//! Generated lookup table for the complete application-facing locale catalog.
//! Source strings remain lookup-only compatibility keys; Fluent message and attribute ids are embedded below.

pub(super) fn message_attribute(source: &str) -> Option<(&'static str, &'static str)> {
    match source {
        "Entire drawing" => Some(("common", "entire-drawing")),
        "Delete from drawing" => Some(("common", "delete-from-drawing")),
        "Destination" => Some(("common", "destination")),
        "File name and path:" => Some(("common", "file-name-and-path")),
        "Insert units:" => Some(("common", "insert-units-label")),
        "Please select or enter a block name." => Some(("common", "wblock-err-no-block-name")),
        "Block \"{}\" does not exist in drawing." => Some(("common", "wblock-err-block-not-found")),
        "Please specify a file name and path." => Some(("common", "wblock-err-no-path")),
        "Cannot write to the current drawing file." => Some(("common", "wblock-err-current-drawing")),
        "WBLOCK writes objects, a block, or the entire drawing to a new drawing file." => Some(("common", "wblock-help-info")),
        "WBLOCK  Specify insertion base point:" => Some(("insert", "wblock-specify-insertion-base-point")),
        "Auto Constrain" => Some(("common", "auto-constrain")),
        "Delete Constraints" => Some(("common", "delete-constraints")),
        "Dimensional" => Some(("common", "dimensional")),
        "Geometric" => Some(("common", "geometric")),
        "Hide All" => Some(("common", "hide-all")),
        "Parameters Manager" => Some(("common", "parameters-manager")),
        "Show All" => Some(("common", "show-all")),
        "Show/Hide" => Some(("common", "show-hide")),
        "Boolean" => Some(("model", "boolean")),
        "Create" => Some(("model", "create")),
        "Extrude" => Some(("model", "extrude")),
        "Loft" => Some(("model", "loft")),
        "Polysolid" => Some(("model", "polysolid")),
        "Presspull" => Some(("model", "presspull")),
        "Pyramid" => Some(("model", "pyramid")),
        "Revolve" => Some(("model", "revolve")),
        "Sweep" => Some(("model", "sweep")),
        "    {:?}" => Some(("view", "message")),
        "  (none — use: SHORTCUTS SET <key> <command>)" => Some(("common", "none-use-shortcuts-set-key-command")),
        "  Alignment:" => Some(("common", "alignment-indented-label-title-case")),
        "  Background fill enabled" => Some(("common", "background-fill-enabled")),
        "  Blocks: {}" => Some(("styles", "blocks")),
        "  Borders  (type / weight / color / spacing / hidden)" => Some(("common", "borders-type-weight-color-spacing-hidden")),
        "  Code page:         {}" => Some(("view", "code-page")),
        "  Color: %{cur_color}" => Some(("styles", "color-cur-color")),
        "  Created (Julian):  {:.6}" => Some(("view", "created-julian-6")),
        "  Data type:" => Some(("common", "data-type")),
        "  Fill color:" => Some(("common", "fill-color-indented-label-sentence-case")),
        "  Fingerprint GUID:  {}" => Some(("view", "fingerprint-guid")),
        "  Format string:" => Some(("common", "format-string")),
        "  Handle {:X}: \"{}\"" => Some(("inquiry", "handle-x")),
        "  Hyperlink base:    {}" => Some(("view", "hyperlink-base")),
        "  Insert {:x}: no attributes." => Some(("draw", "insert-x-no-attributes")),
        "  Last saved by:     {}" => Some(("view", "last-saved-by")),
        "  Layers: {}" => Some(("styles", "layers-value")),
        "  Linetypes: {}" => Some(("styles", "linetypes-value-indented-title-case")),
        "  Lineweight: %{cur_lw}" => Some(("styles", "lineweight-cur-lw")),
        "  Measurement:       {} ({})" => Some(("view", "measurement")),
        "  Menu name:         {}" => Some(("view", "menu-name")),
        "  Off   Color        Ltype" => Some(("common", "off-color-ltype")),
        "  Project name:      {}" => Some(("view", "project-name")),
        "  Proxy graphics:    {}" => Some(("view", "proxy-graphics")),
        "  Required versions: {:#018x}" => Some(("view", "required-versions-018x")),
        "  Screening: %{cur_scr}" => Some(("styles", "screening-cur-scr")),
        "  Stylesheet:        {}" => Some(("view", "stylesheet")),
        "  Text color:" => Some(("common", "text-color-indented-label-sentence-case")),
        "  Text height:" => Some(("common", "text-height-indented-label-sentence-case")),
        "  Text style:" => Some(("styles", "text-style-indented-label-sentence-case")),
        "  Text styles: {}" => Some(("styles", "text-styles")),
        "  Total edit time:   {:.4}" => Some(("view", "total-edit-time-4")),
        "  Tree depth:        {}" => Some(("view", "tree-depth")),
        "  Unit type:" => Some(("common", "unit-type")),
        "  Updated (Julian):  {:.6}" => Some(("view", "updated-julian-6")),
        "  User elapsed:      {:.4}" => Some(("view", "user-elapsed-4")),
        "  User timer:        {}" => Some(("view", "user-timer")),
        "  User vars (int):   {} {} {} {} {}" => Some(("view", "user-vars-int")),
        "  User vars (real):  {:.6} {:.6} {:.6} {:.6} {:.6}" => Some(("view", "user-vars-real-6-6-6-6-6")),
        "  VP #{id}: {w:.1}×{h:.1} @ ({:.1},{:.1})  scale={scale:.4}  [{state}]" => Some(("view", "vp-id-w-1-h-1-1-1-scale-scale-4-state")),
        "  Version GUID:      {}" => Some(("view", "version-guid")),
        "  [{tag}] = {val}" => Some(("draw", "tag-val")),
        "  parse {}ms · purge {}ms · caches {}ms · xref {}ms · total {}ms" => Some(("file", "parse-ms-purge-ms-caches-ms-xref-ms-total-ms")),
        "  {:x} [{}]: {} value(s)" => Some(("view", "x-value-s")),
        "  {:x}: no xdata." => Some(("view", "x-no-xdata")),
        "  {k}: {n}" => Some(("inquiry", "k-n")),
        "  ⚠ No closed boundary found." => Some(("draw", "no-closed-boundary-found")),
        " (%{count} objects)" => Some(("modify", "count-objects")),
        " [Edge: Extend]" => Some(("modify", "edge-extend-indented-title-case")),
        "Opening a drawing by path is not available in the browser." => Some(("file", "opening-a-drawing-by-path-is-not-available-in")),
        "Prefix" => Some(("common", "prefix")),
        "Suffix" => Some(("common", "suffix")),
        "TCOUNT  increment <{increment}>:" => Some(("command", "tcount-increment-increment")),
        "TCOUNT  placement [Overwrite/Prefix/Suffix] <Overwrite>:" => Some(("command", "tcount-placement-overwrite-prefix-suffix-overw")),
        "TCOUNT  select text objects, then press Enter:" => Some(("command", "tcount-select-text-objects-then-press-enter")),
        "TCOUNT  starting number <{start}>:" => Some(("command", "tcount-starting-number-start")),
        "TCOUNT: numbered {n} text object(s) from {start} by {increment} ({placement_name})." => Some(("annotate", "tcount-numbered-n-text-object-s-from-start-by")),
        "TCOUNT: placement must be Overwrite, Prefix, or Suffix." => Some(("annotate", "tcount-placement-must-be-overwrite-prefix-or-s")),
        "\"%{file_name}\" could not be saved." => Some(("modal", "file-name-could-not-be-saved")),
        "\"%{file_name}\" was changed by another application." => Some(("modal", "file-name-was-changed-by-another-application")),
        "\"{}\" name already in use" => Some(("common", "name-already-in-use")),
        "#RRGGBB or blank" => Some(("common", "rrggbb-or-blank")),
        "%{cmd}  Select objects (%{count} selected, Enter to apply):" => Some(("selection", "cmd-select-objects-count-selected-enter-to-app")),
        "%{cmd}  Select objects:" => Some(("selection", "cmd-select-objects")),
        "%{count} objects selected" => Some(("properties", "count-objects-selected")),
        "%{count} selected layers" => Some(("modal", "count-selected-layers")),
        "%{count} steps available" => Some(("ui", "count-steps-available")),
        "%{label} history" => Some(("ui", "label-history")),
        "%{name}  select objects, then press Enter:" => Some(("command", "name-select-objects-then-press-enter")),
        "%{name}  which register?  [1-5]:" => Some(("command", "name-which-register-1-5")),
        "%{name}%{slot}  new value:" => Some(("command", "name-slot-new-value")),
        "%{n}  Specify center point:" => Some(("model", "n-specify-center-point")),
        "%{n}  Specify first corner:" => Some(("model", "n-specify-first-corner")),
        "%{n}  Specify height <Enter for default>:" => Some(("model", "n-specify-height-enter-for-default")),
        "%{n}  Specify opposite corner:" => Some(("model", "n-specify-opposite-corner")),
        "%{n}  Specify radius:" => Some(("model", "n-specify-radius")),
        "%{n}  Specify tube radius:" => Some(("model", "n-specify-tube-radius")),
        "%{n} VP" => Some(("ui", "n-vp")),
        "%{n} layers" => Some(("layers", "n-layers")),
        "%{n} saved layers" => Some(("layers", "n-saved-layers")),
        "%{prefix}TEXTEDIT Enter text edit mode [Single/Multiple] <%{mode}>:" => Some(("annotate", "prefix-textedit-enter-text-edit-mode-single-mu")),
        "%{prefix}TEXTEDITMODE Enter new value for TEXTEDITMODE <%{v}>:" => Some(("annotate", "prefix-texteditmode-enter-new-value-for-texted")),
        "%{scope} Visual Style" => Some(("properties", "scope-visual-style")),
        "%{subject} still %{has} %{count} %{obj}.\n\nDeleting will also remove %{those} from the drawing. Continue?" => Some(("modal", "subject-still-has-count-obj-deleting-will-also")),
        "(default)" => Some(("common", "default-parenthesized-lowercase")),
        "(no page setups)" => Some(("plot", "no-page-setups")),
        "(no table loaded)" => Some(("styles", "no-table-loaded")),
        "(none)" => Some(("common", "none-parenthesized-lowercase")),
        "*Cancel*" => Some(("command", "cancel")),
        "+ Add alias" => Some(("command", "add-alias")),
        ", inverted" => Some(("draw", "inverted")),
        "0 = variable" => Some(("styles", "value-0-variable")),
        "1st arrowhead (DIMBLK1)" => Some(("common", "value-1st-arrowhead-dimblk1")),
        "2-Point" => Some(("draw", "value-2-point")),
        "2D Solid" => Some(("draw", "value-2d-solid")),
        "2D Wireframe" => Some(("common", "value-2d-wireframe")),
        "2nd arrowhead (DIMBLK2)" => Some(("common", "value-2nd-arrowhead-dimblk2")),
        "3-Point" => Some(("draw", "value-3-point")),
        "3D Face" => Some(("properties", "value-3d-face")),
        "3D Orbit" => Some(("view", "value-3d-orbit")),
        "3D Orbit: drag with right mouse button." => Some(("view", "value-3d-orbit-drag-with-right-mouse-button")),
        "3D Polyline" => Some(("draw", "value-3d-polyline")),
        "3D Solid" => Some(("properties", "value-3d-solid")),
        "3D Visualization" => Some(("properties", "value-3d-visualization")),
        "3D Wireframe" => Some(("common", "value-3d-wireframe")),
        "3DALIGN: aligned the solid to the destination points." => Some(("common", "value-3dalign-aligned-the-solid-to-the-destination-p")),
        "3DALIGN: each point triple must be non-coincident and non-collinear." => Some(("common", "value-3dalign-each-point-triple-must-be-non-coincide")),
        "3DALIGN: select exactly one solid created this session." => Some(("common", "value-3dalign-select-exactly-one-solid-created-this")),
        "3DFace" => Some(("properties", "value-3dface")),
        "3DMIRROR  mirror plane  [X / Y / Z]:" => Some(("draw", "value-3dmirror-mirror-plane-x-y-z")),
        "3DMIRROR: added a mirror across the {} plane." => Some(("common", "value-3dmirror-added-a-mirror-across-the-plane")),
        "3DMIRROR: could not determine the solid's extent." => Some(("common", "value-3dmirror-could-not-determine-the-solid-s-exten")),
        "3DMIRROR: select exactly one solid created this session." => Some(("common", "value-3dmirror-select-exactly-one-solid-created-this")),
        "3DPOLY  Specify next point  [Close/Undo]:" => Some(("draw", "value-3dpoly-specify-next-point-close-undo")),
        "3DPOLY  Specify next point  [Undo]:" => Some(("draw", "value-3dpoly-specify-next-point-undo")),
        "3DPOLY  Specify start point of polyline:" => Some(("draw", "value-3dpoly-specify-start-point-of-polyline")),
        "3DROTATE  angle in degrees:" => Some(("draw", "value-3drotate-angle-in-degrees")),
        "3DROTATE  rotation axis  [X / Y / Z]:" => Some(("draw", "value-3drotate-rotation-axis-x-y-z")),
        "3DROTATE: could not determine the solid's extent." => Some(("common", "value-3drotate-could-not-determine-the-solid-s-exten")),
        "3DROTATE: rotated {angle_deg}° about the {} axis." => Some(("common", "value-3drotate-rotated-angle-deg-about-the-axis")),
        "3DROTATE: select exactly one solid created this session." => Some(("common", "value-3drotate-select-exactly-one-solid-created-this")),
        "<none>" => Some(("plot", "none")),
        "<previous>" => Some(("plot", "previous")),
        "= {v}" => Some(("inquiry", "v")),
        "A newer Open CAD Studio version is published on GitHub." => Some(("ui", "a-newer-open-cad-studio-version-is-published-o")),
        "AC Version" => Some(("properties", "ac-version")),
        "ACI Color Index" => Some(("styles", "aci-color-index")),
        "ACI:" => Some(("styles", "aci")),
        "ADDSELECTED: creating a new {kind} is not supported." => Some(("inquiry", "addselected-creating-a-new-kind-is-not-support")),
        "ADDSELECTED: selected object not found." => Some(("inquiry", "addselected-selected-object-not-found")),
        "ADJUST  [Brightness / Contrast / Fade]:" => Some(("view", "adjust-brightness-contrast-fade")),
        "ADJUST  brightness 0-100:" => Some(("view", "adjust-brightness-0-100")),
        "ADJUST  contrast 0-100:" => Some(("view", "adjust-contrast-0-100")),
        "ADJUST  fade 0-100:" => Some(("view", "adjust-fade-0-100")),
        "ADJUST: select raster image(s) first." => Some(("view", "adjust-select-raster-image-s-first")),
        "ADJUST: value must be 0-100." => Some(("view", "adjust-value-must-be-0-100")),
        "ADJUST: {action} = {v} on {changed} image(s)." => Some(("view", "adjust-action-v-on-changed-image-s")),
        "ALIGN  Scale objects based on alignment points? [Y/N]:" => Some(("modify", "align-scale-objects-based-on-alignment-points")),
        "ALIGN  Select objects (%{count} selected, Enter when done):" => Some(("modify", "align-select-objects-count-selected-enter-when")),
        "ALIGN  Specify 1st destination point:" => Some(("modify", "align-specify-1st-destination-point")),
        "ALIGN  Specify 1st source point:" => Some(("modify", "align-specify-1st-source-point")),
        "ALIGN  Specify 2nd destination point:" => Some(("modify", "align-specify-2nd-destination-point")),
        "ALIGN  Specify 2nd source point (Enter = translate only):" => Some(("modify", "align-specify-2nd-source-point-enter-translate")),
        "ALIGN: applied." => Some(("common", "align-applied")),
        "ANNOALLVISIBLE  new value [0/1]:" => Some(("view", "annoallvisible-new-value-0-1")),
        "ANNOALLVISIBLE: enter 0 or 1." => Some(("view", "annoallvisible-enter-0-or-1")),
        "ANNOAUTOSCALE  new value [-4..4]:" => Some(("view", "annoautoscale-new-value-4-4")),
        "ANNOSCALE  new annotation scale  (e.g. 1:50, 2:1, or a factor):" => Some(("view", "annoscale-new-annotation-scale-e-g-1-50-2-1-or")),
        "ANNOUPDATE: select annotation objects first." => Some(("view", "annoupdate-select-annotation-objects-first")),
        "ANNOUPDATE: updated {updated} object(s)." => Some(("view", "annoupdate-updated-updated-object-s")),
        "API incompatible" => Some(("plugins", "api-incompatible")),
        "ARC  Specify center:" => Some(("draw", "arc-specify-center")),
        "ARC  Specify end point  [c=(%{cx},%{cy}) r=%{r}]:" => Some(("draw", "arc-specify-end-point-c-cx-cy-r-r")),
        "ARC  Specify start point:" => Some(("draw", "arc-specify-start-point")),
        "ARC 3P  Specify end point:" => Some(("draw", "arc-3p-specify-end-point")),
        "ARC 3P  Specify second point on arc:" => Some(("draw", "arc-3p-specify-second-point-on-arc")),
        "ARC 3P  Specify start point:" => Some(("draw", "arc-3p-specify-start-point")),
        "ARC CSA  Click end direction or type arc span in degrees  [start=%{sa}]:" => Some(("draw", "arc-csa-click-end-direction-or-type-arc-span-i")),
        "ARC CSA  Specify center:" => Some(("draw", "arc-csa-specify-center")),
        "ARC CSA  Specify start point:" => Some(("draw", "arc-csa-specify-start-point")),
        "ARC CSL  Click chord end or type chord length  [r=%{r}]:" => Some(("draw", "arc-csl-click-chord-end-or-type-chord-length-r")),
        "ARC CSL  Specify center:" => Some(("draw", "arc-csl-specify-center")),
        "ARC CSL  Specify start point:" => Some(("draw", "arc-csl-specify-start-point")),
        "ARC Continue  No previous line or arc to continue." => Some(("draw", "arc-continue-no-previous-line-or-arc-to-contin")),
        "ARC Continue  Specify end point  [Ctrl = flip direction]:" => Some(("draw", "arc-continue-specify-end-point-ctrl-flip-direc")),
        "ARC SCA  Click end direction or type arc span in degrees  [start=%{sa}]:" => Some(("draw", "arc-sca-click-end-direction-or-type-arc-span-i")),
        "ARC SCA  Specify center:" => Some(("draw", "arc-sca-specify-center")),
        "ARC SCA  Specify start point:" => Some(("draw", "arc-sca-specify-start-point")),
        "ARC SCE  Specify center:" => Some(("draw", "arc-sce-specify-center")),
        "ARC SCE  Specify end point  [r=%{r}]:" => Some(("draw", "arc-sce-specify-end-point-r-r")),
        "ARC SCE  Specify start point:" => Some(("draw", "arc-sce-specify-start-point")),
        "ARC SCL  Click chord end or type chord length  [r=%{r}]:" => Some(("draw", "arc-scl-click-chord-end-or-type-chord-length-r")),
        "ARC SCL  Specify center:" => Some(("draw", "arc-scl-specify-center")),
        "ARC SCL  Specify start point:" => Some(("draw", "arc-scl-specify-start-point")),
        "ARC SEA  Specify angle (move cursor perpendicular to chord):" => Some(("draw", "arc-sea-specify-angle-move-cursor-perpendicula")),
        "ARC SEA  Specify end point:" => Some(("draw", "arc-sea-specify-end-point")),
        "ARC SEA  Specify start point:" => Some(("draw", "arc-sea-specify-start-point")),
        "ARC SED  Specify end point:" => Some(("draw", "arc-sed-specify-end-point")),
        "ARC SED  Specify start point:" => Some(("draw", "arc-sed-specify-start-point")),
        "ARC SED  Specify tangent direction at start:" => Some(("draw", "arc-sed-specify-tangent-direction-at-start")),
        "ARC SER  Click radius point or type radius value:" => Some(("draw", "arc-ser-click-radius-point-or-type-radius-valu")),
        "ARC SER  Specify end point:" => Some(("draw", "arc-ser-specify-end-point")),
        "ARC SER  Specify start point:" => Some(("draw", "arc-ser-specify-start-point")),
        "ARCHIVE: save the drawing first (it has no file path yet)." => Some(("file", "archive-save-the-drawing-first-it-has-no-file")),
        "ARCTEXT  text to place along the arc:" => Some(("annotate", "arctext-text-to-place-along-the-arc")),
        "ARCTEXT: no printable text." => Some(("annotate", "arctext-no-printable-text")),
        "ARCTEXT: placed {n} character(s) along the arc." => Some(("annotate", "arctext-placed-n-character-s-along-the-arc")),
        "ARCTEXT: select an arc first." => Some(("annotate", "arctext-select-an-arc-first")),
        "AREA  Specify first corner point (Enter to cancel):" => Some(("draw", "area-specify-first-corner-point-enter-to-cance")),
        "AREA  Specify next point (%{n} picked, Enter to calculate):" => Some(("draw", "area-specify-next-point-n-picked-enter-to-calc")),
        "ARRAY3D  Column spacing  [%{rows}×%{cols}×%{levels}, row=%{rs}]:" => Some(("modify", "array3d-column-spacing-rows-cols-levels-row-rs")),
        "ARRAY3D  Enter column count  [%{rows} rows]:" => Some(("modify", "array3d-enter-column-count-rows-rows")),
        "ARRAY3D  Enter level count  [%{rows}×%{cols}]:" => Some(("modify", "array3d-enter-level-count-rows-cols")),
        "ARRAY3D  Enter row count:" => Some(("modify", "array3d-enter-row-count")),
        "ARRAY3D  Level spacing  [%{rows}×%{cols}×%{levels}, r=%{rs} c=%{cs}]:" => Some(("modify", "array3d-level-spacing-rows-cols-levels-r-rs-c")),
        "ARRAY3D  Row spacing  [%{rows}×%{cols}×%{levels}]:" => Some(("modify", "array3d-row-spacing-rows-cols-levels")),
        "ARRAYPATH  Enter item count <{}>:" => Some(("modify", "arraypath-enter-item-count")),
        "ARRAYPATH  Select path entity  [{} objects]:" => Some(("modify", "arraypath-select-path-entity-objects")),
        "ARRAYPOLAR  Enter item count <{}>:" => Some(("modify", "arraypolar-enter-item-count")),
        "ARRAYPOLAR  Enter total angle in degrees <{:.0}>  [{count} items]:" => Some(("modify", "arraypolar-enter-total-angle-in-degrees-0-coun")),
        "ARRAYPOLAR  Specify center point  [{} objects]:" => Some(("modify", "arraypolar-specify-center-point-objects")),
        "ARRAYRECT  Column spacing <{:.0}>  [{rows}×{cols}, row={row_sp:.0}]:" => Some(("modify", "arrayrect-column-spacing-0-rows-cols-row-row-s")),
        "ARRAYRECT  Enter column count <{}>  [{rows} rows]:" => Some(("modify", "arrayrect-enter-column-count-rows-rows")),
        "ARRAYRECT  Enter row count <{}>:" => Some(("modify", "arrayrect-enter-row-count")),
        "ARRAYRECT  Row spacing <{:.0}>  [{rows}×{cols}]:" => Some(("modify", "arrayrect-row-spacing-0-rows-cols")),
        "ATTDEF  Enter attribute tag (no spaces):" => Some(("draw", "attdef-enter-attribute-tag-no-spaces")),
        "ATTDEF  Enter default value for '%{tag}' (Enter=blank):" => Some(("draw", "attdef-enter-default-value-for-tag-enter-blank")),
        "ATTDEF  Enter prompt for '%{tag}' (Enter=use tag):" => Some(("draw", "attdef-enter-prompt-for-tag-enter-use-tag")),
        "ATTDEF  Specify insertion point for '%{tag}':" => Some(("draw", "attdef-specify-insertion-point-for-tag")),
        "ATTDISP  attribute display  [On / Off / Normal]:" => Some(("draw", "attdisp-attribute-display-on-off-normal")),
        "ATTDISP {sub}: {count} attribute definition(s) updated." => Some(("draw", "attdisp-sub-count-attribute-definition-s-updat")),
        "ATTEDIT  Select block with attributes:" => Some(("modify", "attedit-select-block-with-attributes")),
        "ATTEDIT: no Insert entities in selection." => Some(("draw", "attedit-no-insert-entities-in-selection")),
        "ATTEDIT: select an Insert entity first." => Some(("draw", "attedit-select-an-insert-entity-first")),
        "ATTEDIT: tag '{tag_up}' not found in selection." => Some(("draw", "attedit-tag-tag-up-not-found-in-selection")),
        "ATTEDIT: updated {changed} attribute(s) [{tag_up}] = {new_val}." => Some(("draw", "attedit-updated-changed-attribute-s-tag-up-new")),
        "ATTSYNC  block name to sync:" => Some(("insert", "attsync-block-name-to-sync")),
        "ATTSYNC: no block named \"{arg}\"." => Some(("insert", "attsync-no-block-named-arg")),
        "ATTSYNC: synchronised {synced} insert(s) of \"{block}\" against {} attribute definition(s)." => Some(("insert", "attsync-synchronised-synced-insert-s-of-block")),
        "AUDIT: no issues found." => Some(("styles", "audit-no-issues-found")),
        "AUDIT: reference(s) to undefined block(s): {}" => Some(("styles", "audit-reference-s-to-undefined-block-s")),
        "AUDIT: reference(s) to undefined layer(s): {}" => Some(("styles", "audit-reference-s-to-undefined-layer-s")),
        "AUDIT: report only — no automatic repair performed." => Some(("styles", "audit-report-only-no-automatic-repair-performe")),
        "AUDIT: scanned {total} object(s)." => Some(("styles", "audit-scanned-total-object-s")),
        "About" => Some(("manage", "about")),
        "Above" => Some(("common", "above")),
        "Above text" => Some(("styles", "above-text")),
        "Accept" => Some(("common", "accept")),
        "Action" => Some(("properties", "action")),
        "Active" => Some(("layout", "active")),
        "Active UCS: {}  |  Named: {}" => Some(("layers", "active-ucs-named")),
        "Active UCS: {}  |  No named UCSs defined." => Some(("layers", "active-ucs-no-named-ucss-defined")),
        "Active Viewport" => Some(("properties", "active-viewport")),
        "Active dim style set to \"{name_arg}\"" => Some(("styles", "active-dim-style-set-to-name-arg")),
        "Add" => Some(("common", "add")),
        "Add Leader" => Some(("common", "add-leader")),
        "Add Scale" => Some(("annotate", "add-scale")),
        "Add Selected: drawing a new {kind} on layer \"{layer}\"." => Some(("inquiry", "add-selected-drawing-a-new-kind-on-layer-layer")),
        "Add from GitHub" => Some(("plugins", "add-from-github")),
        "Add leader" => Some(("styles", "add-leader")),
        "Add repository" => Some(("plugins", "add-repository")),
        "Added annotation scale {arg}." => Some(("view", "added-annotation-scale-arg")),
        "Added from GitHub" => Some(("plugins", "added-from-github")),
        "Adjust" => Some(("insert", "adjust")),
        "Attach External Reference" => Some(("insert", "xref-attach-dialog-title")),
        "Browse..." => Some(("insert", "xref-attach-browse")),
        "Reference Type" => Some(("insert", "xref-attach-reference-type")),
        "Uniform Scale" => Some(("insert", "xref-attach-uniform-scale")),
        "Insertion point" => Some(("insert", "xref-attach-insertion-point")),
        "Angle:" => Some(("insert", "xref-attach-angle")),
        "Block Unit" => Some(("insert", "xref-attach-block-unit")),
        "Unit:" => Some(("insert", "xref-attach-unit")),
        "Factor:" => Some(("insert", "xref-attach-factor")),
        "Found in:" => Some(("insert", "xref-attach-found-in")),
        "Saved path:" => Some(("insert", "xref-attach-saved-path")),
        "Show Details" => Some(("insert", "xref-attach-show-details")),
        "Hide Details" => Some(("insert", "xref-attach-hide-details")),
        "Select Reference File" => Some(("insert", "xref-attach-select-file")),
        "All Reference Files" => Some(("insert", "xref-attach-all-files")),
        "Inserts references to external files such as other drawings, raster images, and underlays." => Some(("insert", "xref-attach-help")),
        "Invalid input." => Some(("insert", "xref-attach-invalid-input")),
        "Insertion point X" => Some(("insert", "xref-insertion-point-x")),
        "Insertion point Y" => Some(("insert", "xref-insertion-point-y")),
        "Insertion point Z" => Some(("insert", "xref-insertion-point-z")),
        "Layer property overrides" => Some(("insert", "xref-layer-property-overrides")),
        "Adjust Colors for Background" => Some(("properties", "adjust-colors-for-background")),
        "Advanced" => Some(("properties", "advanced")),
        "Alias" => Some(("command", "alias-title-case")),
        "Align Leaders" => Some(("annotate", "align-leaders")),
        "Align space:" => Some(("common", "align-space")),
        "Aligned" => Some(("common", "aligned")),
        "Alignment" => Some(("common", "alignment-title-case")),
        "All" => Some(("common", "all")),
        "All layers thawed." => Some(("layers", "all-layers-thawed")),
        "All layers turned on." => Some(("layers", "all-layers-turned-on")),
        "Alt enabled" => Some(("properties", "alt-enabled")),
        "Alt format" => Some(("properties", "alt-format")),
        "Alt precision" => Some(("properties", "alt-precision")),
        "Alt prefix/suffix" => Some(("properties", "alt-prefix-suffix")),
        "Alt roundoff" => Some(("properties", "alt-roundoff")),
        "Alt scale factor" => Some(("properties", "alt-scale-factor")),
        "Alt suppress leading zeros" => Some(("properties", "alt-suppress-leading-zeros")),
        "Alt suppress trailing zeros" => Some(("properties", "alt-suppress-trailing-zeros")),
        "Alternate" => Some(("common", "alternate")),
        "Alternate Units" => Some(("common", "alternate-units")),
        "Ambient" => Some(("properties", "ambient")),
        "Angle" => Some(("common", "angle")),
        "Angle = %{angle}°" => Some(("inquiry", "angle-angle")),
        "Angle = 0.0000° (degenerate rays)" => Some(("inquiry", "angle-0-0000-degenerate-rays")),
        "Angle format" => Some(("properties", "angle-format")),
        "Angle precision" => Some(("properties", "angle-precision")),
        "Angle of revolution" => Some(("properties", "angle-of-revolution")),
        "Angles" => Some(("model", "angles")),
        "Angular" => Some(("annotate", "angular")),
        "Angular decimals (DIMADEC)" => Some(("common", "angular-decimals-dimadec")),
        "Angular unit (DIMAUNIT)" => Some(("common", "angular-unit-dimaunit")),
        "Angular zero supp (DIMAZIN)" => Some(("common", "angular-zero-supp-dimazin")),
        "Annotate" => Some(("annotate", "annotate")),
        "Annotation" => Some(("common", "annotation")),
        "Annotation / Viewport Scale\nClick to change" => Some(("ui", "annotation-viewport-scale-click-to-change")),
        "Annotation Object Scale" => Some(("modify", "annotation-object-scale")),
        "Annotation Scale" => Some(("ui", "annotation-scale")),
        "Annotation Scaling" => Some(("annotate", "annotation-scaling")),
        "Annotation scale" => Some(("properties", "annotation-scale")),
        "Annotation scale: {arg}" => Some(("view", "annotation-scale-arg")),
        "Annotation scales: {}" => Some(("view", "annotation-scales")),
        "Annotative" => Some(("common", "annotative")),
        "Annotative scale" => Some(("properties", "annotative-scale")),
        "Apparent Intersection" => Some(("common", "apparent-intersection")),
        "Append to current selection" => Some(("selection", "append-to-current-selection")),
        "Application" => Some(("manage", "application")),
        "Apply" => Some(("common", "apply")),
        "Apply cell" => Some(("common", "apply-cell")),
        "Apply margins" => Some(("common", "apply-margins")),
        "Apply to ACI" => Some(("styles", "apply-to-aci")),
        "Arc" => Some(("common", "arc")),
        "Arc End (deg)" => Some(("properties", "arc-end-deg")),
        "Arc Start (deg)" => Some(("properties", "arc-start-deg")),
        "Arc X" => Some(("properties", "arc-x")),
        "Arc Y" => Some(("properties", "arc-y")),
        "Arc Z" => Some(("properties", "arc-z")),
        "Arc length" => Some(("properties", "arc-length")),
        "Arc length symbol (DIMARCSYM)" => Some(("draw", "arc-length-symbol-dimarcsym")),
        "Arc-Aligned Text" => Some(("properties", "arc-aligned-text")),
        "Arch" => Some(("common", "arch")),
        "Architectural" => Some(("common", "architectural")),
        "Area" => Some(("common", "area")),
        "Area = %{area},  Perimeter = %{perimeter}" => Some(("inquiry", "area-area-perimeter-perimeter")),
        "Array Insert" => Some(("insert", "array-insert")),
        "Arrow" => Some(("properties", "arrow")),
        "Arrow size" => Some(("common", "arrow-size")),
        "Arrow size (DIMASZ)" => Some(("styles", "arrow-size-dimasz")),
        "Arrowhead" => Some(("common", "arrowhead")),
        "Arrowhead (DIMBLK)" => Some(("styles", "arrowhead-dimblk")),
        "Arrowhead Size" => Some(("properties", "arrowhead-size")),
        "Arrowhead block:" => Some(("styles", "arrowhead-block")),
        "Arrowhead size" => Some(("common", "arrowhead-size")),
        "Arrowhead size:" => Some(("styles", "arrowhead-size")),
        "Arrows" => Some(("styles", "arrows")),
        "Arrows out first" => Some(("styles", "arrows-out-first")),
        "As displayed" => Some(("common", "as-displayed")),
        "Associative" => Some(("properties", "associative")),
        "Attachment" => Some(("properties", "attachment")),
        "At first ext" => Some(("styles", "at-first-ext")),
        "At least" => Some(("properties", "at-least")),
        "At second ext" => Some(("styles", "at-second-ext")),
        "Attach" => Some(("insert", "attach")),
        "Attach XREF" => Some(("insert", "attach-xref")),
        "Attachment direction:" => Some(("common", "attachment-direction")),
        "Attachment type" => Some(("properties", "attachment-type")),
        "Attenuation" => Some(("properties", "attenuation")),
        "Attribute" => Some(("common", "attribute")),
        "Attribute Definition" => Some(("properties", "attribute-definition")),
        "Attribute Editor" => Some(("insert", "attribute-editor")),
        "AttributeDefinition" => Some(("properties", "attributedefinition")),
        "Attributes" => Some(("common", "attributes")),
        "Audit" => Some(("manage", "audit")),
        "Auto" => Some(("common", "auto")),
        "Point\nClouds" => Some(("insert", "point-clouds")),
        "Automatically Add Scales" => Some(("ui", "automatically-add-scales")),
        "Autosaved 1 drawing" => Some(("file", "autosaved-1-drawing")),
        "Available plugins" => Some(("plugins", "available-plugins")),
        "Axis" => Some(("draw", "axis")),
        "Axis Point" => Some(("model", "axis-point")),
        "Axis Vector" => Some(("model", "axis-vector")),
        "Axis, End" => Some(("draw", "axis-end")),
        "Axis direction X" => Some(("properties", "axis-direction-x")),
        "Axis direction Y" => Some(("properties", "axis-direction-y")),
        "Axis direction Z" => Some(("properties", "axis-direction-z")),
        "Axis position X" => Some(("properties", "axis-position-x")),
        "Axis position Y" => Some(("properties", "axis-position-y")),
        "Axis position Z" => Some(("properties", "axis-position-z")),
        "BACKGROUND  colour [Default/Black/DarkGray/Gray/LightGray/White] or R G B (0–255):" => Some(("file", "background-colour-default-black-darkgray-gray")),
        "BASE  Specify base point:" => Some(("insert", "base-specify-base-point")),
        "BEDIT  Select block reference to edit:" => Some(("modify", "bedit-select-block-reference-to-edit")),
        "BEDIT: Block \"{}\" edit discarded." => Some(("inquiry", "bedit-block-edit-discarded")),
        "BEDIT: Block \"{}\" saved. All references updated." => Some(("inquiry", "bedit-block-saved-all-references-updated")),
        "BEDIT: Editing block \"{}\". Use Save Block or Discard to finish." => Some(("inquiry", "bedit-editing-block-use-save-block-or-discard")),
        "BEDIT: block \"{}\" not found." => Some(("inquiry", "bedit-block-not-found")),
        "BEDIT: block tab \"{name}\" is not open." => Some(("common", "bedit-block-tab-name-is-not-open")),
        "BEDIT: cannot edit an external reference (xref)." => Some(("inquiry", "bedit-cannot-edit-an-external-reference-xref")),
        "BEDIT: finish the active REFEDIT (REFCLOSE) first." => Some(("inquiry", "bedit-finish-the-active-refedit-refclose-first")),
        "BEDIT: selected object is not a block reference." => Some(("inquiry", "bedit-selected-object-is-not-a-block-reference")),
        "BEDIT_DISCARD: invalid block editor state." => Some(("inquiry", "bedit-discard-invalid-block-editor-state")),
        "BEDIT_DISCARD: no block editor is open." => Some(("inquiry", "bedit-discard-no-block-editor-is-open")),
        "BEDIT_SAVE: invalid block editor state." => Some(("inquiry", "bedit-save-invalid-block-editor-state")),
        "BEDIT_SAVE: no block editor is open." => Some(("inquiry", "bedit-save-no-block-editor-is-open")),
        "BLEND  Enter continuity [Tangent/Curvature] <%{c}>:" => Some(("modify", "blend-enter-continuity-tangent-curvature-c")),
        "BLEND  Select first open curve  [Continuity=%{c}]:" => Some(("modify", "blend-select-first-open-curve-continuity-c")),
        "BLEND  Select second open curve  [Continuity=%{c}]:" => Some(("modify", "blend-select-second-open-curve-continuity-c")),
        "BLOCK  Enter block name  [%{count} objects selected]:" => Some(("insert", "block-enter-block-name-count-objects-selected")),
        "BLOCK  Specify base point for \"%{name}\"  [%{count} objects]:" => Some(("insert", "block-specify-base-point-for-name-count-object")),
        "BOUNDARY  Pick internal point:%{miss}" => Some(("draw", "boundary-pick-internal-point-miss")),
        "BREAK  Select object:" => Some(("modify", "break-select-object")),
        "BREAK  Specify first break point:" => Some(("modify", "break-specify-first-break-point")),
        "BREAK  Specify second break point:" => Some(("modify", "break-specify-second-break-point")),
        "BREAK: entity type not supported." => Some(("common", "break-entity-type-not-supported")),
        "BREAK: {} fragment(s)." => Some(("common", "break-fragment-s")),
        "BREAKATPOINT  Select object:" => Some(("modify", "breakatpoint-select-object")),
        "BREAKATPOINT  Specify break point:" => Some(("modify", "breakatpoint-specify-break-point")),
        "Back" => Some(("common", "back")),
        "Back Line" => Some(("properties", "back-line")),
        "Background" => Some(("properties", "background")),
        "Background color" => Some(("common", "background-color")),
        "Background mask" => Some(("properties", "background-mask")),
        "Background reset to default." => Some(("file", "background-reset-to-default")),
        "Background transparency" => Some(("properties", "background-transparency")),
        "Background: rgb({}, {}, {})" => Some(("file", "background-rgb")),
        "Backward" => Some(("common", "backward")),
        "Backwards" => Some(("ui", "backwards")),
        "Base X" => Some(("properties", "base-x")),
        "Base Y" => Some(("properties", "base-y")),
        "Base Z" => Some(("properties", "base-z")),
        "Base point ({}, {}, {}) set for {space}." => Some(("insert", "base-point-set-for-space")),
        "Base point X" => Some(("properties", "base-point-x")),
        "Base point Y" => Some(("properties", "base-point-y")),
        "Base point Z" => Some(("properties", "base-point-z")),
        "Base radius" => Some(("properties", "base-radius")),
        "BasePoint" => Some(("styles", "basepoint")),
        "Baseline" => Some(("common", "baseline")),
        "Before text" => Some(("styles", "before-text")),
        "Below" => Some(("common", "below")),
        "Best fit" => Some(("styles", "best-fit")),
        "Big Font" => Some(("properties", "big-font")),
        "Big Font:" => Some(("styles", "big-font")),
        "Blend Creases" => Some(("properties", "blend-creases")),
        "Block" => Some(("common", "block")),
        "Block \"%{name}\" has no entities." => Some(("insert", "block-name-has-no-entities")),
        "Block \"%{name}\" not found." => Some(("insert", "block-name-not-found")),
        "Block \"%{name}\" produced no exportable entities." => Some(("insert", "block-name-produced-no-exportable-entities")),
        "Block \"{name}\" created." => Some(("common", "block-name-created")),
        "Block \"{orig}\" → \"{new_name}\"" => Some(("common", "block-orig-new-name")),
        "Block Content" => Some(("common", "block-content")),
        "Block End" => Some(("properties", "block-end")),
        "Block Reference" => Some(("properties", "block-reference")),
        "Block color" => Some(("common", "block-color")),
        "Block color (ACI):" => Some(("insert", "block-color-aci")),
        "Block connection" => Some(("common", "block-connection")),
        "Block connection:" => Some(("insert", "block-connection")),
        "Block contents" => Some(("properties", "block-contents")),
        "Block rotation" => Some(("common", "block-rotation")),
        "Block rotation:" => Some(("insert", "block-rotation")),
        "Block scale" => Some(("properties", "block-scale")),
        "Block scale X:" => Some(("modify", "block-scale-x")),
        "Block scale Y:" => Some(("modify", "block-scale-y")),
        "Block scale Z:" => Some(("modify", "block-scale-z")),
        "Block:" => Some(("insert", "block")),
        "Block:  %{block}" => Some(("ui", "block-block")),
        "BlockEnd" => Some(("properties", "blockend")),
        "BlockExtents" => Some(("styles", "blockextents")),
        "Blocks" => Some(("common", "blocks")),
        "Blocks ({}) — insert with INSERT <name>:  {}" => Some(("insert", "blocks-insert-with-insert-name")),
        "Blocks ({}): {}" => Some(("insert", "blocks")),
        "Blue" => Some(("common", "blue")),
        "Bulge" => Some(("common", "bulge")),
        "Body" => Some(("properties", "body")),
        "Bold" => Some(("properties", "bold")),
        "Book" => Some(("properties", "book")),
        "Boolean failed — the solids may not overlap." => Some(("common", "boolean-failed-the-solids-may-not-overlap")),
        "Boolean: select exactly two solids created this session." => Some(("common", "boolean-select-exactly-two-solids-created-this")),
        "Bottom" => Some(("common", "bottom")),
        "Bottom Center" => Some(("common", "bottom-center-title-case")),
        "Bottom Height" => Some(("properties", "bottom-height")),
        "Bottom Left" => Some(("common", "bottom-left-title-case")),
        "Bottom Right" => Some(("common", "bottom-right-title-case")),
        "Bottom attachment:" => Some(("common", "bottom-attachment")),
        "Bottom center" => Some(("common", "bottom-center-sentence-case")),
        "Bottom left" => Some(("common", "bottom-left-sentence-case")),
        "Bottom right" => Some(("common", "bottom-right-sentence-case")),
        "BottomCenter" => Some(("common", "bottomcenter")),
        "BottomLeft" => Some(("common", "bottomleft")),
        "BottomLine" => Some(("styles", "bottomline")),
        "BottomOfBottomLine" => Some(("styles", "bottomofbottomline")),
        "BottomOfTopLineUnderlineAll" => Some(("styles", "bottomoftoplineunderlineall")),
        "BottomOfTopLineUnderlineBottomLine" => Some(("styles", "bottomoftoplineunderlinebottomline")),
        "BottomOfTopLineUnderlineTopLine" => Some(("styles", "bottomoftoplineunderlinetopline")),
        "BottomRight" => Some(("common", "bottomright")),
        "Boundary" => Some(("draw", "boundary")),
        "Boundary edges" => Some(("modify", "boundary-edges")),
        "Boundary width" => Some(("properties", "boundary-width")),
        "Box" => Some(("common", "box")),
        "Break" => Some(("common", "break")),
        "Break gap size:" => Some(("modify", "break-gap-size")),
        "Break heights" => Some(("properties", "break-heights")),
        "Brightness" => Some(("common", "brightness")),
        "Bring Above Object" => Some(("ui", "bring-above-object")),
        "Bring to Front" => Some(("ui", "bring-to-front")),
        "Browse, install, and manage add-ons. Select one to view its README." => Some(("plugins", "browse-install-and-manage-add-ons-select-one-t")),
        "Browser storage" => Some(("options", "browser-storage")),
        "Build" => Some(("ui", "build")),
        "Building scene caches…" => Some(("ui", "building-scene-caches")),
        "Bump Map" => Some(("properties", "bump-map")),
        "By annotation scale" => Some(("styles", "by-annotation-scale")),
        "By layer" => Some(("common", "by-layer")),
        "By style" => Some(("properties", "by-style")),
        "ByBlock" => Some(("common", "byblock")),
        "ByColor" => Some(("common", "bycolor")),
        "ByLayer" => Some(("common", "bylayer")),
        "C++ Class" => Some(("properties", "c-class")),
        "CAD application for Architecture & Engineering" => Some(("ui", "cad-application-for-architecture-engineering")),
        "CAL  expression  (e.g. (2+3)*4):" => Some(("inquiry", "cal-expression-e-g-2-3-4")),
        "CAL: {e}" => Some(("inquiry", "cal-e")),
        "CDIMSTY  new current dimension style name:" => Some(("styles", "cdimsty-new-current-dimension-style-name")),
        "CDIMSTY = \"{cur}\"" => Some(("styles", "cdimsty-cur")),
        "CDIMSTY: dim style '{}' not found." => Some(("styles", "cdimsty-dim-style-not-found")),
        "CELTSCALE  new current-object line-type scale:" => Some(("styles", "celtscale-new-current-object-line-type-scale")),
        "CELTSCALE = {v:.4}" => Some(("styles", "celtscale-v-4")),
        "CELTSCALE set to {v:.4}" => Some(("styles", "celtscale-set-to-v-4")),
        "CELTSCALE: value must be positive." => Some(("styles", "celtscale-value-must-be-positive")),
        "CENTERLINE  Select first line:" => Some(("draw", "centerline-select-first-line")),
        "CENTERLINE  Select second line:" => Some(("draw", "centerline-select-second-line")),
        "CHAMFER  Enter first chamfer distance <%{d1}>:" => Some(("modify", "chamfer-enter-first-chamfer-distance-d1")),
        "CHAMFER  Enter second chamfer distance <%{d2}>:" => Some(("modify", "chamfer-enter-second-chamfer-distance-d2")),
        "CHAMFER  Select first line  [D1=%{d1} D2=%{d2}]:" => Some(("modify", "chamfer-select-first-line-d1-d1-d2-d2")),
        "CHAMFER  Select second line  [D1=%{d1} D2=%{d2}]:" => Some(("modify", "chamfer-select-second-line-d1-d1-d2-d2")),
        "CHAMFER  Select the adjacent polyline segment  [D1=%{d1} D2=%{d2}]:" => Some(("modify", "chamfer-select-the-adjacent-polyline-segment-d")),
        "CHPROP  new colour (name / 1-255 / ByLayer):" => Some(("styles", "chprop-new-colour-name-1-255-bylayer")),
        "CHPROP  new layer name:" => Some(("styles", "chprop-new-layer-name")),
        "CHPROP  new linetype name:" => Some(("styles", "chprop-new-linetype-name")),
        "CHPROP  new linetype scale:" => Some(("styles", "chprop-new-linetype-scale")),
        "CHPROP  property  [Layer / Color / Linetype / LtScale / Transparency]:" => Some(("styles", "chprop-property-layer-color-linetype-ltscale-t")),
        "CHPROP  transparency 0-90:" => Some(("styles", "chprop-transparency-0-90")),
