so at UTM the outline sat ~0.5 m off its own fill (the hatch
fill renders precisely via the world_origin-relative HatchModel pipeline).
FallbackGeometry now carries absolute f64 points + key vertices; the
tessellate dispatcher splits them into the double-single high/low pair the
relative-to-eye wire pass needs, so outlines land exactly on their fills.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Whole command/snap/grip/cursor chain now builds on f64 DVec3 end to end,
so picked points, snaps and grip drags stay precise at UTM-scale
coordinates instead of quantizing to ~0.5 m through f32.
- All ~80 command files migrated: draw (line/circle/arc/ellipse/shapes
in full f64; others via point methods), modify, annotate, insert, view,
inquiry, layers, groups, clipboard, layout.
- Entity apply_grip impls updated for GripApply::{Absolute,Translate}(DVec3).
- Construction sites (EntityTransform/CmdResult/DynAnchor) emit DVec3;
wire-preview boundaries cast to f32 only at the GPU edge.
- Modify/annotate commands keep internal Vec3 geometry where precision is
non-critical, casting at the DVec3 boundary; key draw commands store f64.
Builds clean (no warnings). Visual verification of crosshair/snap/grip at
extreme UTM zoom pending.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Route the on-screen chrome that projects absolute world coordinates
through the f64 relative-to-eye helpers so it stays glued/jitter-free at
UTM scale after the world_offset removal: grips (grips_to_screen) and
grip hit-testing (find_hit_grip) now project from the f64 GripDef.world
via Camera::project_f64; the model grid and its UCS axes carry the camera
eye (DVec3) + rotation-only matrix and a f64 origin, projecting each line
relative to the eye. Snap-marker / OST-point / compute_grid_step still use
the f32 path (single points / spacing — negligible) and can follow.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Delete the world_offset field from Scene and DerivedCaches and the
load-time assignment; every reader now uses a zero origin. Geometry is
absolute and the double-single relative-to-eye pipeline keeps it precise,
so the coarse origin is gone. world_offset_from_centers still derives
local_extent_max (camera/cull span) but returns no offset. The remaining
`world_offset: [f64;3]` function parameters are now always zero — dead
plumbing left for a later mechanical sweep; behaviour is unchanged.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Foundation for relative-to-eye rendering: the pivot the camera orbits
must stay precise at large offset-relative coordinates so the derived eye
(which the RTE path subtracts per vertex) is exact. `Camera::target` is
now DVec3 and `eye_f64()` exposes the full-precision eye; `view_proj`
still casts to f32 at the matrix, so behaviour is unchanged for now.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The on-canvas dynamic-input boxes measured relative X/Y deltas and the
polar angle in world axes. They now read in the active UCS plane (via
UcsXform::vec_to_ucs on the offset-invariant delta), matching the UCS
ortho/polar constraints and coordinate readout. Identity UCS reproduces
the world-frame values; absolute first-point fields are unchanged.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The grid ruled along world X/Y/Z through the world origin. It now rules
along the active UCS axes through the UCS origin (passed in render/wire
space), so it lines up with the user's coordinate system. Paper space
stays plain WCS; identity UCS reproduces the old world-aligned grid.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Introduce one bridge between WCS (how geometry and the file are stored)
and the active UCS (the coordinate system the user works in), so every
UCS-aware system routes through it instead of re-deriving axis math.
- UcsXform (app/helpers.rs): the converter — to_wcs/to_ucs (points),
vec_to_wcs/vec_to_ucs (directions), axes(), is_identity(). Orthonormal
axes, so the inverse is the transpose. The old ucs_to_wcs / ucs_rotate_vec
free fns now delegate to it (one implementation).
- DocumentTab::ucs_xform() builds it from the tab's active_ucs (None = WCS).
- DocumentTab::adopt_active_ucs_from_header() loads the document's saved
current UCS (header model-space UCS) into active_ucs on open, so the file's
coordinate system is live immediately; called from both load paths.
- Status-bar coordinate readout reports the cursor in the active UCS.
- UCS icon tripod projects the active UCS axes, so it rotates to the UCS
instead of always showing world X/Y/Z.
