Switching to a Layout re-tessellated the whole model — `memo_miss=186455`,
2034 ms — to arrive at geometry identical to what was already in the memo.
The only thing that differed was colour.
`local_wires_for` already knows this: it stores the raw colour and drops
its background argument with `let _ = bg_color;`, noting that
`Batches::finalize` applies `adapt_to_bg` last, "so the cache no longer
has to rebuild on BACKGROUND / layout-switch". The tessellation memo's
guard had not been told, and still mixed the background in, so every
entry was discarded on a switch.
`finalize` now records what its colour resolution consumed — the raw
colour, the raw glyph colours, and the three flags it branches on — as
`WireModel::bg_adapt`, and `resolve_colors_for_bg` replays it for another
background. The guard drops the background, so a memo entry serves any
layout.
The resolution recomputes from the recorded raw colour rather than from
the resolved one, which makes it idempotent and therefore safe over a set
that mixes memo hits with freshly tessellated misses. Re-adapting the
resolved colour would not be safe: `adapt_to_bg` snaps a near-white colour
to pure black on a light background, and pure black comes back pure
*white* on a dark one, losing the tint. A test pins that asymmetry so the
raw colour is not optimised away later.
The contract is tested against the real `finalize` rather than a copy of
its logic: for every background pair, building under one and resolving for
the other lands exactly where building under the other would have.
`bg_adapt` is `None` for wires built anywhere else, and the resolution
skips them, so nothing outside the block cache changes colour. It is also
`None` when the resolution would be a no-op — a preserved colour with no
canvas fill looks the same under every background — which keeps the common
case at no cost.
Ordering is unchanged: the pass runs inside the builder, before
`append_scene_markers` and `apply_refedit_fade`, both of which have their
own separate background dependency.
`wires-build` gains `colors=` so the pass has a number of its own.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Share source buffers across block placements and render nested content with GPU instance transforms.\n\nChunk silhouettes and compact mesh material data so large drawings stay under device buffer limits and remain responsive.
The last four truck crates are gone from the manifest. What they were doing
falls into three parts, and each now has one answer instead of two.
NURBS evaluation. truck was carrying B-spline curves and surfaces for the
SPLINE entity, hatch boundaries, BLEND's endpoint frames, the spline preview
and ACIS spline-surface faces. The kernel now has both, over one de Boor
written across however many coordinates a control point holds — so a plane
curve and a space curve cannot drift apart, and a surface is the same
algorithm applied twice. The rational and the polynomial cases stop being
separate types: weights absent means polynomial.
The entity conversion. Every LINE, ARC, ELLIPSE, SPLINE and polyline was
built into truck topology purely so it could be sampled back into points.
They are sampled through `entities::curve` now, which is where each one's
geometry is already defined once and what EXTRUDE and REVOLVE read — so a
circle drawn on screen and a circle handed to the Model tab come from the
same definition. That retires four of TruckObject's variants and the module
is renamed for what it does.
SWEEP and LOFT. Both only ever produced a mesh, so both are built from point
lists: a band of quads per span, and a lid where a profile closes. Lofting
profiles of different densities resamples them by distance rather than by
index, so a circle lofted to a square no longer twists.
Two things worth noting for anyone reading the old comments. The tolerance
globals that lived in the tessellation module were never about truck at all —
they are the per-frame chord height, and they move to `curve_tol`. And the
rule that a profile handed over as `Lines` silently broke EXTRUDE and REVOLVE
no longer holds: those read the curve directly and never look at this channel.
The two `automation` test failures are unchanged from before this and are not
caused by it.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Every 3-D solid OCS makes or opens now goes through cadkernel, which holds
analytic surfaces — a cylinder is a cylinder record, not a spline that looks
like one. That is what lets a solid built here be written back out as exact
ACIS instead of a triangulation, and a facetted export is a one-way door: the
next application to open the file would have no way back to the circle.
The Model tab's seven primitives, the Design-group booleans, 3DROTATE,
3DMIRROR, 3DALIGN, SLICE, SECTION, POLYSOLID and PYRAMID all come from the
kernel now, and `scene.solid_models` holds a `Body`. A mirrored solid needed
its own care before; the kernel reverses the loops on the way through, so it
comes back the right way out rather than lighting black.
EXTRUDE and REVOLVE sweep the profile `entities::curve` already defines, so a
circle, an arc-bulged polyline and a closed spline arrive as the same thing.
A circle extrudes into four cylinder patches rather than a run of chords, and
a profile turned about an axis becomes a cone, a sphere or a torus. A spline
profile has no analytic side wall and is refused rather than approximated.