        "CHPROP: invalid value '{}' for {}." => Some(("styles", "chprop-invalid-value-for")),
        "CHPROP: no entities selected." => Some(("styles", "chprop-no-entities-selected")),
        "CHPROP: unknown property '{}'. Use: LAYER COLOR LINETYPE LTSCALE TRANSPARENCY" => Some(("styles", "chprop-unknown-property-use-layer-color-linety")),
        "CHPROP: {} entity/entities updated." => Some(("styles", "chprop-entity-entities-updated")),
        "CIRCLE  Specify center point:" => Some(("draw", "circle-specify-center-point")),
        "CIRCLE  Specify radius or type value  <%{r}>  [center (%{cx},%{cy})]:" => Some(("draw", "circle-specify-radius-or-type-value-r-center-c")),
        "CIRCLE 2P  Specify first end of diameter:" => Some(("draw", "circle-2p-specify-first-end-of-diameter")),
        "CIRCLE 2P  Specify second end of diameter:" => Some(("draw", "circle-2p-specify-second-end-of-diameter")),
        "CIRCLE 3P  Specify first point:" => Some(("draw", "circle-3p-specify-first-point")),
        "CIRCLE 3P  Specify second point:" => Some(("draw", "circle-3p-specify-second-point")),
        "CIRCLE 3P  Specify third point:" => Some(("draw", "circle-3p-specify-third-point")),
        "CIRCLE CD  Specify center point:" => Some(("draw", "circle-cd-specify-center-point")),
        "CIRCLE CD  Specify diameter or type value  <{:.4}>  [center ({:.3},{:.3})]:" => Some(("draw", "circle-cd-specify-diameter-or-type-value-4-cen")),
        "CIRCLE TTR  Select first tangent object:" => Some(("draw", "circle-ttr-select-first-tangent-object")),
        "CIRCLE TTR  Select second tangent object:" => Some(("draw", "circle-ttr-select-second-tangent-object")),
        "CIRCLE TTR  Specify radius:" => Some(("draw", "circle-ttr-specify-radius")),
        "CIRCLE TTT  Select first tangent object:" => Some(("draw", "circle-ttt-select-first-tangent-object")),
        "CIRCLE TTT  Select second tangent object:" => Some(("draw", "circle-ttt-select-second-tangent-object")),
        "CIRCLE TTT  Select third tangent object:" => Some(("draw", "circle-ttt-select-third-tangent-object")),
        "CLAYER  new current layer name:" => Some(("styles", "clayer-new-current-layer-name")),
        "CLAYER = \"{cur}\"" => Some(("styles", "clayer-cur")),
        "CLAYER set to \"{name_arg}\"" => Some(("styles", "clayer-set-to-name-arg")),
        "CLAYER: layer '{}' not found." => Some(("styles", "clayer-layer-not-found")),
        "COLOR  new object colour  [ByLayer / ByBlock / 1-255 / red / yellow / green / cyan / blue / magenta / white]:" => Some(("styles", "color-new-object-colour-bylayer-byblock-1-255")),
        "COLORSCHEME: unknown theme '{}'. Type COLORSCHEME LIST for options." => Some(("view", "colorscheme-unknown-theme-type-colorscheme-lis")),
        "CONVTOSURFACE: converted {n} solid(s) to surface(s)." => Some(("common", "convtosurface-converted-n-solid-s-to-surface-s")),
        "CONVTOSURFACE: select a solid created this session." => Some(("common", "convtosurface-select-a-solid-created-this-sess")),
        "COORDS = {mode} ({label})" => Some(("common", "coords-mode-label")),
        "COPY  Enter number of items to array:" => Some(("modify", "copy-enter-number-of-items-to-array")),
        "COPY  Specify base point  [%{count} objects]:" => Some(("draw", "copy-specify-base-point-count-objects")),
        "COPY  Specify destination  [%{count} copies so far | Array | Enter=done | base %{bx},%{by}]:" => Some(("common", "copy-specify-destination-count-copies-so-far-a")),
        "COPY  Specify second point for %{n}-item array  [base %{bx},%{by}]:" => Some(("modify", "copy-specify-second-point-for-n-item-array-bas")),
        "COPYBASE  Specify base point:" => Some(("clipboard", "copybase-specify-base-point")),
        "COUNT  tally  [All (by type) / by Layer]:" => Some(("inquiry", "count-tally-all-by-type-by-layer")),
        "COUNT: {total} entity(ies) total." => Some(("inquiry", "count-total-entity-ies-total")),
        "CUIEXPORT  file to save shortcuts to:" => Some(("view", "cuiexport-file-to-save-shortcuts-to")),
        "CUIEXPORT: cannot write \"{path}\": {e}" => Some(("view", "cuiexport-cannot-write-path-e")),
        "CUIEXPORT: wrote {count} shortcut(s) to \"{path}\"." => Some(("view", "cuiexport-wrote-count-shortcut-s-to-path")),
        "CUIIMPORT  shortcuts file to load:" => Some(("view", "cuiimport-shortcuts-file-to-load")),
        "CUIIMPORT: cannot read \"{path}\": {e}" => Some(("view", "cuiimport-cannot-read-path-e")),
        "CUIIMPORT: loaded {n} shortcut(s) from \"{path}\"." => Some(("view", "cuiimport-loaded-n-shortcut-s-from-path")),
        "CV Hull" => Some(("model", "cv-hull")),
        "Camera" => Some(("properties", "camera")),
        "Cancel" => Some(("common", "cancel")),
        "Cancel active command" => Some(("common", "cancel-active-command")),
        "Cannot add a vertex here." => Some(("command", "cannot-add-a-vertex-here")),
        "Cannot break at this vertex." => Some(("command", "cannot-break-at-this-vertex")),
        "Cannot delete a style that is current or in use." => Some(("common", "cannot-delete-a-style-that-is-current-or-in-us")),
        "Cannot delete the Model layout." => Some(("common", "cannot-delete-the-model-layout")),
        "Cannot delete the Standard style." => Some(("common", "cannot-delete-the-standard-style")),
        "Cannot delete the current annotation scale ({arg})." => Some(("view", "cannot-delete-the-current-annotation-scale-arg")),
        "Cannot place the new vertex." => Some(("command", "cannot-place-the-new-vertex")),
        "Cannot rename the Model layout." => Some(("common", "cannot-rename-the-model-layout")),
        "Cannot rename the Standard style." => Some(("common", "cannot-rename-the-standard-style")),
        "Cascade" => Some(("view", "cascade")),
        "Cast Shadows" => Some(("properties", "cast-shadows")),
        "Catchment tagged successfully." => Some(("common", "catchment-tagged-successfully")),
        "Center" => Some(("common", "center")),
        "Center Line" => Some(("draw", "center-line")),
        "Center Mark" => Some(("draw", "center-mark")),
        "Center X" => Some(("properties", "center-x")),
        "Center Y" => Some(("properties", "center-y")),
        "Center Z" => Some(("properties", "center-z")),
        "Center mark (DIMCEN)" => Some(("common", "center-mark-dimcen")),
        "Center the plot" => Some(("plot", "center-the-plot")),
        "Center, Axes" => Some(("draw", "center-axes")),
        "Center, Diameter" => Some(("draw", "center-diameter")),
        "Center, Radius" => Some(("draw", "center-radius")),
        "Center, Start, Angle" => Some(("draw", "center-start-angle")),
        "Center, Start, End" => Some(("draw", "center-start-end")),
        "Center, Start, Length" => Some(("draw", "center-start-length")),
        "CenterOfText" => Some(("styles", "centeroftext")),
        "CenterOfTextOverline" => Some(("styles", "centeroftextoverline")),
        "Centered" => Some(("common", "centered")),
        "Centimeters" => Some(("common", "centimeters")),
        "Centroid" => Some(("properties", "centroid")),
        "Chamfer" => Some(("common", "chamfer")),
        "Changelog" => Some(("common", "changelog")),
        "Changes affect the saved state only; the drawing is unchanged until Restore." => Some(("layers", "changes-affect-the-saved-state-only-the-drawin")),
        "Changing a base colour switches to Custom. Iced generates every component shade from these six colours." => Some(("common", "changing-a-base-colour-switches-to-custom-iced")),
        "Character Set" => Some(("properties", "character-set")),
        "Character Spacing" => Some(("properties", "character-spacing")),
        "Check your internet or proxy connection, then retry. Manually added repositories remain available." => Some(("plugins", "check-your-internet-or-proxy-connection-then-r")),
        "Choose New to capture the current layer settings." => Some(("layers", "choose-new-to-capture-the-current-layer-settin")),
        "Chord" => Some(("properties", "chord")),
        "Chord X" => Some(("properties", "chord-x")),
        "Chord Y" => Some(("properties", "chord-y")),
        "Chord Z" => Some(("properties", "chord-z")),
        "Circle" => Some(("common", "circle")),
        "Circumference" => Some(("properties", "circumference")),
        "Circumscribed" => Some(("draw", "circumscribed")),
        "Class" => Some(("properties", "class")),
        "Class / Entity" => Some(("model", "class-entity")),
        "Class ID" => Some(("properties", "class-id")),
        "Class Version" => Some(("common", "class-version")),
        "Classification Scheme" => Some(("properties", "classification-scheme")),
        "Clean Screen" => Some(("ui", "clean-screen")),
        "Clean Screen\nHide ribbon and panels" => Some(("ui", "clean-screen-hide-ribbon-and-panels")),
        "Cleanup" => Some(("manage", "cleanup")),
        "Clear" => Some(("common", "clear")),
        "Clear All" => Some(("common", "clear-all")),
        "Clear Table" => Some(("styles", "clear-table")),
        "Click a scale to add or remove the object's representation for it." => Some(("styles", "click-a-scale-to-add-or-remove-the-object-s-re")),
        "Clip" => Some(("common", "clip")),
        "Clip inverted" => Some(("properties", "clip-inverted")),
        "Clipboard" => Some(("common", "clipboard")),
        "Clipboard is empty." => Some(("common", "clipboard-is-empty")),
        "Clipping" => Some(("properties", "clipping")),
        "Clippings" => Some(("properties", "clippings")),
        "Close" => Some(("common", "close")),
        "Closed" => Some(("properties", "closed")),
        "Closed filled" => Some(("common", "closed-filled")),
        "Collapsed" => Some(("ui", "collapsed")),
        "Collect Leaders" => Some(("annotate", "collect-leaders")),
        "Color" => Some(("common", "color")),
        "Color-dependent plot styles" => Some(("properties", "color-dependent-plot-styles")),
        "Color 1" => Some(("properties", "color-1")),
        "Color 2" => Some(("properties", "color-2")),
        "Color Book" => Some(("properties", "color-book")),
        "Color Name" => Some(("properties", "color-name")),
        "Color Temperature" => Some(("properties", "color-temperature")),
        "Color override (#RRGGBB):" => Some(("styles", "color-override-rrggbb")),
        "Color scheme set to '{name}'." => Some(("view", "color-scheme-set-to-name")),
        "Color {}" => Some(("ui", "color")),
        "Column count" => Some(("properties", "column-count")),
        "Column gutter" => Some(("properties", "column-gutter")),
        "Column width" => Some(("properties", "column-width")),
        "Columns" => Some(("properties", "columns")),
        "Command" => Some(("command", "command")),
        "Command Aliases" => Some(("command", "command-aliases")),
        "Command cancelled because the active drawing space changed." => Some(("common", "command-cancelled-because-the-active-drawing-s")),
        "Command history navigation" => Some(("common", "command-history-navigation")),
        "Commit date" => Some(("ui", "commit-date")),
        "Command:" => Some(("common", "command-label-title-case")),
        "Commands:  %{cmds}" => Some(("plugins", "commands-cmds")),
        "Compact" => Some(("ui", "compact")),
        "Conceptual" => Some(("common", "conceptual")),
        "Cone" => Some(("common", "cone")),
        "Connecting securely using your system certificate settings." => Some(("plugins", "connecting-securely-using-your-system-certific")),
        "Constant" => Some(("properties", "constant")),
        "ConstantMultiLine" => Some(("properties", "constantmultiline")),
        "Constrain" => Some(("properties", "constrain")),
        "Content" => Some(("common", "content")),
        "Content\nBrowser" => Some(("insert", "content-browser")),
        "Content type:" => Some(("common", "content-type")),
        "ContentFirst" => Some(("styles", "contentfirst")),
        "Contents" => Some(("properties", "contents")),
        "Continue" => Some(("common", "continue")),
        "Continuity" => Some(("modify", "continuity")),
        "Contrast" => Some(("common", "contrast")),
        "Control Point" => Some(("properties", "control-point")),
        "Control Point Count" => Some(("properties", "control-point-count")),
        "Control Point X" => Some(("properties", "control-point-x")),
        "Control Point Y" => Some(("properties", "control-point-y")),
        "Control Point Z" => Some(("properties", "control-point-z")),
        "Control Vertices" => Some(("properties", "control-vertices")),
        "Control point X" => Some(("properties", "control-point-x-sentence-case")),
        "Control point Y" => Some(("properties", "control-point-y-sentence-case")),
        "Control point Z" => Some(("properties", "control-point-z-sentence-case")),
        "Coordinates" => Some(("common", "coordinates")),
        "Coordination Model" => Some(("properties", "coordination-model")),
        "Copied path: {}" => Some(("common", "copied-path")),
        "Copied selected text to clipboard." => Some(("insert", "copied-selected-text-to-clipboard")),
        "Copies" => Some(("plot", "copies")),
        "Copy" => Some(("common", "copy")),
        "Copy Info" => Some(("ui", "copy-info")),
        "Copy details" => Some(("plugins", "copy-details")),
        "Copy to Clipboard" => Some(("clipboard", "copy-to-clipboard")),
        "Could not open file location: {error}" => Some(("common", "could-not-open-file-location-error")),
        "Could not rename block \"{orig}\"" => Some(("common", "could-not-rename-block-orig")),
        "Could not set default app: {err}" => Some(("common", "could-not-set-default-app-err")),
        "Creased Edges" => Some(("properties", "creased-edges")),
        "Create Block" => Some(("insert", "create-block")),
        "Created new CTB table, ACI {aci} updated." => Some(("file", "created-new-ctb-table-aci-aci-updated")),
        "Croppings" => Some(("properties", "croppings")),
        "Crossing" => Some(("common", "crossing")),
        "Cumulative area" => Some(("properties", "cumulative-area")),
        "Current Color Scheme" => Some(("properties", "current-color-scheme")),
        "Current MLeader style: {}" => Some(("layers", "current-mleader-style")),
        "Current Vertex" => Some(("properties", "current-vertex-title-case")),
        "Current Control point" => Some(("properties", "current-control-point")),
        "Current fit point" => Some(("properties", "current-fit-point")),
        "CV frame" => Some(("properties", "cv-frame")),
        "Current annotation scale: {name}" => Some(("view", "current-annotation-scale-name")),
        "Current dim style set to '{}'." => Some(("common", "current-dim-style-set-to")),
        "Current layer" => Some(("layers", "current-layer")),
        "Current layer set to \"{layer}\"." => Some(("layers", "current-layer-set-to-layer")),
        "Current linetype set to {nm}." => Some(("styles", "current-linetype-set-to-nm")),
        "Current multileader style: {}" => Some(("styles", "current-multileader-style")),
        "Current multiline style: {}" => Some(("common", "current-multiline-style")),
        "Current object colour: {}" => Some(("styles", "current-object-colour")),
        "Current settings: Edit mode = {}" => Some(("draw", "current-settings-edit-mode")),
        "Current table style: {name}" => Some(("common", "current-table-style-name")),
        "Current text style: {}" => Some(("common", "current-text-style")),
        "Current ucs" => Some(("layers", "current-ucs")),
        "Current values:" => Some(("styles", "current-values")),
        "Current vertex" => Some(("properties", "current-vertex-sentence-case")),
        "Cursor coordinates ($COORDS)\nClick to cycle: static / live / polar" => Some(("ui", "cursor-coordinates-coords-click-to-cycle-stati")),
        "Curvature" => Some(("modify", "curvature")),
        "Curved" => Some(("model", "curved")),
        "Custom" => Some(("common", "custom")),
        "Customization" => Some(("manage", "customization")),
        "Customization\nShow or hide status-bar items" => Some(("ui", "customization-show-or-hide-status-bar-items")),
        "Custom…" => Some(("ui", "custom")),
        "Cut" => Some(("clipboard", "cut")),
        "Cut to Clipboard" => Some(("clipboard", "cut-to-clipboard")),
        "Cutting Line" => Some(("properties", "cutting-line")),
        "Cutting edges" => Some(("modify", "cutting-edges")),
        "Cyan" => Some(("common", "cyan")),
        "Cylinder" => Some(("common", "cylinder")),
        "Cylindrical" => Some(("model", "cylindrical")),
        "DATAEXTRACTION  {rows} rows → \"{fname}\"" => Some(("common", "dataextraction-rows-rows-fname")),
        "DATAEXTRACTION: write failed: {e}" => Some(("common", "dataextraction-write-failed-e")),
        "DATALINK  path to the .csv file:" => Some(("view", "datalink-path-to-the-csv-file")),
        "DATALINK  Specify insertion point:" => Some(("view", "datalink-specify-insertion-point")),
        "DATALINK: cannot read \"{path}\": {e}" => Some(("view", "datalink-cannot-read-path-e")),
        "DATALINK: imported {nrows}×{ncols} cells into a table at the origin." => Some(("view", "datalink-imported-nrows-ncols-cells-into-a-tab")),
        "DATALINK: the CSV file is empty." => Some(("view", "datalink-the-csv-file-is-empty")),
        "DBLIST: drawing has no entities." => Some(("inquiry", "dblist-drawing-has-no-entities")),
        "DBLIST: {count} objects." => Some(("inquiry", "dblist-count-entit")),
        "DDEDIT  Select text entity:" => Some(("annotate", "ddedit-select-text-entity")),
        "DDEDIT: entity type not supported." => Some(("common", "ddedit-entity-type-not-supported")),
        "DDEDIT: selected entity is not text." => Some(("draw", "ddedit-selected-entity-is-not-text")),
        "DDEDIT: text updated." => Some(("common", "ddedit-text-updated")),
        "DIMALIGNED  Enter dimension text (blank = measured value):" => Some(("annotate", "dimaligned-enter-dimension-text-blank-measured")),
        "DIMALIGNED  Enter formatted dimension text (blank = measured value):" => Some(("annotate", "dimaligned-enter-formatted-dimension-text-blank-measured")),
        "DIMALIGNED  Select object to dimension:" => Some(("annotate", "dimaligned-select-object-to-dimension")),
        "DIMALIGNED  Specify dimension line location  [Mtext/Text/Angle]:" => Some(("annotate", "dimaligned-specify-dimension-line-location-tex")),
        "DIMALIGNED  Specify dimension line location  [Text/Angle]:" => Some(("annotate", "dimaligned-specify-dimension-line-location-tex")),
        "DIMALIGNED  Specify first extension line origin or press Enter to select object:" => Some(("annotate", "dimaligned-specify-first-extension-line-origin")),
        "DIMALIGNED  Specify first extension line origin:" => Some(("annotate", "dimaligned-specify-first-extension-line-origin")),
        "DIMALIGNED  Specify second extension line origin:" => Some(("annotate", "dimaligned-specify-second-extension-line-origi")),
        "DIMALIGNED  Specify second extension line origin  [Text/Angle]:" => Some(("annotate", "dimaligned-specify-second-extension-line-origi")),
        "DIMALIGNED  Specify text angle (degrees):" => Some(("annotate", "dimaligned-specify-text-angle-degrees")),
        "DIMANGULAR  Enter dimension text (blank = measured value):" => Some(("annotate", "dimangular-enter-dimension-text-blank-measured")),
        "DIMANGULAR  Enter formatted dimension text (blank = measured value):" => Some(("annotate", "dimangular-enter-formatted-dimension-text-blank-measured")),
        "DIMANGULAR  Select arc, circle, line, or specify an angle vertex:" => Some(("annotate", "dimangular-select-arc-circle-line-or-specify-angle-vertex")),
        "DIMANGULAR  Select second line:" => Some(("annotate", "dimangular-select-second-line")),
        "DIMANGULAR  Specify angle vertex:" => Some(("annotate", "dimangular-specify-angle-vertex")),
        "DIMANGULAR  Specify dimension arc location [Mtext/Text/Angle/Quadrant]:" => Some(("annotate", "dimangular-specify-dimension-arc-location-options")),
        "DIMANGULAR  Specify dimension arc location:" => Some(("annotate", "dimangular-specify-dimension-arc-location")),
        "DIMANGULAR  Specify first extension line point:" => Some(("annotate", "dimangular-specify-first-extension-line-point")),
        "DIMANGULAR  Specify quadrant:" => Some(("annotate", "dimangular-specify-quadrant")),
        "DIMANGULAR  Specify second extension line point:" => Some(("annotate", "dimangular-specify-second-extension-line-point")),
        "DIMANGULAR  Specify second point for text angle:" => Some(("annotate", "dimangular-specify-second-point-for-text-angle")),
        "DIMANGULAR  Specify text angle or first point:" => Some(("annotate", "dimangular-specify-text-angle-or-first-point")),
        "DIMBASELINE  No base dimension found. Place a dimension first." => Some(("annotate", "dimbaseline-no-base-dimension-found-place-a-di")),
        "DIMBASELINE  Specify a second extension line origin (Enter to exit):" => Some(("annotate", "dimbaseline-specify-a-second-extension-line-or")),
        "DIMBREAK  Select dimension to break:" => Some(("annotate", "dimbreak-select-dimension-to-break")),
        "DIMBREAK  Select object to break at, or Enter for Auto:" => Some(("annotate", "dimbreak-select-object-to-break-at-or-enter-fo")),
        "DIMBREAK: not yet implemented — nothing changed." => Some(("common", "dimbreak-not-yet-implemented-nothing-changed")),
        "DIMCENTER  Select arc or circle:" => Some(("draw", "dimcenter-select-arc-or-circle")),
        "DIMCONTINUE  No base dimension found. Place a dimension first." => Some(("annotate", "dimcontinue-no-base-dimension-found-place-a-di")),
        "DIMCONTINUE  Specify a second extension line origin (Enter to exit):" => Some(("annotate", "dimcontinue-specify-a-second-extension-line-or")),
        "DIMDIAMETER  Enter dimension text (blank = measured value):" => Some(("annotate", "dimdiameter-enter-dimension-text-blank-measure")),
        "DIMDIAMETER  Select arc, circle, or polyline arc:" => Some(("annotate", "dimdiameter-select-arc-circle-or-polyline-arc")),
        "DIMDIAMETER  Specify dimension line location  [Mtext/Text/Angle]:" => Some(("annotate", "dimdiameter-specify-dimension-line-location-text")),
        "DIMDIAMETER  Specify point on circle:" => Some(("annotate", "dimdiameter-specify-point-on-circle")),
        "DIMDIAMETER  Specify text angle (degrees):" => Some(("annotate", "dimdiameter-specify-text-angle-degrees")),
        "DIMEDIT  Enter text override (blank = reset to measured):" => Some(("annotate", "dimedit-enter-text-override-blank-reset-to-mea")),
        "DIMEDIT  Select dimension:" => Some(("annotate", "dimedit-select-dimension")),
        "DIMJOGGED: created a jogged radius dimension." => Some(("annotate", "dimjogged-created-a-jogged-radius-dimension")),
        "DIMJOGGED: invalid radius." => Some(("annotate", "dimjogged-invalid-radius")),
        "DIMJOGGED: select an arc or circle first." => Some(("annotate", "dimjogged-select-an-arc-or-circle-first")),
        "DIMJOGGED  Enter dimension text (blank = measured value):" => Some(("annotate", "dimjogged-enter-dimension-text-blank-measured")),
        "DIMJOGGED  Select arc, circle, or polyline arc:" => Some(("annotate", "dimjogged-select-arc-circle-or-polyline-arc")),
        "DIMJOGGED  Specify center location override:" => Some(("annotate", "dimjogged-specify-center-location-override")),
        "DIMJOGGED  Specify dimension line location  [Mtext/Text/Angle]:" => Some(("annotate", "dimjogged-specify-dimension-line-location-text")),
        "DIMJOGGED  Specify jog location:" => Some(("annotate", "dimjogged-specify-jog-location")),
        "DIMJOGGED  Specify text angle (degrees):" => Some(("annotate", "dimjogged-specify-text-angle-degrees")),
        "DIMJOGLINE  Select linear or aligned dimension:" => Some(("annotate", "dimjogline-select-linear-or-aligned-dimension")),
        "DIMJOGLINE  Specify jog location:" => Some(("annotate", "dimjogline-specify-jog-location")),
        "DIMJOGLINE: not yet implemented — nothing changed." => Some(("common", "dimjogline-not-yet-implemented-nothing-changed")),
        "DIMLINEAR  Enter dimension text (blank = measured value):" => Some(("annotate", "dimlinear-enter-dimension-text-blank-measured")),
        "DIMLINEAR  Specify dimension line location  [Text/Angle]:" => Some(("annotate", "dimlinear-specify-dimension-line-location-text")),
        "DIMLINEAR  Specify first extension line origin:" => Some(("annotate", "dimlinear-specify-first-extension-line-origin")),
        "DIMLINEAR  Specify second extension line origin  [Text/Angle]:" => Some(("annotate", "dimlinear-specify-second-extension-line-origin")),
        "DIMLINEAR  Specify text angle (degrees):" => Some(("annotate", "dimlinear-specify-text-angle-degrees")),
        "DIMORDINATE  Enter dimension text (blank = measured value):" => Some(("annotate", "dimordinate-enter-dimension-text-blank-measured")),
        "DIMORDINATE  Specify feature location:" => Some(("annotate", "dimordinate-specify-feature-location")),
        "DIMORDINATE  Specify leader endpoint [Xdatum/Ydatum/Mtext/Text/Angle]:" => Some(("annotate", "dimordinate-specify-leader-endpoint")),
        "DIMORDINATE  Specify text angle (degrees):" => Some(("annotate", "dimordinate-specify-text-angle-degrees")),
        "DIMRADIUS  Enter dimension text (blank = measured value):" => Some(("annotate", "dimradius-enter-dimension-text-blank-measured")),
        "DIMRADIUS  Select arc, circle, or polyline arc:" => Some(("annotate", "dimradius-select-arc-circle-or-polyline-arc")),
        "DIMRADIUS  Specify dimension line location  [Mtext/Text/Angle]:" => Some(("annotate", "dimradius-specify-dimension-line-location-text")),
        "DIMRADIUS  Specify radius point:" => Some(("annotate", "dimradius-specify-radius-point")),
        "DIMRADIUS  Specify text angle (degrees):" => Some(("annotate", "dimradius-specify-text-angle-degrees")),
        "DIMSPACE  Enter value (0 = auto):" => Some(("annotate", "dimspace-enter-value-0-auto")),
        "DIMSPACE  Select base dimension:" => Some(("annotate", "dimspace-select-base-dimension")),
        "DIMSPACE  Select dimension to space (%{count} selected, Enter when done):" => Some(("annotate", "dimspace-select-dimension-to-space-count-selec")),
        "DIMSPACE  Spacing adjusted." => Some(("common", "dimspace-spacing-adjusted")),
        "DIMSTYLE: '{style_name}'.{prop} = {val:.3}" => Some(("layers", "dimstyle-style-name-prop-val-3")),
        "DIMSTYLE: '{}' already exists." => Some(("layers", "dimstyle-already-exists")),
        "DIMSTYLE: '{}' created." => Some(("layers", "dimstyle-created")),
        "DIMSTYLE: '{}' not found." => Some(("layers", "dimstyle-not-found")),
        "DIMSTYLE: unknown property '{}'. Try: dimtxt dimasz dimdli dimexo dimexe dimgap dimscale dimlfac dimdle dimcen dimtsz" => Some(("layers", "dimstyle-unknown-property-try-dimtxt-dimasz-di")),
        "DIMTEDIT  Select dimension:" => Some(("annotate", "dimtedit-select-dimension")),
        "DIMTEDIT  Specify new location for dimension text:" => Some(("annotate", "dimtedit-specify-new-location-for-dimension-te")),
        "DIST  Specify first point:" => Some(("inquiry", "dist-specify-first-point")),
        "DIST  Specify second point:" => Some(("inquiry", "dist-specify-second-point")),
        "DIVIDE  Enter number of segments:" => Some(("inquiry", "divide-enter-number-of-segments")),
        "DIVIDE  Select object to divide:" => Some(("inquiry", "divide-select-object-to-divide")),
        "DIVIDE: entity type not supported or N < 2." => Some(("common", "divide-entity-type-not-supported-or-n-2")),
        "DIVIDE: {count} point(s) placed." => Some(("common", "divide-count-point-s-placed")),
        "DONUT  Specify center of donut (Enter to exit):" => Some(("draw", "donut-specify-center-of-donut-enter-to-exit")),
        "DONUT  Specify inside diameter <0>:" => Some(("draw", "donut-specify-inside-diameter-0")),
        "DONUT  Specify outside diameter:" => Some(("draw", "donut-specify-outside-diameter")),
        "DONUT  Specify second point for inside diameter:" => Some(("draw", "donut-specify-second-point-for-inside-diameter")),
        "DONUT  Specify second point for outside diameter:" => Some(("draw", "donut-specify-second-point-for-outside-diameter")),
        "DRAWORDER  Select reference object (move selection above):" => Some(("view", "draworder-select-reference-object-move-selection-above")),
        "DRAWORDER  Select reference object (move selection under):" => Some(("view", "draworder-select-reference-object-move-selection-under")),
        "DRAWORDER  [Front / Back]  (Above/Under <handle> by typing):" => Some(("view", "draworder-front-back-above-under-handle-by-typ")),
        "DRAWORDER: moved {} entities to {}." => Some(("view", "draworder-moved-entities-to")),
        "DRAWORDER: moved {} entities {} {:x}." => Some(("view", "draworder-moved-entities-x")),
        "DRAWORDER: select entities first." => Some(("common", "draworder-select-entities-first")),
        "DWG Payload" => Some(("properties", "dwg-payload")),
        "DWG Version" => Some(("properties", "dwg-version")),
        "DXF Codes" => Some(("properties", "dxf-codes")),
        "DXF Name" => Some(("properties", "dxf-name")),
        "DXF Subclass" => Some(("properties", "dxf-subclass")),
        "Danger" => Some(("common", "danger")),
        "Dark" => Some(("options", "dark")),
        "Dark Gray" => Some(("properties", "dark-gray")),
        "Data" => Some(("common", "data")),
        "Data Points" => Some(("properties", "data-points")),
        "Data Row:" => Some(("common", "data-row")),
        "Data Size" => Some(("model", "data-size")),
        "Database Curves" => Some(("model", "database-curves")),
        "Decimal" => Some(("common", "decimal")),
        "Decimal degrees" => Some(("styles", "decimal-degrees")),
        "Decimal sep ASCII (DIMDSEP)" => Some(("common", "decimal-sep-ascii-dimdsep")),
        "Decimal separator" => Some(("common", "decimal-separator")),
        "Decimals (DIMALTD)" => Some(("common", "decimals-dimaltd")),
        "Decimals (DIMDEC)" => Some(("common", "decimals-dimdec")),
        "Decoded Data" => Some(("properties", "decoded-data")),
        "Decurve" => Some(("modify", "decurve")),
        "Default" => Some(("common", "default-title-case")),
        "Default Application" => Some(("options", "default-application")),
        "Default save format:" => Some(("file", "default-save-format")),
        "Default text:" => Some(("common", "default-text")),
        "Define\nAttributes" => Some(("insert", "define-attributes")),
        "Defined height" => Some(("properties", "defined-height")),
        "Defined width" => Some(("properties", "defined-width")),
        "Definition" => Some(("properties", "definition")),
        "Definition X" => Some(("properties", "definition-x")),
        "Definition Y" => Some(("properties", "definition-y")),
        "Definition Z" => Some(("properties", "definition-z")),
        "Deg/min/sec" => Some(("common", "deg-min-sec")),
        "Degree" => Some(("properties", "degree")),
        "Delete" => Some(("common", "delete")),
        "Delete Layer" => Some(("layers", "delete-layer")),
        "Delete Objects" => Some(("modal", "delete-objects")),
        "Delete selected entities" => Some(("common", "delete-selected-entities")),
        "Delta X" => Some(("properties", "delta-x")),
        "Delta Y" => Some(("properties", "delta-y")),
        "Delta Z" => Some(("properties", "delta-z")),
        "Description" => Some(("common", "description-title-case")),
        "Description:" => Some(("common", "description-label-title-case")),
        "Deselected." => Some(("inquiry", "deselected")),
        "Design" => Some(("model", "design")),
        "Design\nCenter" => Some(("insert", "design-center")),
        "Details: %{error}" => Some(("modal", "details-error")),
        "Diagonal" => Some(("styles", "diagonal")),
        "Diameter" => Some(("common", "diameter")),
        "Diffuse" => Some(("properties", "diffuse")),
        "Diffuse Map" => Some(("properties", "diffuse-map")),
        "Dim Break" => Some(("annotate", "dim-break")),
        "Dim Edit" => Some(("annotate", "dim-edit")),
        "Dim Space" => Some(("annotate", "dim-space")),
        "Dim Text Edit" => Some(("annotate", "dim-text-edit")),
        "Dim line 1" => Some(("properties", "dim-line-1")),
        "Dim line 2" => Some(("properties", "dim-line-2")),
        "Dim line between ext (DIMTOFL)" => Some(("styles", "dim-line-between-ext-dimtofl")),
        "Dim line color" => Some(("properties", "dim-line-color")),
        "Dim line color ACI (DIMCLRD)" => Some(("styles", "dim-line-color-aci-dimclrd")),
        "Dim line ext" => Some(("properties", "dim-line-ext")),
        "Dim line forced" => Some(("properties", "dim-line-forced")),
        "Dim line inside" => Some(("properties", "dim-line-inside")),
        "Dim line linetype (DIMLTYPE)" => Some(("styles", "dim-line-linetype-dimltype")),
        "Dim line lineweight" => Some(("properties", "dim-line-lineweight")),
        "Dim line weight (DIMLWD)" => Some(("styles", "dim-line-weight-dimlwd")),
        "Dim prefix/suffix" => Some(("properties", "dim-prefix-suffix")),
        "Dim roundoff" => Some(("properties", "dim-roundoff")),
        "Dim scale linear" => Some(("properties", "dim-scale-linear")),
        "Dim scale overall" => Some(("properties", "dim-scale-overall")),
        "Dim style" => Some(("common", "dim-style")),
        "Dim units" => Some(("properties", "dim-units")),
        "DimStyle '{}' updated." => Some(("styles", "dimstyle-updated")),
        "DimStyles: {}" => Some(("layers", "dimstyles")),
        "Dimension" => Some(("common", "dimension")),
        "Dimension Line" => Some(("styles", "dimension-line")),
        "Dimension Style Manager" => Some(("styles", "dimension-style-manager")),
        "Dimension style" => Some(("properties", "dimension-style")),
        "Dimensions" => Some(("common", "dimensions")),
        "Direction" => Some(("properties", "direction")),
        "Direction X" => Some(("properties", "direction-x")),
        "Direction Y" => Some(("properties", "direction-y")),
        "Direction Z" => Some(("properties", "direction-z")),
        "Direction vector X" => Some(("properties", "direction-vector-x")),
        "Direction vector Y" => Some(("properties", "direction-vector-y")),
        "Direction vector Z" => Some(("properties", "direction-vector-z")),
        "Disable" => Some(("plugins", "disable")),
        "Disabled" => Some(("plugins", "disabled")),
        "Discard" => Some(("common", "discard")),
        "Discard Block Edit" => Some(("modify", "discard-block-edit")),
        "Discussions" => Some(("common", "discussions")),
        "Discussions load from GitHub." => Some(("common", "discussions-load-from-github")),
        "Display" => Some(("common", "display")),
        "Display but not plot" => Some(("draw", "display-but-not-plot")),
        "Distance" => Some(("common", "distance")),
        "Distance = %{dist},  Angle in XY Plane = %{angle_xy}°\n  Delta X = %{dx},  Delta Y = %{dy},  Delta Z = %{dz}" => Some(("inquiry", "distance-dist-angle-in-xy-plane-angle-xy-delta")),
        "Distance = %{dist},  Angle in XY Plane = %{angle_xy}°,  Angle from XY Plane = %{angle_z}°\n  Delta X = %{dx},  Delta Y = %{dy},  Delta Z = %{dz}" => Some(("inquiry", "distance-dist-angle-in-xy-plane-angle-xy-angle")),
        "Do you want to save changes to \"%{name}\"?" => Some(("file", "do-you-want-to-save-changes-to-name")),
        "Donate" => Some(("common", "donate")),
        "Done" => Some(("common", "done")),
        "Double" => Some(("common", "double")),
        "Double-click a scale to rename it; edit its paper : drawing ratio here. New / Copy add a scale. Changes are kept only if you click Apply before closing." => Some(("styles", "double-click-a-scale-to-rename-it-edit-its-pap")),
        "Down" => Some(("styles", "down")),
        "Download desktop app" => Some(("plugins", "download-desktop-app")),
        "Draft" => Some(("common", "draft")),
        "Draft Distances" => Some(("model", "draft-distances")),
        "Draw" => Some(("common", "draw")),
        "Draw Order" => Some(("ui", "draw-order")),
        "Draw manually" => Some(("draw", "draw-manually")),
        "Drawing" => Some(("common", "drawing")),
        "Drawing Changed on Disk" => Some(("file", "drawing-changed-on-disk")),
        "Drawing Units" => Some(("common", "drawing-units")),
        "Drawing Units (INSUNITS)\nClick to change" => Some(("file", "drawing-units-insunits-click-to-change")),
        "Drawing View" => Some(("properties", "drawing-view")),
        "Drawing background" => Some(("styles", "drawing-background")),
        "Drawing changed on disk while it was opening; Save will require conflict resolution." => Some(("file", "drawing-changed-on-disk-while-it-was-opening-s")),
        "Drawing limits: {:.4},{:.4} to {:.4},{:.4}." => Some(("view", "drawing-limits-4-4-to-4-4")),
        "Drawing units" => Some(("styles", "drawing-units")),
        "Drawing: {}" => Some(("view", "drawing")),
        "Drop 0 ft, keep 0 in" => Some(("common", "drop-0-ft-keep-0-in")),
        "Dynamic" => Some(("common", "dynamic")),
        "Dynamic Block Entity" => Some(("properties", "dynamic-block-entity")),
        "Dynamic Input" => Some(("ui", "dynamic-input")),
        "Dynamic Input\nF12" => Some(("ui", "dynamic-input-f12")),
        "ELLIPSE  Specify center:" => Some(("draw", "ellipse-specify-center")),
        "ELLIPSE  Specify major axis endpoint:" => Some(("draw", "ellipse-specify-major-axis-endpoint")),
        "ELLIPSE  Specify minor axis point or type half-length  [major r={:.3}]:" => Some(("draw", "ellipse-specify-minor-axis-point-or-type-half")),
        "ELLIPSE (Axis)  Specify first endpoint of major axis:" => Some(("draw", "ellipse-axis-specify-first-endpoint-of-major-a")),
        "ELLIPSE (Axis)  Specify minor axis point or type half-length  [major r={:.3}]:" => Some(("draw", "ellipse-axis-specify-minor-axis-point-or-type")),
        "ELLIPSE (Axis)  Specify second endpoint of major axis:" => Some(("draw", "ellipse-axis-specify-second-endpoint-of-major")),
        "ELLIPSE ARC  Specify center:" => Some(("draw", "ellipse-arc-specify-center")),
        "ELLIPSE ARC  Specify end angle point or type degrees  [start=%{sa}]:" => Some(("draw", "ellipse-arc-specify-end-angle-point-or-type-de")),
        "ELLIPSE ARC  Specify major axis endpoint:" => Some(("draw", "ellipse-arc-specify-major-axis-endpoint")),
        "ELLIPSE ARC  Specify minor axis point or type half-length  [major r=%{r}]:" => Some(("draw", "ellipse-arc-specify-minor-axis-point-or-type-h")),
        "ELLIPSE ARC  Specify start angle point or type degrees:" => Some(("draw", "ellipse-arc-specify-start-angle-point-or-type")),
        "EXPLODE  Select objects to explode:" => Some(("modify", "explode-select-objects-to-explode")),
        "EXPLODE: no explodable objects selected." => Some(("annotate", "explode-no-explodable-objects-selected")),
        "EXTEND  Select boundary edges [{} picked, Enter = done]:" => Some(("modify", "extend-select-boundary-edges-picked-enter-done")),
        "EXTEND  [Enter = done]:" => Some(("modify", "extend-enter-done")),
        "EXTEND{edge}  Click near end of object to extend (Shift+click trims):" => Some(("modify", "extend-edge-click-near-end-of-object-to-extend")),
        "EXTEND{edge}  Crossing: first corner:" => Some(("modify", "extend-edge-crossing-first-corner")),
        "EXTEND{edge}  Crossing: opposite corner:" => Some(("modify", "extend-edge-crossing-opposite-corner")),
        "EXTEND{edge}  Fence: pick points [{} placed, Enter = extend crossed]:" => Some(("modify", "extend-edge-fence-pick-points-placed-enter-ext")),
        "EXTRIM  Click the side to trim away:" => Some(("modify", "extrim-click-the-side-to-trim-away")),
        "EXTRIM  Select cutting boundary:" => Some(("modify", "extrim-select-cutting-boundary")),
        "EXTRUDE  Height:" => Some(("insert", "extrude-height")),
        "EXTRUDE  Select closed profile (Circle, LwPolyline…):" => Some(("insert", "extrude-select-closed-profile-circle-lwpolylin")),
        "EXTRUDE: could not build profile. Select a closed 2D entity (Circle, LwPolyline, etc.)." => Some(("common", "extrude-could-not-build-profile-select-a-close")),
        "EXTRUDE: entity not found." => Some(("common", "extrude-entity-not-found")),
        "EXTRUDE: solid created." => Some(("common", "extrude-solid-created")),
        "Edge" => Some(("common", "edge")),
        "Edge 1" => Some(("properties", "edge-1")),
        "Edge 2" => Some(("properties", "edge-2")),
        "Edge 3" => Some(("properties", "edge-3")),
        "Edge 4" => Some(("properties", "edge-4")),
        "Edge style" => Some(("styles", "edge-style")),
        "Edge: Extend" => Some(("modify", "edge-extend-title-case")),
        "Edges" => Some(("properties", "edges")),
        "Edit" => Some(("layers", "edit")),
        "Edit\nAttribute" => Some(("insert", "edit-attribute")),
        "Edit Aliases" => Some(("manage", "edit-aliases")),
        "Edit Block" => Some(("insert", "edit-block")),
        "Edit Layer State" => Some(("layers", "edit-layer-state")),
        "Edit Text" => Some(("annotate", "edit-text")),
        "Edit lease active; {warning}. External-change checks remain active." => Some(("file", "edit-lease-active-warning-external-change-chec")),
        "Editing: %{selected}" => Some(("common", "editing-selected")),
        "Elements:" => Some(("common", "elements")),
        "Elevation" => Some(("properties", "elevation")),
        "Elevation Gradient" => Some(("properties", "elevation-gradient")),
        "Elevation Max" => Some(("properties", "elevation-max")),
        "Elevation Min" => Some(("properties", "elevation-min")),
        "Ellipse" => Some(("common", "ellipse")),
        "Ellipse Arc" => Some(("draw", "ellipse-arc")),
        "Embedded Curves" => Some(("model", "embedded-curves")),
        "Embedded MText" => Some(("properties", "embedded-mtext")),
        "Enable" => Some(("plugins", "enable")),
        "Enable alternate units (DIMALT)" => Some(("common", "enable-alternate-units-dimalt")),
        "Enable block rotation" => Some(("styles", "enable-block-rotation")),
        "Enable block scale" => Some(("styles", "enable-block-scale")),
        "Enable dogleg" => Some(("styles", "enable-dogleg")),
        "Enable landing" => Some(("styles", "enable-landing")),
        "Enabled" => Some(("properties", "enabled")),
        "End Angle" => Some(("properties", "end-angle")),
        "End Isolation" => Some(("ui", "end-isolation")),
        "End Limit" => Some(("properties", "end-limit")),
        "End Object Isolation" => Some(("ui", "end-object-isolation")),
        "End Tangent X" => Some(("properties", "end-tangent-x")),
        "End Tangent Y" => Some(("properties", "end-tangent-y")),
        "End Tangent Z" => Some(("properties", "end-tangent-z")),
        "End tangent vector X" => Some(("properties", "end-tangent-vector-x")),
        "End tangent vector Y" => Some(("properties", "end-tangent-vector-y")),
        "End tangent vector Z" => Some(("properties", "end-tangent-vector-z")),
        "End X" => Some(("properties", "end-x")),
        "End Y" => Some(("properties", "end-y")),
        "End Z" => Some(("properties", "end-z")),
        "End angle" => Some(("common", "end-angle")),
        "End parameter" => Some(("properties", "end-parameter")),
        "End segment width" => Some(("properties", "end-segment-width")),
        "Endpoint" => Some(("common", "endpoint")),
        "Engineering" => Some(("common", "engineering")),
        "Enter" => Some(("common", "enter")),
        "Enter new value for {name} <{current}>:" => Some(("styles", "enter-new-value-for-name-current")),
        "Entity Transform" => Some(("model", "entity-transform")),
        "Erase" => Some(("modify", "erase")),
        "Exactly" => Some(("properties", "exactly")),
        "Expected coordinates (x,y) or a number, got: \"{text}\"" => Some(("common", "expected-coordinates-x-y-or-a-number-got-text")),
        "Explode" => Some(("modify", "explode")),
        "Export" => Some(("manage", "export")),
        "Export PDF" => Some(("plot", "export-pdf")),
        "Ext Rotation (deg)" => Some(("properties", "ext-rotation-deg")),
        "Ext line 1" => Some(("properties", "ext-line-1")),
        "Ext line 1 linetype (DIMLTEX1)" => Some(("styles", "ext-line-1-linetype-dimltex1")),
        "Ext line 2" => Some(("properties", "ext-line-2")),
        "Ext line 2 linetype (DIMLTEX2)" => Some(("styles", "ext-line-2-linetype-dimltex2")),
        "Ext line color" => Some(("properties", "ext-line-color")),
        "Ext line color ACI (DIMCLRE)" => Some(("draw", "ext-line-color-aci-dimclre")),
        "Ext line ext" => Some(("properties", "ext-line-ext")),
        "Ext line fixed" => Some(("properties", "ext-line-fixed")),
        "Ext line fixed length" => Some(("properties", "ext-line-fixed-length")),
        "Ext line lineweight" => Some(("properties", "ext-line-lineweight")),
        "Ext line offset" => Some(("properties", "ext-line-offset")),
        "Ext line weight (DIMLWE)" => Some(("draw", "ext-line-weight-dimlwe")),
        "Extend" => Some(("modify", "extend")),
        "Extended Data" => Some(("properties", "extended-data")),
        "Extended Entity" => Some(("properties", "extended-entity")),