First slice of routing the app's coordinate systems through the converter;
input/picking, grid, ViewCube, and the remaining readouts follow.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Model-space tiled VPORTs and paper-space floating VIEWPORTs each carried
their own copy of the saved-view→camera math, so a fix to one drifted
from the other (the recurring grid/twist regressions). Route both, plus
the View-table and sheet-viewport paths, through one decoder and fix the
bugs that the duplication hid.
Decoder unification:
- New camera_from_view(direction, target, center, height, twist,
world_offset): the single saved-view→Camera decoder. camera_from_vport
(tiled), camera_for_viewport (floating, + auto-fit), and the View-entry
/ sheet-viewport apply paths all delegate to it. Tiled vs floating now
differ only in field source and the floating auto-fit fallback.
Twist round-trips on layout switch and file save:
- camera_from_view applies roll = -twist; the write path was dropping it,
so model→paper→model (and reload) reset the view to raw orientation.
- New Camera::roll() recovers the camera roll; sync_camera_to_document,
write_camera_view_entry, and vport_from_camera now store -roll as the
view twist on the *Active VPort, the OpenCADStudio_Camera_Model View
entry, the per-tile VPorts, and the paper sheet viewport.
Rotation-aware frustum cull:
- New view_cull_aabb(): the entity-cull rectangle is built from the
camera's right/up basis (so a twisted/rotated view's rotated rectangle
is enclosed) instead of world X/Y axes; returns None for tilted views
to disable the flat-XY cull rather than wrongly hide geometry. Applied
to the model-tile and paper-viewport cull sites.
Paper viewport scale:
- The floating-viewport auto-fit overlap test summed view_target +
view_center raw; under a twist view_center is a DCS offset, so the sum
landed far from the real WCS centre and wrongly tripped the auto-fit,
rendering content at the wrong zoom. It now tests the decoded
(twist-folded, wire-space) target. The CPU projection path derives its
scale from that same camera, locking hit-test/snap to the GPU render.
Grid enumeration:
- ViewportInstance gains grid_on; the two grid-view collectors collapse
into one grid_views() derived from the same active_viewports() list the
renderer uses, so the grid overlay can no longer drift from the views
on screen.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Gate target-specific code so neither build warns about the other's items:
native-only helpers (view, window icon, file dialogs, file association, plugin
host/guard/registry, self-update) are cfg'd to non-wasm; the wasm-only font
fallback (script_of / cjk_lang / request) is cfg'd to wasm. Drop an unused mut,
allow the few genuinely-conditional dead items (mesh_click_hit, GPU layout
helpers, parity stubs), and gate the embedded PlotSettings-unrelated dead
constants. Both targets now build clean (only the unavoidable nom/quick-xml
future-incompat dependency notice remains).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Grid (and grid-snap) state was shared through the global show_grid flag, so
toggling it in model space also turned it on in paper space, and a floating
viewport's grid painted across the whole paper — and beyond the 3-D view when
zoomed in.
- Store grid/snap per view: a model tile in model space, the active floating
viewport or the layout's sheet viewport in paper space, round-tripped via the
viewport status flags.
- adopt_view_display on layout switch and viewport enter/exit so the live
toggle follows the view you are in.
- Render one grid per view (paper_viewport_grid_views): the sheet over the
paper, each floating viewport clipped to its screen rectangle.
- Clamp the grid clip to the widget so an overflowing viewport rectangle never
paints grid outside the 3-D view.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
In-place block edit now reads more like a dedicated editor:
- Fade everything except the edited entities toward the background (wires,
block instances and 3D solid meshes) so the block stands out while the
surrounding drawing stays visible for context.
- Don't leave a command active on enter — the user edits the block's geometry
freely (move, grips, draw, erase) and finishes explicitly.
- Show the right-edge vertical toolbar with clickable Save (REFCLOSE_SAVE) and
Discard (REFCLOSE_DISCARD) buttons while a session is active, so the edit
can be ended without typing.