ACIS goes both ways through the codec's own bridge: `lift` to read and
`append` to write. That drops the 679-line truck conversion and the planar-
only exporter, and the tessellator keeps its bespoke sampler as a fallback for
whatever the kernel cannot yet express — reported rather than passed off as
whole, since a mesh missing a wall looks finished.
truck-shapeops is no longer used and is gone from the manifest. truck-modeling
stays for now: fourteen files use it as a 3-D NURBS evaluator, which the
kernel has no answer for yet, and SWEEP and LOFT have no kernel operation
behind them either.
The two `automation` test failures are unchanged from before this and are not
caused by it.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Xref merge now inserts entities in the source block's chain order and
carries SortEntitiesTable objects across (remapped to merged handles).
draw_depth_map values become [depth, half] so exploded block/xref fills
and wide-polyline band wires both compose child depth as
insert_depth + in-block rank x half, recursing into nested inserts with
the same divisor - bands and fills from one block interleave by the
block's internal order instead of stacking at the insert's single depth.
Band batches split per rank via WireModel.depth_override; thin wires
stay merged. The wire arena falls back to a full rebuild when a slab
carries mixed depths so refreshes don't flatten band overrides.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
A wide polyline with per-vertex varying widths rendered at its widest edge
(uniform-width ones were already exact). Draw the true taper instead.
`WireModel.taper_widths` carries a per-point full band width. The wire
instance (native slim + web fat) gains per-endpoint `world_hw_a/b`, and both
wire shaders interpolate `mix(hw_a, hw_b, which_end)` so each segment's band
narrows/widens linearly — depth-tested, and the linetype dash still applies.
Alignment (widths must match the tessellated points) is solved by building
both together: a new `TruckObject::TaperedLines(points, widths)`, filled by
`common::tapered_band_points` (straight = endpoints, arc = 16 samples with the
width lerped along it). to_truck routes a varying-width polyline here —
LwPolyline before the PLINEGEN split, Polyline2D at its return — while a
uniform-width one keeps the constant-band Contour path unchanged. `world_width`
stays the widest edge as the PDF-stroke + zoom-floor fallback.
Blocks fall back to the constant-widest band (`LocalWire` carries no
taper_widths).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
A wide polyline's flat band was drawn by the hatch pipeline: a solid fill
with only draw-order depth. It ignored the entity linetype (the width
"crushed" the dash pattern) and showed through 3-D geometry in a tilted view.
Draw the band from the polyline's own centre-line wire instead. A new
`WireModel.world_width` (drawing units) makes the wire vertex shader expand
the quad by `world_half_width / world_per_pixel` (clamped to a hairline), so
the band is sized in world units and tracks zoom. Because it is now a wire:
- the GPU dash shader dashes the band by arc-length — the linetype applies;
- it is depth-tested at the polyline elevation — no draw-order see-through;
- no CPU band triangles or per-dash geometry are generated.
`world_half_width` rides in `WireConst` (native, replacing a pad) and the web
`WireInstance` (loc 14); both wire shaders branch on it. The tessellator sets
`world_width` from the LwPolyline width on the Contour / SegmentedLines arms,
and the model-space fill loop no longer emits a hatch band for any LwPolyline.
Pick still uses the band polygon (`pick_tris`).
Blocks keep the hatch band: `LocalWire` carries no `world_width` (finalize
zeroes it), so a scaled insert still scales its band correctly.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Rectangular paper viewports now go through the same GPU stencil clip as
non-rectangular ones: viewport_clip_boundary_ndc returns the four rect
corners (a full-target mask) instead of nothing, so the render path has
no rect/non-rect special case — every content viewport carries a clip
boundary and draws with stencil reference 0xFF.
With a single clip path, the old per-wire / -image / -wipeout scissor
mechanism is fully dead and removed: compute_*_scissors, the
*_pixel_scissors buffers, the project_scissor helper, the per-pass
set_scissor_rect blocks, the vp_scissor field threaded through
WireModel / ImageModel / HatchModel and their GPU mirrors (WireGpu /
ImageGpu / WipeoutGpu / HatchWebGpu), from_run's scissor parameter, the
scissor grouping in build_wire_buffers, and the is_arena_eligible gate.
Net -245 lines across 54 files.
Rectangular viewports still clip exactly via their own render rectangle;
the stencil mask is a redundant full-target no-op there, kept only so
the clip code path stays uniform. XCLIP keeps its CPU wire clip.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Hakan Seven