        "Extended Lighting" => Some(("properties", "extended-lighting")),
        "Extension" => Some(("common", "extension")),
        "Extension (DIMDLE)" => Some(("common", "extension-dimdle")),
        "Extension (DIMEXE)" => Some(("common", "extension-dimexe")),
        "Extension Line" => Some(("styles", "extension-line")),
        "Extents" => Some(("common", "extents")),
        "Extents All" => Some(("annotate", "extents-all")),
        "Extents Max" => Some(("properties", "extents-max")),
        "Extents Min" => Some(("properties", "extents-min")),
        "External Reference" => Some(("properties", "external-reference")),
        "Extra Modeler Data" => Some(("model", "extra-modeler-data")),
        "Extract\nData" => Some(("annotate", "extract-data")),
        "FILEASSOC  register as a .dwg/.dxf handler?  [1 / 0]:" => Some(("styles", "fileassoc-register-as-a-dwg-dxf-handler-1-0")),
        "FILEASSOC = {v}" => Some(("styles", "fileassoc-v")),
        "FILEASSOC set to 0 — unregistered as a file handler" => Some(("styles", "fileassoc-set-to-0-unregistered-as-a-file-hand")),
        "FILEASSOC: registration failed: {e}" => Some(("styles", "fileassoc-registration-failed-e")),
        "FILEASSOC: unregister failed: {e}" => Some(("styles", "fileassoc-unregister-failed-e")),
        "FILLET  Enter fillet radius <{:.4}>:" => Some(("modify", "fillet-enter-fillet-radius-4")),
        "FILLET  Select first object (Line/Arc/LwPolyline)  [R={:.4}]:" => Some(("modify", "fillet-select-first-object-line-arc-lwpolyline")),
        "FILLET  Select second object (Line/Arc/LwPolyline)  [R={:.4}]:" => Some(("modify", "fillet-select-second-object-line-arc-lwpolylin")),
        "FIND/REPLACE: replaced 1 occurrence of \"{search}\"." => Some(("common", "find-replace-replaced-1-occurrence-of-search")),
        "FIND/REPLACE: replaced {replaced} occurrence(s) of \"{search}\"." => Some(("common", "find-replace-replaced-replaced-occurrence-s-of")),
        "FIND/REPLACE: replaced {} occurrence(s) of \"{}\" → \"{}\"." => Some(("inquiry", "find-replace-replaced-occurrence-s-of")),
        "FIND: \"{}\" not found." => Some(("inquiry", "find-not-found")),
        "FIND: specify search text." => Some(("inquiry", "find-specify-search-text")),
        "FIND: {} match(es) for \"{}\"." => Some(("inquiry", "find-match-es-for")),
        "FINDALL  text to find  (add REPLACE <text> by typing):" => Some(("inquiry", "findall-text-to-find-add-replace-text-by-typin")),
        "FINDNONPURGEABLE: named objects in use (not purgeable):" => Some(("styles", "findnonpurgeable-named-objects-in-use-not-purg")),
        "FLATSHOT: created {n} projected edge(s) at Z=0." => Some(("common", "flatshot-created-n-projected-edge-s-at-z-0")),
        "FLATSHOT: select a solid created this session." => Some(("common", "flatshot-select-a-solid-created-this-session")),
        "FLATTEN: no entities." => Some(("inquiry", "flatten-no-entities")),
        "FLATTEN: {} entity(ies) moved to Z=0." => Some(("inquiry", "flatten-entity-ies-moved-to-z-0")),
        "Face" => Some(("properties", "face")),
        "Face count" => Some(("properties", "face-count")),
        "Face style" => Some(("styles", "face-style")),
        "Fade" => Some(("common", "fade")),
        "Failed to create layout: {e}" => Some(("common", "failed-to-create-layout-e")),
        "Falloff Angle" => Some(("properties", "falloff-angle")),
        "Feature X" => Some(("properties", "feature-x")),
        "Feature Y" => Some(("properties", "feature-y")),
        "Feature Z" => Some(("properties", "feature-z")),
        "Feet" => Some(("common", "feet")),
        "Fence" => Some(("common", "fence")),
        "Fetching the default branch from GitHub." => Some(("plugins", "fetching-the-default-branch-from-github")),
        "Field contents" => Some(("properties", "field-contents")),
        "File\nTabs" => Some(("view", "file-tabs")),
        "File locations are unavailable in the web application." => Some(("common", "file-locations-are-unavailable-in-the-web-appl")),
        "File name:" => Some(("modal", "file-name")),
        "Files you open will show up here." => Some(("file", "files-you-open-will-show-up-here")),
        "Fill" => Some(("properties", "fill")),
        "Fill color" => Some(("common", "fill-color-sentence-case")),
        "Fill color ACI (DIMTFILLCLR)" => Some(("common", "fill-color-aci-dimtfillclr")),
        "Fillet" => Some(("common", "fillet")),
        "Finalize command / Repeat last" => Some(("common", "finalize-command-repeat-last")),
        "Finalizing…" => Some(("common", "finalizing")),
        "Find" => Some(("annotate", "find")),
        "Find Next" => Some(("ui", "find-next")),
        "Find Non-\nPurgeable Items" => Some(("manage", "find-non-purgeable-items")),
        "Find and Replace" => Some(("common", "find-and-replace")),
        "Find:" => Some(("ui", "find")),
        "First X" => Some(("properties", "first-x")),
        "First Y" => Some(("properties", "first-y")),
        "First Z" => Some(("properties", "first-z")),
        "First seg. angle:" => Some(("common", "first-seg-angle")),
        "Fit" => Some(("common", "fit")),
        "Fit (DIMATFIT)" => Some(("common", "fit-dimatfit")),
        "Fit (legacy DIMFIT)" => Some(("common", "fit-legacy-dimfit")),
        "Fit Point" => Some(("properties", "fit-point")),
        "Fit Point Count" => Some(("properties", "fit-point-count")),
        "Fit Point X" => Some(("properties", "fit-point-x")),
        "Fit Point Y" => Some(("properties", "fit-point-y")),
        "Fit Point Z" => Some(("properties", "fit-point-z")),
        "Fit Tolerance" => Some(("properties", "fit-tolerance")),
        "Fit point X" => Some(("properties", "fit-point-x-sentence-case")),
        "Fit point Y" => Some(("properties", "fit-point-y-sentence-case")),
        "Fit point Z" => Some(("properties", "fit-point-z-sentence-case")),
        "Fit tolerance" => Some(("properties", "fit-tolerance-sentence-case")),
        "Fit to paper" => Some(("plot", "fit-to-paper")),
        "Fit/Smooth" => Some(("properties", "fit-smooth-title-case")),
        "Fit/smooth" => Some(("properties", "fit-smooth-sentence-case")),
        "Fixed Elevation Range" => Some(("properties", "fixed-elevation-range")),
        "Fixed Height:" => Some(("common", "fixed-height")),
        "Fixed length (DIMFXL)" => Some(("common", "fixed-length-dimfxl")),
        "Fixed-length ext lines (DIMFXLON)" => Some(("common", "fixed-length-ext-lines-dimfxlon")),
        "Flag" => Some(("properties", "flag")),
        "Flags" => Some(("properties", "flags")),
        "Flat Shaded" => Some(("common", "flat-shaded")),
        "Flat Shaded + Edges" => Some(("common", "flat-shaded-edges")),
        "Flow direction:" => Some(("common", "flow-direction")),
        "Font" => Some(("properties", "font")),
        "Font File" => Some(("styles", "font-file-title-case")),
        "Font load failed ({script:?}): {e}" => Some(("common", "font-load-failed-script-e")),
        "Force text inside (DIMTIX)" => Some(("common", "force-text-inside-dimtix")),
        "Format" => Some(("common", "format")),
        "Format (DIMLUNIT)" => Some(("common", "format-dimlunit")),
        "Format:" => Some(("modal", "format")),
        "Fraction format (DIMFRAC)" => Some(("common", "fraction-format-dimfrac")),
        "Fractional" => Some(("common", "fractional")),
        "Frame Text" => Some(("properties", "frame-text")),
        "Frames" => Some(("draw", "frames")),
        "Frames & Print" => Some(("insert", "frames-print")),
        "Frames Off" => Some(("insert", "frames-off")),
        "Frames On" => Some(("insert", "frames-on")),
        "Frames On, Not Plotted" => Some(("draw", "frames-on-not-plotted")),
        "Freeze" => Some(("layers", "freeze")),
        "From DXF" => Some(("properties", "from-dxf")),
        "Front" => Some(("common", "front")),
        "Frozen Layers" => Some(("properties", "frozen-layers")),
        "Full" => Some(("common", "full")),
        "Full file paths are unavailable in the web application." => Some(("common", "full-file-paths-are-unavailable-in-the-web-app")),
        "GRADIENT  Boundary point 1:" => Some(("draw", "gradient-boundary-point-1")),
        "GRADIENT  Point %{n}:" => Some(("draw", "gradient-point-n")),
        "GRADIENT (%{kind}%{invert})  Pick internal point:%{miss}" => Some(("draw", "gradient-kind-invert-pick-internal-point-miss")),
        "GROUP  Enter group name [%{name}]:" => Some(("groups", "group-enter-group-name-name")),
        "General" => Some(("common", "general")),
        "Generate tolerances (DIMTOL)" => Some(("common", "generate-tolerances-dimtol")),
        "Geographic Position Marker" => Some(("properties", "geographic-position-marker")),
        "Geometry" => Some(("common", "geometry")),
        "GitHub URL or owner/repository" => Some(("plugins", "github-url-or-owner-repository")),
        "Global width" => Some(("properties", "global-width")),
        "Gloss" => Some(("properties", "gloss")),
        "Gouraud Shaded" => Some(("common", "gouraud-shaded")),
        "Gouraud Shaded + Edges" => Some(("common", "gouraud-shaded-edges")),
        "Gradians" => Some(("styles", "gradians")),
        "Gradient" => Some(("draw", "gradient")),
        "Gradient type" => Some(("properties", "gradient-type")),
        "Graphics" => Some(("properties", "graphics")),
        "Green" => Some(("common", "green")),
        "Group" => Some(("common", "group")),
        "Group \"{}\" created." => Some(("common", "group-created")),
        "Groups" => Some(("common", "groups")),
        "H Margin:" => Some(("common", "h-margin")),
        "HATCH  Boundary point 1:" => Some(("draw", "hatch-boundary-point-1")),
        "HATCH  Pick internal point:%{miss}" => Some(("draw", "hatch-pick-internal-point-miss")),
        "HATCH  Point %{n}:" => Some(("draw", "hatch-point-n")),
        "HATCHEDIT  Pattern:%{name}  Scale:%{scale}  Angle:%{angle}  [P <pat> / S <scale> / A <angle> | Enter to apply]:" => Some(("draw", "hatchedit-pattern-name-scale-scale-angle-angle")),
        "HATCHEDIT  Select hatch:" => Some(("draw", "hatchedit-select-hatch")),
        "HATCHEDIT: hatch entity not found." => Some(("common", "hatchedit-hatch-entity-not-found")),
        "HATCHEDIT: hatch updated." => Some(("common", "hatchedit-hatch-updated")),
        "HATCHEDIT: not a hatch entity." => Some(("common", "hatchedit-not-a-hatch-entity")),
        "HATCHEDIT: selected entity is not a hatch." => Some(("draw", "hatchedit-selected-entity-is-not-a-hatch")),
        "HELIX  Enter number of turns <3>:" => Some(("draw", "helix-enter-number-of-turns-3")),
        "HELIX  Specify base radius:" => Some(("draw", "helix-specify-base-radius")),
        "HELIX  Specify centre point of base:" => Some(("draw", "helix-specify-centre-point-of-base")),
        "HELIX  Specify helix height:" => Some(("draw", "helix-specify-helix-height")),
        "HELIX  Specify top radius <same as base>:" => Some(("draw", "helix-specify-top-radius-same-as-base")),
        "HIDEOBJECTS: select the objects to hide first." => Some(("layers", "hideobjects-select-the-objects-to-hide-first")),
        "HYPERLINK  URL to attach:" => Some(("view", "hyperlink-url-to-attach")),
        "HYPERLINK: attached to {n} object(s)." => Some(("view", "hyperlink-attached-to-n-object-s")),
        "HYPERLINK: select objects first." => Some(("view", "hyperlink-select-objects-first")),
        "Handle" => Some(("common", "handle")),
        "Has Leader" => Some(("properties", "has-leader")),
        "Hatch" => Some(("common", "hatch")),
        "Header Row:" => Some(("common", "header-row")),
        "Header row suppressed" => Some(("common", "header-row-suppressed")),
        "Height" => Some(("common", "height")),
        "Height (DIMTXT)" => Some(("common", "height-dimtxt")),
        "Helix" => Some(("common", "helix")),
        "Hemispherical" => Some(("model", "hemispherical")),
        "Hid {n} object(s). UNISOLATEOBJECTS to restore." => Some(("layers", "hid-n-object-s-unisolateobjects-to-restore")),
        "Hidden" => Some(("common", "hidden")),
        "Hidden Line" => Some(("common", "hidden-line")),
        "Hide Objects" => Some(("ui", "hide-objects")),
        "Hide details" => Some(("plugins", "hide-details")),
        "High" => Some(("common", "high")),
        "High Threshold" => Some(("properties", "high-threshold")),
        "History" => Some(("model", "history")),
        "Horizontal" => Some(("common", "horizontal")),
        "Horizontal Dir (deg)" => Some(("properties", "horizontal-dir-deg")),
        "Horizontal Landing" => Some(("properties", "horizontal-landing")),
        "Horizontal inside (DIMTIH)" => Some(("common", "horizontal-inside-dimtih")),
        "Horizontal just (DIMJUST)" => Some(("common", "horizontal-just-dimjust")),
        "Horizontal outside (DIMTOH)" => Some(("common", "horizontal-outside-dimtoh")),
        "Hotspot Angle" => Some(("properties", "hotspot-angle")),
        "Hyperlink" => Some(("common", "hyperlink")),
        "ID  Specify point:" => Some(("inquiry", "id-specify-point")),
        "IMAGE  \"{short}\": {pw}×{ph} px" => Some(("common", "image-short-pw-ph-px")),
        "IMAGE  Specify insertion point (%{name}):  " => Some(("draw", "image-specify-insertion-point-name")),
        "IMAGE  Specify width (drag right):" => Some(("draw", "image-specify-width-drag-right")),
        "IMAGE: {e}" => Some(("common", "image-e")),
        "IMPORTOBJ: imported \"{file_stem}\" as mesh." => Some(("common", "importobj-imported-file-stem-as-mesh")),
        "IMPORTOBJ: target drawing was closed." => Some(("common", "importobj-target-drawing-was-closed")),
        "IMPORTOBJ: {error}" => Some(("common", "importobj-error")),
        "INSERT  %{prompt}%{hint}:" => Some(("insert", "insert-prompt-hint")),
        "INSERT  Enter block name:%{hint}" => Some(("insert", "insert-enter-block-name-hint")),
        "INSERT  Filling attributes..." => Some(("insert", "insert-filling-attributes")),
        "INSERT  Specify insertion point for \"%{name}\"  [Scale/Rotate]:" => Some(("insert", "insert-specify-insertion-point-for-name-scale")),
        "INSERT  Specify rotation angle <0>:" => Some(("insert", "insert-specify-rotation-angle-0")),
        "INSERT  Specify scale factor <1>:" => Some(("insert", "insert-specify-scale-factor-1")),
        "INTERFERE: created an interference solid from the overlap." => Some(("common", "interfere-created-an-interference-solid-from-t")),
        "INTERFERE: select exactly two solids created this session." => Some(("common", "interfere-select-exactly-two-solids-created-th")),
        "INTERFERE: the selected solids do not overlap." => Some(("common", "interfere-the-selected-solids-do-not-overlap")),
        "ISAVEBAK  write a .bak on save?  [1 / 0]:" => Some(("styles", "isavebak-write-a-bak-on-save-1-0")),
        "ISAVEBAK = {v}" => Some(("styles", "isavebak-v")),
        "ISAVEBAK set to 0" => Some(("styles", "isavebak-set-to-0")),
        "ISAVEBAK set to 1" => Some(("styles", "isavebak-set-to-1")),
        "ISO pen width" => Some(("properties", "iso-pen-width")),
        "ISOLATEOBJECTS: select the objects to isolate first." => Some(("layers", "isolateobjects-select-the-objects-to-isolate-f")),
        "Iced theme:" => Some(("options", "iced-theme")),
        "Identifier" => Some(("properties", "identifier")),
        "Ignore" => Some(("properties", "ignore")),
        "Illuminance Distance" => Some(("properties", "illuminance-distance")),
        "Image Adjust" => Some(("draw", "image-adjust")),
        "Import" => Some(("common", "import")),
        "In" => Some(("annotate", "in")),
        "Inactive" => Some(("layout", "inactive")),
        "Inches" => Some(("common", "inches")),
        "Incompatible" => Some(("plugins", "incompatible")),
        "Index" => Some(("common", "index")),
        "Indicator Alpha" => Some(("properties", "indicator-alpha")),
        "Indicator Color" => Some(("properties", "indicator-color")),
        "Insert" => Some(("common", "insert")),
        "Insert Block" => Some(("common", "insert-block")),
        "Insert X" => Some(("properties", "insert-x")),
        "Insert Y" => Some(("properties", "insert-y")),
        "Insert Z" => Some(("properties", "insert-z")),
        "Insert view" => Some(("layout", "insert-view")),
        "Insertion" => Some(("common", "insertion")),
        "Install" => Some(("plugins", "install")),
        "Installed" => Some(("common", "installed")),
        "Intensity" => Some(("properties", "intensity")),
        "Intensity Color Scheme" => Some(("properties", "intensity-color-scheme")),
        "Intensity Gradient" => Some(("properties", "intensity-gradient")),
        "Intensity Range" => Some(("properties", "intensity-range")),
        "Intensity Scheme" => Some(("properties", "intensity-scheme")),
        "Interface" => Some(("view", "interface")),
        "Internal" => Some(("properties", "internal")),
        "Intersect" => Some(("model", "intersect")),
        "Intersection" => Some(("common", "intersection")),
        "Invalid" => Some(("command-line", "invalid")),
        "Inverse Linear" => Some(("properties", "inverse-linear")),
        "Inverse Square" => Some(("properties", "inverse-square")),
        "Invert" => Some(("properties", "invert")),
        "Inverted curved" => Some(("model", "inverted-curved")),
        "Inverted cylindrical" => Some(("model", "inverted-cylindrical")),
        "Inverted hemispherical" => Some(("model", "inverted-hemispherical")),
        "Inverted spherical" => Some(("model", "inverted-spherical")),
        "Invert Selection" => Some(("ui", "invert-selection")),
        "Invert Selection: {} object(s) selected." => Some(("common", "invert-selection-object-s-selected")),
        "Invert: off" => Some(("draw", "invert-off")),
        "Invert: on" => Some(("draw", "invert-on")),
        "Invisible" => Some(("common", "invisible")),
        "Island detection style" => Some(("properties", "island-detection-style")),
        "Iso" => Some(("view", "iso")),
        "Isolate Layer" => Some(("layers", "isolate-layer")),
        "Isolate Objects" => Some(("ui", "isolate-objects")),
        "Isolate Objects\nClick for Isolate / Hide / End" => Some(("ui", "isolate-objects-click-for-isolate-hide-end")),
        "Isolated {n} object(s). UNISOLATEOBJECTS to restore." => Some(("layers", "isolated-n-object-s-unisolateobjects-to-restor")),
        "Isolation ended — all objects shown." => Some(("layers", "isolation-ended-all-objects-shown")),
        "Isoline List" => Some(("model", "isoline-list")),
        "Isolines" => Some(("model", "isolines")),
        "Italic" => Some(("properties", "italic")),
        "JIS" => Some(("common", "jis")),
        "JOIN  Select objects to join (%{count} selected, Enter to apply):" => Some(("modify", "join-select-objects-to-join-count-selected-ent")),
        "JOIN: {count_in} object(s) joined into {count_out}." => Some(("common", "join-count-in-object-s-joined-into-count-out")),
        "JUSTIFYTEXT  [Left / Center / Right / Middle / Aligned / Fit]:" => Some(("annotate", "justifytext-left-center-right-middle-aligned-f")),
        "JUSTIFYTEXT: select text objects first." => Some(("annotate", "justifytext-select-text-objects-first")),
        "JUSTIFYTEXT: unknown justification option." => Some(("annotate", "justifytext-unknown-justification-option")),
        "JUSTIFYTEXT: updated {n} text object(s)." => Some(("annotate", "justifytext-updated-n-text-object-s")),
        "Jog Angle" => Some(("properties", "jog-angle")),
        "Jog Line" => Some(("annotate", "jog-line")),
        "Jogged Radius" => Some(("common", "jogged-radius")),
        "Jog X" => Some(("properties", "jog-x")),
        "Jog Y" => Some(("properties", "jog-y")),
        "Jog Z" => Some(("properties", "jog-z")),
        "Jog angle ° (DIMJOGANG)" => Some(("common", "jog-angle-dimjogang")),
        "Join" => Some(("common", "join")),
        "Justification" => Some(("ui", "justification")),
        "Justify" => Some(("properties", "justify")),
        "Keep 0 ft, drop 0 in" => Some(("common", "keep-0-ft-drop-0-in")),
        "Keep recent files" => Some(("common", "keep-recent-files")),
        "Keep with dim line" => Some(("styles", "keep-with-dim-line")),
        "Key" => Some(("command", "key")),
        "Keyboard Shortcuts" => Some(("command", "keyboard-shortcuts")),
        "Kilometers" => Some(("common", "kilometers")),
        "Kind" => Some(("model", "kind")),
        "Knot Parameterization" => Some(("properties", "knot-parameterization")),
        "Knot parameterization" => Some(("properties", "knot-parameterization-sentence-case")),
        "LANDXMLIMPORT  path to the .xml file:" => Some(("view", "landxmlimport-path-to-the-xml-file")),
        "LANDXMLIMPORT: cannot read \"{path}\": {e}" => Some(("view", "landxmlimport-cannot-read-path-e")),
        "LANDXMLIMPORT: imported {} survey point(s). Use ZOOM EXTENTS to view." => Some(("view", "landxmlimport-imported-survey-point-s-use-zoom")),
        "LANDXMLIMPORT: no <CgPoint> survey points found." => Some(("view", "landxmlimport-no-cgpoint-survey-points-found")),
        "LAYDEL  layer to delete:" => Some(("layers", "laydel-layer-to-delete")),
        "LAYDEL: deleted layer \"{layer}\" and {n} object(s)." => Some(("layers", "laydel-deleted-layer-layer-and-n-object-s")),
        "LAYDEL: layer \"0\" cannot be deleted." => Some(("layers", "laydel-layer-0-cannot-be-deleted")),
        "LAYDEL: no layer named \"{name}\"." => Some(("layers", "laydel-no-layer-named-name")),
        "LAYER: '{}' already exists." => Some(("layers", "layer-already-exists")),
        "LAYER: '{}' color set to ACI {}." => Some(("layers", "layer-color-set-to-aci")),
        "LAYER: '{}' created." => Some(("layers", "layer-created")),
        "LAYER: '{}' not found." => Some(("layers", "layer-not-found")),
        "LAYER: current layer set to '{}'." => Some(("layers", "layer-current-layer-set-to")),
        "LAYER: layers frozen." => Some(("layers", "layer-layers-frozen")),
        "LAYER: layers locked." => Some(("layers", "layer-layers-locked")),
        "LAYER: layers thawed." => Some(("layers", "layer-layers-thawed")),
        "LAYER: layers turned off." => Some(("layers", "layer-layers-turned-off")),
        "LAYER: layers turned on." => Some(("layers", "layer-layers-turned-on")),
        "LAYER: layers unlocked." => Some(("layers", "layer-layers-unlocked")),
        "LAYERSTATE: deleted \"{arg}\"." => Some(("layers", "layerstate-deleted-arg")),
        "LAYERSTATE: deleted \"{name}\"." => Some(("common", "layerstate-deleted-name")),
        "LAYERSTATE: no saved state named \"{arg}\"." => Some(("layers", "layerstate-no-saved-state-named-arg")),
        "LAYERSTATE: restored \"{arg}\" ({n} layer(s))." => Some(("layers", "layerstate-restored-arg-n-layer-s")),
        "LAYERSTATE: restored \"{name}\" ({restored} layer(s))." => Some(("common", "layerstate-restored-name-restored-layer-s")),
        "LAYERSTATE: saved \"{arg}\"." => Some(("layers", "layerstate-saved-arg")),
        "LAYERSTATE: saved \"{name}\" in the drawing." => Some(("common", "layerstate-saved-name-in-the-drawing")),
        "LAYERSTATE: updated \"{name}\"." => Some(("common", "layerstate-updated-name")),
        "LAYISO: isolated {} layer(s)." => Some(("layers", "layiso-isolated-layer-s")),
        "LAYISO: select entities on the layers to isolate first." => Some(("layers", "layiso-select-entities-on-the-layers-to-isolat")),
        "LAYMATCH  Select objects to change layer:" => Some(("layers", "laymatch-select-objects-to-change-layer")),
        "LAYMATCH  Select source object to match layer from:" => Some(("layers", "laymatch-select-source-object-to-match-layer-f")),
        "LAYMRG  source layer (merged away):" => Some(("layers", "laymrg-source-layer-merged-away")),
        "LAYMRG  target layer (kept):" => Some(("layers", "laymrg-target-layer-kept")),
        "LAYMRG: layer \"0\" cannot be merged away." => Some(("layers", "laymrg-layer-0-cannot-be-merged-away")),
        "LAYMRG: merged \"{src}\" into \"{dst}\" ({moved} object(s))." => Some(("layers", "laymrg-merged-src-into-dst-moved-object-s")),
        "LAYMRG: source and target are the same layer." => Some(("layers", "laymrg-source-and-target-are-the-same-layer")),
        "LAYMRG: source and target layers must both exist." => Some(("layers", "laymrg-source-and-target-layers-must-both-exis")),
        "LAYOUT: {e}" => Some(("common", "layout-e")),
        "LAYUNISO: all layers restored." => Some(("layers", "layuniso-all-layers-restored")),
        "LAyers" => Some(("styles", "layers")),
        "LEADER  Specify arrowhead point:" => Some(("annotate", "leader-specify-arrowhead-point")),
        "LEADER  Specify next point [%{count} pts — Enter to place text]:" => Some(("annotate", "leader-specify-next-point-count-pts-enter-to-p")),
        "LENGTHEN  Enter option [DE <delta> / TO <total> / P <pct>]:" => Some(("modify", "lengthen-enter-option-de-delta-to-total-p-pct")),
        "LENGTHEN  Select object:" => Some(("modify", "lengthen-select-object")),
        "LENGTHEN: applied." => Some(("common", "lengthen-applied")),
        "LENGTHEN: entity type not supported." => Some(("common", "lengthen-entity-type-not-supported")),
        "LIMITS  Specify first corner or [On / Off] <%{v}>:" => Some(("view", "limits-specify-first-corner-or-on-off-v")),
        "LIMITS  Specify opposite corner <%{v}>:" => Some(("view", "limits-specify-opposite-corner-v")),
        "LIMITS: corners must define a non-zero area." => Some(("view", "limits-corners-must-define-a-non-zero-area")),
        "LIMITS: four finite numeric coordinates required." => Some(("view", "limits-four-finite-numeric-coordinates-require")),
        "LIMITS: four numeric coordinates required." => Some(("view", "limits-four-numeric-coordinates-required")),
        "LINE  Specify first point:" => Some(("draw", "line-specify-first-point")),
        "LINE  Specify next point  [Close/Undo]:" => Some(("draw", "line-specify-next-point-close-undo")),
        "LINE  Specify next point  [Undo]:" => Some(("draw", "line-specify-next-point-undo")),
        "LINETYPE  [List / Set]:" => Some(("styles", "linetype-list-set")),
        "LINETYPE SET  linetype name (ByLayer / ByBlock / …):" => Some(("styles", "linetype-set-linetype-name-bylayer-byblock")),
        "LINETYPE: \"{name}\" is not loaded. Use LINETYPE LIST to see available linetypes." => Some(("styles", "linetype-name-is-not-loaded-use-linetype-list")),
        "LIST: no entities selected. Select entities first." => Some(("inquiry", "list-no-entities-selected-select-entities-firs")),
        "LOFT  Select first cross-section:" => Some(("insert", "loft-select-first-cross-section")),
        "LOFT  Select next cross-section (%{count} selected, Enter to finish):" => Some(("insert", "loft-select-next-cross-section-count-selected")),
        "LOFT: could not loft profiles. Ensure sections have the same edge count and are compatible." => Some(("common", "loft-could-not-loft-profiles-ensure-sections-h")),
        "LOFT: solid created from {} profiles." => Some(("common", "loft-solid-created-from-profiles")),
        "LTSCALE  new global line-type scale:" => Some(("styles", "ltscale-new-global-line-type-scale")),
        "LTSCALE = {v:.4}" => Some(("styles", "ltscale-v-4")),
        "LTSCALE set to {v:.4}" => Some(("styles", "ltscale-set-to-v-4")),
        "LTSCALE: value must be positive." => Some(("styles", "ltscale-value-must-be-positive")),
        "LWDISPLAY  show lineweights?  [ON / OFF]:" => Some(("styles", "lwdisplay-show-lineweights-on-off")),
        "LWDISPLAY = {}" => Some(("styles", "lwdisplay-value-assignment-uppercase")),
        "LWDISPLAY {}" => Some(("styles", "lwdisplay-value-uppercase")),
        "Lamp Preset" => Some(("properties", "lamp-preset")),
        "Land\nXML" => Some(("insert", "land-xml")),
        "Landing Gap" => Some(("properties", "landing-gap")),
        "Landing distance" => Some(("common", "landing-distance-sentence-case")),
        "Landing distance:" => Some(("common", "landing-distance-label-sentence-case")),
        "Landing gap" => Some(("common", "landing-gap-sentence-case")),
        "Landing gap:" => Some(("common", "landing-gap-label-sentence-case")),
        "Landscape" => Some(("common", "landscape")),
        "Language" => Some(("common", "language-title-case")),
        "Language:" => Some(("common", "language-label-title-case")),
        "Last" => Some(("selection", "last")),
        "Later" => Some(("ui", "later")),
        "Latest" => Some(("ui", "latest")),
        "Layer" => Some(("common", "layer")),
        "Layer \"%{name}\"" => Some(("modal", "layer-name")),
        "Layer \"0\" and the current layer can't be deleted — skipped." => Some(("command", "layer-0-and-the-current-layer-can-t-be-deleted")),
        "Layer Freeze" => Some(("layers", "layer-freeze")),
        "Layer Lock" => Some(("layers", "layer-lock")),
        "Layer Manager" => Some(("layers", "layer-manager")),
        "Layer Off" => Some(("layers", "layer-off")),
        "Layer State Manager" => Some(("layers", "layer-state-manager")),
        "Layer State Manager…" => Some(("ui", "layer-state-manager")),
        "Layer Unlock" => Some(("layers", "layer-unlock")),
        "Layer matched to \"{layer}\"." => Some(("common", "layer-matched-to-layer")),
        "Layer state \"{name}\" already exists." => Some(("common", "layer-state-name-already-exists")),
        "Layer state \"{name}\" was not found." => Some(("common", "layer-state-name-was-not-found")),
        "Layer state name" => Some(("layers", "layer-state-name")),
        "Layer state name cannot be empty." => Some(("common", "layer-state-name-cannot-be-empty")),
        "Layer states are stored inside the drawing and remain available after reopening it." => Some(("layers", "layer-states-are-stored-inside-the-drawing-and")),
        "Layer(s) frozen." => Some(("layers", "layer-s-frozen")),
        "Layer(s) locked." => Some(("layers", "layer-s-locked")),
        "Layer(s) turned off." => Some(("layers", "layer-s-turned-off")),
        "Layer(s) unlocked." => Some(("layers", "layer-s-unlocked")),
        "Layers" => Some(("common", "layers")),
        "Layers ({}): {}" => Some(("insert", "layers")),
        "Layers: {}" => Some(("layers", "layers")),
        "Layout" => Some(("common", "layout")),
        "Layout\nTabs" => Some(("view", "layout-tabs")),
        "Layout \"{name}\" silindi" => Some(("common", "layout-name-silindi")),
        "Layout \"{new_name}\" created — use MVIEW to add a viewport" => Some(("common", "layout-new-name-created-use-mview-to-add-a-vie")),
        "Layout \"{orig}\" → \"{new_name}\"" => Some(("common", "layout-orig-new-name")),
        "Layout '{name}' created." => Some(("common", "layout-name-created")),
        "Layout '{name}' deleted." => Some(("common", "layout-name-deleted")),
        "Layout Manager" => Some(("common", "layout-manager")),
        "Layout Print Configuration" => Some(("properties", "layout-print-configuration")),
        "Layout name cannot be empty." => Some(("common", "layout-name-cannot-be-empty")),
        "Layout plots the current sheet using the selected paper size." => Some(("plot", "layout-plots-the-current-sheet-using-the-selec")),
        "Sheet sizes and printable areas reported by the printer." => Some(("plot", "sheet-sizes-and-printable-areas-reported-by-th")),
        "Custom paper size" => Some(("plot", "custom-paper-size")),
        "Printable margins" => Some(("plot", "printable-margins")),
        "Enter a positive width and height." => Some(("plot", "enter-a-positive-width-and-height")),
        "Paper size" => Some(("plot", "paper-size")),
        "{count} driver option(s) set for this printer." => Some(("plot", "count-driver-option-s-set-for-this-printer")),
        "Printer properties — {printer}" => Some(("plot", "printer-properties-printer")),
        "This printer reports no driver options." => Some(("plot", "this-printer-reports-no-driver-options")),
        "Could not read the printer's options: {error}" => Some(("plot", "could-not-read-the-printer-s-options-error")),
        "Reading the printer's options…" => Some(("plot", "reading-the-printer-s-options")),
        "Printing preferences saved for {printer}." => Some(("plot", "printing-preferences-saved-for-printer")),
        "Printing preferences unchanged." => Some(("plot", "printing-preferences-unchanged")),
        "Printer properties" => Some(("plot", "printer-properties")),
        "Layout renamed: '{old_name}' → '{new_name}'" => Some(("common", "layout-renamed-old-name-new-name")),
        "Layouts" => Some(("layout", "layouts")),
        "Leader" => Some(("common", "leader")),
        "Leader 1 X" => Some(("properties", "leader-1-x")),
        "Leader 1 Y" => Some(("properties", "leader-1-y")),
        "Leader 1 Z" => Some(("properties", "leader-1-z")),
        "Leader 2 X" => Some(("properties", "leader-2-x")),
        "Leader 2 Y" => Some(("properties", "leader-2-y")),
        "Leader 2 Z" => Some(("properties", "leader-2-z")),
        "Leader Format" => Some(("common", "leader-format")),
        "Leader Length" => Some(("properties", "leader-length")),
        "Leader Structure" => Some(("common", "leader-structure")),
        "Leader X" => Some(("properties", "leader-x")),
        "Leader Y" => Some(("properties", "leader-y")),
        "Leader Z" => Some(("properties", "leader-z")),
        "Leader arrowhead (DIMLDRBLK)" => Some(("styles", "leader-arrowhead-dimldrblk")),
        "Leader color" => Some(("properties", "leader-color")),
        "Leader draw order:" => Some(("styles", "leader-draw-order")),
        "Leader extension" => Some(("properties", "leader-extension")),
        "Leader linetype" => Some(("properties", "leader-linetype")),
        "Leader lineweight" => Some(("properties", "leader-lineweight")),
        "Leader type" => Some(("properties", "leader-type")),
        "LeaderFirst" => Some(("styles", "leaderfirst")),
        "LeaderHeadFirst" => Some(("styles", "leaderheadfirst")),
        "LeaderTailFirst" => Some(("styles", "leadertailfirst")),
        "Leaders" => Some(("common", "leaders")),
        "Leading" => Some(("styles", "leading")),
        "Leading & trailing" => Some(("common", "leading-trailing")),
        "Left" => Some(("common", "left")),
        "Left Attachment" => Some(("properties", "left-attachment")),
        "Left Offset" => Some(("properties", "left-offset")),
        "Left attachment:" => Some(("common", "left-attachment")),
        "Left to right" => Some(("properties", "left-to-right")),
        "Left-to-right (DIMTXTDIRECTION)" => Some(("common", "left-to-right-dimtxtdirection")),
        "Legacy Entity" => Some(("properties", "legacy-entity")),
        "Length" => Some(("common", "length")),
        "Less" => Some(("properties", "less")),
        "Level of Smoothness" => Some(("properties", "level-of-smoothness")),
        "Light" => Some(("common", "light")),
        "Light Gray" => Some(("properties", "light-gray")),
        "Limits generation (DIMLIM)" => Some(("common", "limits-generation-dimlim")),
        "Line" => Some(("common", "line")),
        "Line Spacing" => Some(("properties", "line-spacing")),
        "Line color (ACI):" => Some(("draw", "line-color-aci")),
        "Line space distance" => Some(("properties", "line-space-distance")),
        "Line space factor" => Some(("properties", "line-space-factor")),
        "Line space style" => Some(("properties", "line-space-style")),
        "Line type:" => Some(("draw", "line-type")),
        "Line weight:" => Some(("draw", "line-weight")),
        "Line with arrow" => Some(("properties", "line-with-arrow")),
        "Line without arrow" => Some(("properties", "line-without-arrow")),
        "LineTypes" => Some(("styles", "linetypes")),
        "Linear" => Some(("common", "linear")),
        "Linear factor (DIMLFAC)" => Some(("draw", "linear-factor-dimlfac")),
        "Lines" => Some(("common", "lines")),
        "Lines & Arrows" => Some(("properties", "lines-arrows")),
        "Linetype" => Some(("common", "linetype-title-case")),
        "Linetype generation" => Some(("properties", "linetype-generation")),
        "Linetype scale" => Some(("common", "linetype-scale")),
        "Linetypes: {}" => Some(("styles", "linetypes-value-title-case")),
        "Lineweight" => Some(("common", "lineweight-title-case")),
        "Lineweight index (0-24, 255=obj):" => Some(("styles", "lineweight-index-0-24-255-obj")),
        "Link\nData" => Some(("annotate", "link-data")),
        "Linked cells" => Some(("properties", "linked-cells")),
        "List" => Some(("common", "list")),
        "Literal spaces: Space stays in the line instead of running the command (same as typing a leading '>'). Stays on until toggled off." => Some(("draw", "literal-spaces-space-stays-in-the-line-instead")),
        "Load CTB/STB" => Some(("styles", "load-ctb-stb")),
        "Load Partial CUI" => Some(("manage", "load-partial-cui")),
        "Load failed" => Some(("plugins", "load-failed")),
        "Load failed:  %{error}" => Some(("plugins", "load-failed-error")),
        "Loaded" => Some(("common", "loaded")),
        "Loading README…" => Some(("plugins", "loading-readme")),
        "Loading discussions…" => Some(("common", "loading-discussions")),
        "Loading plugin catalog…" => Some(("plugins", "loading-plugin-catalog")),
        "Loading references…" => Some(("ui", "loading-references")),
        "Loading videos…" => Some(("common", "loading-videos")),
        "Load…" => Some(("common", "load")),
        "Lock" => Some(("layers", "lock")),
        "Lock position" => Some(("properties", "lock-position")),
        "Locked" => Some(("properties", "locked")),
        "Loft Flags" => Some(("model", "loft-flags")),
        "Loft Transform" => Some(("model", "loft-transform")),
        "Low" => Some(("common", "low")),
        "Low Threshold" => Some(("properties", "low-threshold")),
        "Lower" => Some(("annotate", "lower")),
        "LtScale" => Some(("styles", "ltscale")),
        "Luminance" => Some(("properties", "luminance")),
        "LwPolyline" => Some(("properties", "lwpolyline")),
        "M closed" => Some(("properties", "m-closed")),
        "M density" => Some(("properties", "m-density")),
        "M vertex count" => Some(("properties", "m-vertex-count")),
        "MASSPROP: no entities selected. Select entities first." => Some(("inquiry", "massprop-no-entities-selected-select-entities")),
        "MATCHPROP  Select destination objects (Enter to finish):" => Some(("properties", "matchprop-select-destination-objects-enter-to")),
        "MATCHPROP  Select source object:" => Some(("properties", "matchprop-select-source-object")),
        "MEASURE  Select object to measure:" => Some(("inquiry", "measure-select-object-to-measure")),
        "MEASURE  Specify segment length:" => Some(("inquiry", "measure-specify-segment-length")),
        "MEASURE: entity type not supported or distance too large." => Some(("common", "measure-entity-type-not-supported-or-distance")),
        "MEASURE: {count} point(s) placed." => Some(("common", "measure-count-point-s-placed")),
        "MEASUREGEOM  Enter an option [Distance/Radius/Angle/ARea]:" => Some(("inquiry", "measuregeom-enter-an-option-distance-radius-an")),
        "MEASUREGEOM  Select arc or circle:" => Some(("inquiry", "measuregeom-select-arc-or-circle")),
        "MEASUREGEOM  Specify first corner point (Enter to cancel):" => Some(("inquiry", "measuregeom-specify-first-corner-point-enter-t")),
        "MEASUREGEOM  Specify first point:" => Some(("inquiry", "measuregeom-specify-first-point")),
        "MEASUREGEOM  Specify first ray point:" => Some(("inquiry", "measuregeom-specify-first-ray-point")),
        "MEASUREGEOM  Specify next point (%{n} picked, Enter to calculate):" => Some(("inquiry", "measuregeom-specify-next-point-n-picked-enter")),
        "MEASUREGEOM  Specify second point:" => Some(("inquiry", "measuregeom-specify-second-point")),
        "MEASUREGEOM  Specify second ray point:" => Some(("inquiry", "measuregeom-specify-second-ray-point")),
        "MEASUREGEOM  Specify vertex point:" => Some(("inquiry", "measuregeom-specify-vertex-point")),
        "MINSERT  Enter block name:%{hint}" => Some(("insert", "minsert-enter-block-name-hint")),
        "MINSERT  Enter column spacing <%{val}>:" => Some(("insert", "minsert-enter-column-spacing-val")),
        "MINSERT  Enter number of columns <%{cols}>:" => Some(("insert", "minsert-enter-number-of-columns-cols")),
        "MINSERT  Enter number of rows <%{rows}>:" => Some(("insert", "minsert-enter-number-of-rows-rows")),
        "MINSERT  Enter row spacing <%{val}>:" => Some(("insert", "minsert-enter-row-spacing-val")),
        "MINSERT  Specify insertion point for \"%{name}\":" => Some(("insert", "minsert-specify-insertion-point-for-name")),
        "MIRROR  Erase source objects? [Yes/No] <No>:" => Some(("modify", "mirror-erase-source-objects-yes-no-no")),
        "MIRROR  Specify first mirror-line point  [%{count} objects]:" => Some(("modify", "mirror-specify-first-mirror-line-point-count-o")),
        "MIRROR  Specify second point  [p1=%{px},%{py}]:" => Some(("modify", "mirror-specify-second-point-p1-px-py")),
        "MLEADER  Specify arrowhead point:" => Some(("annotate", "mleader-specify-arrowhead-point")),
        "MLEADER  Specify landing point:" => Some(("annotate", "mleader-specify-landing-point")),
        "MLEADER  Specify next point [%{count} pts — Enter to place text]:" => Some(("annotate", "mleader-specify-next-point-count-pts-enter-to")),
        "MLEADERADD  Select a multileader:" => Some(("annotate", "mleaderadd-select-a-multileader")),
        "MLEADERADD  Specify arrowhead location:" => Some(("annotate", "mleaderadd-specify-arrowhead-location")),
        "MLEADERADD  Specify next leader point (%{count} pts, Enter to finish):" => Some(("annotate", "mleaderadd-specify-next-leader-point-count-pts")),
        "MLEADERALIGN  Leaders aligned." => Some(("common", "mleaderalign-leaders-aligned")),
        "MLEADERALIGN  Select multileaders to align (Enter when done):" => Some(("annotate", "mleaderalign-select-multileaders-to-align-ente")),
        "MLEADERALIGN  Specify direction — pick start point:" => Some(("annotate", "mleaderalign-specify-direction-pick-start-poin")),
        "MLEADERALIGN  Specify end point of alignment direction:" => Some(("annotate", "mleaderalign-specify-end-point-of-alignment-di")),
        "MLEADERCOLLECT  Leaders collected." => Some(("common", "mleadercollect-leaders-collected")),
        "MLEADERCOLLECT  Select multileaders to collect (Enter when done):" => Some(("annotate", "mleadercollect-select-multileaders-to-collect")),
        "MLEADERCOLLECT  Specify collected multileader location:" => Some(("annotate", "mleadercollect-specify-collected-multileader-l")),
        "MLEADERREMOVE  Click near the leader line to remove:" => Some(("annotate", "mleaderremove-click-near-the-leader-line-to-re")),
        "MLEADERREMOVE  Select a multileader:" => Some(("annotate", "mleaderremove-select-a-multileader")),
        "MLEADERSTYLE: '{style_name}'.{prop} = {val:.3}" => Some(("layers", "mleaderstyle-style-name-prop-val-3")),
        "MLEADERSTYLE: '{}' already exists." => Some(("layers", "mleaderstyle-already-exists")),
        "MLEADERSTYLE: '{}' created." => Some(("layers", "mleaderstyle-created")),
        "MLEADERSTYLE: '{}' not found." => Some(("layers", "mleaderstyle-not-found")),
        "MLEADERSTYLE: current style set to '{name}'." => Some(("layers", "mleaderstyle-current-style-set-to-name")),
        "MLEADERSTYLE: unknown property '{}'. Try: text_height arrowhead_size landing_distance landing_gap" => Some(("layers", "mleaderstyle-unknown-property-try-text-height")),
        "Add Vertex" => Some(("modify", "add-vertex")),
        "Closed Cross" => Some(("modify", "closed-cross")),
        "Closed Tee" => Some(("modify", "closed-tee")),
        "Corner Joint" => Some(("modify", "corner-joint")),
        "Cut All" => Some(("modify", "cut-all")),
        "Cut Single" => Some(("modify", "cut-single")),
        "Delete Vertex" => Some(("modify", "delete-vertex")),
        "Loaded multiline styles: {}" => Some(("draw", "loaded-multiline-styles")),
        "Merged Cross" => Some(("modify", "merged-cross")),
        "Merged Tee" => Some(("modify", "merged-tee")),
        "MLEDIT  Choose an edit tool:" => Some(("modify", "mledit-choose-an-edit-tool")),
        "MLEDIT  Select first multiline:" => Some(("modify", "mledit-select-first-multiline")),
        "MLEDIT  Select second multiline:" => Some(("modify", "mledit-select-second-multiline")),
        "MLEDIT  Specify the end of the weld range:" => Some(("modify", "mledit-specify-end-of-weld-range")),
        "MLEDIT  Specify the second cut point:" => Some(("modify", "mledit-specify-second-cut-point")),
        "MLINE  Current settings: Justification = {}, Scale = {}, Style = {}\nSpecify start point or [Justification/Scale/STyle]:" => Some(("draw", "mline-current-settings")),
        "MLINE  Enter justification type [Top/Zero/Bottom] <{}>:" => Some(("draw", "mline-enter-justification")),
        "MLINE  Enter scale factor <{}>:" => Some(("draw", "mline-enter-scale-factor-default")),
        "MLINE  Enter scale factor:" => Some(("draw", "mline-enter-scale-factor")),
        "MLINE  Enter style name or [?] <{}>:" => Some(("draw", "mline-enter-style-name")),
        "MLINE  Specify next point or [Close/Undo]:" => Some(("draw", "mline-specify-next-point-close-undo")),