The fade clears on save/discard, restoring full brightness.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Add an Invert Selection entry to the selection context menu (below
Select Similar): it replaces the current selection with every other
selectable object in the active layout. Candidates come from the visible
wire set, so objects on off/frozen layers stay excluded.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The rollover hit-test now sweeps wires, hatches, block-internal hatches
and shaded solid bodies, which is O(N) per cursor frame and was freezing
the crosshair on large drawings. Each idle move now clears the live
highlight and arms a dwell timer; HoverDwellTick runs the pick once the
cursor has been still for HOVER_DWELL_MS (120 ms), using the active
tile's bounds so the deferred pick matches the entity actually under
the cursor in tiled viewports.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Ctrl+V was globally bound to the entity paste command, so it never pasted
into an open text editor, and even when routed there iced's clipboard read
is a no-op on the web. Route Ctrl+V to the focused editor and, on the web,
read the system clipboard via the browser's async Clipboard API (the
keypress is a user gesture, so the read is permitted):
- MText editor: insert at the caret (web + native).
- TEXT field: append on the web; native lets the text_input paste itself.
- No editor open: falls through to the entity paste command as before.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The web build has no system-font access, so CAD text in non-Latin scripts
(Cyrillic, Greek, CJK, …) rendered as nothing — build_fallback was a hard
None on wasm (#141). Instead, ship per-script Noto subsets under web/fonts
(one alphabet per file, SIL OFL 1.1) and fetch them lazily over HTTP the
first time a drawing uses that script, then outline glyphs with ttf-parser.
- web_font: Script enum + script_of (char → script font), a per-script
store with lazy fetch, and a pending queue drained by the app loop.
- CJK is split by language (chinese/japanese/korean). Han ideographs share
code points but differ by language, so the shared block is routed by the
document's $DWGCODEPAGE (932→JP, 949→KR, GB/936→CN); kana is always
Japanese, Hangul always Korean. Re-tessellates when the language changes.
- build_fallback (wasm) outlines from the fetched subset; clear_fallback_cache
lets glyphs that missed while a font was in flight reappear on load.
- PollWebFonts subscription (web only) + WebFontLoaded message drive fetches.
- Trunk copy-dir serves web/fonts; nothing is bundled into the native binary
(desktop keeps using system fonts).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Thin vertical separators between every control in the top-left chip
(split / split / render-mode / grid / snap) for clearer grouping.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Move grid and grid-snap toggles off the status bar (and its customization
menu) into the top-left viewport chip, now a single container holding the
horizontal/vertical split buttons, render-mode picker, and grid/snap
toggles, sized to the render-mode picker. Add grid + magnet (snap) icons.
Render the grid per model tile from each tile's own grid_on, in its own
bounds and camera, instead of a single grid in the active tile. This stops
the grid flickering on/off as the cursor crosses panes or leaves the
viewport, and lets each pane show its own grid independently.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
UI chrome (dropdown carets, undo/redo, checkmarks, close/menu/osnap,
layer/file-menu icons) and ribbon tool icons were drawn as Unicode
glyphs. Desktop fills missing glyphs via system-font fallback, but the
web build bundles only Fira Sans with no fallback, so they rendered as
empty tofu boxes (issue #116).
Add a shared src/ui/icons.rs (SVG-backed, tintable) plus bundled assets,
and switch every glyph site and IconKind::Glyph tool def to SVG.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
OpenCADStudio no longer bundles plugins — every add-on is an external
cdylib loaded from the plugins folder or installed via the marketplace.
- Remove the demo plugin and the in-tree ocs_example_plugin crate.
- Remove the inventory-based built-in registration path (PluginRegistration,
all_plugins, installed_manifests); registry now serves core ribbon tabs
plus loaded external plugins, and try_dispatch routes only to externals.
- Plugin Manager drops the 'compiled into this build' section; the
enable/disable toggle moves onto loaded external cards.
- Prune the now-dead HostSession/DocumentTab helpers and re-exports.
Part of the #100 extensibility epic (phase 2).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Add a Plugin Manager marketplace that installs external add-ons from a
GitHub repo's Releases. A curated registry (plugins/registry.json in this
repo, extended by PR) lists discoverable plugins; the host fetches it,
shows each entry with a release dropdown, and on install downloads the
asset matching the user's platform plus plugin.toml into the plugins
folder (API-version checked first). Users can also link arbitrary
owner/repo manually. Linked repos persist in settings.
Desktop only (ureq + serde_json); the install path reuses the phase-2
loader. Part of the #100 extensibility epic (phase 2).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Move BuiltinPlugin into ocs_plugin_api (host feature) so out-of-tree
crates can implement it, and add export_plugin! to emit the two C
symbols a cdylib exposes: ocs_plugin_api_version (checked first, so an
ABI-incompatible build never runs) and ocs_plugin_register -> boxed
BuiltinPlugin. The host loads every compatible package from the plugins
folder at startup via libloading (desktop only), keeps the library
resident for the session, and merges its ribbon tab + command dispatch
into the same paths as built-ins (honouring enable/disable). The Plugin
Manager shows external packages with a Loaded / incompatible status.
Approach B: the plugin hands back a boxed trait object, assuming a
matching toolchain + ocs_plugin_api version (the version symbol enforces
the latter). crates/ocs_example_plugin is the reference cdylib.
Part of the #100 extensibility epic (phase 2).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Phase-2 groundwork: scan <config>/OpenCADStudio/plugins/<id>/plugin.toml,
parse the documented keys (no new TOML dep), check for a platform native
library beside it, and gate on the API version. The Plugin Manager gains
an "External (plugins folder)" section showing each package with a
status pill (Ready to load / API incompatible / No library). Discovery
only — actually loading the cdylib is the next step.
Part of the #100 extensibility epic (phase 2).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Points could only render as a 1px dot — no way to change PDMODE/PDSIZE.
- PDMODE / PDSIZE commands set the header value and rebuild the glyphs.
- DDPTYPE opens a Point Style dialog: a 5x4 grid of rendered glyphs
(shape x enclosure), a size field, and relative/absolute radios.
- Relative (<=0) PDSIZE now sizes from the current world-per-pixel so the
marker stays a roughly constant on-screen size across zoom, rebuilding
on zoom via the existing camera-generation cache key. Absolute (>0)
scales with the world as before. Switching to absolute with a zero size
seeds a positive value from the on-screen size so it stays representable.
Part of the #100 extensibility epic (point style surfaced in #106).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The manager was a read-only inventory. Each plugin now has an
Enable/Disable toggle: a disabled plugin keeps its manifest listed but
drops its ribbon tab and command dispatch. The disabled-id set persists
in settings.txt (disabled_plugins=) and the ribbon rebuilds on toggle.
Part of the #100 extensibility epic.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
In-canvas modals were locked to screen-centre. Add a green move-arrow
grip beside the ✕ that drags the dialog; positioning is an offset from
centre applied via asymmetric padding. The drag offset is clamped to the
window so a dialog stops at the edge instead of being squeezed, and the
offset resets when the dialog closes so each opens centred.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- Add an "OCS Web" button (bright ribbon-blue, desktop only) to the Start
page that opens the web build at hakanseven12.github.io/OpenCADStudio.
- Send Feedback now opens the GitHub issue with the body pre-filled:
app version + platform (OS/arch on desktop, browser user-agent on web),
via sys::platform_info + sys::percent_encode.
- Remove the redundant About button from the Start page (ABOUT command /
menu still opens it).
Native + web build; 75 tests pass.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Move the unsaved-changes prompt, the Save As browser and the
file-association prompt onto `active_modal` / `modal_content`, reusing
their existing open/close helpers (now just set/clear active_modal). The
daemon `view` no longer dispatches per window — every dialog is an
in-canvas modal, so the app is single-window on native and web alike.
`close_active_modal` handles their ✕: the unsaved prompt cancels the
pending close, the association prompt records that it was answered.
Native + web build; 75 tests pass.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The Text Style editor gained a system-font (TTF) column in the Plan B /
web-fonts work, so its content no longer fits the old 620px width. Size
the modal to 860×480 so all panels show.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Move Table Style, MLeader Style and Dimension Style editors off OS
windows onto `active_modal` / `modal_content`, and turn the colour
picker into a nested modal that stacks over whichever dialog requested
it (`color_pick_target.is_some()` drives the overlay; CloseColorPicker
dismisses it). OpenColorWindow/ColorWindowPick no longer open/close an
OS window.
All thirteen former pop-up windows now render as in-canvas modals on
both native and web; only the native-only assoc/unsaved/save dialogs
remain as OS windows. Native + web build; 75 tests pass.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Move the Text Style and Multiline Style editors off OS windows onto the
shared `active_modal` / `modal_content` path. Their open handlers set
`active_modal` (keeping the existing buffer/stage setup); construction
moves from the daemon `view` dispatch into `modal_content`.