        "MLINE  Specify next point or [Undo]:" => Some(("draw", "mline-specify-next-point-undo")),
        "MLINE  Specify next point (%{count} pts, Enter to finish, C to close, S to set scale):" => Some(("draw", "mline-specify-next-point-count-pts-enter-to-fi")),
        "MLINE  Specify start point (scale=%{scale}):" => Some(("draw", "mline-specify-start-point-scale-scale")),
        "MLSTYLE: '{}' already exists." => Some(("layers", "mlstyle-already-exists")),
        "MLSTYLE: '{}' created." => Some(("layers", "mlstyle-created")),
        "MLSTYLE: '{}' deleted." => Some(("layers", "mlstyle-deleted")),
        "MLSTYLE: '{}' not found." => Some(("layers", "mlstyle-not-found")),
        "MLSTYLE: current style set to '{}'." => Some(("layers", "mlstyle-current-style-set-to")),
        "MLeader" => Some(("annotate", "mleader")),
        "MLeader styles: (none)  active: {current}" => Some(("layers", "mleader-styles-none-active-current")),
        "MLeader styles: {}  active: {current}" => Some(("layers", "mleader-styles-active-current")),
        "MLine" => Some(("properties", "mline")),
        "MLineStyles:\n  {}" => Some(("layers", "mlinestyles")),
        "MODEL" => Some(("common", "model-uppercase")),
        "MOVE  Specify base point  [%{count} objects]:" => Some(("modify", "move-specify-base-point-count-objects")),
        "MOVE  Specify destination  [base %{bx},%{by}]:" => Some(("modify", "move-specify-destination-base-bx-by")),
        "MS is only available in paper space layouts." => Some(("common", "ms-is-only-available-in-paper-space-layouts")),
        "MSPACE" => Some(("common", "mspace")),
        "MTEXT  Specify insertion point:" => Some(("annotate", "mtext-specify-insertion-point")),
        "MText" => Some(("common", "mtext")),
        "MVIEW  Specify corner of viewport or [Polygonal/Object/Fit/Insert view]:" => Some(("layout", "mview-specify-corner-of-viewport-or-polygonal")),
        "MVIEW  Specify opposite corner:" => Some(("layout", "mview-specify-opposite-corner")),
        "MVIEW Insert view  Choose a named view or [New]:" => Some(("layout", "mview-insert-view-choose-a-named-view-or-new")),
        "MVIEW Insert view  No named views; choose [New]:" => Some(("layout", "mview-insert-view-no-named-views-choose-new")),
        "MVIEW Insert view  Specify placement point:" => Some(("layout", "mview-insert-view-specify-placement-point")),
        "MVIEW New view  Specify first model-space corner:" => Some(("layout", "mview-new-view-specify-first-model-space-corne")),
        "MVIEW New view  Specify opposite model-space corner:" => Some(("layout", "mview-new-view-specify-opposite-model-space-co")),
        "MVIEW Object  Select a circle, full ellipse, or closed polyline:" => Some(("layout", "mview-object-select-a-circle-full-ellipse-or-c")),
        "MVIEW Polygonal  Specify start point:" => Some(("layout", "mview-polygonal-specify-start-point")),
        "MVIEW Polygonal [%{mode}]  Specify next point or [Arc/Line/Close/Undo] (%{count} points):" => Some(("layout", "mview-polygonal-mode-specify-next-point-or-arc")),
        "MVIEW: switch to a paper space layout first." => Some(("view", "mview-switch-to-a-paper-space-layout-first")),
        "MVIEW: the clipping boundary has no usable area." => Some(("common", "mview-the-clipping-boundary-has-no-usable-area")),
        "Magenta" => Some(("common", "magenta")),
        "Major axis vector X" => Some(("properties", "major-axis-vector-x")),
        "Major axis vector Y" => Some(("properties", "major-axis-vector-y")),
        "Major axis vector Z" => Some(("properties", "major-axis-vector-z")),
        "Major radius" => Some(("properties", "major-radius")),
        "Make Current" => Some(("layers", "make-current")),
        "Make Open CAD Studio your default CAD app?" => Some(("modal", "make-open-cad-studio-your-default-cad-app")),
        "Manage" => Some(("common", "manage")),
        "Manage..." => Some(("ui", "manage-menu-period-title-case")),
        "Manage…" => Some(("ui", "manage-picker-title-case")),
        "Manual heights" => Some(("properties", "manual-heights")),
        "Manual positions" => Some(("properties", "manual-positions")),
        "Map Size" => Some(("properties", "map-size")),
        "Markup" => Some(("annotate", "markup")),
        "Mass Properties" => Some(("properties", "mass-properties")),
        "Match" => Some(("properties", "match")),
        "Match Layer" => Some(("layers", "match-layer")),
        "Material" => Some(("properties", "material")),
        "Material Bindings" => Some(("model", "material-bindings")),
        "Material Details" => Some(("properties", "material-details")),
        "Max leader points:" => Some(("styles", "max-leader-points")),
        "Maximum Intensity" => Some(("properties", "maximum-intensity")),
        "Measure" => Some(("properties", "measurement")),
        "Measure Geometry" => Some(("inquiry", "measure-geometry")),
        "Measurement" => Some(("properties", "measurement")),
        "Merge overlapping lines" => Some(("plot", "merge-overlapping-lines")),
        "Merged ranges" => Some(("properties", "merged-ranges")),
        "Mesh" => Some(("properties", "mesh")),
        "Meters" => Some(("common", "meters")),
        "Middle" => Some(("common", "middle")),
        "Middle Center" => Some(("common", "middle-center-title-case")),
        "Middle Left" => Some(("common", "middle-left-title-case")),
        "Middle Right" => Some(("common", "middle-right-title-case")),
        "Middle center" => Some(("common", "middle-center-sentence-case")),
        "Middle left" => Some(("common", "middle-left-sentence-case")),
        "Middle right" => Some(("common", "middle-right-sentence-case")),
        "MiddleCenter" => Some(("styles", "middlecenter")),
        "MiddleLeft" => Some(("common", "middleleft")),
        "MiddleOfBottomLine" => Some(("styles", "middleofbottomline")),
        "MiddleOfText" => Some(("styles", "middleoftext")),
        "MiddleOfTopLine" => Some(("styles", "middleoftopline")),
        "MiddleRight" => Some(("common", "middleright")),
        "Mid Between 2 Points (M2P)" => Some(("common", "mid-between-2-points-m2p")),
        "Midpoint" => Some(("common", "midpoint")),
        "Miles" => Some(("common", "miles")),
        "Millimeters" => Some(("common", "millimeters")),
        "Minimum Intensity" => Some(("properties", "minimum-intensity")),
        "Minor axis vector X" => Some(("properties", "minor-axis-vector-x")),
        "Minor axis vector Y" => Some(("properties", "minor-axis-vector-y")),
        "Minor axis vector Z" => Some(("properties", "minor-axis-vector-z")),
        "Minor radius" => Some(("properties", "minor-radius")),
        "Minus tolerance (DIMTM)" => Some(("styles", "minus-tolerance-dimtm")),
        "Mirror" => Some(("modify", "mirror")),
        "Misc" => Some(("properties", "misc")),
        "Mode" => Some(("properties", "mode")),
        "Model" => Some(("common", "model-title-case")),
        "Model Space" => Some(("layout", "model-space")),
        "Model Viewports" => Some(("view", "model-viewports")),
        "Model and layout list" => Some(("ui", "model-and-layout-list")),
        "Model/Paper Space" => Some(("ui", "model-paper-space")),
        "Modeler Display Data" => Some(("model", "modeler-display-data")),
        "Modeler Format" => Some(("model", "modeler-format")),
        "Modeler Geometry" => Some(("model", "modeler-geometry")),
        "Modify" => Some(("common", "modify")),
        "Mono" => Some(("view", "mono")),
        "Monochrome" => Some(("properties", "monochrome")),
        "More Colors…" => Some(("properties", "more-colors")),
        "More…" => Some(("ui", "more")),
        "Move" => Some(("common", "move")),
        "Move Left" => Some(("layout", "move-left")),
        "Move Right" => Some(("layout", "move-right")),
        "Move freely" => Some(("modify", "move-freely")),
        "Move text & arrows out" => Some(("modify", "move-text-arrows-out")),
        "MTP needs an active point prompt." => Some(("common", "mtp-needs-an-active-point-prompt")),
        "Multi-View\nBlock" => Some(("insert", "multi-view-block")),
        "MultiLeader" => Some(("properties", "multileader")),
        "MultiLine" => Some(("properties", "multiline")),
        "Multileader" => Some(("annotate", "multileader")),
        "Multileader Style Manager" => Some(("styles", "multileader-style-manager")),
        "Multileader draw order:" => Some(("annotate", "multileader-draw-order")),
        "Multileader style" => Some(("properties", "multileader-style")),
        "Multiline style \"%{style}\" was not found." => Some(("draw", "multiline-style-was-not-found")),
        "Multiline\nText" => Some(("annotate", "multiline-text")),
        "Open Cross" => Some(("modify", "open-cross")),
        "Open Tee" => Some(("modify", "open-tee")),
        "Remove Vertex" => Some(("modify", "remove-vertex")),
        "Weld All" => Some(("modify", "weld-all")),
        "Multiline Style Manager" => Some(("styles", "multiline-style-manager")),
        "Multiple" => Some(("common", "multiple")),
        "Multiple lines" => Some(("properties", "multiple-lines")),
        "Multiplier (DIMALTF)" => Some(("common", "multiplier-dimaltf")),
        "N closed" => Some(("properties", "n-closed")),
        "N density" => Some(("properties", "n-density")),
        "N vertex count" => Some(("properties", "n-vertex-count")),
        "NCOPY: copied {n} nested object(s) into model space (blocks kept)." => Some(("insert", "ncopy-copied-n-nested-object-s-into-model-spac")),
        "NCOPY: select a block reference first." => Some(("insert", "ncopy-select-a-block-reference-first")),
        "NURB Version" => Some(("model", "nurb-version")),
        "Name" => Some(("common", "name-title-case")),
        "Name:" => Some(("common", "name-label-title-case")),
        "Named" => Some(("view", "named")),
        "Named View" => Some(("properties", "named-view")),
        "Named plot styles" => Some(("properties", "named-plot-styles")),
        "Named views: {}" => Some(("layers", "named-views")),
        "Navigate" => Some(("view", "navigate")),
        "Nearest" => Some(("common", "nearest")),
        "New" => Some(("common", "new")),
        "New Drawing" => Some(("file", "new-drawing")),
        "New Layout" => Some(("layout", "new-layout")),
        "New Release Available" => Some(("ui", "new-release-available")),
        "New VP" => Some(("layers", "new-vp")),
        "New VP Freeze" => Some(("layers", "new-vp-freeze")),
        "New layer state" => Some(("layers", "new-layer-state")),
        "New name…" => Some(("layout", "new-name")),
        "No" => Some(("common", "no")),
        "No Annotation" => Some(("properties", "no-annotation")),
        "No additional plugins are available." => Some(("plugins", "no-additional-plugins-are-available")),
        "No annotation scale named {arg}." => Some(("view", "no-annotation-scale-named-arg")),
        "No annotation scales defined." => Some(("view", "no-annotation-scales-defined")),
        "No available plugins match your search." => Some(("plugins", "no-available-plugins-match-your-search")),
        "No columns" => Some(("properties", "no-columns")),
        "No dim styles defined." => Some(("layers", "no-dim-styles-defined")),
        "No drawing open — use New or Open first." => Some(("common", "no-drawing-open-use-new-or-open-first")),
        "No drawing open. Use NEW or OPEN to start a drawing." => Some(("command", "no-drawing-open-use-new-or-open-to-start-a-dra")),
        "No entities selected for WBLOCK." => Some(("insert", "no-entities-selected-for-wblock")),
        "No groups found for selected objects." => Some(("common", "no-groups-found-for-selected-objects")),
        "No hidden objects." => Some(("layers", "no-hidden-objects")),
        "No installed plugins match your search." => Some(("plugins", "no-installed-plugins-match-your-search")),
        "No layer states in this drawing" => Some(("layers", "no-layer-states-in-this-drawing")),
        "No library" => Some(("plugins", "no-library")),
        "No linetypes defined." => Some(("styles", "no-linetypes-defined")),
        "No matching layer states" => Some(("layers", "no-matching-layer-states")),
        "No matching patterns" => Some(("properties", "no-matching-patterns")),
        "No multiline styles." => Some(("layers", "no-multiline-styles")),
        "No named views saved." => Some(("layers", "no-named-views-saved")),
        "No objects" => Some(("ui", "no-objects")),
        "No plot style table loaded. Load or create one first." => Some(("file", "no-plot-style-table-loaded-load-or-create-one")),
        "No plugin handled: {command}" => Some(("common", "no-plugin-handled-command")),
        "No plugins installed yet." => Some(("plugins", "no-plugins-installed-yet")),
        "No release notes provided." => Some(("ui", "no-release-notes-provided")),
        "No selection" => Some(("properties", "no-selection")),
        "No table styles." => Some(("layers", "no-table-styles")),
        "No text styles defined." => Some(("layers", "no-text-styles-defined")),
        "No user-defined blocks found in this drawing." => Some(("insert", "no-user-defined-blocks-found-in-this-drawing")),
        "No viewport found in this layout." => Some(("common", "no-viewport-found-in-this-layout")),
        "No viewports. Use MVIEW to create one, or VPORTS 2H / 2V / 4 / SINGLE." => Some(("view", "no-viewports-use-mview-to-create-one-or-vports")),
        "NoOrigin" => Some(("view", "noorigin")),
        "Node" => Some(("common", "node")),
        "None" => Some(("common", "none-title-case")),
        "None of the selected entities could be exported." => Some(("insert", "none-of-the-selected-entities-could-be-exporte")),
        "Normal" => Some(("common", "normal")),
        "Normal Map" => Some(("properties", "normal-map")),
        "Normal X" => Some(("properties", "normal-x")),
        "Normal Y" => Some(("properties", "normal-y")),
        "Normal Z" => Some(("properties", "normal-z")),
        "Not now" => Some(("modal", "not-now")),
        "Not set" => Some(("layers", "not-set")),
        "Not stacked" => Some(("styles", "not-stacked")),
        "Notes" => Some(("properties", "notes")),
        "Nothing found at that point." => Some(("common", "nothing-found-at-that-point")),
        "Nothing to plot: model space contains no printable geometry." => Some(("file", "nothing-to-plot-model-space-contains-no-printa")),
        "Nothing to redo." => Some(("common", "nothing-to-redo")),
        "Nothing to undo." => Some(("common", "nothing-to-undo")),
        "Number" => Some(("properties", "number")),
        "Number of Edges" => Some(("properties", "number-of-edges")),
        "Number of Faces" => Some(("properties", "number-of-faces")),
        "Number of Grips" => Some(("properties", "number-of-grips")),
        "Number of Vertices" => Some(("properties", "number-of-vertices")),
        "Number of turns" => Some(("properties", "number-of-turns")),
        "Number of control points" => Some(("properties", "number-of-control-points")),
        "Number of fit points" => Some(("properties", "number-of-fit-points")),
        "OBJECTSCALE: added the active scale to {n} object(s)." => Some(("view", "objectscale-added-the-active-scale-to-n-object")),
        "OBJECTSCALE: select objects first." => Some(("view", "objectscale-select-objects-first")),
        "OBJECTSCALE: the active annotation scale is unavailable." => Some(("view", "objectscale-the-active-annotation-scale-is-una")),
        "OFFSET  Select object to offset (Enter to finish):" => Some(("modify", "offset-select-object-to-offset-enter-to-finish")),
        "OFFSET  Specify offset distance or [Through] <%{d}>:" => Some(("modify", "offset-specify-offset-distance-or-through-d")),
        "OFFSET%{n}  Click side or [Multiple]  [distance %{d}]:" => Some(("modify", "offset-n-click-side-or-multiple-distance-d")),
        "OFFSET%{n}  Click through point or [Multiple]:" => Some(("modify", "offset-n-click-through-point-or-multiple")),
        "OFFSET%{n} Multiple  Click next side [distance %{d}]:" => Some(("modify", "offset-n-multiple-click-next-side-distance-d")),
        "OFFSET%{n} Multiple  Click next through point:" => Some(("modify", "offset-n-multiple-click-next-through-point")),
        "OK" => Some(("common", "ok")),
        "OLE Frame" => Some(("properties", "ole-frame")),
        "OOPS: nothing to restore." => Some(("file", "oops-nothing-to-restore")),
        "OOPS: restored {n} object(s)." => Some(("file", "oops-restored-n-object-s")),
        "OVERKILL: deleted {n} duplicate object(s)." => Some(("styles", "overkill-deleted-n-duplicate-object-s")),
        "OVERKILL: no duplicate objects found." => Some(("styles", "overkill-no-duplicate-objects-found")),
        "Object" => Some(("common", "object-title-case")),
        "Object References" => Some(("properties", "object-references")),
        "Object Snap" => Some(("ui", "object-snap")),
        "Object Snap Tracking" => Some(("ui", "object-snap-tracking")),
        "Object Snap Tracking\nF11" => Some(("ui", "object-snap-tracking-f11")),
        "Object Snap list\nClick to choose snap types" => Some(("ui", "object-snap-list-click-to-choose-snap-types")),
        "Object Snap: toggle on/off\nF3" => Some(("ui", "object-snap-toggle-on-off-f3")),
        "Object colour set to {}." => Some(("styles", "object-colour-set-to")),
        "Object is on locked layer \"{layer}\" — unlock the layer to edit it." => Some(("common", "object-is-on-locked-layer-layer-unlock-the-layer-to-edit-it")),
        "Object is on locked layer \"{layer}\" — unlock the layer to edit its attributes." => Some(("command", "object-is-on-locked-layer-layer-unlock-the-lay")),
        "Object is on locked layer \"{layer}\" — unlock the layer to select or edit it." => Some(("common", "object-is-on-locked-layer-layer-unlock-the-layer-to-select-or-edit-it")),
        "Object lineweights" => Some(("plot", "object-lineweights")),
        "Object type:" => Some(("ui", "object-type")),
        "Object: %{object_label}" => Some(("styles", "object-object-label")),
        "Oblique (°):" => Some(("common", "oblique")),
        "Oblique Angle" => Some(("common", "oblique-angle")),
        "Obliquing" => Some(("properties", "obliquing")),
        "Off" => Some(("common", "off")),
        "Offset" => Some(("common", "offset")),
        "Offset (DIMEXO)" => Some(("modify", "offset-dimexo")),
        "Offset From Arc" => Some(("properties", "offset-from-arc")),
        "Ole2Frame" => Some(("properties", "ole2frame")),
        "On" => Some(("common", "on")),
        "On / Off" => Some(("layers", "on-off-spaced-separator-title-case")),
        "On/Off" => Some(("layers", "on-off-title-case")),
        "One color" => Some(("properties", "one-color")),
        "Opacity" => Some(("properties", "opacity")),
        "Opacity Map" => Some(("properties", "opacity-map")),
        "Open" => Some(("common", "open")),
        "Open .dwg and .dxf drawings in Open CAD Studio by default. You can change this later in your system settings." => Some(("modal", "open-dwg-and-dxf-drawings-in-open-cad-studio-b")),
        "Open CAD Studio could not trust the certificate presented for the plugin registry. Check your system certificate and proxy settings, then retry." => Some(("plugins", "open-cad-studio-could-not-trust-the-certificat")),
        "Open CAD Studio plugins are native packages and cannot run inside a browser. Download the desktop app to browse, install, and use plugins." => Some(("plugins", "open-cad-studio-plugins-are-native-packages-an")),
        "Open CAD Studio ready." => Some(("file", "open-cad-studio-ready")),
        "Open DWG/DXF: not yet implemented." => Some(("common", "open-dwg-dxf-not-yet-implemented")),
        "Open Discussions on GitHub" => Some(("file", "open-discussions-on-github")),
        "Open File" => Some(("file", "open-file-title-case")),
        "Open File…" => Some(("file", "open-file-picker-title-case")),
        "Open Release Page" => Some(("ui", "open-release-page")),
        "Open and Save" => Some(("file", "open-and-save")),
        "Open cancelled: \"{}\"" => Some(("common", "open-cancelled")),
        "Open failed: {e}" => Some(("common", "open-failed-e")),
        "Open or create a drawing to add a layout." => Some(("common", "open-or-create-a-drawing-to-add-a-layout")),
        "Open or create a drawing to manage layer states." => Some(("common", "open-or-create-a-drawing-to-manage-layer-state")),
        "Open or create a drawing to manage layouts." => Some(("common", "open-or-create-a-drawing-to-manage-layouts")),
        "Open or create a drawing to switch layouts." => Some(("common", "open-or-create-a-drawing-to-switch-layouts")),
        "Open playlist on YouTube" => Some(("file", "open-playlist-on-youtube")),
        "Opened \"{name}\" — {entity_count} entities" => Some(("file", "opened-name-entity-count-entities")),
        "Opened file location: {}" => Some(("common", "opened-file-location")),
        "Opened printer properties." => Some(("file", "opened-printer-properties")),
        "Opened read-only against other editors: {error}" => Some(("file", "opened-read-only-against-other-editors-error")),
        "Opening \"{name}\" ({size_label})…" => Some(("common", "opening-name-size-label")),
        "Opening OCS Discussions for help and questions..." => Some(("view", "opening-ocs-discussions-for-help-and-questions")),
        "Opening OCS Web..." => Some(("view", "opening-ocs-web")),
        "Opening Patreon page..." => Some(("view", "opening-patreon-page")),
        "Opening feedback page..." => Some(("view", "opening-feedback-page")),
        "Opening file" => Some(("ui", "opening-file")),
        "Opening release notes..." => Some(("view", "opening-release-notes")),
        "Operator:" => Some(("ui", "operator")),
        "Optimized" => Some(("styles", "optimized")),
        "Optional description" => Some(("layers", "optional-description")),
        "Options" => Some(("common", "options-title-case")),
        "Ordinate" => Some(("annotate", "ordinate")),
        "Ordinate Type" => Some(("properties", "ordinate-type")),
        "Orientation" => Some(("plot", "orientation")),
        "Origin" => Some(("common", "origin")),
        "Origin X" => Some(("properties", "origin-x")),
        "Origin Y" => Some(("properties", "origin-y")),
        "Origin Z" => Some(("properties", "origin-z")),
        "Ortho" => Some(("common", "ortho")),
        "Ortho Mode" => Some(("ui", "ortho-mode")),
        "Orthogonal Mode\nF8" => Some(("ui", "orthogonal-mode-f8")),
        "Out" => Some(("annotate", "out")),
        "Out Of Range Behavior" => Some(("properties", "out-of-range-behavior")),
        "Outer" => Some(("properties", "outer")),
        "Output" => Some(("common", "output")),
        "Outside" => Some(("common", "outside")),
        "Outside limits." => Some(("common", "outside-limits")),
        "Over first ext" => Some(("styles", "over-first-ext")),
        "Over second ext" => Some(("styles", "over-second-ext")),
        "Overall scale" => Some(("common", "overall-scale")),
        "Overall scale (DIMSCALE)" => Some(("modify", "overall-scale-dimscale")),
        "Overkill" => Some(("manage", "overkill")),
        "Override Center X" => Some(("properties", "override-center-x")),
        "Override Center Y" => Some(("properties", "override-center-y")),
        "Override Center Z" => Some(("properties", "override-center-z")),
        "Override Option" => Some(("properties", "override-option")),
        "Overwrite" => Some(("common", "overwrite")),
        "PAN ended." => Some(("command", "pan-ended")),
        "PAN: drag with the left mouse button. Press Esc to exit." => Some(("view", "pan-drag-with-the-left-mouse-button-press-esc")),
        "PAPER" => Some(("ui", "paper")),
        "PAPER: double-click viewport to enter MSPACE\nMODEL: click to switch to Model Space" => Some(("ui", "paper-double-click-viewport-to-enter-mspace-mo")),
        "PASTEBLOCK: clipboard is empty." => Some(("insert", "pasteblock-clipboard-is-empty")),
        "PASTEBLOCK: {e}" => Some(("insert", "pasteblock-e")),
        "PASTECLIP  Pick insertion point:" => Some(("clipboard", "pasteclip-pick-insertion-point")),
        "PASTEORIG: clipboard is empty." => Some(("insert", "pasteorig-clipboard-is-empty")),
        "PASTEORIG: {} object(s) pasted at original coordinates." => Some(("insert", "pasteorig-object-s-pasted-at-original-coordina")),
        "PDMODE  new value [0=dot 1=none 2=+ 3=x 4=tick; +32 circle +64 square]:" => Some(("styles", "pdmode-new-value-0-dot-1-none-2-3-x-4-tick-32")),
        "PDMODE = {v}" => Some(("styles", "pdmode-v")),
        "PDMODE set to {v}" => Some(("styles", "pdmode-set-to-v")),
        "PDSIZE  new point size (0 = 5% of viewport, >0 = absolute, <0 = viewport percentage):" => Some(("styles", "pdsize-new-point-size-0-5-of-viewport-0-absolu")),
        "PDSIZE = {v:.4}" => Some(("styles", "pdsize-v-4")),
        "PDSIZE set to {v:.4}" => Some(("styles", "pdsize-set-to-v-4")),
        "PEDIT  Enter option:" => Some(("modify", "pedit-enter-option")),
        "PEDIT  Object is not a polyline. Turn it into one?  [Yes/No] <Y>:" => Some(("modify", "pedit-object-is-not-a-polyline-turn-it-into-on")),
        "PEDIT  Select polyline (or a line/arc to convert):" => Some(("modify", "pedit-select-polyline-or-a-line-arc-to-convert")),
        "PEDIT  Specify new width:" => Some(("modify", "pedit-specify-new-width")),
        "PEDIT Join  Select objects to join (%{count} picked), Enter to merge:" => Some(("modify", "pedit-join-select-objects-to-join-count-picked")),
        "PEDIT: applied." => Some(("common", "pedit-applied")),
        "PEDIT: cannot convert this entity." => Some(("common", "pedit-cannot-convert-this-entity")),
        "PEDIT: operation not applicable to this entity." => Some(("common", "pedit-operation-not-applicable-to-this-entity")),
        "PERF" => Some(("common", "perf")),
        "PICKADD = {} ({})" => Some(("styles", "pickadd")),
        "PICKDRAG = {} ({})" => Some(("styles", "pickdrag")),
        "PLAN  [Current ucs / Ucs / World] <Current>:" => Some(("layers", "plan-current-ucs-ucs-world-current")),
        "PLAN UCS  ucs name:" => Some(("layers", "plan-ucs-ucs-name")),
        "PLAN: current UCS plan view." => Some(("layers", "plan-current-ucs-plan-view")),
        "PLAN: plan view of UCS '{}'." => Some(("layers", "plan-plan-view-of-ucs")),
        "PLAN: world plan view." => Some(("layers", "plan-world-plan-view")),
        "PLINE  Specify start point:" => Some(("draw", "pline-specify-start-point")),
        "PLINE [%{mode}]  Next pt  [%{count}pts]:" => Some(("draw", "pline-mode-next-pt-count-pts")),
        "PLOTWINDOW  Specify first corner of plot window:" => Some(("view", "plotwindow-specify-first-corner-of-plot-window")),
        "PLOTWINDOW  Specify opposite corner:" => Some(("view", "plotwindow-specify-opposite-corner")),
        "POINT  Specify point:" => Some(("draw", "point-specify-point")),
        "POLYGON  Enter number of sides <{}>:" => Some(("draw", "polygon-enter-number-of-sides")),
        "POLYGON  Specify center [{} sides]:" => Some(("draw", "polygon-specify-center-sides")),
        "POLYGON  Specify vertex on circle [{} sides inscribed]:" => Some(("draw", "polygon-specify-vertex-on-circle-sides-inscrib")),
        "POLYGON C  Enter number of sides <{}>:" => Some(("draw", "polygon-c-enter-number-of-sides")),
        "POLYGON C  Specify center [{} sides]:" => Some(("draw", "polygon-c-specify-center-sides")),
        "POLYGON C  Specify edge-midpoint radius [{} sides circumscribed]:" => Some(("draw", "polygon-c-specify-edge-midpoint-radius-sides-c")),
        "POLYGON E  Enter number of sides <%{n}>:" => Some(("draw", "polygon-e-enter-number-of-sides-n")),
        "POLYGON E  Specify first endpoint of edge [%{n} sides]:" => Some(("draw", "polygon-e-specify-first-endpoint-of-edge-n-sid")),
        "POLYGON E  Specify second endpoint of edge [%{n} sides]:" => Some(("draw", "polygon-e-specify-second-endpoint-of-edge-n-si")),
        "POLYSOLID  wall height:" => Some(("draw", "polysolid-wall-height")),
        "POLYSOLID  wall width:" => Some(("draw", "polysolid-wall-width")),
        "POLYSOLID: built a wall solid from {used} segment(s) (width {width}, height {height})." => Some(("common", "polysolid-built-a-wall-solid-from-used-segment")),
        "POLYSOLID: select a polyline first." => Some(("common", "polysolid-select-a-polyline-first")),
        "POLYSOLID: the polyline has no usable segments." => Some(("common", "polysolid-the-polyline-has-no-usable-segments")),
        "PSPACE" => Some(("common", "pspace")),
        "PURGE  [All / Blocks / LAyers / LineTypes / STyles]:" => Some(("styles", "purge-all-blocks-layers-linetypes-styles")),
        "PURGE: nothing to purge." => Some(("styles", "purge-nothing-to-purge")),
        "PURGE: unknown option \"{sub}\" — use ALL, Blocks, LAyers, LineTypes or STyles." => Some(("styles", "purge-unknown-option-sub-use-all-blocks-layers")),
        "PURGE: {} item(s) removed — {}." => Some(("styles", "purge-item-s-removed")),
        "PYRAMID  base radius:" => Some(("draw", "pyramid-base-radius")),
        "PYRAMID  height (add sides by typing a 3rd number):" => Some(("draw", "pyramid-height-add-sides-by-typing-a-3rd-numbe")),
        "PYRAMID: could not build all faces." => Some(("common", "pyramid-could-not-build-all-faces")),
        "PYRAMID: created a {n}-sided pyramid (radius {radius}, height {height})." => Some(("common", "pyramid-created-a-n-sided-pyramid-radius-radiu")),
        "PYRAMID: radius and height must be positive." => Some(("common", "pyramid-radius-and-height-must-be-positive")),
        "PYRAMID: tessellation failed." => Some(("common", "pyramid-tessellation-failed")),
        "PYRAMID: tessellation produced no geometry." => Some(("common", "pyramid-tessellation-produced-no-geometry")),
        "Page Setup" => Some(("common", "page-setup")),
        "Page setup applied to the layout." => Some(("file", "page-setup-applied-to-the-layout")),
        "Page setup: {w:.1}×{h:.1} mm  area={plot_area}  center={center}  rot={rotation}°" => Some(("plot", "page-setup-w-1-h-1-mm-area-plot-area-center-ce")),
        "Page setups" => Some(("plot", "page-setups")),
        "Palettes" => Some(("view", "palettes")),
        "Pan" => Some(("view", "pan")),
        "Paper" => Some(("common", "paper")),
        "Paper Space Layout" => Some(("layout", "paper-space-layout")),
        "Paper Text Height:" => Some(("plot", "paper-text-height")),
        "Paper space last" => Some(("plot", "paper-space-last")),
        "Paper units" => Some(("styles", "paper-units")),
        "Parallel" => Some(("common", "parallel")),
        "ParallelToLastLeaderLine" => Some(("styles", "paralleltolastleaderline")),
        "Parsing entities…" => Some(("common", "parsing-entities")),
        "Partial" => Some(("properties", "partial")),
        "Paste" => Some(("common", "paste")),
        "Paste a public repository URL. Compatible releases and the README are detected automatically." => Some(("plugins", "paste-a-public-repository-url-compatible-relea")),
        "Paste as Block" => Some(("clipboard", "paste-as-block")),
        "Paste from Clipboard" => Some(("clipboard", "paste-from-clipboard")),
        "Paste to Original Coordinates" => Some(("clipboard", "paste-to-original-coordinates")),
        "Path Array" => Some(("modify", "path-array")),
        "Path Entity Transform" => Some(("model", "path-entity-transform")),
        "Path Transform" => Some(("model", "path-transform")),
        "Path type:" => Some(("file", "path-type")),
        "Path: %{path}" => Some(("modal", "path-path")),
        "Pattern" => Some(("properties", "pattern")),
        "Pattern name" => Some(("properties", "pattern-name")),
        "Payload" => Some(("properties", "payload")),
        "Perimeter" => Some(("model", "perimeter")),
        "Perpendicular" => Some(("common", "perpendicular")),
        "Persp" => Some(("view", "persp")),
        "Photometric" => Some(("common", "photometric")),
        "Physical Intensity" => Some(("properties", "physical-intensity")),
        "Physical Method" => Some(("properties", "physical-method")),
        "Pick a point" => Some(("common", "pick-a-point")),
        "Pick an object" => Some(("common", "pick-an-object")),
        "Pick…" => Some(("plot", "pick")),
        "Pinned" => Some(("common", "pinned")),
        "Pitch And Family" => Some(("properties", "pitch-and-family")),
        "Place text manually (DIMUPT)" => Some(("common", "place-text-manually-dimupt")),
        "Periodic" => Some(("properties", "periodic")),
        "Planar" => Some(("properties", "planar")),
        "Platform" => Some(("ui", "platform")),
        "Plot" => Some(("common", "plot")),
        "Plot Glyph" => Some(("properties", "plot-glyph")),
        "Plot Style Editor" => Some(("styles", "plot-style-editor")),
        "Plot area" => Some(("plot", "plot-area")),
        "Plot area is empty. Pick a larger window." => Some(("file", "plot-area-is-empty-pick-a-larger-window")),
        "Plot in background" => Some(("plot", "plot-in-background")),
        "Plot offset" => Some(("plot", "plot-offset")),
        "Plot options" => Some(("plot", "plot-options")),
        "Plot scale" => Some(("plot", "plot-scale")),
        "Plot stamp" => Some(("plot", "plot-stamp")),
        "Plot style" => Some(("common", "plot-style")),
        "Plot style is locked to color in Color-Dependent (CTB) mode" => Some(("properties", "plot-style-is-locked-to-color-in-color-dependent")),
        "Plot style '{}' loaded ({} color entries)." => Some(("common", "plot-style-loaded-color-entries")),
        "Plot style ACI {aci} updated." => Some(("file", "plot-style-aci-aci-updated")),
        "Plot style table" => Some(("properties", "plot-style-table")),
        "Plot style table '{}' is not loaded." => Some(("file", "plot-style-table-is-not-loaded")),
        "Plot style table (pen assignments)" => Some(("plot", "plot-style-table-pen-assignments")),
        "Plot style table cleared." => Some(("common", "plot-style-table-cleared")),
        "Plot style table saved to \"{}\"." => Some(("common", "plot-style-table-saved-to")),
        "Plot table attached to" => Some(("properties", "plot-table-attached-to")),
        "Plot table type" => Some(("properties", "plot-table-type")),
        "Plot transparency" => Some(("plot", "plot-transparency")),
        "Plot upside-down" => Some(("plot", "plot-upside-down")),
        "Named plot style tables (.stb) are not supported yet: {name}" => Some(("plot", "named-plot-style-tables-stb-are-not-supported-yet-name")),
        "{name} was not found in the plot styles folder ({folder})." => Some(("plot", "name-was-not-found-in-the-plot-styles-folder-folder")),
        "Plot window: {x0:.2},{y0:.2} to {x1:.2},{y1:.2}" => Some(("common", "plot-window-x0-2-y0-2-to-x1-2-y1-2")),
        "Plot window: {x1:.2},{y1:.2} to {x2:.2},{y2:.2}" => Some(("common", "plot-window-x1-2-y1-2-to-x2-2-y2-2")),
        "Plugin '{id}' failed to load: {e}" => Some(("common", "plugin-id-failed-to-load-e")),
        "Plugin API  %{plugin}  is incompatible with this build's API  %{build}  ribbon ABI. Update or rebuild the plugin." => Some(("plugins", "plugin-api-plugin-is-incompatible-with-this-bu")),
        "Plugin Manager" => Some(("common", "plugin-manager")),
        "Plugin details" => Some(("plugins", "plugin-details")),
        "Plugin registry request timed out" => Some(("plugins", "plugin-registry-request-timed-out")),
        "Plugins" => Some(("plugins", "plugins")),
        "Plugins are available in the desktop app" => Some(("plugins", "plugins-are-available-in-the-desktop-app")),
        "Plus tolerance (DIMTP)" => Some(("styles", "plus-tolerance-dimtp")),
        "Point" => Some(("common", "point")),
        "Point 1 X" => Some(("properties", "point-1-x")),
        "Point 1 Y" => Some(("properties", "point-1-y")),
        "Point 1 Z" => Some(("properties", "point-1-z")),
        "Point 2 X" => Some(("properties", "point-2-x")),
        "Point 2 Y" => Some(("properties", "point-2-y")),
        "Point 2 Z" => Some(("properties", "point-2-z")),
        "Point 3 X" => Some(("properties", "point-3-x")),
        "Point 3 Y" => Some(("properties", "point-3-y")),
        "Point 3 Z" => Some(("properties", "point-3-z")),
        "Point 4 X" => Some(("properties", "point-4-x")),
        "Point 4 Y" => Some(("properties", "point-4-y")),
        "Point 4 Z" => Some(("properties", "point-4-z")),
        "Point Cloud" => Some(("common", "point-cloud")),
        "Point Cloud Display" => Some(("properties", "point-cloud-display")),
        "Point Cloud Ex" => Some(("properties", "point-cloud-ex")),
        "Point Cloud Ex Display" => Some(("properties", "point-cloud-ex-display")),
        "Point Count" => Some(("properties", "point-count")),
        "Point Size:" => Some(("styles", "point-size")),
        "Point Style" => Some(("styles", "point-style")),
        "Point X" => Some(("properties", "point-x")),
        "Point Y" => Some(("properties", "point-y")),
        "Point Z" => Some(("properties", "point-z")),
        "Polar Array" => Some(("modify", "polar-array")),
        "Polar Tracking" => Some(("ui", "polar-tracking")),
        "Polar Tracking (%{angle})\nF10 — left-click on/off\nRight-click cycles · ▾ picks angle" => Some(("ui", "polar-tracking-angle-f10-left-click-on-off-rig")),
        "Polar angle\nClick to choose" => Some(("ui", "polar-angle-click-to-choose")),
        "PolyfaceMesh" => Some(("properties", "polyfacemesh")),
        "Polygon - Circumscribed" => Some(("draw", "polygon-circumscribed")),
        "Polygon - Edge" => Some(("draw", "polygon-edge")),
        "Polygon - Inscribed" => Some(("draw", "polygon-inscribed")),
        "Polygon Mesh" => Some(("properties", "polygonmesh")),
        "Polygonal" => Some(("layout", "polygonal")),
        "Polyline" => Some(("common", "polyline")),
        "Polyline broken at vertex." => Some(("command", "polyline-broken-at-vertex")),
        "Polyline2D" => Some(("properties", "polyline2d")),
        "Polyline3D" => Some(("properties", "polyline3d")),
        "Portrait" => Some(("common", "portrait")),
        "Position" => Some(("common", "position")),
        "Position X" => Some(("common", "position-x")),
        "Position Y" => Some(("common", "position-y")),
        "Position Z" => Some(("common", "position-z")),
        "Precision" => Some(("common", "precision")),
        "Predefined" => Some(("properties", "predefined")),
        "Preset" => Some(("common", "preset")),
        "Preview" => Some(("plot", "preview")),
        "Previous" => Some(("common", "previous")),
        "Primary" => Some(("common", "primary")),
        "Primary Units" => Some(("common", "primary-units")),
        "Print" => Some(("common", "print")),
        "Print failed: {e}" => Some(("common", "print-failed-e")),
        "Printer / plotter" => Some(("plot", "printer-plotter")),
        "Projection" => Some(("view", "projection")),
        "Prompt" => Some(("common", "prompt")),
        "Properties" => Some(("common", "properties")),
        "Properties matched to {} object(s)." => Some(("common", "properties-matched-to-object-s")),
        "Properties restored by this state" => Some(("layers", "properties-restored-by-this-state")),
        "Properties…" => Some(("plot", "properties")),
        "Property Bag" => Some(("properties", "property-bag")),
        "Property:" => Some(("ui", "property")),
        "Proxy Entity" => Some(("properties", "proxy-entity")),
        "Proxy ID" => Some(("properties", "proxy-id")),
        "Purge" => Some(("manage", "purge")),
        "QDIM  Select geometry to dimension (Enter when done):" => Some(("annotate", "qdim-select-geometry-to-dimension-enter-when-d")),
        "QDIM  Specify dimension line position:" => Some(("annotate", "qdim-specify-dimension-line-position")),
        "QDIM  {made} dimensions created." => Some(("annotate", "qdim-made-dimensions-created")),
        "QDIM: endpoints collapse to a single position." => Some(("annotate", "qdim-endpoints-collapse-to-a-single-position")),
        "QDIM: no dimensionable endpoints in the selection." => Some(("annotate", "qdim-no-dimensionable-endpoints-in-the-selecti")),
        "QSELECT: no matching entities." => Some(("inquiry", "qselect-no-matching-entities")),
        "QSELECT: {} entity(ies) selected." => Some(("inquiry", "qselect-entity-ies-selected")),
        "QSELECT: {} object(s) selected." => Some(("common", "qselect-object-s-selected")),
        "QUICKPRINT  %{count} selected — Enter to plot, or keep selecting:" => Some(("view", "quickprint-count-selected-enter-to-plot-or-kee")),
        "QUICKPRINT  Select objects to quick-print:" => Some(("view", "quickprint-select-objects-to-quick-print")),
        "Quadrant" => Some(("common", "quadrant")),
        "Quality" => Some(("common", "quality")),
        "Quick Dim" => Some(("annotate", "quick-dim")),
        "Quick Properties" => Some(("ui", "quick-properties")),
        "Quick Properties\nFloating panel on selection" => Some(("ui", "quick-properties-floating-panel-on-selection")),
        "Quick Select" => Some(("ui", "quick-select-title-case")),
        "Quick Select..." => Some(("ui", "quick-select-menu-period-title-case")),
        "Quick print works in model space." => Some(("file", "quick-print-works-in-model-space")),
        "RAY  Specify start point:" => Some(("draw", "ray-specify-start-point")),
        "RAY  Specify through point:" => Some(("draw", "ray-specify-through-point")),
        "README could not be loaded" => Some(("plugins", "readme-could-not-be-loaded")),
        "RECT  Calculate dimensions based on [Length / Width] <Length>:" => Some(("draw", "rect-calculate-dimensions-based-on-length-width")),
        "RECT  Specify elevation <{}>:" => Some(("draw", "rect-specify-elevation")),
        "RECT  Specify fillet radius <{}>:" => Some(("draw", "rect-specify-fillet-radius")),
        "RECT  Specify first chamfer distance <{}>:" => Some(("draw", "rect-specify-first-chamfer-distance")),
        "RECT  Specify first corner:" => Some(("draw", "rect-specify-first-corner")),
        "RECT  Specify orientation from the first corner:" => Some(("draw", "rect-specify-orientation-from-the-first-corner")),
        "RECT  Specify opposite corner:" => Some(("draw", "rect-specify-opposite-corner")),
        "RECT  Specify rectangle area:" => Some(("draw", "rect-specify-rectangle-area")),
        "RECT  Specify rectangle length:" => Some(("draw", "rect-specify-rectangle-length")),
        "RECT  Specify rectangle width:" => Some(("draw", "rect-specify-rectangle-width")),
        "RECT  Specify rotation angle <{}>:" => Some(("draw", "rect-specify-rotation-angle")),
        "RECT  Specify second chamfer distance <{}>:" => Some(("draw", "rect-specify-second-chamfer-distance")),
        "RECT  Specify thickness <{}>:" => Some(("draw", "rect-specify-thickness")),
        "RECT  Specify width <{}>:" => Some(("draw", "rect-specify-width")),
        "RECT CEN  Specify center point:" => Some(("draw", "rect-cen-specify-center-point")),
        "RECT CEN  Specify corner point:" => Some(("draw", "rect-cen-specify-corner-point")),
        "RECT ROT  Specify adjacent corner (defines edge direction):" => Some(("draw", "rect-rot-specify-adjacent-corner-defines-edge")),
        "RECT ROT  Specify first corner:" => Some(("draw", "rect-rot-specify-first-corner")),
        "RECT ROT  Specify height (perpendicular pick):" => Some(("draw", "rect-rot-specify-height-perpendicular-pick")),
        "REFCLOSE  [Save/Discard] <Save>:" => Some(("modify", "refclose-save-discard-save")),
        "REFCLOSE: Block \"{}\" saved. All references updated." => Some(("inquiry", "refclose-block-saved-all-references-updated")),
        "REFCLOSE: Changes discarded." => Some(("inquiry", "refclose-changes-discarded")),
        "REFCLOSE: no REFEDIT session active." => Some(("inquiry", "refclose-no-refedit-session-active")),
        "REFEDIT  Select block reference to edit:" => Some(("modify", "refedit-select-block-reference-to-edit")),
        "REFEDIT: Editing block \"{}\". Run REFCLOSE to save, REFCLOSE_DISCARD to cancel." => Some(("inquiry", "refedit-editing-block-run-refclose-to-save-ref")),
        "REFEDIT: a session is already active. Use REFCLOSE first." => Some(("inquiry", "refedit-a-session-is-already-active-use-refclo")),
        "REFEDIT: block \"{}\" not found." => Some(("inquiry", "refedit-block-not-found")),
        "REFEDIT: block is empty." => Some(("inquiry", "refedit-block-is-empty")),
        "REFEDIT: selected object is not an INSERT." => Some(("inquiry", "refedit-selected-object-is-not-an-insert")),
        "REGION: created {count} region(s)." => Some(("draw", "region-created-count-region-s")),
        "REGION: select closed polylines or circles." => Some(("draw", "region-select-closed-polylines-or-circles")),
        "RENAME  Select the object type to rename:" => Some(("command", "rename-select-the-object-type-to-rename")),
        "RENAME %{type}  Enter the current name:" => Some(("command", "rename-type-enter-the-current-name")),
        "RENAME %{type}  Rename \"%{old}\" to:" => Some(("command", "rename-type-rename-old-to")),
        "RENAME: '{}' → '{}'." => Some(("styles", "rename")),
        "RENAME: could not rename '{}' in {} — not found or protected, or '{}' is invalid or taken." => Some(("styles", "rename-could-not-rename-in-not-found-or-protec")),