The remaining style editors (Table, MLeader, Dimension) still use OS
windows for now — they carry a nested colour picker that needs its own
handling. Native + web build; 75 tests pass.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Consolidate all migrated dialogs into a single `modal_content` builder
matched on `active_modal`, rendered by view_main. Move Layers, Page
Setup, Layout Manager and Plot Style off OS windows onto it (their
construction relocated from the daemon `view` dispatch, which now only
handles the not-yet-migrated dialogs). Each keeps a bounded size.
Open/close handlers set `active_modal` instead of opening/closing
windows; ToggleLayers toggles it.
Native + web build; 75 tests pass.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Replace the per-dialog open flag with a single `active_modal:
Option<ModalKind>` and one `CloseModal` message. view_main matches it to
render the open dialog as an in-canvas modal.
Migrated off OS windows: About (content-sized), Shortcuts, Plugin
Manager and the Update notice (the latter three keep a bounded size via
a wrapping container, since their lists/scroll need defined bounds).
Native + web build; 75 tests pass.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Start Plan B — replace the daemon's pop-up OS windows with in-canvas
modal overlays so dialogs work identically on native (one main window)
and web (canvas only).
- New `ui::modal::modal(base, content, on_close)`: dims the view behind
a backdrop that blocks clicks but does NOT dismiss, frames the content,
and adds a top-right ✕ as the sole close affordance. Sizes to the
content (no `Fill`), so dialogs shrink to fit.
- view_main stacks the active modal on top, so both run paths show it.
- Migrate About as the pilot: `about_open` bool + AboutOpen/AboutClose
instead of an OS window; About's view shrinks to content.
Remaining dialogs migrate to the same pattern next. Native + 75 tests OK.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The binary now compiles for wasm32 as a runnable web target:
- Split the main-window render into `view_main`, bypassing the
multi-window id dispatch the browser cannot use.
- Add `run_web` / `boot_web`: a single-window `iced::application`
entry for wasm (the browser canvas is the only window). Native
keeps the multi-window `iced::daemon` via cfg-split in `main`.
- Add a `console_error_panic_hook` (wasm-only) for readable panics.
- Add `index.html` + `Trunk.toml` so `trunk serve` builds the wasm
bundle (no-default-features → no solid3d) with COOP/COEP headers.
Native build and all 75 tests unchanged. Browser runtime (rayon
threads, canvas attach, real file I/O) is the next iteration.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Move the 30 flat modules under src/scene/ into six folders by role:
convert (entity→geometry), text (fonts/shaping), model (render models),
pick (hit-test/selection/grips/xclip), view (camera/transform/render),
cache (block + property caches). pipeline/ is unchanged.
Full path migration — all `scene::X` references become
`scene::<group>::X`, no compatibility re-exports. render.rs items that
were `pub(super)` (parent was scene) become `pub(in crate::scene)` to
keep their original scene-wide visibility.
No behavior change; build and tests are green.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Add a TrueType/OpenType render path alongside the LFF stroke engine so
users can pick fonts installed on their machine for text and MText.
- Discover system families via fontdb (sysfont) and list them in the
text-style picker.
- Extract glyph outlines with ttf-parser, flattened into wire strokes
normalized to the same 9-unit cap-height space as LFF glyphs.
- Shape runs with cosmic-text (ligatures, Arabic joining, kerning, bidi)
plus automatic font fallback: a glyph missing from the chosen family
is taken from another installed font.
- Unify both sources behind a single Face type; a shared run tokenizer
drives the stroke (per-glyph) and shaped (TTF) renderers identically.
- Stroke fonts now fall back to a system TTF (cosmic-text picks it) for
characters no LFF font covers, replacing the unicode/iso3098 chain.
Also trim the embedded LFF set from 47 to 26, keeping the AutoCAD-SHX
equivalents and dropping LibreCAD-only fonts now covered by TrueType.
LFF builtins keep priority over same-named system fonts so DXF text
renders identically across machines.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Make angle display, sign and the polar guide reference part of the
common infrastructure instead of per-command logic:
- DynSpec.ref_point now drives the polar guide's reference direction, so
the arc and value box can sweep from a command-defined reference (not
just +X). LINE etc. keep +X by leaving it None.