        "RENAME: could not rename block '{}' — missing/anonymous/xref, or '{}' is invalid or taken." => Some(("styles", "rename-could-not-rename-block-missing-anonymou")),
        "RENAME: unknown type '{}'. Use LAYER BLOCK STYLE DIMSTYLE LINETYPE UCS VIEW" => Some(("styles", "rename-unknown-type-use-layer-block-style-dims")),
        "REVCLOUD  Specify next point (%{count} pts, Enter to close):" => Some(("draw", "revcloud-specify-next-point-count-pts-enter-to")),
        "REVCLOUD  Specify start point (arc length = %{arc_length}):" => Some(("draw", "revcloud-specify-start-point-arc-length-arc-le")),
        "REVCLOUD  First corner (%{style}, arc length %{length}): %{message}" => Some(("draw", "revcloud-first-corner")),
        "REVCLOUD  Opposite corner: %{message}" => Some(("draw", "revcloud-opposite-corner")),
        "REVCLOUD  Polygonal start point (%{style}, arc length %{length}): %{message}" => Some(("draw", "revcloud-polygonal-start-point")),
        "REVCLOUD  Next polygonal point (%{count} points, Enter to close): %{message}" => Some(("draw", "revcloud-next-polygonal-point")),
        "REVCLOUD  Freehand first point (%{style}, arc length %{length}): %{message}" => Some(("draw", "revcloud-freehand-first-point")),
        "REVCLOUD  Guide the cursor, then click or press Enter to close: %{message}" => Some(("draw", "revcloud-guide-cursor")),
        "REVCLOUD  Approximate arc chord length <%{length}>:" => Some(("draw", "revcloud-approximate-arc-chord-length")),
        "REVCLOUD  Style [Normal/Calligraphy] <%{style}>:" => Some(("draw", "revcloud-style")),
        "REVCLOUD  Select a closed circle, ellipse, polyline, or spline: %{message}" => Some(("draw", "revcloud-select-closed-curve")),
        "REVCLOUD  Reverse arc direction [Yes/No] <No>:" => Some(("draw", "revcloud-reverse-arc-direction")),
        "REVCLOUD  Select a closed revision-cloud polyline near the replacement start: %{message}" => Some(("draw", "revcloud-select-revision-cloud")),
        "REVCLOUD  Replacement point %{count}; finish on another cloud vertex:" => Some(("draw", "revcloud-replacement-point")),
        "REVCLOUD  Pick the side of the original cloud to erase:" => Some(("draw", "revcloud-pick-side")),
        "REVERSE  Select line, polyline or spline to reverse:" => Some(("modify", "reverse-select-line-polyline-or-spline-to-reve")),
        "REVOLVE  Angle of revolution <360>:" => Some(("insert", "revolve-angle-of-revolution-360")),
        "REVOLVE  Axis end point:" => Some(("insert", "revolve-axis-end-point")),
        "REVOLVE  Axis start point:" => Some(("insert", "revolve-axis-start-point")),
        "REVOLVE  Creation mode [Solid/Surface]" => Some(("insert", "revolve-creation-mode-solid-surface")),
        "REVOLVE  Enter angle expression:" => Some(("insert", "revolve-enter-angle-expression")),
        "REVOLVE  Select line, ray, or construction line for axis:" => Some(("insert", "revolve-select-line-ray-or-construction-line-for-axis")),
        "REVOLVE  Select objects to revolve or [Mode] (Enter to finish):" => Some(("insert", "revolve-select-objects-or-mode")),
        "REVOLVE  Select profile:" => Some(("insert", "revolve-select-profile")),
        "REVOLVE  Specify angle of revolution or [Start angle/Reverse/Expression]" => Some(("insert", "revolve-specify-angle-or-options")),
        "REVOLVE  Specify axis start point or [Object/X/Y/Z/Mode]:" => Some(("insert", "revolve-specify-axis-start-or-options")),
        "REVOLVE  Specify start angle" => Some(("insert", "revolve-specify-start-angle")),
        "REVOLVE: created %{created} object(s); %{failed} source(s) could not be revolved." => Some(("common", "revolve-created-objects-failed-sources")),
        "REVOLVE: could not revolve profile." => Some(("common", "revolve-could-not-revolve-profile")),
        "REVOLVE: entity not found." => Some(("common", "revolve-entity-not-found")),
        "REVOLVE: no selected object could be revolved with the requested options." => Some(("common", "revolve-no-selected-object-could-be-revolved")),
        "REVOLVE: solid created ({:.0}°)." => Some(("common", "revolve-solid-created-0")),
        "ROTATE  Specify first reference point or type reference angle:" => Some(("modify", "rotate-specify-first-reference-point-or-type-r")),
        "ROTATE  Specify new absolute angle  [ref=%{a}]:" => Some(("modify", "rotate-specify-new-absolute-angle-ref-a")),
        "ROTATE  Specify rotation angle  <%{a}>:" => Some(("modify", "rotate-specify-rotation-angle-a")),
        "ROTATE  Specify rotation center  [%{count} objects]:" => Some(("modify", "rotate-specify-rotation-center-count-objects")),
        "ROTATE  Specify second reference point:" => Some(("modify", "rotate-specify-second-reference-point")),
        "Radians" => Some(("common", "radians")),
        "Radius" => Some(("common", "radius")),
        "Radius = %{radius},  Diameter = %{diameter}" => Some(("inquiry", "radius-radius-diameter-diameter")),
        "Radius ratio" => Some(("properties", "radius-ratio")),
        "Raster Image" => Some(("properties", "raster-image")),
        "RasterImage" => Some(("properties", "rasterimage")),
        "Ray" => Some(("common", "ray")),
        "Reactor" => Some(("properties", "reactor")),
        "Read-only session (--read-only): saving is disabled." => Some(("common", "read-only-session-read-only-saving-is-disabled")),
        "Reading file…" => Some(("ui", "reading-file")),
        "Realistic" => Some(("common", "realistic")),
        "Recent Documents" => Some(("common", "recent-documents")),
        "Recent Files" => Some(("common", "recent-files")),
        "Recent file no longer exists: {}" => Some(("common", "recent-file-no-longer-exists")),
        "Records" => Some(("properties", "records")),
        "Rectangle - Center" => Some(("draw", "rectangle-center")),
        "Rectangle - Rotated" => Some(("draw", "rectangle-rotated")),
        "Rectangle - Two Corners" => Some(("draw", "rectangle-two-corners")),
        "Rectangular Array" => Some(("modify", "rectangular-array")),
        "Red" => Some(("common", "red")),
        "Redo" => Some(("ui", "redo")),
        "Redo: {last_label}" => Some(("common", "redo-last-label")),
        "Reference" => Some(("common", "reference")),
        "Reference Point" => Some(("common", "reference-point")),
        "Reflection Map" => Some(("properties", "reflection-map")),
        "Reflectivity" => Some(("properties", "reflectivity")),
        "Refraction" => Some(("properties", "refraction")),
        "Refraction Map" => Some(("properties", "refraction-map")),
        "Region" => Some(("properties", "region")),
        "Registered Class Entity" => Some(("properties", "registered-class-entity")),
        "Release" => Some(("ui", "release")),
        "Reload failed: {error}" => Some(("file", "reload-failed-error")),
        "Reload from Disk" => Some(("modal", "reload-from-disk")),
        "Remote Text" => Some(("properties", "remote-text")),
        "Remove Leader" => Some(("common", "remove-leader")),
        "Removed annotation scale {arg}." => Some(("view", "removed-annotation-scale-arg")),
        "Rename" => Some(("common", "rename")),
        "Renamed '{old}' → '{new}'." => Some(("common", "renamed-old-new")),
        "Render Flags" => Some(("properties", "render-flags")),
        "Repeat %{last}" => Some(("ui", "repeat-last")),
        "Repeat bottom labels" => Some(("properties", "repeat-bottom-labels")),
        "Repeat top labels" => Some(("properties", "repeat-top-labels")),
        "Replace" => Some(("common", "replace")),
        "Replace All" => Some(("ui", "replace-all")),
        "Replace with:" => Some(("ui", "replace-with")),
        "Replacement text" => Some(("common", "replacement-text")),
        "Report" => Some(("common", "report")),
        "Requires 0 OR 1 OR MULTIPLE OR SINGLE" => Some(("styles", "requires-0-or-1-or-multiple-or-single")),
        "Requires 0 OR 1 OR MULTIPLE OR SINGLE." => Some(("annotate", "requires-0-or-1-or-multiple-or-single")),
        "Requires 0 OR 1 OR MULTIPLE OR SINGLE. " => Some(("common", "requires-0-or-1-or-multiple-or-single")),
        "Requires 0 or 1" => Some(("styles", "requires-0-or-1")),
        "Requires Single or Multiple." => Some(("annotate", "requires-single-or-multiple")),
        "Requires Single or Multiple. " => Some(("common", "requires-single-or-multiple")),
        "Requires a non-negative number of minutes (0 = off)" => Some(("styles", "requires-a-non-negative-number-of-minutes-0-of")),
        "Restart to load" => Some(("plugins", "restart-to-load")),
        "Restore" => Some(("common", "restore")),
        "Restored properties" => Some(("layers", "restored-properties")),
        "Retry" => Some(("common", "retry")),
        "Rev Cloud" => Some(("draw", "rev-cloud")),
        "Calligraphy" => Some(("draw", "calligraphy")),
        "First point" => Some(("draw", "first-point")),
        "Freehand" => Some(("draw", "freehand")),
        "Rectangular" => Some(("draw", "rectangular")),
        "The selected path cannot form a revision cloud." => Some(("draw", "revcloud-path-cannot-form")),
        "Select a closed revision-cloud polyline." => Some(("draw", "revcloud-select-closed-revision-cloud")),
        "The selected polyline is not planar." => Some(("draw", "revcloud-polyline-not-planar")),
        "The two corners must define a non-zero area." => Some(("draw", "revcloud-corners-non-zero-area")),
        "Arc length must be greater than zero." => Some(("draw", "revcloud-arc-length-positive")),
        "Enter a valid arc length." => Some(("draw", "revcloud-enter-valid-arc-length")),
        "Select a supported closed curve." => Some(("draw", "revcloud-select-supported-closed-curve")),
        "Select a closed circle, ellipse, polyline, or spline." => Some(("draw", "revcloud-select-closed-entity")),
        "Reverse" => Some(("common", "reverse")),
        "Revision" => Some(("model", "revision")),
        "Revolve Entity" => Some(("model", "revolve-entity")),
        "Revolve Flags" => Some(("model", "revolve-flags")),
        "Right" => Some(("common", "right")),
        "Right Attachment" => Some(("properties", "right-attachment")),
        "Right Offset" => Some(("properties", "right-offset")),
        "Right attachment:" => Some(("common", "right-attachment")),
        "Rotate" => Some(("common", "rotate")),
        "Rotation" => Some(("common", "rotation")),
        "Round off (DIMALTRND)" => Some(("common", "round-off-dimaltrnd")),
        "Round off (DIMRND)" => Some(("common", "round-off-dimrnd")),
        "Rows" => Some(("properties", "rows")),
        "SAVEALL: save each tab individually in the web build." => Some(("file", "saveall-save-each-tab-individually-in-the-web")),
        "SAVEALL: saved {saved} drawing(s){}." => Some(("file", "saveall-saved-saved-drawing-s")),
        "SAVEALL: {} already has a save running" => Some(("file", "saveall-already-has-a-save-running")),
        "SAVEALL: {} failed: {e}" => Some(("file", "saveall-failed-e")),
        "SAVETIME  autosave interval in minutes (0 = off):" => Some(("styles", "savetime-autosave-interval-in-minutes-0-off")),
        "SAVETIME = {}" => Some(("styles", "savetime")),
        "SCALE  Specify base point  [%{count} objects]:" => Some(("modify", "scale-specify-base-point-count-objects")),
        "SCALE  Specify first reference point or type reference length:" => Some(("modify", "scale-specify-first-reference-point-or-type-re")),
        "SCALE  Specify new length from base or type a length  [ref=%{d}]:" => Some(("modify", "scale-specify-new-length-from-base-or-type-a-l")),
        "SCALE  Specify scale factor  <%{f}>:" => Some(("modify", "scale-specify-scale-factor-f")),
        "SCALE  Specify second reference point:" => Some(("modify", "scale-specify-second-reference-point")),
        "SCALELISTEDIT  [Add / Delete]:" => Some(("view", "scalelistedit-add-delete")),
        "SCALELISTEDIT ADD  new scale ratio (e.g. 1:50):" => Some(("view", "scalelistedit-add-new-scale-ratio-e-g-1-50")),
        "SCALELISTEDIT ADD: use a ratio like 1:50." => Some(("view", "scalelistedit-add-use-a-ratio-like-1-50")),
        "SCALELISTEDIT DELETE  scale ratio to remove:" => Some(("view", "scalelistedit-delete-scale-ratio-to-remove")),
        "SCALETEXT  scale factor (or 'H <height>' for an absolute height):" => Some(("styles", "scaletext-scale-factor-or-h-height-for-an-abso")),
        "SCALETEXT: no Text/MText in selection." => Some(("styles", "scaletext-no-text-mtext-in-selection")),
        "SCALETEXT: scaled {count} text entity(ies)." => Some(("styles", "scaletext-scaled-count-text-entity-ies")),
        "SCALETEXT: select Text/MText entities first." => Some(("styles", "scaletext-select-text-mtext-entities-first")),
        "SCALETEXT: value must be positive." => Some(("styles", "scaletext-value-must-be-positive")),
        "SCRIPT  path to the .scr file:" => Some(("file", "script-path-to-the-scr-file")),
        "SCRIPT: cannot read {p}: {e}" => Some(("file", "script-cannot-read-p-e")),
        "SCRIPT: running {} command(s) from {p}." => Some(("file", "script-running-command-s-from-p")),
        "SECTION  cutting-plane axis  [X / Y / Z]:" => Some(("draw", "section-cutting-plane-axis-x-y-z")),
        "SECTION  offset along X:" => Some(("draw", "section-offset-along-x")),
        "SECTION  offset along Y:" => Some(("draw", "section-offset-along-y")),
        "SECTION  offset along Z:" => Some(("draw", "section-offset-along-z")),
        "SECTION: could not build the cutting plane." => Some(("common", "section-could-not-build-the-cutting-plane")),
        "SECTION: could not determine the solid's extent." => Some(("common", "section-could-not-determine-the-solid-s-extent")),
        "SECTION: created {} section line(s) at {}={value}." => Some(("common", "section-created-section-line-s-at-value")),
        "SECTION: select exactly one solid created this session." => Some(("common", "section-select-exactly-one-solid-created-this")),
        "SECTION: solid modelling is unavailable in this build." => Some(("common", "section-solid-modelling-is-unavailable-in-this")),
        "SECTION: the plane does not cross the solid." => Some(("common", "section-the-plane-does-not-cross-the-solid")),
        "SELECTALL: {} object(s) selected." => Some(("inquiry", "selectall-object-s-selected")),
        "SELHANDLES: no entities selected. Select entities first." => Some(("inquiry", "selhandles-no-entities-selected-select-entitie")),
        "SETBYLAYER: reset {changed} entity/entities to ByLayer." => Some(("styles", "setbylayer-reset-changed-entity-entities-to-by")),
        "SETBYLAYER: select entities first." => Some(("styles", "setbylayer-select-entities-first")),
        "SETVAR  new value (blank to read):" => Some(("styles", "setvar-new-value-blank-to-read")),
        "SETVAR  variable name:" => Some(("styles", "setvar-variable-name")),
        "SETVAR: {name} requires 0, 1, or 2." => Some(("draw", "setvar-frame-range")),
        "SHEETSET: Sheet Set Manager not yet implemented." => Some(("view", "sheetset-sheet-set-manager-not-yet-implemented")),
        "SHX" => Some(("properties", "shx")),
        "Connect" => Some(("draw", "sketch-connect")),
        "Exit" => Some(("draw", "sketch-exit")),
        "Increment" => Some(("draw", "sketch-increment")),
        "Pen" => Some(("draw", "sketch-pen")),
        "Quit" => Some(("draw", "sketch-quit")),
        "Record" => Some(("draw", "sketch-record")),
        "Stop erasing" => Some(("draw", "sketch-stop-erasing")),
        "SKETCH  Object type [Line/Polyline/Spline]:" => Some(("draw", "sketch-object-type")),
        "SKETCH  Record increment <%{value}>:" => Some(("draw", "sketch-record-increment")),
        "SKETCH  Spline fit tolerance <%{value}>:" => Some(("draw", "sketch-spline-fit-tolerance")),
        "SKETCH  Erase — move backward over the temporary sketch:" => Some(("draw", "sketch-erase-move-backward")),
        "SKETCH (%{type}, increment %{increment})  Pen down — move to sketch:" => Some(("draw", "sketch-pen-down-move")),
        "SKETCH (%{type}, increment %{increment})  Pen up — click to lower the pen:" => Some(("draw", "sketch-pen-up-click")),
        "SKETCH  Pen down — move to sketch, click to lift, Enter to record:" => Some(("draw", "sketch-pen-down-move-to-sketch-click-to-lift-e")),
        "SKETCH  Pen up — click to lower the pen, Enter to record:" => Some(("draw", "sketch-pen-up-click-to-lower-the-pen-enter-to")),
        "SLICE  cutting-plane axis  [X / Y / Z]  (add TOP/BOTTOM by typing):" => Some(("draw", "slice-cutting-plane-axis-x-y-z-add-top-bottom")),
        "SLICE  offset along X:" => Some(("draw", "slice-offset-along-x")),
        "SLICE  offset along Y:" => Some(("draw", "slice-offset-along-y")),
        "SLICE  offset along Z:" => Some(("draw", "slice-offset-along-z")),
        "SLICE  Select solids or surfaces to slice, then press Enter:" => Some(("draw", "slice-select-targets")),
        "SLICE  Specify first point on slicing plane or [planar Object/Surface/Zaxis/View/XY/YZ/ZX/3points] <3points>:" => Some(("draw", "slice-first-point-or-method")),
        "SLICE  Specify first point on slicing plane:" => Some(("draw", "slice-first-plane-point")),
        "SLICE  Specify second point on slicing plane:" => Some(("draw", "slice-second-plane-point")),
        "SLICE  Specify third point on slicing plane:" => Some(("draw", "slice-third-plane-point")),
        "SLICE  Specify a point on the slicing plane:" => Some(("draw", "slice-point-on-plane")),
        "SLICE  Specify a point on the plane's normal axis:" => Some(("draw", "slice-point-on-normal-axis")),
        "SLICE  Specify a point on the current view plane:" => Some(("draw", "slice-point-on-view-plane")),
        "SLICE  Specify a point on the current UCS plane:" => Some(("draw", "slice-point-on-ucs-plane")),
        "SLICE  Select a planar curve object:" => Some(("draw", "slice-select-planar-object")),
        "SLICE  Select a planar surface:" => Some(("draw", "slice-select-planar-surface")),
        "SLICE  Select a cutting surface:" => Some(("draw", "slice-select-cutting-surface")),
        "SLICE  Specify a point on the desired side or [Both] <Both>:" => Some(("draw", "slice-select-side-or-both")),
        "SLICE  Select a sliced object to keep or [Both] <Both>:" => Some(("draw", "slice-select-object-or-both")),
        "SLICE  The selected surface is not planar. Select a planar surface:" => Some(("draw", "slice-surface-not-planar")),
        "SLICE  The selected surface does not define one supported cutting sheet. Select another surface:" => Some(("draw", "slice-surface-not-supported")),
        "SLICE  The selected object does not define a plane. Select a planar curve object:" => Some(("draw", "slice-object-not-planar")),
        "planar Object" => Some(("draw", "slice-planar-object")),
        "Zaxis" => Some(("draw", "slice-zaxis")),
        "3points" => Some(("draw", "slice-three-points")),
        "Both" => Some(("common", "both")),
        "SLICE failed — the plane may not cross the solid." => Some(("common", "slice-failed-the-plane-may-not-cross-the-solid")),
        "SLICE: could not determine the solid's extent." => Some(("common", "slice-could-not-determine-the-solid-s-extent")),
        "SLICE: cut at {ax}={value}, kept the {} half." => Some(("common", "slice-cut-at-ax-value-kept-the-half")),
        "SLICE: select exactly one solid created this session." => Some(("common", "slice-select-exactly-one-solid-created-this-se")),
        "SLICE: the plane does not cross the solid on the kept side." => Some(("common", "slice-the-plane-does-not-cross-the-solid-on-th")),
        "SLICE: select at least one solid or surface." => Some(("common", "slice-select-at-least-one-target")),
        "SLICE: the cutting plane is invalid." => Some(("common", "slice-invalid-plane")),
        "SLICE: choose a point away from the cutting plane." => Some(("common", "slice-side-point-on-plane")),
        "SLICE: the cutting plane does not cross every selected object; no object was changed." => Some(("common", "slice-plane-misses-target")),
        "SLICE: the selected geometry has an unsupported surface intersection; no object was changed." => Some(("common", "slice-unsupported-intersection")),
        "SLICE: the cutting plane is coincident with source geometry; no object was changed." => Some(("common", "slice-coincident-plane")),
        "SLICE: the selected topology could not be split safely; no object was changed." => Some(("common", "slice-topology-refused")),
        "SLICE: a result could not be encoded; no object was changed." => Some(("common", "slice-result-encode-failed")),
        "SLICE: a result could not be displayed completely; no object was changed." => Some(("common", "slice-result-display-failed")),
        "SLICE: a result could not be committed; all source objects were retained." => Some(("common", "slice-result-commit-failed")),
        "SLICE: a retained result could not be updated." => Some(("common", "slice-retained-update-failed")),
        "SLICE: created %{count} result object(s)." => Some(("common", "slice-created-results")),
        "SOLID  Specify first point:" => Some(("draw", "solid-specify-first-point")),
        "SOLID  Specify fourth point:" => Some(("draw", "solid-specify-fourth-point")),
        "SOLID  Specify second point:" => Some(("draw", "solid-specify-second-point")),
        "SOLID  Specify third point:" => Some(("draw", "solid-specify-third-point")),
        "SPLINE  Specify first control point:" => Some(("draw", "spline-specify-first-control-point")),
        "SPLINE  Specify first point:" => Some(("draw", "spline-specify-first-point")),
        "SPLINE  Specify next point  [%{n} pts]:" => Some(("draw", "spline-specify-next-point-n-pts")),
        "SPLINEDIT  Select spline:" => Some(("modify", "splinedit-select-spline")),
        "SPLINEDIT  [CLOSE/OPEN/REVERSE/EXIT]:" => Some(("modify", "splinedit-close-open-reverse-exit")),
        "SPLINEFIT: fit a spline through {n} points." => Some(("common", "splinefit-fit-a-spline-through-n-points")),
        "SPLINEFIT: need at least 3 points." => Some(("common", "splinefit-need-at-least-3-points")),
        "SPLINEFIT: select a polyline to fit a spline through." => Some(("common", "splinefit-select-a-polyline-to-fit-a-spline-th")),
        "STEPOUT: exported to \"{}\"" => Some(("common", "stepout-exported-to")),
        "STEPOUT: no 3D mesh data in this drawing." => Some(("common", "stepout-no-3d-mesh-data-in-this-drawing")),
        "STEPOUT: {error}" => Some(("common", "stepout-error")),
        "STLOUT: exported to \"{}\"" => Some(("common", "stlout-exported-to")),
        "STLOUT: no 3D mesh data in this drawing." => Some(("common", "stlout-no-3d-mesh-data-in-this-drawing")),
        "STLOUT: {error}" => Some(("common", "stlout-error")),
        "STRETCH  Specify base point:" => Some(("modify", "stretch-specify-base-point")),
        "STRETCH  Specify first corner of crossing window  [%{count} objects]:" => Some(("modify", "stretch-specify-first-corner-of-crossing-window-count-objects")),
        "STRETCH  Specify first corner of crossing window:" => Some(("modify", "stretch-specify-first-corner-of-crossing-window")),
        "STRETCH  Specify new point  [base %{bx},%{bz}]:" => Some(("modify", "stretch-specify-new-point-base-bx-bz")),
        "STRETCH  Specify opposite corner:" => Some(("modify", "stretch-specify-opposite-corner")),
        "STRETCH: nothing crosses the window." => Some(("common", "stretch-nothing-crosses-the-window")),
        "STRETCH: {count} entity(ies) stretched." => Some(("common", "stretch-count-entity-ies-stretched")),
        "STyles" => Some(("styles", "styles-mixed-case")),
        "SWEEP  Select path (Line, Arc, LwPolyline):" => Some(("insert", "sweep-select-path-line-arc-lwpolyline")),
        "SWEEP  Select profile to sweep:" => Some(("insert", "sweep-select-profile-to-sweep")),
        "SWEEP: could not sweep profile along path. Use a closed 2D profile and a Line or Polyline path." => Some(("common", "sweep-could-not-sweep-profile-along-path-use-a")),
        "SWEEP: solid created." => Some(("common", "sweep-solid-created")),
        "SYNCPVIEWPORTS: master is not a viewport." => Some(("view", "syncpviewports-master-is-not-a-viewport")),
        "SYNCPVIEWPORTS: synced {n} viewport(s) to the master." => Some(("view", "syncpviewports-synced-n-viewport-s-to-the-mast")),
        "Save" => Some(("common", "save")),
        "Save As" => Some(("common", "save-as")),
        "Save As…" => Some(("styles", "save-as")),
        "Save Block" => Some(("modify", "save-block")),
        "Save Block Edit" => Some(("modify", "save-block-edit")),
        "Save Changes" => Some(("layers", "save-changes")),
        "Save Drawing As" => Some(("common", "save-drawing-as")),
        "Save New State" => Some(("layers", "save-new-state")),
        "Save Warning" => Some(("errors", "save-warning")),
        "Save already running for this drawing." => Some(("common", "save-already-running-for-this-drawing")),
        "Save anyway" => Some(("common", "save-anyway")),
        "Save as..." => Some(("modal", "save-as")),
        "Save captures the current settings of every layer in the drawing." => Some(("layers", "save-captures-the-current-settings-of-every-la")),
        "Save error: {e}" => Some(("common", "save-error-e")),
        "Save failed: {error}" => Some(("file", "save-failed-error")),
        "Save failed: {e}" => Some(("file", "save-failed-e")),
        "Save in source version" => Some(("common", "save-in-source-version")),
        "Save stopped: \"{file_name}\" changed outside Open CAD Studio." => Some(("file", "save-stopped-file-name-changed-outside-open-ca")),
        "Save the drawing before copying its file path." => Some(("common", "save-the-drawing-before-copying-its-file-path")),
        "Save the drawing before opening its file location." => Some(("common", "save-the-drawing-before-opening-its-file-locat")),
        "Save to PDF file…" => Some(("plot", "save-to-pdf-file")),
        "Saved File" => Some(("properties", "saved-file")),
        "Saved download, but recent copy could not be stored: {error}" => Some(("common", "saved-download-but-recent-copy-could-not-be-st")),
        "Saved layer states: {}" => Some(("layers", "saved-layer-states")),
        "Saved layer values" => Some(("layers", "saved-layer-values")),
        "Saved state details" => Some(("layers", "saved-state-details")),
        "Saved, but the refreshed drawing is locked by another editor: {error}" => Some(("file", "saved-but-the-refreshed-drawing-is-locked-by-a")),
        "Saved: {filename}" => Some(("file", "saved-filename")),
        "Saved: {}" => Some(("file", "saved")),
        "Save…" => Some(("plot", "save")),
        "Saving now could destroy those external changes. Reload the disk copy, save your local work elsewhere, or explicitly overwrite it." => Some(("modal", "saving-now-could-destroy-those-external-change")),
        "Scale" => Some(("common", "scale")),
        "Scale Edit" => Some(("annotate", "scale-edit")),
        "Scale List" => Some(("annotate", "scale-list")),
        "Scale Manager" => Some(("modify", "scale-manager")),
        "Scale Object" => Some(("properties", "scale-object")),
        "Scale X" => Some(("properties", "scale-x")),
        "Scale Y" => Some(("properties", "scale-y")),
        "Scale Z" => Some(("properties", "scale-z")),
        "Scale factor:" => Some(("modify", "scale-factor")),
        "Scale lineweights" => Some(("plot", "scale-lineweights")),
        "Scale {arg} already exists." => Some(("view", "scale-arg-already-exists")),
        "Scale/Units" => Some(("modify", "scale-units")),
        "Scales" => Some(("styles", "scales")),
        "Scene cleared." => Some(("common", "scene-cleared")),
        "Scene cleared. Standard linetypes loaded." => Some(("common", "scene-cleared-standard-linetypes-loaded")),
        "Scientific" => Some(("common", "scientific")),
        "Screening (0-100):" => Some(("styles", "screening-0-100")),
        "Search layer states…" => Some(("layers", "search-layer-states")),
        "Search layers…" => Some(("common", "search-layers")),
        "Search patterns…" => Some(("properties", "search-patterns")),
        "Search plugins…" => Some(("plugins", "search-plugins")),
        "Searches Text, MText, Attribute Definitions, and block attribute values." => Some(("ui", "searches-text-mtext-attribute-definitions-and")),
        "Search…" => Some(("layers", "search")),
        "Second X" => Some(("properties", "second-x")),
        "Second Y" => Some(("properties", "second-y")),
        "Second Z" => Some(("properties", "second-z")),
        "Second seg. angle:" => Some(("common", "second-seg-angle")),
        "Section Object" => Some(("properties", "section-object")),
        "Section Points" => Some(("properties", "section-points")),
        "Section Symbol" => Some(("properties", "section-symbol")),
        "Section Vertices" => Some(("properties", "section-vertices")),
        "SectionSymbol" => Some(("properties", "sectionsymbol")),
        "Segments" => Some(("properties", "segments")),
        "Select All" => Some(("common", "select-all")),
        "Select Similar" => Some(("ui", "select-similar")),
        "Select Similar: {} added." => Some(("common", "select-similar-added")),
        "Select a plugin to read its GitHub README." => Some(("plugins", "select-a-plugin-to-read-its-github-readme")),
        "Select a style to view details." => Some(("styles", "select-a-style-to-view-details")),
        "Select a tangent object." => Some(("common", "select-a-tangent-object")),
        "Select an object to view properties" => Some(("properties", "select-an-object-to-view-properties")),
        "Select one object first, then run OBJECTSCALE." => Some(("common", "select-one-object-first-then-run-objectscale")),
        "Select the plugin again to load its README." => Some(("plugins", "select-the-plugin-again-to-load-its-readme")),
        "Selection Cycling" => Some(("ui", "selection-cycling")),
        "Selection Cycling\nRepeat-click to step through overlapping objects" => Some(("ui", "selection-cycling-repeat-click-to-step-through")),
        "Selection Filtering" => Some(("ui", "selection-filtering")),
        "Selection Filtering\nLimit which object types can be picked" => Some(("ui", "selection-filtering-limit-which-object-types-c")),
        "Selection has no printable area." => Some(("file", "selection-has-no-printable-area")),
        "Selection has no printable geometry." => Some(("file", "selection-has-no-printable-geometry")),
        "Self Illumination" => Some(("properties", "self-illumination")),
        "Send Feedback" => Some(("common", "send-feedback")),
        "Send Under Object" => Some(("ui", "send-under-object")),
        "Send to Back" => Some(("ui", "send-to-back")),
        "Sending to system printer…" => Some(("file", "sending-to-system-printer")),
        "Sent to printer: {printer}" => Some(("common", "sent-to-printer-printer")),
        "Sentence" => Some(("annotate", "sentence")),
        "Separate arrow blocks (DIMSAH)" => Some(("styles", "separate-arrow-blocks-dimsah")),
        "Seqend" => Some(("properties", "seqend")),
        "Set" => Some(("styles", "set")),
        "Set Base\nPoint" => Some(("insert", "set-base-point")),
        "Set Current" => Some(("common", "set-current")),
        "Set Size Relative to Screen" => Some(("styles", "set-size-relative-to-screen")),
        "Set Size in Absolute Units" => Some(("styles", "set-size-in-absolute-units")),
        "Set current" => Some(("plot", "set-current")),
        "Settings" => Some(("properties", "settings")),
        "Shade plot" => Some(("common", "shade-plot")),
        "Shaded" => Some(("view", "shaded")),
        "Shaded viewport options" => Some(("plot", "shaded-viewport-options")),
        "Shadow flags" => Some(("common", "shadow-flags")),
        "Shadows" => Some(("properties", "shadows")),
        "Shape" => Some(("properties", "shape")),
        "Sheet Set\nManager" => Some(("view", "sheet-set-manager")),
        "Shortcut '{key}' not found." => Some(("view", "shortcut-key-not-found")),
        "Shortcut '{key}' removed." => Some(("view", "shortcut-key-removed")),
        "Shortcut set: {key} → {cmd_str}" => Some(("view", "shortcut-set-key-cmd-str")),
        "Hide" => Some(("properties", "hide")),
        "Show" => Some(("properties", "show")),
        "Show Annotation Objects" => Some(("ui", "show-annotation-objects")),
        "Show Clipping" => Some(("properties", "show-clipping")),
        "Show Cropping" => Some(("properties", "show-cropping")),
        "Show History" => Some(("properties", "show-history")),
        "Show Intensity" => Some(("properties", "show-intensity")),
        "Show Lineweight" => Some(("ui", "show-lineweight")),
        "Show Lineweight\nLWDISPLAY" => Some(("ui", "show-lineweight-lwdisplay")),
        "Show Transparency" => Some(("ui", "show-transparency")),
        "Show Transparency\nForce opaque when off" => Some(("ui", "show-transparency-force-opaque-when-off")),
        "Show clipped" => Some(("properties", "show-clipped")),
        "Show details" => Some(("plugins", "show-details")),
        "Show image" => Some(("properties", "show-image")),
        "Show underlay" => Some(("properties", "show-underlay")),
        "Single" => Some(("common", "single")),
        "SingleLine" => Some(("properties", "singleline")),
        "Size" => Some(("common", "size")),
        "Sketch" => Some(("draw", "sketch")),
        "Snap override: {label} (next pick only)." => Some(("common", "snap-override-label-next-pick-only")),
        "Snap to\nUnderlays" => Some(("insert", "snap-to-underlays")),
        "Softness" => Some(("properties", "softness")),
        "Solid" => Some(("properties", "solid")),
        "Solid History" => Some(("properties", "solid-history")),
        "Solid type" => Some(("properties", "solid-type")),
        "Solid created." => Some(("common", "solid-created")),
        "Solid3D" => Some(("properties", "solid3d")),
        "Source Files" => Some(("properties", "source-files")),
        "Source block" => Some(("properties", "source-block")),
        "Source object not found." => Some(("common", "source-object-not-found")),
        "Spacing" => Some(("common", "spacing")),
        "Spacing (DIMDLI)" => Some(("common", "spacing-dimdli")),
        "Specify new vertex location:" => Some(("command", "specify-new-vertex-location")),
        "Specular" => Some(("properties", "specular")),
        "Specular Map" => Some(("properties", "specular-map")),
        "Sphere" => Some(("common", "sphere")),
        "Spherical" => Some(("model", "spherical")),
        "Spline" => Some(("common", "spline")),
        "Spline Edit" => Some(("modify", "spline-edit")),
        "Spline with arrow" => Some(("properties", "spline-with-arrow")),
        "Spline without arrow" => Some(("properties", "spline-without-arrow")),
        "Sponsors" => Some(("common", "sponsors")),
        "Standard" => Some(("common", "standard")),
        "Start" => Some(("common", "start")),
        "Start Angle" => Some(("properties", "start-angle")),
        "Start Limit" => Some(("properties", "start-limit")),
        "Start Tangent X" => Some(("properties", "start-tangent-x")),
        "Start Tangent Y" => Some(("properties", "start-tangent-y")),
        "Start Tangent Z" => Some(("properties", "start-tangent-z")),
        "Start tangent vector X" => Some(("properties", "start-tangent-vector-x")),
        "Start tangent vector Y" => Some(("properties", "start-tangent-vector-y")),
        "Start tangent vector Z" => Some(("properties", "start-tangent-vector-z")),
        "Square Root" => Some(("properties", "square-root")),
        "Start X" => Some(("properties", "start-x")),
        "Start Y" => Some(("properties", "start-y")),
        "Start Z" => Some(("properties", "start-z")),
        "Start angle" => Some(("common", "start-angle")),
        "Start parameter" => Some(("properties", "start-parameter")),
        "Start segment width" => Some(("properties", "start-segment-width")),
        "Start, Center, Angle" => Some(("draw", "start-center-angle")),
        "Start, Center, End" => Some(("draw", "start-center-end")),
        "Start, Center, Length" => Some(("draw", "start-center-length")),
        "Start, End, Angle" => Some(("draw", "start-end-angle")),
        "Start, End, Direction" => Some(("draw", "start-end-direction")),
        "Start, End, Radius" => Some(("draw", "start-end-radius")),
        "State" => Some(("properties", "state")),
        "Static" => Some(("properties", "static")),
        "Status" => Some(("common", "status")),
        "Status:" => Some(("layout", "status")),
        "Storage Size" => Some(("properties", "storage-size")),
        "Stored Point Counts" => Some(("properties", "stored-point-counts")),
        "StraightLineSegments" => Some(("styles", "straightlinesegments")),
        "Stretch" => Some(("common", "stretch")),
        "Style" => Some(("properties", "style")),
        "Style '{name}' created." => Some(("common", "style-name-created")),
        "Style '{name}' deleted." => Some(("common", "style-name-deleted")),
        "Style '{new}' already exists." => Some(("common", "style-new-already-exists")),
        "Style (DIMTXSTY)" => Some(("styles", "style-dimtxsty")),
        "Style Handle" => Some(("properties", "style-handle")),
        "Style Name" => Some(("properties", "style-name")),
        "Style justification" => Some(("properties", "style-justification")),
        "Style scale" => Some(("properties", "style-scale")),
        "Styles" => Some(("styles", "styles-title-case")),
        "Stylization Type" => Some(("properties", "stylization-type")),
        "Subtract" => Some(("model", "subtract")),
        "Success" => Some(("common", "success")),
        "Suffix (DIMAPOST)" => Some(("common", "suffix-dimapost")),
        "Suffix (DIMPOST)" => Some(("common", "suffix-dimpost")),
        "Support on Patreon" => Some(("common", "support-on-patreon")),
        "Supporters" => Some(("common", "supporters")),
        "Suppress 0 ft & 0 in" => Some(("common", "suppress-0-ft-0-in")),
        "Suppress 1st line (DIMSD1)" => Some(("draw", "suppress-1st-line-dimsd1")),
        "Suppress 1st line (DIMSE1)" => Some(("draw", "suppress-1st-line-dimse1")),
        "Suppress 2nd line (DIMSD2)" => Some(("draw", "suppress-2nd-line-dimsd2")),
        "Suppress 2nd line (DIMSE2)" => Some(("draw", "suppress-2nd-line-dimse2")),
        "Suppress leading" => Some(("common", "suppress-leading")),
        "Suppress leading & trailing" => Some(("common", "suppress-leading-trailing")),
        "Suppress leading zeros" => Some(("common", "suppress-leading-zeros")),
        "Suppress none" => Some(("common", "suppress-none")),
        "Suppress outside arrows (DIMSOXD)" => Some(("common", "suppress-outside-arrows-dimsoxd")),
        "Suppress trailing" => Some(("common", "suppress-trailing")),
        "Suppress trailing zeros" => Some(("common", "suppress-trailing-zeros")),
        "Surface" => Some(("properties", "surface")),
        "Surface Area" => Some(("properties", "surface-area")),
        "Surface Construction" => Some(("model", "surface-construction")),
        "Sweep / Path" => Some(("model", "sweep-path")),
        "Sweep Entity" => Some(("model", "sweep-entity")),
        "Sweep Entity Transform" => Some(("model", "sweep-entity-transform")),
        "Sweep Options" => Some(("model", "sweep-options")),
        "Sweep Transform" => Some(("model", "sweep-transform")),
        "Sweep Vector" => Some(("model", "sweep-vector")),
        "Switched to layout '{name}'." => Some(("common", "switched-to-layout-name")),
        "Symbol Scale" => Some(("properties", "symbol-scale")),
        "Sync Scales" => Some(("annotate", "sync-scales")),
        "Synchronize" => Some(("insert", "synchronize")),
        "System default printer" => Some(("plot", "system-default-printer")),
        "TABLE CELL  Enter text for [%{row},%{column}] <%{current}>:" => Some(("annotate", "table-cell-enter-text-row-column-current")),
        "TABLE  Enter column width [%{width}]:" => Some(("annotate", "table-enter-column-width-width")),
        "TABLE  Enter number of columns [%{cols}]:" => Some(("annotate", "table-enter-number-of-columns-cols")),
        "TABLE  Enter number of data rows [%{rows}]  (%{cols} cols):" => Some(("annotate", "table-enter-number-of-data-rows-rows-cols")),
        "TABLE  Enter number of rows (incl. header) [%{rows}]  (%{cols} cols):" => Some(("annotate", "table-enter-number-of-rows-incl-header-rows-co")),
        "TABLE  Enter row height [%{height}]:" => Some(("annotate", "table-enter-row-height-height")),
        "TABLE  Insertion behavior [Point/Window] <%{mode}>:" => Some(("annotate", "table-insertion-behavior-point-window-mode")),
        "TABLE  Specify insertion point  [%{cols}×%{rows}]:" => Some(("annotate", "table-specify-insertion-point-cols-rows")),
        "TABLE: block definition not found." => Some(("view", "table-block-definition-not-found")),
        "TABLE: edit applied." => Some(("view", "table-edit-applied")),
        "TABLE: field handle not found." => Some(("view", "table-field-handle-not-found")),
        "TABLE: row/column is out of range or the cell is locked." => Some(("view", "table-row-column-out-of-range-or-cell-locked")),
        "TABLE: select a table first." => Some(("view", "table-select-a-table-first")),
        "TABLE CELL: select a Table entity first, or row/col out of range." => Some(("view", "table-cell-select-a-table-entity-first-or-row")),
        "TABLE CELL: set [{row},{col}] = \"{text}\"." => Some(("view", "table-cell-set-row-col-text")),
        "TABLESTYLE: '{}' already exists." => Some(("layers", "tablestyle-already-exists")),
        "TABLESTYLE: '{}' created." => Some(("layers", "tablestyle-created")),
        "TCASE  [Upper / Lower / Sentence / Title]:" => Some(("annotate", "tcase-upper-lower-sentence-title")),
        "TCASE: select text objects first." => Some(("annotate", "tcase-select-text-objects-first")),
        "TCASE: updated {n} text object(s)." => Some(("annotate", "tcase-updated-n-text-object-s")),
        "TCOUNT  starting number (Enter for 1):" => Some(("annotate", "tcount-starting-number-enter-for-1")),
        "TCOUNT: numbered {} text object(s) from {start}." => Some(("annotate", "tcount-numbered-text-object-s-from-start")),
        "TCOUNT: select single-line text first." => Some(("annotate", "tcount-select-single-line-text-first")),
        "TEXT  Specify insertion point:" => Some(("annotate", "text-specify-insertion-point")),
        "TEXTEDIT Select an annotation object or [Undo Mode] <exit>:" => Some(("annotate", "textedit-select-an-annotation-object-or-undo-mode-exit")),
        "TEXTEDIT Select an annotation object or [Undo Mode]:" => Some(("annotate", "textedit-select-an-annotation-object-or-undo-mode")),
        "TEXTEDIT: selected entity is not text." => Some(("common", "textedit-selected-entity-is-not-text")),
        "TEXTEDITMODE = {v}" => Some(("styles", "texteditmode-v")),
        "TEXTEDITMODE set to {display_val}" => Some(("common", "texteditmode-set-to-display-val")),
        "TEXTEDITMODE set to {n}" => Some(("styles", "texteditmode-set-to-n")),
        "TEXTFIT  target width:" => Some(("annotate", "textfit-target-width")),
        "TEXTFIT: fitted {n} text object(s) to width {target}." => Some(("annotate", "textfit-fitted-n-text-object-s-to-width-target")),
        "TEXTFIT: select single-line text first." => Some(("annotate", "textfit-select-single-line-text-first")),
        "TEXTMASK  press Enter to mask the selected text:" => Some(("annotate", "textmask-press-enter-to-mask-the-selected-text")),
        "TEXTMASK: masked {n} text object(s)." => Some(("annotate", "textmask-masked-n-text-object-s")),
        "TEXTMASK: select text objects first." => Some(("annotate", "textmask-select-text-objects-first")),
        "TOLERANCE  Enter tolerance text:" => Some(("annotate", "tolerance-enter-tolerance-text")),
        "TOLERANCE  Specify insertion point  [%{text}]:" => Some(("annotate", "tolerance-specify-insertion-point-text")),
        "TOOLPALETTES: Tool Palettes not yet implemented." => Some(("view", "toolpalettes-tool-palettes-not-yet-implemented")),
        "TORIENT  New absolute rotation <Most Readable>:" => Some(("modify", "torient-new-absolute-rotation-most-readable")),
        "TORIENT  Specify second point:" => Some(("modify", "torient-specify-second-point")),
        "TRACE  Specify next point  [Undo]:" => Some(("draw", "trace-specify-next-point-undo")),
        "TRACE  Specify start point:" => Some(("draw", "trace-specify-start-point")),
        "TRACE  Specify trace width <%{w}>:" => Some(("draw", "trace-specify-trace-width-w")),
        "TRIM  Erase: click objects to delete [Enter = done]:" => Some(("modify", "trim-erase-click-objects-to-delete-enter-done")),
        "TRIM  Select cutting edges [{} picked, Enter = done]:" => Some(("modify", "trim-select-cutting-edges-picked-enter-done")),
        "TRIM{edge}  Click segment to remove (Shift+click extends):" => Some(("modify", "trim-edge-click-segment-to-remove-shift-click")),
        "TRIM{edge}  Crossing: first corner:" => Some(("modify", "trim-edge-crossing-first-corner")),
        "TRIM{edge}  Crossing: opposite corner:" => Some(("modify", "trim-edge-crossing-opposite-corner")),
        "TRIM{edge}  Fence: pick points [{} placed, Enter = trim crossed]:" => Some(("modify", "trim-edge-fence-pick-points-placed-enter-trim")),
        "Table" => Some(("common", "table")),
        "Table Breaks" => Some(("properties", "table-breaks")),
        "Table Style Manager" => Some(("styles", "table-style-manager")),
        "Table height" => Some(("properties", "table-height")),
        "Table style" => Some(("properties", "table-style")),
        "Table width" => Some(("properties", "table-width")),
        "TableStyles:\n  {}" => Some(("layers", "tablestyles")),
        "Tables" => Some(("annotate", "tables")),
        "Tag" => Some(("common", "tag")),
        "Tan, Tan, Radius" => Some(("draw", "tan-tan-radius")),
        "Tan, Tan, Tan" => Some(("draw", "tan-tan-tan")),
        "Tangent" => Some(("common", "tangent")),
        "Target X" => Some(("properties", "target-x")),
        "Target Y" => Some(("properties", "target-y")),
        "Target Z" => Some(("properties", "target-z")),
        "Tessellation" => Some(("properties", "tessellation")),
        "Text" => Some(("common", "text")),
        "Text Alignment" => Some(("properties", "text-alignment")),
        "Text Color" => Some(("properties", "text-color")),
        "Text Direction" => Some(("properties", "text-direction")),
        "Text Editor" => Some(("ui", "text-editor")),
        "Text Options" => Some(("ui", "text-options")),
        "Text Payload" => Some(("properties", "text-payload")),
        "Text Position" => Some(("properties", "text-position")),
        "Text Rotation (deg)" => Some(("properties", "text-rotation-deg")),
        "Text Size" => Some(("properties", "text-size")),
        "Text Style" => Some(("ui", "text-style")),
        "Text Style Manager" => Some(("styles", "text-style-manager")),
        "Text Visible" => Some(("properties", "text-visible")),
        "Text X" => Some(("properties", "text-x")),
        "Text Y" => Some(("properties", "text-y")),
        "Text Z" => Some(("properties", "text-z")),
        "Text alignment X" => Some(("properties", "text-alignment-x")),
        "Text alignment Y" => Some(("properties", "text-alignment-y")),
        "Text alignment Z" => Some(("properties", "text-alignment-z")),
        "Text alignment:" => Some(("common", "text-alignment")),
        "Text always left" => Some(("common", "text-always-left")),
        "Text angle:" => Some(("common", "text-angle")),
        "Text color" => Some(("common", "text-color-sentence-case")),
        "Text color (ACI):" => Some(("common", "text-color-aci")),
        "Text color ACI (DIMCLRT)" => Some(("common", "text-color-aci-dimclrt")),
        "Text fill mode (DIMTFILL)" => Some(("common", "text-fill-mode-dimtfill")),
        "Text frame" => Some(("common", "text-frame")),
        "Text gap (DIMGAP)" => Some(("common", "text-gap-dimgap")),
        "Text height" => Some(("common", "text-height-sentence-case")),
        "Text height:" => Some(("common", "text-height-label-sentence-case")),
        "Text inside" => Some(("properties", "text-inside")),
        "Text inside align" => Some(("properties", "text-inside-align")),
        "Text movement" => Some(("common", "text-movement")),
        "Text movement (DIMTMOVE)" => Some(("common", "text-movement-dimtmove")),
        "Text offset" => Some(("properties", "text-offset")),
        "Text out first" => Some(("common", "text-out-first")),
        "Text outside align" => Some(("properties", "text-outside-align")),
        "Text pos hor" => Some(("properties", "text-pos-hor")),
        "Text pos vert" => Some(("properties", "text-pos-vert")),
        "Text style" => Some(("common", "text-style")),
        "Text style:" => Some(("styles", "text-style-label-sentence-case")),
        "Text styles: {}" => Some(("layers", "text-styles")),
        "Text to find" => Some(("common", "text-to-find")),
        "Thaw All Layers" => Some(("layers", "thaw-all-layers")),
        "The file is open or being used by another application. Close it there and retry, or save this drawing under a different name." => Some(("modal", "the-file-is-open-or-being-used-by-another-appl")),
        "The selected layer state is no longer available." => Some(("modal", "the-selected-layer-state-is-no-longer-availabl")),
        "The selected object does not support annotation scales." => Some(("common", "the-selected-object-does-not-support-annotatio")),
        "Theme" => Some(("options", "theme")),
        "Thickness" => Some(("properties", "thickness")),
        "This block has no attributes." => Some(("ui", "this-block-has-no-attributes")),
        "This drawing contains %{count} AEC/Civil objects that \"%{target}\" cannot store, so they will not be saved.\n\nTo keep them, save in the source version (%{src_version})." => Some(("modal", "this-drawing-contains-count-aec-civil-objects")),
        "Through" => Some(("modify", "through")),
        "Tick size (DIMTSZ)" => Some(("common", "tick-size-dimtsz")),
        "Tile\nHoriz." => Some(("view", "tile-horiz")),
        "Tile\nVert." => Some(("view", "tile-vert")),
        "Title" => Some(("common", "title")),
        "Title Row:" => Some(("common", "title-row")),
        "Title row suppressed" => Some(("common", "title-row-suppressed")),
        "Toggle Dynamic Input" => Some(("common", "toggle-dynamic-input")),
        "Toggle Grid" => Some(("ui", "toggle-grid")),
        "Toggle Grid Snap" => Some(("ui", "toggle-grid-snap")),
        "Toggle Object Snap" => Some(("common", "toggle-object-snap")),
        "Toggle Object Snap Tracking" => Some(("common", "toggle-object-snap-tracking")),
        "Toggle Ortho" => Some(("common", "toggle-ortho")),
        "Toggle Polar Tracking" => Some(("common", "toggle-polar-tracking")),
        "Tol decimals (DIMALTTD)" => Some(("common", "tol-decimals-dimalttd")),
        "Tol zero supp (DIMALTTZ)" => Some(("common", "tol-zero-supp-dimalttz")),
        "Tol. decimals (DIMTDEC)" => Some(("common", "tol-decimals-dimtdec")),
        "Tol. scale (DIMTFAC)" => Some(("modify", "tol-scale-dimtfac")),
        "Tol. vert just (DIMTOLJ)" => Some(("common", "tol-vert-just-dimtolj")),
        "Tol. zero supp (DIMTZIN)" => Some(("common", "tol-zero-supp-dimtzin")),
        "Tolerance" => Some(("common", "tolerance")),
        "Tolerance display" => Some(("properties", "tolerance-display")),
        "Tolerance limit lower" => Some(("properties", "tolerance-limit-lower")),
        "Tolerance limit upper" => Some(("properties", "tolerance-limit-upper")),
        "Tolerance pos vert" => Some(("properties", "tolerance-pos-vert")),
        "Tolerance precision" => Some(("common", "tolerance-precision")),
        "Tolerance suppress leading zeros" => Some(("properties", "tolerance-suppress-leading-zeros")),
        "Tolerance suppress trailing zeros" => Some(("properties", "tolerance-suppress-trailing-zeros")),
        "Tolerance text height" => Some(("properties", "tolerance-text-height")),
        "Tolerances" => Some(("common", "tolerances")),
        "Tool\nPalettes" => Some(("common", "tool-palettes")),
        "Top" => Some(("common", "top")),
        "Top Center" => Some(("common", "top-center-title-case")),
        "Top Height" => Some(("properties", "top-height")),
        "Top Left" => Some(("common", "top-left-title-case")),
        "Top Right" => Some(("common", "top-right-title-case")),
        "Top attachment:" => Some(("common", "top-attachment")),
        "Top center" => Some(("common", "top-center-sentence-case")),
        "Top left" => Some(("common", "top-left-sentence-case")),
        "Top radius" => Some(("properties", "top-radius")),
        "Top right" => Some(("common", "top-right-sentence-case")),
        "Top to bottom" => Some(("common", "top-to-bottom")),
        "TopCenter" => Some(("common", "topcenter")),
        "TopLeft" => Some(("common", "topleft")),
        "TopOfTopLine" => Some(("styles", "topoftopline")),
        "TopRight" => Some(("common", "topright")),
        "Torus" => Some(("common", "torus")),
        "Total angle" => Some(("properties", "total-angle")),
        "Trace" => Some(("draw", "trace")),
        "Trailing" => Some(("styles", "trailing")),
        "Transform" => Some(("properties", "transform")),
        "Translucence" => Some(("properties", "translucence")),
        "Transparency" => Some(("common", "transparency")),
        "Triangles" => Some(("properties", "triangles")),
        "Trim" => Some(("modify", "trim")),
        "TrueType (system)" => Some(("common", "truetype-system")),
        "TrueType Font:" => Some(("styles", "truetype-font-label-mixed-case")),
        "TrueType font…" => Some(("styles", "truetype-font-picker-mixed-case")),
        "Ttr" => Some(("common", "ttr")),
        "Ttt" => Some(("draw", "ttt")),
        "Turn All Layers On" => Some(("layers", "turn-all-layers-on")),
        "Turn height" => Some(("properties", "turn-height")),
        "Turn slope" => Some(("properties", "turn-slope")),
        "Turns" => Some(("properties", "turns")),
        "Tutorials" => Some(("common", "tutorials")),
        "Twist" => Some(("properties", "twist")),
        "Two color" => Some(("properties", "two-color")),
        "Type" => Some(("common", "type")),
        "Type  SHORTCUTS SET <key> <cmd>  to add custom shortcuts." => Some(("command", "type-shortcuts-set-key-cmd-to-add-custom-short")),
        "Type a command or use the ribbon. Open OBJ: INSERT tab." => Some(("file", "type-a-command-or-use-the-ribbon-open-obj-inse")),
        "Type an alias and the command it runs (e.g. L → LINE). Apply to save to ocad.pgp; closing discards unapplied edits." => Some(("command", "type-an-alias-and-the-command-it-runs-e-g-l-li")),
        "U Isolines" => Some(("model", "u-isolines")),
        "U Vector 1" => Some(("model", "u-vector-1")),
        "U Vector 2" => Some(("model", "u-vector-2")),
        "UCS\nIcon" => Some(("view", "ucs-icon")),
        "UCS  name of UCS to delete:" => Some(("view", "ucs-name-of-ucs-to-delete")),
        "UCS  name to save current UCS as:" => Some(("view", "ucs-name-to-save-current-ucs-as")),
        "UCS  new origin point:" => Some(("view", "ucs-new-origin-point")),
        "UCS  option [World/Z/X/Y/Origin/Save/Delete] or name:" => Some(("view", "ucs-option-world-z-x-y-origin-save-delete-or-n")),
        "UCS  rotation angle about X (degrees):" => Some(("view", "ucs-rotation-angle-about-x-degrees")),
        "UCS  rotation angle about Y (degrees):" => Some(("view", "ucs-rotation-angle-about-y-degrees")),
        "UCS  rotation angle about Z (degrees):" => Some(("view", "ucs-rotation-angle-about-z-degrees")),
        "UCS  value:" => Some(("view", "ucs-value")),
        "UCS '{name}' not found." => Some(("layers", "ucs-name-not-found")),
        "UCS '{}' activated." => Some(("layers", "ucs-activated")),
        "UCS '{}' deleted." => Some(("layers", "ucs-deleted")),
        "UCS '{}' not found." => Some(("layers", "ucs-not-found")),
        "UCS '{}' not found.  Usage: UCS LIST | SAVE <name> | DELETE <name> | W | ORIGIN x,y,z | X/Y/Z <angle>" => Some(("layers", "ucs-not-found-usage-ucs-list-save-name-delete")),
        "UCS '{}' saved." => Some(("layers", "ucs-saved")),
        "UCS Name" => Some(("properties", "ucs-name")),
        "UCS Origin" => Some(("properties", "ucs-origin")),
        "UCS X" => Some(("properties", "ucs-x")),
        "UCS Y" => Some(("properties", "ucs-y")),
        "UCS Z" => Some(("properties", "ucs-z")),
        "UCS icon On" => Some(("properties", "ucs-icon-on")),
        "UCS icon at origin" => Some(("properties", "ucs-icon-at-origin")),
        "UCS origin set to ({:.4}, {:.4}, {:.4})." => Some(("layers", "ucs-origin-set-to-4-4-4")),
        "UCS per viewport" => Some(("properties", "ucs-per-viewport")),
        "UCS reset to World Coordinate System." => Some(("layers", "ucs-reset-to-world-coordinate-system")),
        "UCS rotated {:.2}° around X." => Some(("layers", "ucs-rotated-2-around-x")),
        "UCS rotated {:.2}° around Y." => Some(("layers", "ucs-rotated-2-around-y")),
        "UCS rotated {:.2}° around Z." => Some(("layers", "ucs-rotated-2-around-z")),
        "UCS: World" => Some(("common", "ucs-world")),
        "UCS: {}" => Some(("common", "ucs")),
        "UCSICON  [On / Off / NoOrigin / Origin]:" => Some(("view", "ucsicon-on-off-noorigin-origin")),
        "UCSICON {state}" => Some(("view", "ucsicon-state")),
        "UCSICON {sub}: updated {count} viewport(s) + model space." => Some(("view", "ucsicon-sub-updated-count-viewport-s-model-spa")),
        "UID" => Some(("model", "uid")),
        "UNDERLAY  [Fade / Contrast / On / Off / Mono / Clip]:" => Some(("view", "underlay-fade-contrast-on-off-mono-clip")),
        "UNDERLAY  contrast 0-100:" => Some(("view", "underlay-contrast-0-100")),
        "UNDERLAY  fade 0-100:" => Some(("view", "underlay-fade-0-100")),
        "UNDERLAY CLIP  [On / Off]:" => Some(("view", "underlay-clip-on-off")),
        "UNDERLAY MONO  [On / Off]:" => Some(("view", "underlay-mono-on-off")),
        "UNDERLAY: select underlay entities first." => Some(("view", "underlay-select-underlay-entities-first")),
        "UNGROUP  Select grouped objects:" => Some(("groups", "ungroup-select-grouped-objects")),
        "USERI{n} = {val}" => Some(("view", "useri-n-val")),
        "USERR{n} = {val}" => Some(("view", "userr-n-val")),
        "Ucs" => Some(("layers", "ucs")),
        "Unable to Save Drawing" => Some(("errors", "unable-to-save-drawing")),
        "Unable to acquire edit lock: {error}" => Some(("file", "unable-to-acquire-edit-lock-error")),
        "Unable to change UI language: {error}" => Some(("common", "unable-to-change-ui-language-error")),
        "Unable to load the plugin registry" => Some(("plugins", "unable-to-load-the-plugin-registry")),
        "Unable to save \"{file_name}\": file is in use by another application." => Some(("file", "unable-to-save-file-name-file-is-in-use-by-ano")),
        "Unable to save \"{}\": {error}" => Some(("file", "unable-to-save-error")),
        "Unable to save: file is in use." => Some(("command-line", "unable-to-save-file-is-in-use")),
        "Unable to verify the server certificate" => Some(("plugins", "unable-to-verify-the-server-certificate")),
        "Unavailable" => Some(("plugins", "unavailable")),
        "PDF scale: {scale}:1" => Some(("insert", "pdfui-pdf-scale")),
        "Applied" => Some(("properties", "applied")),
        "No PDF underlays found." => Some(("insert", "pdfui-no-pdf-underlays")),
        "Specify insertion point:" => Some(("insert", "pdfui-specify-insertion-point")),
        "Snap to Underlays" => Some(("insert", "refui-snap-to-underlays")),
        "Snap to Underlays ON" => Some(("insert", "refui-snap-to-underlays-on")),
        "Snap to Underlays OFF" => Some(("insert", "refui-snap-to-underlays-off")),
        "Edit Reference" => Some(("insert", "refui-edit-reference")),
        "Edit Reference\nIn-Place" => Some(("insert", "refui-edit-reference-in-place")),
        "Open\nReference" => Some(("insert", "refui-open-reference")),
        "Xref fading" => Some(("insert", "refui-xref-fading")),
        "Requires an integer between -90 and 90." => Some(("insert", "refui-requires-int-90")),
        "Underlay" => Some(("properties", "underlay")),
        "PDF Underlay" => Some(("properties", "pdf-underlay")),
        "DWF Underlay" => Some(("properties", "dwf-underlay")),
        "DGN Underlay" => Some(("properties", "dgn-underlay")),
        "Adjust colors for background" => Some(("properties", "adjust-colors-for-background")),
        "Page number" => Some(("properties", "page-number")),
        "Layer display overrides" => Some(("properties", "layer-display-overrides")),
        "Display in\nMonochrome" => Some(("insert", "pdfui-display-in-monochrome")),
        "Create Clipping\nBoundary" => Some(("insert", "pdfui-create-clipping-boundary")),
        "Remove\nClipping" => Some(("insert", "pdfui-remove-clipping")),
        "Show\nUnderlay" => Some(("insert", "pdfui-show-underlay")),
        "Enable\nSnap" => Some(("insert", "pdfui-enable-snap")),
        "External\nReferences" => Some(("insert", "pdfui-external-references")),
        "Edit\nLayers" => Some(("insert", "pdfui-edit-layers")),
        "Import As\nObjects" => Some(("insert", "pdfui-import-as-objects")),
        "PDF Layers" => Some(("insert", "pdfui-pdf-layers")),
        "PDF Import" => Some(("insert", "pdfui-pdf-import")),
        "Attach PDF Underlay" => Some(("insert", "pdfui-attach-pdf-underlay")),
        "Underlay Layers" => Some(("insert", "pdfui-underlay-layers")),
        "PDF Import Settings" => Some(("insert", "pdfui-pdf-import-settings")),
        "Import PDF" => Some(("insert", "pdfui-import-pdf")),
        "Select one or more pages from the PDF file:" => Some(("insert", "pdfui-select-one-or-more-pages-from-the-pdf-file")),
        "Page size:" => Some(("insert", "pdfui-page-size")),
        "Reference name:" => Some(("insert", "pdfui-reference-name")),
        "Search for layer" => Some(("insert", "pdfui-search-for-layer")),
        "This file does not contain any layers." => Some(("insert", "pdfui-this-file-does-not-contain-any-layers")),
        "Select an underlay to view its layers." => Some(("insert", "pdfui-select-an-underlay-to-view-its-layers")),
        "PDF data to import" => Some(("insert", "pdfui-pdf-data-to-import")),
        "Vector geometry" => Some(("insert", "pdfui-vector-geometry")),
        "Solid fills" => Some(("insert", "pdfui-solid-fills")),
        "TrueType text" => Some(("insert", "pdfui-truetype-text")),
        "Raster images" => Some(("insert", "pdfui-raster-images")),
        "Use PDF layers" => Some(("insert", "pdfui-use-pdf-layers")),
        "Create object layers" => Some(("insert", "pdfui-create-object-layers")),
        "Import options" => Some(("insert", "pdfui-import-options")),
        "Import as block" => Some(("insert", "pdfui-import-as-block")),
        "Join line and arc segments" => Some(("insert", "pdfui-join-line-and-arc-segments")),
        "Convert solid fills to hatches" => Some(("insert", "pdfui-convert-solid-fills-to-hatches")),
        "Apply lineweight properties" => Some(("insert", "pdfui-apply-lineweight-properties")),
        "Infer linetypes from collinear dashes" => Some(("insert", "pdfui-infer-linetypes-from-collinear-dashes")),
        "Page to import" => Some(("insert", "pdfui-page-to-import")),
        "Page:" => Some(("insert", "pdfui-page")),
        "Total: {count}" => Some(("insert", "pdfui-total-count")),
        "Pages" => Some(("insert", "pdfui-pages")),
        "Placement" => Some(("insert", "pdfui-placement")),
        "On screen" => Some(("insert", "pdfui-on-screen")),
        "File details" => Some(("insert", "pdfui-file-details")),
        "{count} pages" => Some(("insert", "pdfui-page-count")),
        "Selected pages: {pages}" => Some(("insert", "pdfui-selected-pages")),
        "{count} layers, {hidden} hidden" => Some(("insert", "pdfui-layer-summary")),
        "Page size: {size}" => Some(("insert", "pdfui-page-size-size")),
        "Specify insertion point on-screen" => Some(("insert", "pdfui-specify-insertion-point-on-screen")),
        "Scale:" => Some(("insert", "pdfui-scale")),
        "Rotation:" => Some(("insert", "pdfui-rotation")),
        "Attaches a PDF file as an underlay." => Some(("insert", "pdfui-attaches-a-pdf-file-as-an-underlay")),
        "Turns the layers of a PDF underlay on or off." => Some(("insert", "pdfui-turns-the-layers-of-a-pdf-underlay-on-or-off")),
        "Imports the geometry, fills, raster images and text of a PDF file as drawing objects." => Some(("insert", "pdfui-imports-the-geometry-fills-raster-images-and-text-of-a-pdf-f")),
        "Select PDF File" => Some(("insert", "select-pdf-file")),
        "Underlay\nLayers" => Some(("insert", "underlay-layers")),
        "Underlay Adjust" => Some(("properties", "underlay-adjust")),
        "Underlay layers" => Some(("properties", "underlay-layers")),
        "Underlay name" => Some(("properties", "underlay-name")),
        "Underlay path" => Some(("properties", "underlay-path")),
        "Underlay {:x}: fade={}, contrast={}, on={}, clip={}, mono={}" => Some(("view", "underlay-x-fade-contrast-on-clip-mono")),
        "Underlined" => Some(("properties", "underlined")),
        "Undo" => Some(("common", "undo")),
        "Undo: {last_label}" => Some(("common", "undo-last-label")),
        "Ungroup" => Some(("groups", "ungroup")),
        "Uniform scale" => Some(("common", "uniform-scale")),
        "Uninstall" => Some(("plugins", "uninstall")),
        "Union" => Some(("model", "union")),
        "Unisolate Layers" => Some(("layers", "unisolate-layers")),
        "Unit" => Some(("common", "unit")),
        "Unit Factor" => Some(("properties", "unit-factor")),
        "Unit format (DIMALTU)" => Some(("common", "unit-format-dimaltu")),
        "Unit format (DIMUNIT)" => Some(("common", "unit-format-dimunit")),
        "Unitless" => Some(("common", "unitless")),
        "Units" => Some(("properties", "units")),
        "Unknown" => Some(("common", "unknown")),
        "Unknown Flags" => Some(("properties", "unknown-flags")),
        "Unknown command: {cmd}" => Some(("command", "unknown-command-cmd")),
        "Unsaved Changes" => Some(("common", "unsaved-changes")),
        "Unsupported file type: {}" => Some(("common", "unsupported-file-type")),
        "Up" => Some(("common", "up")),
        "Update Available" => Some(("common", "update-available")),
        "Update from Drawing" => Some(("layers", "update-from-drawing")),
        "Update to  %{tag}" => Some(("plugins", "update-to-tag")),
        "Updated {changed} underlay(s)." => Some(("view", "updated-changed-underlay-s")),
        "Upper" => Some(("annotate", "upper")),
        "Upside down" => Some(("common", "upside-down")),
        "Usage: ADJUST BRIGHTNESS|CONTRAST|FADE <0-100>" => Some(("view", "usage-adjust-brightness-contrast-fade-0-100")),
        "Usage: ANNOSCALE <ratio>  e.g. 1:50, 2:1, or a factor" => Some(("view", "usage-annoscale-ratio-e-g-1-50-2-1-or-a-factor")),
        "Usage: ATTDISP ON | OFF | NORMAL" => Some(("draw", "usage-attdisp-on-off-normal")),
        "Usage: ATTSYNC <block name>.  Blocks: {}" => Some(("insert", "usage-attsync-block-name-blocks")),
        "Usage: BASE <x> <y> [z]" => Some(("insert", "usage-base-x-y-z")),
        "Usage: CAL <expression>   e.g. CAL (2+3)*4" => Some(("inquiry", "usage-cal-expression-e-g-cal-2-3-4")),
        "Usage: CELTSCALE [value]" => Some(("styles", "usage-celtscale-value")),
        "Usage: DIMSTYLE NEW <name>" => Some(("layers", "usage-dimstyle-new-name")),
        "Usage: DIMSTYLE SET <name> <property> <value>" => Some(("layers", "usage-dimstyle-set-name-property-value")),
        "Usage: DRAWORDER F|FRONT | B|BACK | A|ABOVE <handle> | U|UNDER <handle>" => Some(("view", "usage-draworder-f-front-b-back-a-above-handle")),
        "Usage: HYPERLINK <url>   (select objects first)" => Some(("view", "usage-hyperlink-url-select-objects-first")),
        "Usage: LAYDEL <layer name>" => Some(("layers", "usage-laydel-layer-name")),
        "Usage: LAYER COLOR <name> <aci_index>" => Some(("layers", "usage-layer-color-name-aci-index")),
        "Usage: LAYER LIST | NEW <name> | ON/OFF/FREEZE/THAW/LOCK/UNLOCK <name> | COLOR <name> <aci> | SET <name>" => Some(("layers", "usage-layer-list-new-name-on-off-freeze-thaw-l")),
        "Usage: LAYER NEW <name>" => Some(("layers", "usage-layer-new-name")),
        "Usage: LAYERSTATE DELETE <name>" => Some(("layers", "usage-layerstate-delete-name")),
        "Usage: LAYERSTATE RESTORE <name>" => Some(("layers", "usage-layerstate-restore-name")),
        "Usage: LAYERSTATE SAVE <name>" => Some(("layers", "usage-layerstate-save-name")),
        "Usage: LAYERSTATE SAVE|RESTORE|DELETE <name> | ? (list)" => Some(("layers", "usage-layerstate-save-restore-delete-name-list")),
        "Usage: LAYMRG <source layer> <target layer>" => Some(("layers", "usage-laymrg-source-layer-target-layer")),
        "Usage: LINETYPE LIST | SET <name>" => Some(("styles", "usage-linetype-list-set-name")),
        "Usage: LINETYPE SET <name | ByLayer | ByBlock>" => Some(("styles", "usage-linetype-set-name-bylayer-byblock")),
        "Usage: LTSCALE [value]" => Some(("styles", "usage-ltscale-value")),
        "Usage: LWDISPLAY [ON|OFF]" => Some(("styles", "usage-lwdisplay-on-off")),
        "Usage: MLEADERSTYLE LIST | NEW <name> | SET <name> <prop> <val> | CURRENT [<name>]" => Some(("layers", "usage-mleaderstyle-list-new-name-set-name-prop")),
        "Usage: MLEADERSTYLE NEW <name>" => Some(("layers", "usage-mleaderstyle-new-name")),
        "Usage: MLEADERSTYLE SET <name> <property> <value>" => Some(("layers", "usage-mleaderstyle-set-name-property-value")),
        "Usage: MLSTYLE NEW <name>" => Some(("layers", "usage-mlstyle-new-name")),
        "Usage: MLSTYLE SET <name>" => Some(("layers", "usage-mlstyle-set-name")),
        "Usage: MLSTYLE [LIST|NEW <name>|SET <name>|DEL <name>]" => Some(("layers", "usage-mlstyle-list-new-name-set-name-del-name")),
        "Usage: PLAN UCS <name>" => Some(("layers", "usage-plan-ucs-name")),
        "Usage: PLAN [CURRENT / UCS <name> / WORLD]" => Some(("layers", "usage-plan-current-ucs-name-world")),
        "Usage: PLOTSTYLE [LOAD | CLEAR | STATUS]" => Some(("view", "usage-plotstyle-load-clear-status")),
        "Usage: POLYSOLID <width> <height>   (select a polyline first)" => Some(("draw", "usage-polysolid-width-height-select-a-polyline")),
        "Usage: PYRAMID <radius> <height> [sides]   (default 4 sides)" => Some(("draw", "usage-pyramid-radius-height-sides-default-4-si")),
        "Usage: QSELECT TYPE|LAYER|COLOR|LINETYPE <value>" => Some(("inquiry", "usage-qselect-type-layer-color-linetype-value")),
        "Usage: RENAME <type> <old> <new>  (types: LAYER BLOCK STYLE DIMSTYLE LINETYPE UCS VIEW)" => Some(("styles", "usage-rename-type-old-new-types-layer-block-st")),
        "Usage: SCALELISTEDIT DELETE <name>" => Some(("view", "usage-scalelistedit-delete-name")),
        "Usage: SCALELISTEDIT [ADD 1:50 | DELETE 1:50]" => Some(("view", "usage-scalelistedit-add-1-50-delete-1-50")),
        "Usage: SCALETEXT <factor>  or  SCALETEXT H <height>" => Some(("styles", "usage-scaletext-factor-or-scaletext-h-height")),
        "Usage: SCRIPT <path to .scr file>" => Some(("file", "usage-script-path-to-scr-file")),
        "Usage: SHORTCUTS CLEAR <key>" => Some(("view", "usage-shortcuts-clear-key")),
        "Usage: SHORTCUTS LIST | SET <key> <cmd> | CLEAR <key>" => Some(("view", "usage-shortcuts-list-set-key-cmd-clear-key")),
        "Usage: SHORTCUTS SET <key> <command>  e.g. SHORTCUTS SET CTRL+D DIST" => Some(("view", "usage-shortcuts-set-key-command-e-g-shortcuts")),
        "Usage: TABLE CELL <row> <col> <text>" => Some(("view", "usage-table-cell-row-col-text")),
        "Usage: TABLE CELL | INSERTROW | DELETEROW | INSERTCOL | DELETECOL | MERGE | UNMERGE | ROWHEIGHT | COLWIDTH | LOCK | BLOCK | FORMULA | FIELD" => Some(("view", "usage-table-edit-actions")),
        "Usage: TABLESTYLE NEW <name>" => Some(("layers", "usage-tablestyle-new-name")),
        "Usage: TABLESTYLE [LIST|NEW <name>]" => Some(("layers", "usage-tablestyle-list-new-name")),
        "Usage: TCASE <Upper|Lower|Sentence|Title>" => Some(("annotate", "usage-tcase-upper-lower-sentence-title")),
        "Usage: UCS DELETE <name>" => Some(("layers", "usage-ucs-delete-name")),
        "Usage: UCS ORIGIN x,y,z" => Some(("layers", "usage-ucs-origin-x-y-z")),
        "Usage: UCS SAVE <name>" => Some(("layers", "usage-ucs-save-name")),
        "Usage: UCS X <angle_degrees>" => Some(("layers", "usage-ucs-x-angle-degrees")),
        "Usage: UCS Y <angle_degrees>" => Some(("layers", "usage-ucs-y-angle-degrees")),
        "Usage: UCS Z <angle_degrees>" => Some(("layers", "usage-ucs-z-angle-degrees")),
        "Usage: UCSICON ON | OFF | NOORIGIN | ORIGIN" => Some(("view", "usage-ucsicon-on-off-noorigin-origin")),
        "Usage: UNDERLAY [FADE <n>|CONTRAST <n>|ON|OFF|CLIP ON|OFF|MONO ON|OFF]" => Some(("view", "usage-underlay-fade-n-contrast-n-on-off-clip-o")),
        "Usage: UNDO [number of steps]" => Some(("file", "usage-undo-number-of-steps")),
        "Usage: USERI <1-5> <int> | USERR <1-5> <real>" => Some(("view", "usage-useri-1-5-int-userr-1-5-real")),
        "Usage: USERI <1-5> <integer>" => Some(("view", "usage-useri-1-5-integer")),
        "Usage: USERR <1-5> <real>" => Some(("view", "usage-userr-1-5-real")),
        "Usage: VIEW DELETE <name>" => Some(("layers", "usage-view-delete-name")),
        "Usage: VIEW LIST | VIEW SAVE <name> | VIEW RESTORE <name> | VIEW DELETE <name>" => Some(("layers", "usage-view-list-view-save-name-view-restore-na")),
        "Usage: VIEW RESTORE <name>" => Some(("layers", "usage-view-restore-name")),
        "Usage: VIEW SAVE <name>" => Some(("layers", "usage-view-save-name")),
        "Usage: XDATA LIST | SET <app> <value> | CLEAR [app]" => Some(("view", "usage-xdata-list-set-app-value-clear-app")),
        "Usage: {prefix} FONT <style> <font_file>" => Some(("layers", "usage-prefix-font-style-font-file")),
        "Usage: {prefix} LIST | NEW <name> | FONT <style> <file> | WIDTH <style> <factor> | OBLIQUE <style> <angle>" => Some(("layers", "usage-prefix-list-new-name-font-style-file-wid")),
        "Usage: {prefix} NEW <name>" => Some(("layers", "usage-prefix-new-name")),
        "Usage: {prefix} OBLIQUE <style> <angle_degrees>" => Some(("layers", "usage-prefix-oblique-style-angle-degrees")),
        "Usage: {prefix} WIDTH <style> <factor>" => Some(("layers", "usage-prefix-width-style-factor")),
        "Uniform" => Some(("properties", "uniform")),
        "Use Limits" => Some(("properties", "use-limits")),
        "Used for the first save of a new drawing. Existing drawings keep their file type and version." => Some(("file", "used-for-the-first-save-of-a-new-drawing-exist")),
        "User\nInterface" => Some(("manage", "user-interface")),
        "User Defined" => Some(("properties", "user-defined")),
        "User Text" => Some(("properties", "user-text")),
        "V Isolines" => Some(("model", "v-isolines")),
        "V Margin:" => Some(("common", "v-margin")),
        "V Vector 1" => Some(("model", "v-vector-1")),
        "V Vector 2" => Some(("model", "v-vector-2")),
        "V-Align" => Some(("properties", "v-align")),
        "VIEW  [List / Save / Restore / Delete]:" => Some(("layers", "view-list-save-restore-delete")),
        "VIEW DELETE  view name:" => Some(("layers", "view-delete-view-name")),
        "VIEW RESTORE  view name:" => Some(("layers", "view-restore-view-name")),
        "VIEW SAVE  new view name:" => Some(("layers", "view-save-new-view-name")),
        "VPLAYER  F <layer> = Freeze  |  T <layer> = Thaw  |  Enter = Exit" => Some(("layout", "vplayer-f-layer-freeze-t-layer-thaw-enter-exit")),
        "VPLAYER: enter a viewport first (double-click or MS)." => Some(("view", "vplayer-enter-a-viewport-first-double-click-or")),
        "VPLAYER: frozen layers: {}" => Some(("view", "vplayer-frozen-layers")),
        "VPLAYER: no frozen layers in active viewport." => Some(("view", "vplayer-no-frozen-layers-in-active-viewport")),
        "VPLAYER: switch to a paper space layout first." => Some(("view", "vplayer-switch-to-a-paper-space-layout-first")),
        "VPLAYER: {frozen_count} layer(s) frozen in viewport." => Some(("common", "vplayer-frozen-count-layer-s-frozen-in-viewpor")),
        "VPLAYER: {thawed_count} layer(s) thawed in viewport." => Some(("common", "vplayer-thawed-count-layer-s-thawed-in-viewpor")),
        "VPORTS  Configuration [SIngle/2H/2V/4]:" => Some(("view", "vports-configuration-single-2h-2v-4")),
        "VPORTS: created {} viewport(s) [{}]." => Some(("view", "vports-created-viewport-s")),
        "VPORTS: use SINGLE | 2H | 2V | 4." => Some(("view", "vports-use-single-2h-2v-4")),
        "VPORTS: {e}" => Some(("view", "vports-e")),
        "VPORTS: {n} viewport(s)." => Some(("view", "vports-n-viewport-s")),
        "VSCURRENT  visual style  [Shaded / Wireframe / Hidden / Realistic / Conceptual / X-ray]:" => Some(("styles", "vscurrent-visual-style-shaded-wireframe-hidden")),
        "Value" => Some(("common", "value")),
        "Value:" => Some(("ui", "value")),
        "Verify" => Some(("properties", "verify")),
        "Version" => Some(("common", "version")),
        "Vertex" => Some(("properties", "vertex")),
        "Vertex 1 X" => Some(("properties", "vertex-1-x")),
        "Vertex 1 Y" => Some(("properties", "vertex-1-y")),
        "Vertex 1 Z" => Some(("properties", "vertex-1-z")),
        "Vertex 2 X" => Some(("properties", "vertex-2-x")),
        "Vertex 2 Y" => Some(("properties", "vertex-2-y")),
        "Vertex 2 Z" => Some(("properties", "vertex-2-z")),
        "Vertex 3 X" => Some(("properties", "vertex-3-x")),
        "Vertex 3 Y" => Some(("properties", "vertex-3-y")),
        "Vertex 3 Z" => Some(("properties", "vertex-3-z")),
        "Vertex 4 X" => Some(("properties", "vertex-4-x")),
        "Vertex 4 Y" => Some(("properties", "vertex-4-y")),
        "Vertex 4 Z" => Some(("properties", "vertex-4-z")),
        "Vertex X" => Some(("properties", "vertex-x")),
        "Vertex Y" => Some(("properties", "vertex-y")),
        "Vertex Z" => Some(("properties", "vertex-z")),
        "Vertex count" => Some(("properties", "vertex-count")),
        "Vertical" => Some(("common", "vertical")),
        "Vertical Direction" => Some(("properties", "vertical-direction")),
        "Vertical pos (DIMTAD)" => Some(("common", "vertical-pos-dimtad")),
        "Vertical pos (DIMTVP)" => Some(("common", "vertical-pos-dimtvp")),
        "Vertices" => Some(("properties", "vertices")),
        "Videos" => Some(("common", "videos")),
        "Videos load from the internet." => Some(("common", "videos-load-from-the-internet")),
        "View" => Some(("common", "view")),
        "View\nCube" => Some(("view", "view-cube")),
        "View '{}' deleted." => Some(("layers", "view-deleted")),
        "View '{}' not found." => Some(("layers", "view-not-found")),
        "View '{}' restored." => Some(("layers", "view-restored")),
        "View '{}' saved." => Some(("layers", "view-saved")),
        "View Border" => Some(("properties", "view-border")),
        "View Representation" => Some(("properties", "view-representation")),
        "View Silhouettes" => Some(("model", "view-silhouettes")),
        "View Symbol Flags" => Some(("properties", "view-symbol-flags")),
        "View Symbol Version" => Some(("properties", "view-symbol-version")),
        "View on GitHub" => Some(("plugins", "view-on-github")),
        "View: Home" => Some(("common", "view-home")),
        "View: {}" => Some(("common", "view-value")),
        "ViewBorder" => Some(("properties", "viewborder")),
        "ViewCube Back" => Some(("view", "viewcube-back")),
        "ViewCube Bottom" => Some(("view", "viewcube-bottom")),
        "ViewCube Front" => Some(("view", "viewcube-front")),
        "ViewCube Left" => Some(("view", "viewcube-left")),
        "ViewCube Right" => Some(("view", "viewcube-right")),
        "ViewCube Top" => Some(("view", "viewcube-top")),
        "Viewport" => Some(("common", "viewport")),
        "Viewport\nConfiguration" => Some(("view", "viewport-configuration")),
        "Viewport / Annotation Scale Sync" => Some(("ui", "viewport-annotation-scale-sync")),
        "Viewport Count" => Some(("ui", "viewport-count")),
        "Viewport Tools" => Some(("view", "viewport-tools")),
        "Viewport could not be added: {e}" => Some(("properties", "viewport-could-not-be-added-e")),
        "Viewport count in active layout" => Some(("ui", "viewport-count-in-active-layout")),
        "Viewport visual style: {label}" => Some(("common", "viewport-visual-style-label")),
        "Visual\nStyle" => Some(("view", "visual-style")),
        "Visual Style" => Some(("common", "visual-style")),
        "Visual style" => Some(("properties", "visual-style")),
        "Visual style: {label}" => Some(("common", "visual-style-label")),
        "Visual style: {label}." => Some(("file", "visual-style-label")),
        "Volume" => Some(("properties", "volume")),
        "WBLOCK  Saved \"{block_name}\" → \"{}\"" => Some(("common", "wblock-saved-block-name")),
        "WBLOCK save failed: {error}" => Some(("common", "wblock-save-failed-error")),
        "WIPEOUT  Specify first point or [Frames/Polyline] <Polyline>:" => Some(("draw", "wipeout-specify-first-point-or-polyline")),
        "WIPEOUT  Specify next point or [Undo/Close] (%{n} points):" => Some(("draw", "wipeout-specify-next-point-or-undo-close-n-poi")),
        "WIPEOUT Frames  Enter frame mode [Off/On/DisplayButNotPlot] <%{mode}>:" => Some(("draw", "wipeout-frames-enter-frame-mode")),
        "WIPEOUT Polyline  Erase source polyline? [Yes/No] <No>:" => Some(("draw", "wipeout-polyline-erase-source")),
        "WIPEOUT Polyline  Select a closed planar polyline:" => Some(("draw", "wipeout-polyline-select-a-closed-planar-polyli")),
        "WIPEOUT Polyline: select a straight, closed, planar 2D polyline with at least 3 non-intersecting vertices." => Some(("draw", "wipeout-polyline-invalid")),
        "WIPEOUT Rectangular  Specify first corner:" => Some(("draw", "wipeout-rectangular-specify-first-corner")),
        "WIPEOUT Rectangular  Specify opposite corner:" => Some(("draw", "wipeout-rectangular-specify-opposite-corner")),
        "Warning" => Some(("errors", "warning")),
        "Warning: {} corrupt entities dropped (parser junk — bad normals / counts)" => Some(("file", "warning-corrupt-entities-dropped-parser-junk-b")),
        "Warning: {} corrupt xref entities dropped" => Some(("file", "warning-corrupt-xref-entities-dropped")),
        "Watertight" => Some(("properties", "watertight")),
        "Web" => Some(("common", "web")),
        "Web File" => Some(("properties", "web-file")),
        "Wedge" => Some(("common", "wedge")),
        "Weight" => Some(("common", "weight")),
        "Welcome" => Some(("common", "welcome")),
        "What to plot" => Some(("plot", "what-to-plot")),
        "What's new" => Some(("ui", "what-s-new")),
        "White" => Some(("common", "white")),
        "Width" => Some(("common", "width")),
        "Width Factor" => Some(("common", "width-factor-title-case")),
        "Width Factor:" => Some(("common", "width-factor-label-title-case")),
        "Width factor" => Some(("common", "width-factor-sentence-case")),
        "Width: %{value}" => Some(("ui", "width-value")),
        "Window" => Some(("common", "window")),
        "Windows desktop" => Some(("styles", "windows-desktop")),
        "Wipeout" => Some(("common", "wipeout")),
        "Wireframe" => Some(("common", "wireframe")),
        "Wireframe Cache" => Some(("model", "wireframe-cache")),
        "Wires" => Some(("model", "wires")),
        "With Block" => Some(("properties", "with-block")),
        "With Text" => Some(("common", "with-text")),
        "With Tolerance" => Some(("properties", "with-tolerance")),
        "Wizard Flag" => Some(("properties", "wizard-flag")),
        "Working…" => Some(("ui", "working")),
        "World" => Some(("common", "world")),
        "Write Block" => Some(("insert", "write-block")),
        "X (mm)" => Some(("plot", "x-mm")),
        "Select Drawing to Import Page Setups From" => Some(("plot", "select-drawing-to-import-page-setups-from")),
        "Drawings and templates" => Some(("plot", "drawings-and-templates")),
        "PSETUPIN: {count} page setup(s) imported, {replaced} replaced." => Some(("plot", "psetupin-count-page-setup-s-imported-replaced-replaced")),
        "PSETUPIN: {error}" => Some(("plot", "psetupin-error")),
        "PSETUPIN: no page setup named \"{want}\" in {file}." => Some(("plot", "psetupin-no-page-setup-named-want-in-file")),
        "PSETUPIN: nothing to import from {file}." => Some(("plot", "psetupin-nothing-to-import-from-file")),
        "No named page setups in this drawing." => Some(("plot", "no-named-page-setups-in-this-drawing")),
        "Import…" => Some(("plot", "import-ellipsis")),
        "Show the page setup for new layouts" => Some(("plot", "show-the-page-setup-for-new-layouts")),
        "X (in)" => Some(("plot", "x-in")),
        "Y (in)" => Some(("plot", "y-in")),
        "Hide paperspace objects" => Some(("plot", "hide-paperspace-objects")),
        "Save changes to layout" => Some(("plot", "save-changes-to-layout")),
        "{printer} does not support {sheet}; switched to its default sheet {default} (PAPERUPDATE = 1)." => Some(("plot", "printer-does-not-support-sheet-switched-to-its-default-sheet-default-paperupdate-1")),
        "{printer} does not support {sheet}; the sheet is kept (PAPERUPDATE = 0)." => Some(("plot", "printer-does-not-support-sheet-the-sheet-is-kept-paperupdate-0")),
        "{printer}: the printer reports no sheets; the paper catalogue is used." => Some(("plot", "printer-the-printer-reports-no-sheets-the-paper-catalogue-is-used")),
        "{printer}: {count} sheet(s) reported" => Some(("plot", "printer-count-sheet-s-reported")),
        "Default sheet: {sheet}" => Some(("plot", "default-sheet-sheet")),
        "Default sheet: not reported" => Some(("plot", "default-sheet-not-reported")),
        "Default printer: {name}" => Some(("plot", "default-printer-name")),
        "Default printer: none reported by the system" => Some(("plot", "default-printer-none-reported-by-the-system")),
        "Printers: none listed by the system" => Some(("plot", "printers-none-listed-by-the-system")),
        "Printers ({count}):" => Some(("plot", "printers-count")),
        "Could not list printers: {error}" => Some(("plot", "could-not-list-printers-error")),
        "Plots go through the PDF application: {command}" => Some(("plot", "plots-go-through-the-pdf-application-command")),
        "Plots go straight to the printer (no PDF application registers a print verb)." => Some(("plot", "plots-go-straight-to-the-printer-no-pdf-application-registers-a-print-verb")),
        "via the PDF application" => Some(("plot", "via-the-pdf-application")),
        "direct print" => Some(("plot", "direct-print")),
        "X = %{x},  Y = %{y},  Z = %{z}" => Some(("inquiry", "x-x-y-y-z-z")),
        "X Scale" => Some(("properties", "x-scale")),
        "X-Ray" => Some(("draw", "x-ray")),
        "XATTACH  Specify insertion point for \"%{name}\":" => Some(("insert", "xattach-specify-insertion-point-for-name")),
        "XATTACH: {e}" => Some(("common", "xattach-e")),
        "XDATA  [List / Clear]  (SET <app> <value> by typing):" => Some(("view", "xdata-list-clear-set-app-value-by-typing")),
        "XDATA: cleared." => Some(("view", "xdata-cleared")),
        "XDATA: select entities first." => Some(("view", "xdata-select-entities-first")),
        "XDATA: set [{app}] = \"{val}\" on {} entity/entities." => Some(("view", "xdata-set-app-val-on-entity-entities")),
        "XLINE  Specify a point:" => Some(("draw", "xline-specify-a-point")),
        "XLINE  Specify through point:" => Some(("draw", "xline-specify-through-point")),
        "XLine" => Some(("common", "xline")),
        "XOPEN: select an external reference (xref) to open." => Some(("insert", "xopen-select-an-external-reference-xref-to-ope")),
        "XREF  External references:" => Some(("insert", "xref-external-references")),
        "XREF  Loaded \"{}\"" => Some(("file", "xref-loaded")),
        "XREF  No external references in this drawing." => Some(("insert", "xref-no-external-references-in-this-drawing")),
        "XREF  Not found: \"{}\" ({})" => Some(("common", "xref-not-found")),
        "XREF  Reloaded \"{}\"" => Some(("insert", "xref-reloaded")),
        "XREF  Save the drawing first to resolve relative XREF paths." => Some(("insert", "xref-save-the-drawing-first-to-resolve-relativ")),
        "XREF  Unloaded (skipped): \"{}\"" => Some(("common", "xref-unloaded-skipped")),
        "XREF: \"{}\" set to Overlay." => Some(("insert", "xref-set-to-overlay")),
        "XREF: bound \"{}\"." => Some(("insert", "xref-bound")),
        "XREF: bound \"{}\" with {} unremapped style handles (see bind limitations)." => Some(("insert", "xref-bound-with-unremapped-handles")),
        "XREF: cannot bind nested reference '{}'. Bind it in its host drawing." => Some(("insert", "xref-cannot-bind-nested-reference")),
        "Unreferenced" => Some(("insert", "unreferenced")),
        "File References" => Some(("insert", "xref-file-references")),
        "Attach DWG" => Some(("insert", "xref-attach-dwg")),
        "Attach Image" => Some(("insert", "xref-attach-image")),
        "Attach..." => Some(("insert", "xref-attach-menu")),
        "Change Path Type" => Some(("insert", "xref-change-path-type")),
        "Find and Replace..." => Some(("insert", "xref-find-and-replace-menu")),
        "Display Width" => Some(("insert", "xref-display-width")),
        "Display Height" => Some(("insert", "xref-display-height")),
        "Change Path" => Some(("insert", "xref-change-path")),
        "Make Absolute" => Some(("insert", "xref-make-absolute")),
        "Make Relative" => Some(("insert", "xref-make-relative")),
        "Remove Path" => Some(("insert", "xref-remove-path")),
        "Select New Path" => Some(("insert", "xref-select-new-path")),
        "Select a single reference first." => Some(("insert", "xref-select-a-single-reference-first")),
        "Reload All References" => Some(("insert", "xref-reload-all-references")),
        "Opened" => Some(("insert", "xref-opened")),
        "Untitled" => Some(("insert", "xref-untitled")),
        "Unresolved" => Some(("insert", "xref-unresolved")),
        "Preview not available" => Some(("insert", "xref-preview-not-available")),
        "Reload All" => Some(("insert", "xref-reload-all")),
        "DWG" => Some(("insert", "xref-dwg")),