- `dyn_display_angle_deg` is the single rule for how an angle reads: the
unsigned magnitude of the short angle, so clockwise (cursor on the CW
side of the reference) shows positive. Used by the generic value box,
ROTATE and ARC.
- A typed angle committed via on_text_input is re-signed by the cursor's
side relative to the reference (`dyn_sign_angle_text`), so commands
receive an already-signed value and don't each implement it.
ROTATE: drop its own sweep arc (the polar guide draws it now, anchored at
the centre and swept from the reference); the rotation commits in the
dragged direction whether picked, typed or accepted with Enter.
ARC SCA/CSA: reference the start angle so the arc, sign and readout are
all relative to it.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- ARC: per-step DynSpec for the typed-value modes — included-angle (SCA,
CSA), chord length (SCL, CSL) and radius (SER) show their box and route
the typed value through on_text_input via a new dyn_commit_as_text()
hook; the angle box previews the live span. Point/3P/SCE steps stay on
the legacy polar path.
- ARC + ellipse-arc: derive the previewed sweep direction from the swept
angle with a ~10° tolerance and advance the reference only on a clear
move, so small cursor jitter no longer flips the arc. Ellipse uses the
parametric angle so a flat ellipse isn't sticky.
- Ellipse arc: the start-angle step now shows a line from the centre to
the cursor (it only picks the start angle) instead of a misleading arc.
- Ellipse arc: use the same minor-axis direction (Z x major) as the
rendered entity so the committed arc matches the preview instead of
mirroring across the major axis.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Extend the DynSpec coverage and add the guides those commands need:
- Rectangle: two-corner enters width/height as unsigned magnitudes (the
sign follows the cursor side, like the angle entry), drawn with the
rectangle as the guide; rotated rectangle's height is a single distance
measured square to the base edge (dimension line offset off the edge
with extension lines); centre rectangle shows half-width/half-height.
- Polygon: inscribed/circumscribed vertex step shows radius + rotation.
- Ellipse: minor-axis step (all three modes) measures the half-length
perpendicular to the major axis and draws that semi-axis from the
centre; angle steps anchor their arc at the centre.
Adds DynGuide::Perp / PerpDim (perpendicular measure to a reference line)
and DynSpec::ref_point, plus Width/Height role handling (unsigned display,
cursor-signed commit) and diameter value scaling.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Introduce a per-command, per-step dynamic-input description so each step
shows the value boxes and guide geometry that make sense for it, instead
of a one-size-fits-all distance/angle pair.
- command: add DynSpec{anchor, fields(role+label), guide}, DynRole
(X/Y/Z/Distance/Angle/Radius/Diameter/Width/Height/Factor/Count with
label + value scaling), DynGuide(None/Polar/AxisDelta/Radius/RectSides)
and DynAnchor. New dyn_spec() trait method defaults to None so commands
on the legacy dyn_field() path are unchanged.
- overlay: redraw the dynamic-input layer by guide — polar reference line
+ angle arc, single radius line, dotted axis legs, or a cursor row —
and place each box by its role. Angle reads as the unsigned magnitude
of the short arc; a typed polar angle takes the sign of the cursor side.
- app: route fields/guide/anchor through the tab; resolve points from the
step anchor and de-scale typed values by role (typed diameter -> radius).
- circle: CR shows a radius value on one line to the cursor; CD shows the
diameter (twice the cursor radius). No angle arc on radius steps.
- pline/mline: keep polar dynamic input on vertex steps that also accept
keyword letters via point_step_accepts_keywords().
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Read-only inventory of the add-ons compiled into the build — name, version,
id, API level, description, command prefixes — built from the extracted
`ocs_plugin_api` manifest. Opened with the `PLUGINS` / `PLUGINMANAGER` command
or the Start-page "Plugins" button.
Adds `installed_manifests()` to the plugin registry and wires the window the
same way as the existing About / Shortcuts windows.
Part of #100 (phase-1 plugin manager UI stub).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The start (welcome) tab blocks any command that isn't NEW/OPEN/EXIT/QUIT,
so the Contribute and Release Notes buttons did nothing but print
"No drawing open". REPORT and CHANGELOG (and ABOUT) only open a URL or a
dialog and need no drawing, so allow them through.
Also rename the "Contribute" button to "Send Feedback" (#44) and update
the REPORT status line to match.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