        "Pixel Width" => Some(("insert", "xref-pixel-width")),
        "Pixel Height" => Some(("insert", "xref-pixel-height")),
        "Resolution Unit" => Some(("insert", "xref-resolution-unit")),
        "XREF: cannot unload nested reference '{}'. Unload it in its host drawing." => Some(("insert", "xref-cannot-unload-nested-reference")),
        "XREF: cannot overlay nested reference '{}'. Overlay it in its host drawing." => Some(("insert", "xref-cannot-overlay-nested-reference")),
        "XREF: cannot reload nested reference '{}'. Reload it in its host drawing." => Some(("insert", "xref-cannot-reload-nested-reference")),
        "XREF: cannot attach nested reference '{}'. Attach it in its host drawing." => Some(("insert", "xref-cannot-attach-nested-reference")),
        "XREF: cannot set path type for nested reference '{}'. Set it in its host drawing." => Some(("insert", "xref-cannot-set-path-type-nested-reference")),
        "{}: reload applies to drawing references only." => Some(("insert", "reload-applies-to-drawing-references-only")),
        "XREF: \"{}\" set to Attach." => Some(("insert", "xref-set-to-attach")),
        "External References" => Some(("insert", "xref-manager-title")),
        "XATTACH: cannot attach the host drawing into itself." => Some(("insert", "xref-self-attach-blocked")),
        "XREF: cannot bind \"{}\": {}." => Some(("insert", "xref-cannot-bind")),
        "XREF: cannot detach nested reference '{}'. Detach it in its host drawing." => Some(("insert", "xref-cannot-detach-nested-reference")),
        "XREF: PDF bind (vector import) is not available in this version." => Some(("insert", "xref-pdf-bind-unavailable")),
        "XREF: cannot make path relative across drives." => Some(("insert", "xref-cannot-make-path-relative")),
        "XREF: detached \"{}\"." => Some(("insert", "xref-detached")),
        "XREF: no loaded reference with that key." => Some(("insert", "xref-no-loaded-reference-with-that-key")),
        "XREF: no references match '{}'." => Some(("insert", "xref-no-references-match")),
        "XREF: overlays apply to drawing references only." => Some(("insert", "xref-overlays-drawing-references-only")),
        "XREF: Path set for \"{}\" — Reload to apply." => Some(("insert", "xref-path-set-for")),
        "XREF: unloaded \"{}\"." => Some(("insert", "xref-unloaded")),
        "XREF: unknown option '{}'. Options: ? Reload Unload Detach Path Pathtype Bind Overlay Attach" => Some(("insert", "xref-unknown-option")),
        "XREF: updated {} reference(s)." => Some(("insert", "xref-updated-references")),
        "Usage: XREF Path <pattern> <new path>" => Some(("insert", "usage-xref-path-pattern")),
        "Usage: XREF Path Find <old> <new>" => Some(("insert", "usage-xref-path-find")),
        "Usage: XREF Pathtype <Full|Relative|None> [pattern]" => Some(("insert", "usage-xref-pathtype")),
        "{} reference(s) not found — open the reference manager with EXTERNALREFERENCES." => Some(("insert", "xref-missing-open-xrefman")),
        " (nested — not rendered)" => Some(("insert", "xref-nested-not-rendered")),
        "Change Path:" => Some(("insert", "change-path")),
        "Date" => Some(("insert", "date")),
        "Details" => Some(("insert", "details")),
        "Detach" => Some(("insert", "xref-detach")),
        "Failed" => Some(("insert", "failed")),
        "File attach is not available on web — the reference list below is read-only." => Some(("insert", "xref-file-attach-is-not-available-on-web")),
        "File name" => Some(("insert", "xref-file-name")),
        "Found At" => Some(("insert", "found-at")),
        "Help" => Some(("insert", "xref-help")),
        "Nested references are read-only — edit them in their host drawing." => Some(("insert", "xref-nested-references-are-read-only")),
        "Not found" => Some(("insert", "not-found")),
        "Orphaned" => Some(("insert", "orphaned")),
        "Overlay" => Some(("insert", "xref-overlay")),
        "Path:" => Some(("insert", "path")),
        "Reference Manager — select rows, then Detach, Unload, Reload, Bind, Overlay, or a Change Path mode." => Some(("insert", "xref-reference-manager-select-rows-bind")),
        "Bind" => Some(("insert", "xref-bind")),
        "Refresh" => Some(("insert", "xref-refresh")),
        "Relative" => Some(("insert", "relative")),
        "Reload" => Some(("insert", "xref-reload")),
        "Replace:" => Some(("insert", "xref-replace")),
        "Saved Path" => Some(("insert", "saved-path")),
        "Select a reference first." => Some(("insert", "xref-select-a-reference-first")),
        "Select a reference to inspect its details" => Some(("insert", "xref-select-a-reference-to-inspect-its")),
        "Set Path" => Some(("insert", "xref-set-path")),
        "Stale" => Some(("insert", "stale")),
        "Toggle list/tree" => Some(("insert", "toggle-list-tree")),
        "Tree" => Some(("insert", "tree")),
        "Type a new path first." => Some(("insert", "xref-type-a-new-path-first")),
        "Type the path prefix to find first." => Some(("insert", "xref-type-the-path-prefix-to-find-first")),
        "Unload" => Some(("insert", "xref-unload")),
        "Unloaded" => Some(("insert", "unloaded")),
        "new path for selection" => Some(("insert", "xref-new-path-for-selection")),
        "new path prefix" => Some(("insert", "xref-new-path-prefix")),
        "old path prefix" => Some(("insert", "xref-old-path-prefix")),
        "Y (mm)" => Some(("plot", "y-mm")),
        "Yards" => Some(("common", "yards")),
        "Yellow" => Some(("common", "yellow")),
        "Yes" => Some(("common", "yes")),
        "Yes, set as default" => Some(("modal", "yes-set-as-default")),
        "ZOOM  [Window / Extents / Extents All / All / In / Out / Scale]:" => Some(("view", "zoom-window-extents-extents-all-all-in-out-sca")),
        "ZOOM  scale factor (e.g. 2 or 0.5):" => Some(("annotate", "zoom-scale-factor-e-g-2-or-0-5")),
        "ZOOM WINDOW  Specify first corner:" => Some(("view", "zoom-window-specify-first-corner")),
        "ZOOM WINDOW  Specify opposite corner:" => Some(("view", "zoom-window-specify-opposite-corner")),
        "Zero" => Some(("properties", "zero")),
        "Zero suppress (DIMALTZ)" => Some(("common", "zero-suppress-dimaltz")),
        "Zero suppress (DIMZIN)" => Some(("common", "zero-suppress-dimzin")),
        "Zoom\nExtents" => Some(("view", "zoom-extents")),
        "Zoom All" => Some(("annotate", "zoom-all")),
        "Zoom Extents" => Some(("common", "zoom-extents")),
        "Zoom Extents — All Viewports" => Some(("annotate", "zoom-extents-all-viewports")),
        "Zoom In" => Some(("common", "zoom-in")),
        "Zoom Out" => Some(("common", "zoom-out")),
        "Zoom Scale ×{factor:.3}" => Some(("annotate", "zoom-scale-factor-3")),
        "Zoom Window" => Some(("common", "zoom-window")),
        "alias" => Some(("command", "alias-lowercase")),
        "big-font file…" => Some(("styles", "big-font-file")),
        "command" => Some(("common", "command-lowercase")),
        "e.g. Arial" => Some(("common", "e-g-arial")),
        "eXit" => Some(("modify", "exit")),
        "font file…" => Some(("styles", "font-file-picker-lowercase")),
        "has" => Some(("modal", "has")),
        "hold" => Some(("modal", "hold")),
        "linetype" => Some(("common", "linetype-lowercase")),
        "lineweight" => Some(("common", "lineweight-lowercase")),
        "no releases" => Some(("plugins", "no-releases")),
        "object" => Some(("common", "object-lowercase")),
        "objects" => Some(("modal", "objects")),
        "options" => Some(("common", "options-lowercase")),
        "that object" => Some(("modal", "that-object")),
        "those objects" => Some(("modal", "those-objects")),
        "units" => Some(("common", "units")),
        "{cmd}: cannot create folder ({e})." => Some(("file", "cmd-cannot-create-folder-e")),
        "{cmd}: no hatch objects." => Some(("view", "cmd-no-hatch-objects")),
        "{cmd}: no text or dimension objects." => Some(("view", "cmd-no-text-or-dimension-objects")),
        "{cmd}: not yet implemented." => Some(("view", "cmd-not-yet-implemented")),
        "{cmd}: packaged {copied} file(s) into {}" => Some(("file", "cmd-packaged-copied-file-s-into")),
        "{count} object(s) added to selection." => Some(("common", "count-object-s-added-to-selection")),
        "{count} object(s) pasted." => Some(("common", "count-object-s-pasted")),
        "{error}. External-change checks remain active." => Some(("file", "error-external-change-checks-remain-active")),
        "{exploded} object(s) exploded." => Some(("annotate", "exploded-object-s-exploded")),
        "{label}:" => Some(("command", "label")),
        "{label}: {count} {noun} created." => Some(("common", "label-count-noun-created")),
        "{n} object(s) erased." => Some(("draw", "n-object-s-erased")),
        "{prefix}: '{style_name}' font set to '{font}'." => Some(("layers", "prefix-style-name-font-set-to-font")),
        "{prefix}: '{style_name}' oblique angle set to {deg:.1}°." => Some(("layers", "prefix-style-name-oblique-angle-set-to-deg-1")),
        "{prefix}: '{style_name}' width factor set to {factor:.3}." => Some(("layers", "prefix-style-name-width-factor-set-to-factor-3")),
        "{prefix}: active style set to '{name}'." => Some(("layers", "prefix-active-style-set-to-name")),
        "{prefix}: style '{name}' already exists." => Some(("layers", "prefix-style-name-already-exists")),
        "{prefix}: style '{name}' created." => Some(("layers", "prefix-style-name-created")),
        "{prefix}: style '{name}' not found." => Some(("layers", "prefix-style-name-not-found")),
        "{prefix}: style '{style_name}' not found." => Some(("layers", "prefix-style-style-name-not-found")),
        "{type_name}  Handle:{:X}  Layer:{}  Color:{}  LT:{}{}" => Some(("inquiry", "type-name-handle-x-layer-color-lt")),
        "{warning}. External-change checks remain active." => Some(("file", "warning-external-change-checks-remain-active")),
        "{}  Area={:.4}  Perimeter={:.4}  Centroid=({:.4},{:.4})" => Some(("inquiry", "area-4-perimeter-4-centroid-4-4")),
        "{} = {v}" => Some(("styles", "v")),
        "{} acquired." => Some(("common", "acquired")),
        "{} alias(es) applied." => Some(("common", "alias-es-applied")),
        "{} group(s) dissolved." => Some(("common", "group-s-dissolved")),
        "{} layer(s) turned {}" => Some(("common", "layer-s-turned")),
        "{} layer(s) {}" => Some(("common", "layer-s")),
        "{} object(s) copied to clipboard (base {:.3},{:.3})." => Some(("insert", "object-s-copied-to-clipboard-base-3-3")),
        "{} object(s) copied to clipboard." => Some(("insert", "object-s-copied-to-clipboard")),
        "{} object(s) cut to clipboard." => Some(("insert", "object-s-cut-to-clipboard")),
        "{} viewport(s) in layout \"{}\":" => Some(("view", "viewport-s-in-layout")),
        "{}: expected 0 or 1." => Some(("styles", "expected-0-or-1")),
        "{}: expected a number, got \"{raw}\"" => Some(("command", "expected-a-number-got-raw")),
        "── %{MOD} Shortcuts ──────────────────────────────────────" => Some(("common", "mod-shortcuts")),
        "── Custom Overrides (SHORTCUTS SET) ──────────────────" => Some(("common", "custom-overrides-shortcuts-set")),
        "── Function Keys ──────────────────────────────────────" => Some(("common", "function-keys")),
        "── Other Keys ──────────────────────────────────────────" => Some(("common", "other-keys")),
        "Always keep text between extension lines" => Some(("dimstyle", "keep-text-between-extension-lines")),
        "Angular dimensions" => Some(("dimstyle", "angular-dimensions")),
        "Arc length symbol" => Some(("dimstyle", "arc-length-symbol")),
        "Arrowheads" => Some(("dimstyle", "arrowheads")),
        "Available style" => Some(("dimstyle", "available-style")),
        "Baseline spacing" => Some(("dimstyle", "baseline-spacing")),
        "Basic" => Some(("dimstyle", "basic")),
        "Both arrowheads" => Some(("dimstyle", "both-arrowheads")),
        "Center mark" => Some(("dimstyle", "center-mark")),
        "Center mark size" => Some(("dimstyle", "center-mark-size")),
        "Center marks" => Some(("dimstyle", "center-marks")),
        "Centerlines" => Some(("dimstyle", "centerlines")),
        "Compare with" => Some(("dimstyle", "compare-with")),
        "Current style" => Some(("dimstyle", "current-style")),
        "Deviation" => Some(("dimstyle", "deviation")),
        "Different sections" => Some(("dimstyle", "different-sections")),
        "Dimension line color" => Some(("dimstyle", "dimension-line-color")),
        "Dimension linetype" => Some(("dimstyle", "dimension-linetype")),
        "Dimension lineweight" => Some(("dimstyle", "dimension-lineweight")),
        "Display alternate units" => Some(("dimstyle", "display-alternate-units")),
        "Draw dimension line between extension lines" => Some(("dimstyle", "draw-dimension-line-between-extension-lines")),
        "Extend beyond dimension line" => Some(("dimstyle", "extend-beyond-dimension-line")),
        "Extend beyond ticks" => Some(("dimstyle", "extend-beyond-ticks")),
        "Extension line color" => Some(("dimstyle", "extension-line-color")),
        "Extension lineweight" => Some(("dimstyle", "extension-lineweight")),
        "Feet and inches" => Some(("dimstyle", "feet-and-inches")),
        "Fine tuning" => Some(("dimstyle", "fine-tuning")),
        "First arrowhead" => Some(("dimstyle", "first-arrowhead")),
        "First extension linetype" => Some(("dimstyle", "first-extension-linetype")),
        "Fit options" => Some(("dimstyle", "fit-options")),
        "Fixed length" => Some(("dimstyle", "fixed-length")),
        "Fraction format" => Some(("dimstyle", "fraction-format")),
        "Height scale" => Some(("dimstyle", "height-scale")),
        "Horizontal placement" => Some(("dimstyle", "horizontal-placement")),
        "Keep text horizontal when inside" => Some(("dimstyle", "keep-text-horizontal-inside")),
        "Keep text horizontal when outside" => Some(("dimstyle", "keep-text-horizontal-outside")),
        "Leader arrowhead" => Some(("dimstyle", "leader-arrowhead")),
        "Limits" => Some(("dimstyle", "limits")),
        "Linear dimensions" => Some(("dimstyle", "linear-dimensions")),
        "Lower value" => Some(("dimstyle", "lower-value")),
        "Measurement scale" => Some(("dimstyle", "measurement-scale")),
        "Measurement template" => Some(("dimstyle", "measurement-template")),
        "Method" => Some(("dimstyle", "method")),
        "Multiplier" => Some(("dimstyle", "multiplier")),
        "No differences" => Some(("dimstyle", "no-differences")),
        "Not applicable" => Some(("dimstyle", "not-applicable")),
        "Offset from measured point" => Some(("dimstyle", "offset-from-measured-point")),
        "Place text manually while creating dimensions" => Some(("dimstyle", "place-text-manually")),
        "Radius jog angle (°)" => Some(("dimstyle", "radius-jog-angle")),
        "Read left to right" => Some(("dimstyle", "read-left-to-right")),
        "Referenced style · Read only" => Some(("dimstyle", "referenced-read-only")),
        "Round off" => Some(("dimstyle", "round-off")),
        "Second arrowhead" => Some(("dimstyle", "second-arrowhead")),
        "Second extension linetype" => Some(("dimstyle", "second-extension-linetype")),
        "Show zero feet and zero inches" => Some(("dimstyle", "show-zero-feet-and-inches")),
        "Show zero feet; suppress zero inches" => Some(("dimstyle", "show-zero-feet-suppress-zero-inches")),
        "Suppress arrows when they do not fit" => Some(("dimstyle", "suppress-arrows-when-no-fit")),
        "Suppress first dimension line" => Some(("dimstyle", "suppress-first-dimension-line")),
        "Suppress first extension line" => Some(("dimstyle", "suppress-first-extension-line")),
        "Suppress second dimension line" => Some(("dimstyle", "suppress-second-dimension-line")),
        "Suppress second extension line" => Some(("dimstyle", "suppress-second-extension-line")),
        "Suppress zero feet and zero inches" => Some(("dimstyle", "suppress-zero-feet-and-inches")),
        "Suppress zero feet; show zero inches" => Some(("dimstyle", "suppress-zero-feet-show-zero-inches")),
        "Surveyor's units" => Some(("dimstyle", "surveyors-units")),
        "Symbols and Arrows" => Some(("dimstyle", "symbols-and-arrows")),
        "Symmetrical" => Some(("dimstyle", "symmetrical")),
        "Text background" => Some(("dimstyle", "text-background")),
        "Text gap" => Some(("dimstyle", "text-gap")),
        "The selected text style fixes the height at %{height}." => Some(("dimstyle", "fixed-text-height-note")),
        "Tick size" => Some(("dimstyle", "tick-size")),
        "Tolerance zero suppression" => Some(("dimstyle", "tolerance-zero-suppression")),
        "Unit format" => Some(("dimstyle", "unit-format")),
        "Upper value" => Some(("dimstyle", "upper-value")),
        "Use <> as the measured value; text before and after it becomes the prefix and suffix." => Some(("dimstyle", "measurement-template-help")),
        "Use different first and second arrowheads" => Some(("dimstyle", "use-different-arrowheads")),
        "Use fixed-length extension lines" => Some(("dimstyle", "use-fixed-length-extension-lines")),
        "Used in drawing" => Some(("dimstyle", "used-in-drawing")),
        "Vertical offset" => Some(("dimstyle", "vertical-offset")),
        "Vertical placement" => Some(("dimstyle", "vertical-placement")),
        "Vertical position" => Some(("dimstyle", "vertical-position")),
        "When space is limited" => Some(("dimstyle", "when-space-is-limited")),
        "When text is moved" => Some(("dimstyle", "when-text-is-moved")),
        "Zero suppression" => Some(("dimstyle", "zero-suppression")),
        "Add a leader" => Some(("dimstyle", "add-a-leader")),
        "Automatic" => Some(("dimstyle", "automatic")),
        "By block" => Some(("dimstyle", "by-block")),
        "Comma" => Some(("dimstyle", "comma")),
        "Degrees, minutes, seconds" => Some(("dimstyle", "degrees-minutes-seconds")),
        "Keep dimension line with text" => Some(("dimstyle", "keep-dimension-line-with-text")),
        "Leading and trailing" => Some(("dimstyle", "leading-and-trailing")),
        "Move arrows outside first" => Some(("dimstyle", "move-arrows-outside-first")),
        "Move text and arrows outside" => Some(("dimstyle", "move-text-and-arrows-outside")),
        "Move text freely" => Some(("dimstyle", "move-text-freely")),
        "Move text outside first" => Some(("dimstyle", "move-text-outside-first")),
        "Period" => Some(("dimstyle", "period")),
        "Space" => Some(("dimstyle", "space")),
        "Alignment spacing" => Some(("style-manager", "alignment-spacing")),
        "Always left align" => Some(("style-manager", "always-left-align")),
        "Attachment direction" => Some(("style-manager", "attachment-direction")),
        "Background fill enabled" => Some(("style-manager", "background-fill-enabled")),
        "Big font" => Some(("style-manager", "big-font")),
        "Block scale X" => Some(("style-manager", "block-scale-x")),
        "Block scale Y" => Some(("style-manager", "block-scale-y")),
        "Block scale Z" => Some(("style-manager", "block-scale-z")),
        "Borders" => Some(("style-manager", "borders")),
        "Bottom attachment" => Some(("style-manager", "bottom-attachment")),
        "Break gap size" => Some(("style-manager", "break-gap-size")),
        "Caps and Fill" => Some(("style-manager", "caps-and-fill")),
        "Content type" => Some(("style-manager", "content-type")),
        "Data Row" => Some(("style-manager", "data-row")),
        "Data type" => Some(("style-manager", "data-type")),
        "Default text" => Some(("style-manager", "default-text")),
        "Different" => Some(("style-manager", "different")),
        "Display joints" => Some(("style-manager", "display-joints")),
        "Drawing height" => Some(("style-manager", "drawing-height")),
        "Drawing scale" => Some(("style-manager", "drawing-scale")),
        "Effects" => Some(("style-manager", "effects")),
        "Elements" => Some(("style-manager", "elements")),
        "End caps" => Some(("style-manager", "end-caps")),
        "Fill and joints" => Some(("style-manager", "fill-and-joints")),
        "Fill enabled" => Some(("style-manager", "fill-enabled")),
        "First segment angle" => Some(("style-manager", "first-segment-angle")),
        "Fixed height" => Some(("style-manager", "fixed-height")),
        "Flow direction" => Some(("style-manager", "flow-direction")),
        "Font file" => Some(("style-manager", "font-file")),
        "Fonts" => Some(("style-manager", "fonts")),
        "Format string" => Some(("style-manager", "format-string")),
        "Header" => Some(("style-manager", "header")),
        "Header Row" => Some(("style-manager", "header-row")),
        "Horizontal margin" => Some(("style-manager", "horizontal-margin")),
        "Inner arcs" => Some(("style-manager", "inner-arcs")),
        "Inside horizontal" => Some(("style-manager", "inside-horizontal")),
        "Inside vertical" => Some(("style-manager", "inside-vertical")),
        "Leader draw order" => Some(("style-manager", "leader-draw-order")),
        "Leader note" => Some(("style-manager", "leader-note")),
        "Left attachment" => Some(("style-manager", "left-attachment")),
        "Line color" => Some(("style-manager", "line-color")),
        "Line type" => Some(("style-manager", "line-type")),
        "Line weight" => Some(("style-manager", "line-weight")),
        "Maximum leader points" => Some(("style-manager", "maximum-leader-points")),
        "Multileader draw order" => Some(("style-manager", "multileader-draw-order")),
        "No preview" => Some(("style-manager", "no-preview")),
        "Oblique angle" => Some(("style-manager", "oblique-angle")),
        "Outer arc" => Some(("style-manager", "outer-arc")),
        "Paper height" => Some(("style-manager", "paper-height")),
        "Paper text height" => Some(("style-manager", "paper-text-height")),
        "Path type" => Some(("style-manager", "path-type")),
        "Right attachment" => Some(("style-manager", "right-attachment")),
        "Scale factor" => Some(("style-manager", "scale-factor")),
        "Second segment angle" => Some(("style-manager", "second-segment-angle")),
        "Size and Effects" => Some(("style-manager", "size-and-effects")),
        "Start caps" => Some(("style-manager", "start-caps")),
        "Stroke fonts" => Some(("style-manager", "stroke-fonts")),
        "Suppress header row" => Some(("style-manager", "suppress-header-row")),
        "Suppress title row" => Some(("style-manager", "suppress-title-row")),
        "System font" => Some(("style-manager", "system-font")),
        "System fonts" => Some(("style-manager", "system-fonts")),
        "Text alignment" => Some(("style-manager", "text-alignment")),
        "Text angle" => Some(("style-manager", "text-angle")),
        "Title Row" => Some(("style-manager", "title-row")),
        "Top attachment" => Some(("style-manager", "top-attachment")),
        "Unit type" => Some(("style-manager", "unit-type")),
        "Vertical margin" => Some(("style-manager", "vertical-margin")),
        "font family…" => Some(("style-manager", "font-family-placeholder")),
        "Bottom to top" => Some(("style-manager", "bottom-to-top")),
        "Arrowhead first" => Some(("style-manager", "arrowhead-first")),
        "Content first" => Some(("style-manager", "content-first")),
        "Leader first" => Some(("style-manager", "leader-first")),
        "Straight" => Some(("style-manager", "straight")),
        "Parallel to last segment" => Some(("style-manager", "parallel-last-segment")),
        "Top of top line" => Some(("style-manager", "top-of-top-line")),
        "Middle of top line" => Some(("style-manager", "middle-of-top-line")),
        "Middle of text" => Some(("style-manager", "middle-of-text")),
        "Middle of bottom line" => Some(("style-manager", "middle-of-bottom-line")),
        "Bottom of bottom line" => Some(("style-manager", "bottom-of-bottom-line")),
        "Bottom line" => Some(("style-manager", "bottom-line")),
        "Underline bottom line" => Some(("style-manager", "underline-bottom-line")),
        "Underline top line" => Some(("style-manager", "underline-top-line")),
        "Underline all text" => Some(("style-manager", "underline-all-text")),
        "Center of text" => Some(("style-manager", "center-of-text")),
        "Center of text with overline" => Some(("style-manager", "center-of-text-overline")),
        "Block extents" => Some(("style-manager", "block-extents")),
        "Base point" => Some(("style-manager", "base-point")),
        "Crossing: specify first corner." => Some(("common", "crossing-specify-first-corner")),
        "Window: specify first corner." => Some(("common", "window-specify-first-corner")),
        "Add mode: picks join the selection." => Some(("common", "add-mode-picks-join-the-selection")),
        "Remove mode: picks leave the selection." => Some(("common", "remove-mode-picks-leave-the-selection")),
        "No editable objects selected." => Some(("common", "no-editable-objects-selected")),
        "{count} object(s) found." => Some(("common", "object-s-found")),
        "The cell is content locked." => Some(("common", "the-cell-is-content-locked")),
        "No editable table cell picked." => Some(("common", "no-editable-table-cell-picked")),
        "EXTRUDE: path entity not found." => Some(("common", "extrude-path-entity-not-found")),
        "EXTRUDE: created %{created} object(s); %{failed} source(s) could not be extruded." => Some(("common", "extrude-created-object-s-source-s-could-not-be-extruded")),
        "EXTRUDE: no selected object could be extruded with the requested options." => Some(("common", "extrude-no-selected-object-could-be-extruded-with-the-requested-options")),
        "SWEEP: created {created} object(s); {failed} source(s) could not be swept." => Some(("common", "sweep-created-object-s-source-s-could-not-be-swept")),
        "SWEEP: could not sweep the profile along the path." => Some(("common", "sweep-could-not-sweep-the-profile-along-the-path")),
        "LOFT could not create a complete display. The source sections were preserved." => Some(("common", "loft-could-not-create-a-complete-display-the-source-sections-were-preserved")),
        "LOFT: surface created." => Some(("common", "loft-surface-created")),
        "LOFT: solid created." => Some(("common", "loft-solid-created")),
        "ATTSYNC: no editable block references." => Some(("common", "attsync-no-editable-block-references")),
        "XREF  Reloaded with repairs: \"{}\"" => Some(("common", "xref-reloaded-with-repairs")),
        "XREF  Reload failed: \"{}\" ({})" => Some(("common", "xref-reload-failed")),
        "Zoom Previous" => Some(("common", "zoom-previous")),
        "ZOOM: no previous view." => Some(("common", "zoom-no-previous-view")),
        "Zoom Object" => Some(("common", "zoom-object")),
        "ZOOM: selected objects have no visible bounds." => Some(("common", "zoom-selected-objects-have-no-visible-bounds")),
        "ZOOM Dynamic: drag horizontally to pan and vertically to zoom. Press Esc to exit." => Some(("common", "zoom-dynamic-drag-horizontally-to-pan-and-vertically-to-zoom-press-esc-to-exit")),
        "REDRAW: viewport refreshed." => Some(("common", "redraw-viewport-refreshed")),
        "REDRAWALL: viewports refreshed." => Some(("common", "redrawall-viewports-refreshed")),
        "REGEN: regenerated model." => Some(("common", "regen-regenerated-model")),
        "ISOPLANE: expected Left, Top, or Right." => Some(("common", "isoplane-expected-left-top-or-right")),
        "ISODRAFT: expected On or Off." => Some(("common", "isodraft-expected-on-or-off")),
        "XDATA: selected entities are on locked layers." => Some(("common", "xdata-selected-entities-are-on-locked-layers")),
        "ADJUST: no raster images selected, or unknown property (use BRIGHTNESS|CONTRAST|FADE)." => Some(("common", "adjust-no-raster-images-selected-or-unknown-property-use-brightness-contrast-fade")),
        "ANNOAUTOSCALE: enter an integer from -4 through 4." => Some(("common", "annoautoscale-enter-an-integer-from-4-through-4")),
        "Usage: DATALINK <path-to-.csv>" => Some(("common", "usage-datalink-path-to-csv")),
        "DATALINKUPDATE: no linked tables found." => Some(("common", "datalinkupdate-no-linked-tables-found")),
        "DATALINKUPDATE: wrote {} linked source(s)." => Some(("common", "datalinkupdate-wrote-linked-source-s")),
        "DATALINKUPDATE: linked sources could not be read." => Some(("common", "datalinkupdate-linked-sources-could-not-be-read")),
        "DATALINKUPDATE: updated {} linked table(s)." => Some(("common", "datalinkupdate-updated-linked-table-s")),
        "Usage: LANDXMLIMPORT <path-to-.xml>  (imports CgPoint survey points)" => Some(("common", "usage-landxmlimport-path-to-xml-imports-cgpoint-survey-points")),
        "CENTERRESET: {count} center object(s) updated." => Some(("common", "centerreset-center-object-s-updated")),
        "CENTERREASSOCIATE: {count} center object(s) associated." => Some(("common", "centerreassociate-center-object-s-associated")),
        "CENTERDISASSOCIATE: {count} center object(s) detached." => Some(("common", "centerdisassociate-center-object-s-detached")),
        "; {skipped} need SAVEAS (no file path yet)" => Some(("common", "need-saveas-no-file-path-yet")),
        "Model space background set to Match Theme." => Some(("common", "model-space-background-set-to-match-theme")),
        "Model space background set to Classic CAD Dark." => Some(("common", "model-space-background-set-to-classic-cad-dark")),
        "Paper desk surround background reset to default." => Some(("common", "paper-desk-surround-background-reset-to-default")),
        "Desk surround background: rgb({}, {}, {})" => Some(("common", "desk-surround-background-rgb")),
        "Usage: BACKGROUND DESK <r> <g> <b> | DEFAULT" => Some(("common", "usage-background-desk-r-g-b-default")),
        "Usage: BACKGROUND <r> <g> <b> (0–255) | THEME|CLASSIC|DEFAULT|DESK|BLACK|DARKGRAY|GRAY|LIGHTGRAY|WHITE" => Some(("common", "usage-background-r-g-b-0-255-theme-classic-default-desk-black-darkgray-gray-lightgray")),
        "FLATTEN: {} entity(ies) moved to Z=0; {} unchanged or unsupported." => Some(("common", "flatten-entity-ies-moved-to-z-0-unchanged-or-unsupported")),
        "UCS aligned to the current view." => Some(("common", "ucs-aligned-to-the-current-view")),
        "UCS defined from three points." => Some(("common", "ucs-defined-from-three-points")),
        "UCS points must define two non-collinear axes." => Some(("common", "ucs-points-must-define-two-non-collinear-axes")),
        "UCS requires origin, X-axis point and XY-plane point." => Some(("common", "ucs-requires-origin-x-axis-point-and-xy-plane-point")),
        "DWGUNITS  current unit: {current}" => Some(("common", "dwgunits-current-unit")),
        "LAYTRANS: {why}." => Some(("common", "laytrans")),
        "LAYTRANS: no layer names in common — use LAYTRANS with no file to map them." => Some(("common", "laytrans-no-layer-names-in-common-use-laytrans-with-no-file-to-map-them")),
        "DWGUNITS: not a unit this drawing can use." => Some(("common", "dwgunits-not-a-unit-this-drawing-can-use")),
        "DWGUNITS: already in {label}." => Some(("common", "dwgunits-already-in")),
        "DWGUNITS: now {to_label}. Nothing was converted — {from_label} has no size to convert from." => Some(("common", "dwgunits-now-nothing-was-converted-has-no-size-to-convert-from")),
        "DWGUNITS: {from_label} to {to_label} — {moved} object(s) scaled by {factor}, {reframed} viewport(s) reframed." => Some(("common", "dwgunits-to-object-s-scaled-by-viewport-s-reframed")),
        "LAYTRANS: saved {n} mapping(s)." => Some(("common", "laytrans-saved-mapping-s")),
        "LAYTRANS: could not save — {why}." => Some(("common", "laytrans-could-not-save")),
        "LAYTRANS: could not read — {why}." => Some(("common", "laytrans-could-not-read")),
        "LAYTRANS: loaded {count} mapping(s)." => Some(("common", "laytrans-loaded-mapping-s")),
        "LAYTRANS: log written to {}." => Some(("common", "laytrans-log-written-to")),
        "LAYTRANS: could not write log — {why}." => Some(("common", "laytrans-could-not-write-log")),
        "LAYTRANS: skipped \"{layer}\" — {reason}." => Some(("common", "laytrans-skipped")),
        "LAYTRANS: translated {layers} layer(s), {objects} object(s)." => Some(("common", "laytrans-translated-layer-s-object-s")),
        "{name} = {mode}" => Some(("styles", "v")),
        "{name}: expected an integer from 0 to {maximum}." => Some(("common", "expected-an-integer-from-0-to")),
        "DIMCONTINUEMODE = {mode}" => Some(("common", "dimcontinuemode")),
        "{name} = {number}" => Some(("styles", "v")),
        "LTSCALE = {current:.4}" => Some(("styles", "ltscale-v-4")),
        "Current color scheme: <{}>" => Some(("common", "current-color-scheme")),
        "VPORTS: unlock existing viewport layers first." => Some(("common", "vports-unlock-existing-viewport-layers-first")),
        "DRAWORDER: moved {} entities to back." => Some(("common", "draworder-moved-entities-to-back")),
        "DRAWORDER  select objects, then press Enter:" => Some(("common", "draworder-select-objects-then-press-enter")),
        "DRAWORDER  [Above / Under / Front / Back] <Back>:" => Some(("common", "draworder-above-under-front-back-back")),
        "The solid could not be encoded as ACIS." => Some(("common", "the-solid-could-not-be-encoded-as-acis")),
        "The surface could not be encoded as ACIS." => Some(("common", "the-surface-could-not-be-encoded-as-acis")),
        "The result could not be encoded as ACIS." => Some(("common", "the-result-could-not-be-encoded-as-acis")),
        "The result could not be displayed completely. The original solid was retained." => Some(("common", "the-result-could-not-be-displayed-completely-the-original-solid-was-retained")),
        "The solid could not be updated." => Some(("common", "the-solid-could-not-be-updated")),
        "Select a 3D solid edge." => Some(("common", "select-a-3d-solid-edge")),
        "The solid geometry could not be restored." => Some(("common", "the-solid-geometry-could-not-be-restored")),
        "Select a solid edge." => Some(("common", "select-a-solid-edge")),
        "Edge operation failed. Use a convex planar solid and a smaller value." => Some(("common", "edge-operation-failed-use-a-convex-planar-solid-and-a-smaller-value")),
        "{label}: solid updated." => Some(("common", "solid-updated")),
        "Boolean: select at least two solids." => Some(("common", "boolean-select-at-least-two-solids")),
        "Boolean failed while combining the selected solids." => Some(("common", "boolean-failed-while-combining-the-selected-solids")),
        "The boolean result could not be encoded as ACIS." => Some(("common", "the-boolean-result-could-not-be-encoded-as-acis")),
        "SUBTRACT: select at least one base solid and one cutter solid." => Some(("common", "subtract-select-at-least-one-base-solid-and-one-cutter-solid")),
        "SUBTRACT failed while combining the base solids." => Some(("common", "subtract-failed-while-combining-the-base-solids")),
        "SUBTRACT failed while removing the selected solids." => Some(("common", "subtract-failed-while-removing-the-selected-solids")),
        "3DROTATE: could not turn the solid." => Some(("common", "value-3drotate-could-not-turn-the-solid")),
        "3DMIRROR: could not mirror the solid." => Some(("common", "value-3dmirror-could-not-mirror-the-solid")),
        "3DALIGN: could not align the solid." => Some(("common", "value-3dalign-could-not-align-the-solid")),
        "PRESSPULL: {count} object(s) updated." => Some(("common", "presspull-object-s-updated")),
        "Model text height" => Some(("properties", "model-text-height")),
        "INSERT unit scale is outside the supported range." => Some(("properties", "insert-unit-scale-is-outside-the-supported-range")),
        "Incomplete shortcut row discarded." => Some(("common", "incomplete-shortcut-row-discarded")),
        "Duplicate shortcut(s) ignored on Apply: {}" => Some(("common", "duplicate-shortcut-s-ignored-on-apply")),
        "{} shortcut(s) applied." => Some(("common", "shortcut-s-applied")),
        "Expected Cartesian, polar, cylindrical or spherical coordinates, or a number; got: \"{text}\"" => Some(("common", "expected-cartesian-polar-cylindrical-or-spherical-coordinates-or-a-number-got")),
        "Specify point or enter distance:" => Some(("common", "specify-point-or-enter-distance")),
        "Unknown visual style \"{name}\"." => Some(("common", "unknown-visual-style")),
        "All Files" => Some(("common", "all-files")),
        "Select Drawing to Insert as Block" => Some(("common", "select-drawing-to-insert-as-block")),
        "DWG/DXF Files" => Some(("common", "dwg-dxf-files")),
        "Inserting \"{name}\" from file." => Some(("common", "inserting-from-file")),
        "INSERT FILE: {e}" => Some(("common", "insert-file")),
        "XREF  Recovered with warnings: \"{}\"" => Some(("common", "xref-recovered-with-warnings")),
        "XREF  Recovery failed: \"{}\" ({})" => Some(("common", "xref-recovery-failed")),
        "Select at least one layout." => Some(("common", "select-at-least-one-layout")),
        "Printing is not available in the web version." => Some(("common", "printing-is-not-available-in-the-web-version")),
        "Sending selected layouts to the system printer…" => Some(("common", "sending-selected-layouts-to-the-system-printer")),
        "Save Plot Style Table" => Some(("common", "save-plot-style-table")),
        "Plot Style Files" => Some(("common", "plot-style-files")),
        "Font load failed ({script:?}): {error}" => Some(("common", "font-load-failed-script-e")),
        "Opened drawing, but recent copy could not be stored: {error}" => Some(("common", "opened-drawing-but-recent-copy-could-not-be-stored")),
        "Select PDF Underlay" => Some(("common", "select-pdf-underlay")),
        "PDF Files" => Some(("common", "pdf-files")),
        "PDFATTACH: {e}" => Some(("common", "pdfattach")),
        "Select External Reference File" => Some(("common", "select-external-reference-file")),
        "CAD Files" => Some(("common", "cad-files")),
        "DWG Files" => Some(("common", "dwg-files")),
        "DXF Files" => Some(("common", "dxf-files")),
        "Backup Files" => Some(("common", "backup-files")),
        "Save Block As" => Some(("common", "save-block-as")),
        "Save Data Extraction" => Some(("common", "save-data-extraction")),
        "Enter a valid cell range such as A1:D10." => Some(("common", "enter-a-valid-cell-range-such-as-a1-d10")),
        "Named ranges require a spreadsheet file." => Some(("common", "named-ranges-require-a-spreadsheet-file")),
        "Select a named range." => Some(("common", "select-a-named-range")),
        "The named range was not found." => Some(("common", "the-named-range-was-not-found")),
        "The named range does not refer to a worksheet cell range." => Some(("common", "the-named-range-does-not-refer-to-a-worksheet-cell-range")),
        "The spreadsheet contains no worksheets." => Some(("common", "the-spreadsheet-contains-no-worksheets")),
        "The selected data source is empty." => Some(("common", "the-selected-data-source-is-empty")),
        "The data link no longer exists." => Some(("common", "the-data-link-no-longer-exists")),
        "Writing to this data link is disabled." => Some(("common", "writing-to-this-data-link-is-disabled")),
        "Writing linked data is supported for CSV and text sources." => Some(("common", "writing-linked-data-is-supported-for-csv-and-text-sources")),
        "Data source not found: %{path}" => Some(("common", "data-source-not-found")),
        "Select at least one property." => Some(("common", "select-at-least-one-property")),
        "Select a data link." => Some(("common", "select-a-data-link")),
        "The selected data link no longer exists." => Some(("common", "the-selected-data-link-no-longer-exists")),
        "Columns, rows, width, and height must be positive values." => Some(("common", "columns-rows-width-and-height-must-be-positive-values")),
        "Choose a Spreadsheet File" => Some(("common", "choose-a-spreadsheet-file")),
        "Spreadsheet Files" => Some(("common", "spreadsheet-files")),
        "Enter a data link name." => Some(("common", "enter-a-data-link-name")),
        "A data link with that name already exists." => Some(("common", "a-data-link-with-that-name-already-exists")),
        "Data link deleted; existing table values were retained." => Some(("common", "data-link-deleted-existing-table-values-were-retained")),
        "No objects were selected when the wizard opened." => Some(("common", "no-objects-were-selected-when-the-wizard-opened")),
        "Add a drawing or include the current drawing." => Some(("common", "add-a-drawing-or-include-the-current-drawing")),
        "No extractable objects were found in the selected source." => Some(("common", "no-extractable-objects-were-found-in-the-selected-source")),
        "Select at least one object type." => Some(("common", "select-at-least-one-object-type")),
        "Choose at least one output." => Some(("common", "choose-at-least-one-output")),
        "Data Extraction Settings" => Some(("common", "data-extraction-settings")),
        "Add Drawings" => Some(("common", "add-drawings")),
        "CSV" => Some(("common", "csv")),
        "Export STL" => Some(("common", "export-stl")),
        "STL Files" => Some(("common", "stl-files")),
        "Export STEP AP203" => Some(("common", "export-step-ap203")),
        "STEP Files" => Some(("common", "step-files")),
        "Import OBJ Mesh" => Some(("common", "import-obj-mesh")),
        "Wavefront OBJ" => Some(("common", "wavefront-obj")),
        "{} layer(s) set to {}" => Some(("common", "layer-s-set-to")),
        "Isometric plane: {}." => Some(("common", "isometric-plane")),
        "Drafting rotation reset to World at 0°." => Some(("common", "drafting-rotation-reset-to-world-at-0")),
        "Length format is now {label}." => Some(("common", "length-format-is-now")),
        "Drawing unit is now {label}. Geometry unchanged — use DWGUNITS to convert it." => Some(("common", "drawing-unit-is-now-geometry-unchanged-use-dwgunits-to-convert-it")),
        "No objects are available in this scope." => Some(("common", "no-objects-are-available-in-this-scope")),
        "This operator requires a numeric property." => Some(("common", "this-operator-requires-a-numeric-property")),
        "Enter a valid number." => Some(("common", "enter-a-valid-number")),
        "Choose a value." => Some(("common", "choose-a-value")),
        "Registered as a .dwg/.dxf handler." => Some(("common", "registered-as-a-dwg-dxf-handler")),
        "No longer registered as a file handler." => Some(("common", "no-longer-registered-as-a-file-handler")),
        "File association failed: {why}" => Some(("common", "file-association-failed")),
        "Recovery cancelled: \"{}\"" => Some(("common", "recovery-cancelled")),
        "Could not show recovery log: {error}" => Some(("common", "could-not-show-recovery-log")),
        "PDF export is not available in the web version." => Some(("common", "pdf-export-is-not-available-in-the-web-version")),
        "Save error: {error}" => Some(("common", "save-error-e")),
        "The edited shape could not be displayed; the original geometry was restored." => Some(("common", "the-edited-shape-could-not-be-displayed-the-original-geometry-was-restored")),
        "No samples yet" => Some(("common", "no-samples-yet")),
        "Select Color" => Some(("common", "select-color")),
        "Layer Translator" => Some(("common", "layer-translator")),
        "Geometric Tolerance" => Some(("common", "geometric-tolerance")),
        "Drafting Settings" => Some(("common", "drafting-settings")),
        "Print All" => Some(("common", "print-all")),
        "Close Text Editor" => Some(("common", "close-text-editor")),
        "Scope" => Some(("common", "scope")),
        "Apply to:" => Some(("common", "apply-to")),
        "{} candidate object(s)" => Some(("common", "candidate-object-s")),
        "Filter" => Some(("common", "filter")),
        "Result" => Some(("common", "result")),
        "Include matching objects" => Some(("common", "include-matching-objects")),
        "Exclude matching objects" => Some(("common", "exclude-matching-objects")),
        "Append result to current selection" => Some(("common", "append-result-to-current-selection")),
        "Open CAD Studio — 2D/3D CAD editor" => Some(("common", "open-cad-studio-2d-3d-cad-editor")),
        "CAD files to open at startup (.dwg / .dxf)." => Some(("common", "cad-files-to-open-at-startup-dwg-dxf")),
        "Start with a new empty drawing." => Some(("common", "start-with-a-new-empty-drawing")),
        "Start a new editor process." => Some(("common", "start-a-new-editor-process")),
        "Open read-only: saving is disabled." => Some(("common", "open-read-only-saving-is-disabled")),
        "GPU backend (dx12, vulkan, gl, metal). Sets WGPU_BACKEND." => Some(("common", "gpu-backend-dx12-vulkan-gl-metal-sets-wgpu-backend")),
        "GPU unavailable — rendering in software on the CPU ({adapter}). Large drawings will navigate slowly; check the graphics driver (a driver update without a reboot is the usual cause)." => Some(("common", "gpu-unavailable-rendering-in-software-on-the-cpu")),
        "Safe mode: use the GL backend." => Some(("common", "safe-mode-use-the-gl-backend")),
        "Use the renderer for GPUs without shader storage buffers." => Some(("common", "use-the-renderer-for-gpus-without-shader-storage-buffers")),
        "Run the headless JSON automation server (stdin/stdout, or --port)." => Some(("common", "run-the-headless-json-automation-server-stdin-stdout-or-port")),
        "Connect AI clients to the running editor over MCP stdio." => Some(("common", "connect-ai-clients-to-the-running-editor-over-mcp-stdio")),
        "TCP port for --serve (defaults to stdin/stdout)." => Some(("common", "tcp-port-for-serve-defaults-to-stdin-stdout")),
        "Convert IN to OUT using the output file extension, then exit." => Some(("common", "convert-in-to-out-using-the-output-file-extension-then-exit")),
        "Run a command script at startup, one command per line." => Some(("common", "run-a-command-script-at-startup-one-command-per-line")),
        "Log level (error|warn|info|debug|trace). Also reads RUST_LOG." => Some(("common", "log-level-error-warn-info-debug-trace-also-reads-rust-log")),
        "Dim line angle" => Some(("common", "dim-line-angle")),
        "Extension line angle" => Some(("common", "extension-line-angle")),
        "Arrow 1" => Some(("common", "arrow-1")),
        "Arrow 2" => Some(("common", "arrow-2")),
        "Dim line linetype" => Some(("common", "dim-line-linetype")),
        "Ext line 1 linetype" => Some(("common", "ext-line-1-linetype")),
        "Ext line 2 linetype" => Some(("common", "ext-line-2-linetype")),
        "Fractional type" => Some(("common", "fractional-type")),
        "Text position X" => Some(("common", "text-position-x")),
        "Text position Y" => Some(("common", "text-position-y")),
        "Text rotation" => Some(("common", "text-rotation")),
        "Text view direction" => Some(("common", "text-view-direction")),
        "Text override" => Some(("common", "text-override")),
        "Dim prefix" => Some(("common", "dim-prefix")),
        "Dim suffix" => Some(("common", "dim-suffix")),
        "Dim sub-units suffix" => Some(("common", "dim-sub-units-suffix")),
        "Dim sub-units scale" => Some(("common", "dim-sub-units-scale")),
        "Suppress zero feet" => Some(("common", "suppress-zero-feet")),
        "Suppress zero inches" => Some(("common", "suppress-zero-inches")),
        "Alt sub-units scale" => Some(("common", "alt-sub-units-scale")),
        "Alt round" => Some(("common", "alt-round")),
        "Alt prefix" => Some(("common", "alt-prefix")),
        "Alt suffix" => Some(("common", "alt-suffix")),
        "Alt sub-units suffix" => Some(("common", "alt-sub-units-suffix")),
        "Alt suppress zero feet" => Some(("common", "alt-suppress-zero-feet")),
        "Alt suppress zero inches" => Some(("common", "alt-suppress-zero-inches")),
        "Tolerance alignment" => Some(("common", "tolerance-alignment")),
        "Tolerance suppress zero feet" => Some(("common", "tolerance-suppress-zero-feet")),
        "Tolerance suppress zero inches" => Some(("common", "tolerance-suppress-zero-inches")),
        "Alt tolerance precision" => Some(("common", "alt-tolerance-precision")),
        "Alt tolerance suppress leading zeros" => Some(("common", "alt-tolerance-suppress-leading-zeros")),
        "Alt tolerance suppress trailing zeros" => Some(("common", "alt-tolerance-suppress-trailing-zeros")),
        "Alt tolerance suppress zero feet" => Some(("common", "alt-tolerance-suppress-zero-feet")),
        "Alt tolerance suppress zero inches" => Some(("common", "alt-tolerance-suppress-zero-inches")),
        "Center location override X" => Some(("common", "center-location-override-x")),
        "Center location override Y" => Some(("common", "center-location-override-y")),
        "Jog location X" => Some(("common", "jog-location-x")),
        "Jog location Y" => Some(("common", "jog-location-y")),
        "Jog angle" => Some(("common", "jog-angle")),
        "Dim line" => Some(("common", "dim-line")),
        "Ext line" => Some(("common", "ext-line")),
        "Ext line weight" => Some(("common", "ext-line-weight")),
        "Ext line type" => Some(("common", "ext-line-type")),
        "Color mode" => Some(("common", "color-mode")),
        "Tint/Shade" => Some(("common", "tint-shade")),
        "Turn Height" => Some(("common", "turn-height")),
        "CCW" => Some(("common", "ccw")),
        "CW" => Some(("common", "cw")),
        "Total length" => Some(("common", "total-length")),
        "Visible" => Some(("common", "visible")),
        "Top Attachment" => Some(("common", "top-attachment-e7595c")),
        "Bottom Attachment" => Some(("common", "bottom-attachment-28500d")),
        "Varies" => Some(("common", "varies")),
        "Title suppressed" => Some(("common", "title-suppressed")),
        "Header suppressed" => Some(("common", "header-suppressed")),
        "Row height" => Some(("common", "row-height")),
        "Horizontal cell margin" => Some(("common", "horizontal-cell-margin")),
        "Vertical cell margin" => Some(("common", "vertical-cell-margin")),
        "Table overrides" => Some(("common", "table-overrides")),
        "Insertion X" => Some(("common", "insertion-x")),
        "Insertion Y" => Some(("common", "insertion-y")),
        "Insertion Z" => Some(("common", "insertion-z")),
        "Cell" => Some(("common", "cell")),
        "Current cell" => Some(("common", "current-cell")),
        "Row" => Some(("common", "row")),
        "Column" => Some(("common", "column")),
        "Cell style" => Some(("common", "cell-style")),
        "Cell type" => Some(("common", "cell-type")),
        "Content color" => Some(("common", "content-color")),
        "Data format" => Some(("common", "data-format")),
        "Background fill" => Some(("common", "background-fill")),
        "Left margin" => Some(("common", "left-margin")),
        "Top margin" => Some(("common", "top-margin")),
        "Right margin" => Some(("common", "right-margin")),
        "Bottom margin" => Some(("common", "bottom-margin")),
        "Top border" => Some(("common", "top-border")),
        "Right border" => Some(("common", "right-border")),
        "Bottom border" => Some(("common", "bottom-border")),
        "Left border" => Some(("common", "left-border")),
        "Maximum height" => Some(("common", "maximum-height")),
        "Open CAD file" => Some(("common", "open-cad-file")),
        "Backup / Autosave" => Some(("common", "backup-autosave")),
        "Load layer standard" => Some(("common", "load-layer-standard")),
        "Drawings and standards" => Some(("common", "drawings-and-standards")),
        "Layer mappings" => Some(("common", "layer-mappings")),
        "Load Plot Style Table" => Some(("common", "load-plot-style-table")),
        "Plot Style Tables" => Some(("common", "plot-style-tables")),
        "CTB Files" => Some(("common", "ctb-files")),
        "Select Image File" => Some(("common", "select-image-file")),
        "Images" => Some(("common", "images")),
        "PNG" => Some(("common", "png")),
        "JPEG" => Some(("common", "jpeg")),
        "Export as PDF" => Some(("common", "export-as-pdf")),
        "DIMARC  Enter dimension text (blank = measured value):" => Some(("annotate", "dimarc-enter-dimension-text-blank-measured-value")),
        "DIMARC  Specify text angle (degrees):" => Some(("annotate", "dimarc-specify-text-angle-degrees")),
        "DIMARC  Select arc or polyline arc segment:" => Some(("annotate", "dimarc-select-arc-or-polyline-arc-segment")),
        "DIMARC  Specify arc length dimension location [Mtext/Text/Angle/Partial{leader_option}]:" => Some(("annotate", "dimarc-specify-arc-length-dimension-location-mtext-text-angle-partial")),
        "DIMARC  Specify first point of partial arc:" => Some(("annotate", "dimarc-specify-first-point-of-partial-arc")),
        "DIMARC  Specify second point of partial arc:" => Some(("annotate", "dimarc-specify-second-point-of-partial-arc")),
        "DIMBASELINE  Select base dimension:" => Some(("annotate", "dimbaseline-select-base-dimension")),
        "DIMBASELINE  Specify feature location [Undo/Select] <Select>:" => Some(("annotate", "dimbaseline-specify-feature-location-undo-select-select")),
        "DIMBASELINE  Specify second extension line origin [Select/Undo] <Select>:" => Some(("annotate", "dimbaseline-specify-second-extension-line-origin-select-undo-select")),
        "DIMCONTINUE  Select continued dimension:" => Some(("annotate", "dimcontinue-select-continued-dimension")),
        "DIMCONTINUE  Specify feature location [Undo/Select] <Select>:" => Some(("annotate", "dimcontinue-specify-feature-location-undo-select-select")),
        "DIMCONTINUE  Specify second extension line origin [Select/Undo] <Select>:" => Some(("annotate", "dimcontinue-specify-second-extension-line-origin-select-undo-select")),
        "LEADER  Specify landing point:" => Some(("annotate", "leader-specify-landing-point")),
        "DIMLINEAR  Enter formatted dimension text (blank = measured value):" => Some(("annotate", "dimlinear-enter-formatted-dimension-text-blank-measured-value")),
        "DIMLINEAR  Specify dimension line angle (degrees):" => Some(("annotate", "dimlinear-specify-dimension-line-angle-degrees")),
        "DIMLINEAR  Select object to dimension:" => Some(("annotate", "dimlinear-select-object-to-dimension")),
        "DIMLINEAR  Specify first extension line origin or press Enter to select object:" => Some(("annotate", "dimlinear-specify-first-extension-line-origin-or-press-enter-to-select-object")),
        "DIMLINEAR  Specify second extension line origin:" => Some(("annotate", "dimlinear-specify-second-extension-line-origin-ce3c00")),
        "DIMLINEAR  Specify dimension line location  [Mtext/Text/Angle/Horizontal/Vertical/Rotated]:" => Some(("annotate", "dimlinear-specify-dimension-line-location-mtext-text-angle-horizontal-vertical-rotate")),
        "MLEADER  Options [Leader type/Landing/Content type/Max points/First angle/Second angle/Layer/Exit]:" => Some(("annotate", "mleader-options-leader-type-landing-content-type-max-points-first-angle-second-angle")),
        "MLEADER  Leader type [Straight/Spline/None]:" => Some(("annotate", "mleader-leader-type-straight-spline-none")),
        "MLEADER  Leader landing [Yes/No]:" => Some(("annotate", "mleader-leader-landing-yes-no")),
        "MLEADER  Specify landing distance:" => Some(("annotate", "mleader-specify-landing-distance")),
        "MLEADER  Content type [MText/Block/None]:" => Some(("annotate", "mleader-content-type-mtext-block-none")),
        "MLEADER  Enter maximum leader points:" => Some(("annotate", "mleader-enter-maximum-leader-points")),
        "MLEADER  First segment angle [Any/15/30/45/60/90]:" => Some(("annotate", "mleader-first-segment-angle-any-15-30-45-60-90")),
        "MLEADER  Second segment angle [Any/15/30/45/60/90]:" => Some(("annotate", "mleader-second-segment-angle-any-15-30-45-60-90")),
        "MLEADER  Enter layer name:" => Some(("annotate", "mleader-enter-layer-name")),
        "MLEADER  Enter text:" => Some(("annotate", "mleader-enter-text")),
        "MLEADER  Select an MText object:" => Some(("annotate", "mleader-select-an-mtext-object")),
        "MLEADER  Enter source block name:" => Some(("annotate", "mleader-enter-source-block-name")),
        "MLEADER  Specify arrowhead point or [Landing first/Content first/Text/Select MText/Options]:" => Some(("annotate", "mleader-specify-arrowhead-point-or-landing-first-content-first-text-select-mtext-opti")),
        "MLEADER  Specify landing point or [Arrowhead first/Content first/Text/Select MText/Options]:" => Some(("annotate", "mleader-specify-landing-point-or-arrowhead-first-content-first-text-select-mtext-opti")),
        "MLEADER  Specify content location or [Arrowhead first/Landing first/Text/Select MText/Options]:" => Some(("annotate", "mleader-specify-content-location-or-arrowhead-first-landing-first-text-select-mtext-o")),
        "MLEADER  Specify next leader point or press Enter to finish:" => Some(("annotate", "mleader-specify-next-leader-point-or-press-enter-to-finish")),
        "MTEXT  Specify first corner:" => Some(("annotate", "mtext-specify-first-corner")),
        "MTEXT  Specify opposite corner:" => Some(("annotate", "mtext-specify-opposite-corner")),
        "MTEXT  Specify text height <{}>:" => Some(("annotate", "mtext-specify-text-height")),
        "MTEXT  Enter justification [TL / TC / TR / ML / MC / MR / BL / BC / BR] <TL>:" => Some(("annotate", "mtext-enter-justification-tl-tc-tr-ml-mc-mr-bl-bc-br-tl")),
        "MTEXT  Enter line spacing factor (0.25-4.00) <{}>:" => Some(("annotate", "mtext-enter-line-spacing-factor-0-25-4-00")),
        "MTEXT  Specify rotation angle <{}>:" => Some(("annotate", "mtext-specify-rotation-angle")),
        "MTEXT  Enter text style <{}>:" => Some(("annotate", "mtext-enter-text-style")),
        "MTEXT  Specify boundary width <{}>:" => Some(("annotate", "mtext-specify-boundary-width")),
        "MTEXT  Columns [None / Static / Dynamic] <None>:" => Some(("annotate", "mtext-columns-none-static-dynamic-none")),
        "MTEXT  Enter column count <{}>:" => Some(("annotate", "mtext-enter-column-count")),
        "MTEXT  Enter column width <{}>:" => Some(("annotate", "mtext-enter-column-width")),
        "MTEXT  Enter column gutter <{}>:" => Some(("annotate", "mtext-enter-column-gutter")),
        "QDIM  Specify dimension line position or choose an option:" => Some(("annotate", "qdim-specify-dimension-line-position-or-choose-an-option")),
        "QDIM  Specify datum point:" => Some(("annotate", "qdim-specify-datum-point")),
        "QDIM  Select a point to remove (Enter when done):" => Some(("annotate", "qdim-select-a-point-to-remove-enter-when-done")),
        "QDIM  Choose extension origin priority [Endpoints/Intersections]:" => Some(("annotate", "qdim-choose-extension-origin-priority-endpoints-intersections")),
        "TABLEDIT  Select a table cell:" => Some(("annotate", "tabledit-select-a-table-cell")),
        "TEXT  Current style: {}, Height: {}, Annotative: {}" => Some(("annotate", "text-current-style-height-annotative")),
        "TEXT  Specify start point or [Justify/Style]:" => Some(("annotate", "text-specify-start-point-or-justify-style")),
        "TEXT  Enter justification [Left/Center/Right/Aligned/Middle/Fit/TL/TC/TR/ML/MC/MR/BL/BC/BR]:" => Some(("annotate", "text-enter-justification-left-center-right-aligned-middle-fit-tl-tc-tr-ml-mc-mr-bl-bc")),
        "TEXT  Enter style name <{}>:" => Some(("annotate", "text-enter-style-name")),
        "TEXT  Specify paper text height <{}>:" => Some(("annotate", "text-specify-paper-text-height")),
        "TEXT  Specify height <{}>:" => Some(("annotate", "text-specify-height")),
        "TEXT  Specify rotation angle <{}>:" => Some(("annotate", "text-specify-rotation-angle")),
        "TEXT  Specify second endpoint:" => Some(("annotate", "text-specify-second-endpoint")),
        "TOLERANCE  Specify insertion point:" => Some(("annotate", "tolerance-specify-insertion-point")),
        "CIRCLE  Specify diameter  <{:.4}>:" => Some(("draw", "circle-specify-diameter")),
        "CENTERMARK  Select arc or circle <finish>:" => Some(("draw", "centermark-select-arc-or-circle-finish")),
        "CENTERREASSOCIATE  Select new arc or circle:" => Some(("draw", "centerreassociate-select-new-arc-or-circle")),
        "3DFACE  Specify first point or [Invisible]:" => Some(("draw", "value-3dface-specify-first-point-or-invisible")),
        "3DFACE  Specify second point or [Invisible]:" => Some(("draw", "value-3dface-specify-second-point-or-invisible")),
        "3DFACE  Specify third point or [Invisible] <exit>:" => Some(("draw", "value-3dface-specify-third-point-or-invisible-exit")),
        "3DFACE  Specify fourth point or [Invisible] <create three-sided face>:" => Some(("draw", "value-3dface-specify-fourth-point-or-invisible-create-three-sided-face")),
        "EDGE  Select edge of 3D face to toggle visibility or [Display]:" => Some(("draw", "edge-select-edge-of-3d-face-to-toggle-visibility-or-display")),
        "EDGE  Display invisible edges [All/Select] <Select>:" => Some(("draw", "edge-display-invisible-edges-all-select-select")),
        "EDGE  Select 3D faces to display invisible edges <done>:" => Some(("draw", "edge-select-3d-faces-to-display-invisible-edges-done")),
        "Select" => Some(("draw", "select")),
        "HATCH  Pick internal point (%{count} regions selected; P <pattern> / A <angle> / L <scale>; Enter to apply):%{miss}" => Some(("draw", "hatch-pick-internal-point-regions-selected-p-pattern-a-angle-l-scale-enter-to-apply")),
        "  ⚠ Selection has no closed boundary." => Some(("draw", "selection-has-no-closed-boundary")),
        "HATCH  Select boundary objects (%{objects} objects, %{count} regions; P <pattern> / A <angle> / L <scale>; Enter to apply):%{miss}" => Some(("draw", "hatch-select-boundary-objects-objects-regions-p-pattern-a-angle-l-scale-enter-to-appl")),
        "Select objects" => Some(("draw", "select-objects")),
        "Island style: {}" => Some(("draw", "island-style")),
        "Pick internal points" => Some(("draw", "pick-internal-points")),
        "HATCHEDIT  Pattern:%{name}  Scale:%{scale}  Angle:%{angle}  [P pattern / S scale / A angle / O x,y / D disassociate / Y style / N annotative / R recreate / E separate / + handles / - handles | Enter]:" => Some(("draw", "hatchedit-pattern-scale-angle-p-pattern-s-scale-a-angle-o-x-y-d-disassociate-y-style")),
        "HELIX  Number of turns = {:.4}  Twist = {}\nSpecify center point of base:" => Some(("draw", "helix-number-of-turns-twist-specify-center-point-of-base")),
        "HELIX  Specify base radius or [Diameter] <{:.4}>:" => Some(("draw", "helix-specify-base-radius-or-diameter")),
        "HELIX  Specify base diameter <{:.4}>:" => Some(("draw", "helix-specify-base-diameter")),
        "HELIX  Specify top radius or [Diameter] <{:.4}>:" => Some(("draw", "helix-specify-top-radius-or-diameter")),
        "HELIX  Specify top diameter <{:.4}>:" => Some(("draw", "helix-specify-top-diameter")),
        "HELIX  Specify helix height or [Axis endpoint/Turns/turn Height/tWist] <{:.4}>:" => Some(("draw", "helix-specify-helix-height-or-axis-endpoint-turns-turn-height-twist")),
        "HELIX  Specify axis endpoint:" => Some(("draw", "helix-specify-axis-endpoint")),
        "HELIX  Enter number of turns <{:.4}>:" => Some(("draw", "helix-enter-number-of-turns")),
        "HELIX  Specify distance between turns <{:.4}>:" => Some(("draw", "helix-specify-distance-between-turns")),
        "HELIX  Enter twist direction [Clockwise/Counterclockwise] <{}>:" => Some(("draw", "helix-enter-twist-direction-clockwise-counterclockwise")),
        "Axis endpoint" => Some(("draw", "axis-endpoint")),
        "Clockwise" => Some(("draw", "clockwise")),
        "Counterclockwise" => Some(("draw", "counterclockwise")),
        "3DMESH  Enter size of mesh in M direction (2-256):" => Some(("draw", "value-3dmesh-enter-size-of-mesh-in-m-direction-2-256")),
        "3DMESH  Enter size of mesh in N direction (2-256):" => Some(("draw", "value-3dmesh-enter-size-of-mesh-in-n-direction-2-256")),
        "3DMESH  Specify location for vertex (%{m}, %{n}):" => Some(("draw", "value-3dmesh-specify-location-for-vertex")),
        "no layers found in that file" => Some(("draw", "no-layers-found-in-that-file")),
        "layer \"0\" cannot be translated" => Some(("draw", "layer-0-cannot-be-translated")),
        "it is the current layer" => Some(("draw", "it-is-the-current-layer")),
        "no such layer in this drawing" => Some(("draw", "no-such-layer-in-this-drawing")),
        "target layer is not in the loaded set" => Some(("draw", "target-layer-is-not-in-the-loaded-set")),
        "ALIGN  Scale objects based on alignment points? [Yes / No]:" => Some(("draw", "align-scale-objects-based-on-alignment-points-yes-no")),
        "OFFSET distance = %{d}" => Some(("draw", "offset-distance")),
        "OFFSET  Specify offset distance or first reference point [Through] <%{d}>:" => Some(("draw", "offset-specify-offset-distance-or-first-reference-point-through")),
        "OFFSET  Specify second reference point:" => Some(("draw", "offset-specify-second-reference-point")),
        "PEDIT  Edit mesh vertex %{vertex}  Enter option:" => Some(("draw", "pedit-edit-mesh-vertex-enter-option")),
        "PEDIT  Specify new location for mesh vertex %{vertex}:" => Some(("draw", "pedit-specify-new-location-for-mesh-vertex")),
        "Edit vertex" => Some(("draw", "edit-vertex")),
        "Smooth surface" => Some(("draw", "smooth-surface")),
        "Desmooth" => Some(("draw", "desmooth")),
        "M open" => Some(("draw", "m-open")),
        "M close" => Some(("draw", "m-close")),
        "N open" => Some(("draw", "n-open")),
        "N close" => Some(("draw", "n-close")),
        "Next" => Some(("draw", "next")),
        "Regen" => Some(("draw", "regen")),
        "STRETCH  Specify first corner of another crossing window, or press Enter to continue:" => Some(("draw", "stretch-specify-first-corner-of-another-crossing-window-or-press-enter-to-continue")),
        "Crossing polygon" => Some(("draw", "crossing-polygon")),
        "Window polygon" => Some(("draw", "window-polygon")),
        "%{mode}: pick points (%{count} placed, Enter to apply):" => Some(("draw", "pick-points-placed-enter-to-apply")),
        "WPolygon" => Some(("draw", "wpolygon")),
        "CPolygon" => Some(("draw", "cpolygon")),
        "Remove" => Some(("draw", "remove")),
        "INSERT  Enter block name:" => Some(("insert", "insert-enter-block-name")),
        "INSERT  No matching blocks for \"%{needle}\"" => Some(("insert", "insert-no-matching-blocks-for")),
        "INSERT  Enter block name:  [%{shown} of %{total} — type to search]" => Some(("insert", "insert-enter-block-name-of-type-to-search")),
        "INSERT  Enter block name:  \"%{needle}\"  [%{shown} matches]" => Some(("insert", "insert-enter-block-name-matches")),
        "MINSERT  Enter block name:" => Some(("insert", "minsert-enter-block-name")),
        "MINSERT  No matching blocks for \"%{needle}\"" => Some(("insert", "minsert-no-matching-blocks-for")),
        "MINSERT  Enter block name:  [%{shown} of %{total} — type to search]" => Some(("insert", "minsert-enter-block-name-of-type-to-search")),
        "MINSERT  Enter block name:  \"%{needle}\"  [%{shown} matches]" => Some(("insert", "minsert-enter-block-name-matches")),
        "PDFATTACH  Specify insertion point:" => Some(("insert", "pdfattach-specify-insertion-point")),
        "EXTRUDE  Select objects to extrude or [Mode] (Enter to finish):" => Some(("insert", "extrude-select-objects-to-extrude-or-mode-enter-to-finish")),
        "EXTRUDE  Creation mode [Solid/Surface]" => Some(("insert", "extrude-creation-mode-solid-surface")),
        "EXTRUDE  Specify height or [Direction/Path/Taper angle/Expression]" => Some(("insert", "extrude-specify-height-or-direction-path-taper-angle-expression")),
        "EXTRUDE  Start point of direction:" => Some(("insert", "extrude-start-point-of-direction")),
        "EXTRUDE  End point of direction:" => Some(("insert", "extrude-end-point-of-direction")),
        "EXTRUDE  Select extrusion path or [Taper angle]:" => Some(("insert", "extrude-select-extrusion-path-or-taper-angle")),
        "EXTRUDE  Specify taper angle or [Expression]" => Some(("insert", "extrude-specify-taper-angle-or-expression")),
        "EXTRUDE  Enter height expression:" => Some(("insert", "extrude-enter-height-expression")),
        "EXTRUDE  Enter taper angle expression:" => Some(("insert", "extrude-enter-taper-angle-expression")),
        "PRESSPULL  Select object or bounded area (Enter to finish):" => Some(("insert", "presspull-select-object-or-bounded-area-enter-to-finish")),
        "PRESSPULL  Select additional objects or bounded areas [Undo] (Enter for height):" => Some(("insert", "presspull-select-additional-objects-or-bounded-areas-undo-enter-for-height")),
        "PRESSPULL  Specify signed extrusion height or [Multiple/Undo]:" => Some(("insert", "presspull-specify-signed-extrusion-height-or-multiple-undo")),
        "SWEEP  Select objects to sweep or [Mode] (Enter to finish):" => Some(("insert", "sweep-select-objects-to-sweep-or-mode-enter-to-finish")),
        "SWEEP  Creation mode [Solid/Surface]" => Some(("insert", "sweep-creation-mode-solid-surface")),
        "SWEEP  Select sweep path or [Alignment/Base point/Scale/Twist]:" => Some(("insert", "sweep-select-sweep-path-or-alignment-base-point-scale-twist")),
        "SWEEP  Align sweep object perpendicular to path [Yes/No]" => Some(("insert", "sweep-align-sweep-object-perpendicular-to-path-yes-no")),
        "SWEEP  Specify base point:" => Some(("insert", "sweep-specify-base-point")),
        "SWEEP  Enter scale factor or [Reference]" => Some(("insert", "sweep-enter-scale-factor-or-reference")),
        "SWEEP  Specify reference length or first point" => Some(("insert", "sweep-specify-reference-length-or-first-point")),
        "SWEEP  Specify second reference point:" => Some(("insert", "sweep-specify-second-reference-point")),
        "SWEEP  Specify new length or [Points]" => Some(("insert", "sweep-specify-new-length-or-points")),
        "SWEEP  Specify first point of new length:" => Some(("insert", "sweep-specify-first-point-of-new-length")),
        "SWEEP  Specify second point of new length:" => Some(("insert", "sweep-specify-second-point-of-new-length")),
        "SWEEP  Specify twist angle or [Bank]" => Some(("insert", "sweep-specify-twist-angle-or-bank")),
        "Point cross-sections are allowed only at the first or last end, with a curve between point ends." => Some(("insert", "point-cross-sections-are-allowed-only-at-the-first-or-last-end-with-a-curve-between-p")),
        "LOFT requires at least two cross-sections." => Some(("insert", "loft-requires-at-least-two-cross-sections")),
        "A closed loft requires at least three curve cross-sections and no point ends." => Some(("insert", "a-closed-loft-requires-at-least-three-curve-cross-sections-and-no-point-ends")),
        "A point must remain the last cross-section; use Undo to change the end." => Some(("insert", "a-point-must-remain-the-last-cross-section-use-undo-to-change-the-end")),
        "That cross-section is already selected." => Some(("insert", "that-cross-section-is-already-selected")),
        "Select a supported planar curve or region cross-section." => Some(("insert", "select-a-supported-planar-curve-or-region-cross-section")),
        "Add a curve cross-section between point ends." => Some(("insert", "add-a-curve-cross-section-between-point-ends")),
        "LOFT  Select cross-sections in order or [Point/Join/Mode/Undo] (Enter to finish)" => Some(("insert", "loft-select-cross-sections-in-order-or-point-join-mode-undo-enter-to-finish")),
        "LOFT  Select connected edges for one cross-section or [Undo] (Enter to finish)" => Some(("insert", "loft-select-connected-edges-for-one-cross-section-or-undo-enter-to-finish")),
        "LOFT  Specify point end:" => Some(("insert", "loft-specify-point-end")),
        "LOFT  Creation mode [Solid/Surface]" => Some(("insert", "loft-creation-mode-solid-surface")),
        "LOFT  Enter an option [Guides/Path/Cross sections only/Settings/Continuity/Bulge magnitude/Mode/Undo] <Cross sections only>:" => Some(("insert", "loft-enter-an-option-guides-path-cross-sections-only-settings-continuity-bulge-magnit")),
        "LOFT  Enter an option [Guides/Path/Cross sections only/Settings/Mode/Undo] <Cross sections only>:" => Some(("insert", "loft-enter-an-option-guides-path-cross-sections-only-settings-mode-undo-cross-section")),
        "LOFT  Select guide curves or [Undo] (Enter to finish)" => Some(("insert", "loft-select-guide-curves-or-undo-enter-to-finish")),
        "LOFT  Select path or [Undo]:" => Some(("insert", "loft-select-path-or-undo")),
        "Normals" => Some(("insert", "normals")),
        "Draft angles" => Some(("insert", "draft-angles")),
        "Magnitudes" => Some(("insert", "magnitudes")),
        "Align direction" => Some(("insert", "align-direction")),
        "LOFT  Settings" => Some(("insert", "loft-settings")),
        "LOFT  Surface normals [Ruled/Smooth/First normal/Last normal/Ends normal/All normal/Use draft angles]:" => Some(("insert", "loft-surface-normals-ruled-smooth-first-normal-last-normal-ends-normal-all-normal-use")),
        "LOFT  Start draft angle" => Some(("insert", "loft-start-draft-angle")),
        "LOFT  End draft angle" => Some(("insert", "loft-end-draft-angle")),
        "LOFT  Start magnitude" => Some(("insert", "loft-start-magnitude")),
        "LOFT  End magnitude" => Some(("insert", "loft-end-magnitude")),
        "LOFT  Start point continuity [G0/G1]" => Some(("insert", "loft-start-point-continuity-g0-g1")),
        "LOFT  End point continuity [G0/G1]" => Some(("insert", "loft-end-point-continuity-g0-g1")),
        "LOFT  Start point bulge magnitude" => Some(("insert", "loft-start-point-bulge-magnitude")),
        "LOFT  End point bulge magnitude" => Some(("insert", "loft-end-point-bulge-magnitude")),
        "LOFT  Closed [Yes/No]" => Some(("insert", "loft-closed-yes-no")),
        "LOFT  Align cross-section directions [Yes/No]" => Some(("insert", "loft-align-cross-section-directions-yes-no")),
        "A cross-section cannot also be a guide, path, or joined edge." => Some(("insert", "a-cross-section-cannot-also-be-a-guide-path-or-joined-edge")),
        "Select a supported guide or path curve." => Some(("insert", "select-a-supported-guide-or-path-curve")),
        "That edge is already selected." => Some(("insert", "that-edge-is-already-selected")),
        "That guide is already selected." => Some(("insert", "that-guide-is-already-selected")),
        "Select a curve cross-section before another point end." => Some(("insert", "select-a-curve-cross-section-before-another-point-end")),
        "Select a cross-section or enter Point, Join, Mode, or Undo." => Some(("insert", "select-a-cross-section-or-enter-point-join-mode-or-undo")),
        "Enter Solid or Surface." => Some(("insert", "enter-solid-or-surface")),
        "Continuity and bulge magnitude require a point cross-section at an end." => Some(("insert", "continuity-and-bulge-magnitude-require-a-point-cross-section-at-an-end")),
        "Enter one of the listed loft options." => Some(("insert", "enter-one-of-the-listed-loft-options")),
        "Choose Use draft angles under Normals before editing draft angles or magnitudes." => Some(("insert", "choose-use-draft-angles-under-normals-before-editing-draft-angles-or-magnitudes")),
        "Closed is available for at least three curve cross-sections without point ends." => Some(("insert", "closed-is-available-for-at-least-three-curve-cross-sections-without-point-ends")),
        "Enter a listed loft setting." => Some(("insert", "enter-a-listed-loft-setting")),
        "Select one of the seven surface normal options." => Some(("insert", "select-one-of-the-seven-surface-normal-options")),
        "Enter a finite draft angle from 0 to 180 degrees or a non-negative magnitude." => Some(("insert", "enter-a-finite-draft-angle-from-0-to-180-degrees-or-a-non-negative-magnitude")),
        "Enter G0 or G1." => Some(("insert", "enter-g0-or-g1")),
        "Enter a finite, non-negative bulge magnitude." => Some(("insert", "enter-a-finite-non-negative-bulge-magnitude")),
        "Enter Yes or No." => Some(("insert", "enter-yes-or-no")),
        "Select a curve or use Undo." => Some(("insert", "select-a-curve-or-use-undo")),
        "LOFT requires at least two cross-sections; select another section or a point end." => Some(("insert", "loft-requires-at-least-two-cross-sections-select-another-section-or-a-point-end")),
        "Select connected edges for the cross-section." => Some(("insert", "select-connected-edges-for-the-cross-section")),
        "Select at least one guide curve." => Some(("insert", "select-at-least-one-guide-curve")),
        "Specify the requested path or point, or use Undo." => Some(("insert", "specify-the-requested-path-or-point-or-use-undo")),
        "SUBTRACT  Select base solids, then press Enter:" => Some(("model", "subtract-select-base-solids-then-press-enter")),
        "SUBTRACT  Select solids to subtract, then press Enter:" => Some(("model", "subtract-select-solids-to-subtract-then-press-enter")),
        "CYLINDER  Specify center point of base or [3P/2P/Ttr/Elliptical]:" => Some(("model", "cylinder-specify-center-point-of-base-or-3p-2p-ttr-elliptical")),
        "CYLINDER  Specify base radius or [Diameter] <{:.4}>:" => Some(("model", "cylinder-specify-base-radius-or-diameter")),
        "CYLINDER  Specify base diameter <{:.4}>:" => Some(("model", "cylinder-specify-base-diameter")),
        "CYLINDER  Specify first point on base:" => Some(("model", "cylinder-specify-first-point-on-base")),
        "CYLINDER  Specify second point on base:" => Some(("model", "cylinder-specify-second-point-on-base")),
        "CYLINDER  Specify third point on base:" => Some(("model", "cylinder-specify-third-point-on-base")),
        "CYLINDER  Specify first endpoint of base diameter:" => Some(("model", "cylinder-specify-first-endpoint-of-base-diameter")),
        "CYLINDER  Specify second endpoint of base diameter:" => Some(("model", "cylinder-specify-second-endpoint-of-base-diameter")),
        "CYLINDER  Specify endpoint of first axis or [Center]:" => Some(("model", "cylinder-specify-endpoint-of-first-axis-or-center")),
        "CYLINDER  Specify center point:" => Some(("model", "cylinder-specify-center-point")),
        "CYLINDER  Specify distance to first axis <{:.4}>:" => Some(("model", "cylinder-specify-distance-to-first-axis")),
        "CYLINDER  Specify endpoint of second axis:" => Some(("model", "cylinder-specify-endpoint-of-second-axis")),
        "CYLINDER  Specify other endpoint of first axis:" => Some(("model", "cylinder-specify-other-endpoint-of-first-axis")),
        "CYLINDER  Select first tangent object:" => Some(("model", "cylinder-select-first-tangent-object")),
        "CYLINDER  Select second tangent object:" => Some(("model", "cylinder-select-second-tangent-object")),
        "CYLINDER  Specify base radius <{:.4}>:" => Some(("model", "cylinder-specify-base-radius")),
        "CYLINDER  Specify height or [2Point/Axis endpoint] <{:.4}>:" => Some(("model", "cylinder-specify-height-or-2point-axis-endpoint")),
        "CYLINDER  Specify first point for height:" => Some(("model", "cylinder-specify-first-point-for-height")),
        "CYLINDER  Specify second point for height:" => Some(("model", "cylinder-specify-second-point-for-height")),
        "CYLINDER  Specify axis endpoint:" => Some(("model", "cylinder-specify-axis-endpoint")),
        "Elliptical" => Some(("model", "elliptical")),
        "Select a solid edge:" => Some(("model", "select-a-solid-edge")),
        "Select an edge or [Chain/Loop/Radius]:" => Some(("model", "filletedge-select-edge-or-chain-loop-radius")),
        "Select an edge chain or [Edge/Radius]:" => Some(("model", "filletedge-select-edge-chain-or-edge-radius")),
        "Select edge of loop or [Edge/Chain/Radius]:" => Some(("model", "filletedge-select-loop-edge-or-edge-chain-radius")),
        "Enter an option [Accept/Next] <Accept>:" => Some(("model", "filletedge-enter-option-accept-next")),
        "Press Enter to accept the fillet or [Radius]:" => Some(("model", "filletedge-accept-or-radius")),
        "Enter fillet radius or [Expression] <{:.4}>:" => Some(("model", "filletedge-enter-radius-or-expression")),
        "Specify Radius or [Expression] <{:.4}>:" => Some(("model", "filletedge-specify-radius-or-expression")),
        "Enter expression:" => Some(("model", "filletedge-enter-expression")),
        "Specify fillet radius <{:.3}>:" => Some(("model", "specify-fillet-radius")),
        "Specify chamfer distance <{:.3}>:" => Some(("model", "specify-chamfer-distance")),
        "A selected edge no longer belongs to the solid." => Some(("model", "filletedge-stale-edge")),
        "The solid history could not be created." => Some(("model", "filletedge-history-create-failed")),
        "The fillet history could not be recorded." => Some(("model", "filletedge-history-append-failed")),
        "POLYSOLID  Height = {:.4}, Width = {:.4}, Justification = {}\n{}" => Some(("model", "polysolid-height-width-justification")),
        "Specify start point or [Object/Height/Width/Justify] <Object>:" => Some(("model", "specify-start-point-or-object-height-width-justify-object")),
        "Specify height <{:.4}>:" => Some(("model", "specify-height")),
        "Specify width <{:.4}>:" => Some(("model", "specify-width")),
        "Enter justification [Left/Center/Right] <{}>:" => Some(("model", "enter-justification-left-center-right")),
        "Select object:" => Some(("model", "select-object")),
        "Specify next point or [Arc/Close/Undo]:" => Some(("model", "specify-next-point-or-arc-close-undo")),
        "Specify next point or [Arc/Undo]:" => Some(("model", "specify-next-point-or-arc-undo")),
        "Specify endpoint of arc or [Close/Direction/Line/Second point/Undo]:" => Some(("model", "specify-endpoint-of-arc-or-close-direction-line-second-point-undo")),
        "Specify endpoint of arc or [Direction/Line/Second point/Undo]:" => Some(("model", "specify-endpoint-of-arc-or-direction-line-second-point-undo")),
        "Specify the tangent direction for the start point of arc:" => Some(("model", "specify-the-tangent-direction-for-the-start-point-of-arc")),
        "Specify second point on arc:" => Some(("model", "specify-second-point-on-arc")),
        "Specify end point of arc:" => Some(("model", "specify-end-point-of-arc")),
        "Second point" => Some(("model", "second-point")),
        "CONE  Specify center point of base or [3P/2P/Ttr/Elliptical]:" => Some(("model", "cone-specify-center-point-of-base-or-3p-2p-ttr-elliptical")),
        "CONE  Specify base radius or [Diameter] <{:.4}>:" => Some(("model", "cone-specify-base-radius-or-diameter")),
        "CONE  Specify base diameter <{:.4}>:" => Some(("model", "cone-specify-base-diameter")),
        "CONE  Specify first point on base:" => Some(("model", "cone-specify-first-point-on-base")),
        "CONE  Specify second point on base:" => Some(("model", "cone-specify-second-point-on-base")),
        "CONE  Specify third point on base:" => Some(("model", "cone-specify-third-point-on-base")),
        "CONE  Specify first endpoint of base diameter:" => Some(("model", "cone-specify-first-endpoint-of-base-diameter")),
        "CONE  Specify second endpoint of base diameter:" => Some(("model", "cone-specify-second-endpoint-of-base-diameter")),
        "CONE  Specify endpoint of first axis or [Center]:" => Some(("model", "cone-specify-endpoint-of-first-axis-or-center")),
        "CONE  Specify center point:" => Some(("model", "cone-specify-center-point")),
        "CONE  Specify distance to first axis <{:.4}>:" => Some(("model", "cone-specify-distance-to-first-axis")),
        "CONE  Specify endpoint of second axis:" => Some(("model", "cone-specify-endpoint-of-second-axis")),
        "CONE  Specify second endpoint of ellipse axis:" => Some(("model", "cone-specify-second-endpoint-of-ellipse-axis")),
        "CONE  Specify distance to other ellipse axis:" => Some(("model", "cone-specify-distance-to-other-ellipse-axis")),
        "CONE  Select first tangent object:" => Some(("model", "cone-select-first-tangent-object")),
        "CONE  Select second tangent object:" => Some(("model", "cone-select-second-tangent-object")),
        "CONE  Specify base radius <{:.4}>:" => Some(("model", "cone-specify-base-radius")),
        "CONE  Specify height or [2Point/Axis endpoint/Top radius] <{:.4}>:" => Some(("model", "cone-specify-height-or-2point-axis-endpoint-top-radius")),
        "CONE  Specify height or [2Point/Axis endpoint] <{:.4}>:" => Some(("model", "cone-specify-height-or-2point-axis-endpoint")),
        "CONE  Specify first point for height:" => Some(("model", "cone-specify-first-point-for-height")),
        "CONE  Specify second point for height:" => Some(("model", "cone-specify-second-point-for-height")),
        "CONE  Specify axis endpoint:" => Some(("model", "cone-specify-axis-endpoint")),
        "CONE  Specify top radius <{:.4}>:" => Some(("model", "cone-specify-top-radius")),
        "PYRAMID  Specify center point of base or [Edge/Sides]:" => Some(("model", "pyramid-specify-center-point-of-base-or-edge-sides")),
        "PYRAMID  Enter number of sides <{}>:" => Some(("model", "pyramid-enter-number-of-sides")),
        "PYRAMID  Specify first endpoint of edge:" => Some(("model", "pyramid-specify-first-endpoint-of-edge")),
        "PYRAMID  Specify second endpoint of edge:" => Some(("model", "pyramid-specify-second-endpoint-of-edge")),
        "PYRAMID  Specify base radius or [Inscribed] <{:.4}>:" => Some(("model", "pyramid-specify-base-radius-or-inscribed")),
        "PYRAMID  Specify base radius or [Circumscribed] <{:.4}>:" => Some(("model", "pyramid-specify-base-radius-or-circumscribed")),
        "PYRAMID  Specify height or [2Point/Axis endpoint/Top radius] <{:.4}>:" => Some(("model", "pyramid-specify-height-or-2point-axis-endpoint-top-radius")),
        "PYRAMID  Specify height or [2Point/Axis endpoint] <{:.4}>:" => Some(("model", "pyramid-specify-height-or-2point-axis-endpoint")),
        "PYRAMID  Specify first point for height:" => Some(("model", "pyramid-specify-first-point-for-height")),
        "PYRAMID  Specify second point for height:" => Some(("model", "pyramid-specify-second-point-for-height")),
        "PYRAMID  Specify axis endpoint:" => Some(("model", "pyramid-specify-axis-endpoint")),
        "PYRAMID  Specify top radius <{:.4}>:" => Some(("model", "pyramid-specify-top-radius")),
        "Sides" => Some(("model", "sides")),
        "Inscribed" => Some(("model", "inscribed")),
        "%{n}  Specify first corner or [Center]:" => Some(("model", "specify-first-corner-or-center")),
        "%{n}  Specify other corner or [Cube/Length]:" => Some(("model", "specify-other-corner-or-cube-length")),
        "%{n}  Specify cube length:" => Some(("model", "specify-cube-length")),
        "%{n}  Specify length:" => Some(("model", "specify-length")),
        "%{n}  Specify width:" => Some(("model", "specify-width-2ab697")),
        "%{n}  Specify height or [2Point] <%{height}>:" => Some(("model", "specify-height-or-2point")),
        "%{n}  Specify height or [2Point]:" => Some(("model", "specify-height-or-2point-ad4395")),
        "%{n}  Specify first point for height:" => Some(("model", "specify-first-point-for-height")),
        "%{n}  Specify second point for height:" => Some(("model", "specify-second-point-for-height")),
        "SPHERE  Specify center point or [3P/2P/Ttr]:" => Some(("model", "sphere-specify-center-point-or-3p-2p-ttr")),
        "SPHERE  Specify radius or [Diameter] <{:.4}>:" => Some(("model", "sphere-specify-radius-or-diameter")),
        "SPHERE  Specify diameter <{:.4}>:" => Some(("model", "sphere-specify-diameter")),
        "SPHERE  Specify first end point of diameter:" => Some(("model", "sphere-specify-first-end-point-of-diameter")),
        "SPHERE  Specify second end point of diameter:" => Some(("model", "sphere-specify-second-end-point-of-diameter")),
        "SPHERE  Specify first point on sphere:" => Some(("model", "sphere-specify-first-point-on-sphere")),
        "SPHERE  Specify second point on sphere:" => Some(("model", "sphere-specify-second-point-on-sphere")),
        "SPHERE  Specify third point on sphere:" => Some(("model", "sphere-specify-third-point-on-sphere")),
        "SPHERE  Select first tangent object:" => Some(("model", "sphere-select-first-tangent-object")),
        "SPHERE  Select second tangent object:" => Some(("model", "sphere-select-second-tangent-object")),
        "SPHERE  Specify radius <{:.4}>:" => Some(("model", "sphere-specify-radius")),
        "TORUS  Specify center point or [3P/2P/Ttr]:" => Some(("model", "torus-specify-center-point-or-3p-2p-ttr")),
        "TORUS  Specify radius or [Diameter] <{:.4}>:" => Some(("model", "torus-specify-radius-or-diameter")),
        "TORUS  Specify diameter <{:.4}>:" => Some(("model", "torus-specify-diameter")),
        "TORUS  Specify first end point of diameter:" => Some(("model", "torus-specify-first-end-point-of-diameter")),
        "TORUS  Specify second end point of diameter:" => Some(("model", "torus-specify-second-end-point-of-diameter")),
        "TORUS  Specify first point on torus:" => Some(("model", "torus-specify-first-point-on-torus")),
        "TORUS  Specify second point on torus:" => Some(("model", "torus-specify-second-point-on-torus")),
        "TORUS  Specify third point on torus:" => Some(("model", "torus-specify-third-point-on-torus")),
        "TORUS  Select first tangent object:" => Some(("model", "torus-select-first-tangent-object")),
        "TORUS  Select second tangent object:" => Some(("model", "torus-select-second-tangent-object")),
        "TORUS  Specify radius <{:.4}>:" => Some(("model", "torus-specify-radius")),
        "TORUS  Specify tube radius or [2Point/Diameter] <{:.4}>:" => Some(("model", "torus-specify-tube-radius-or-2point-diameter")),
        "TORUS  Specify tube diameter <{:.4}>:" => Some(("model", "torus-specify-tube-diameter")),
        "TORUS  Specify first end point of tube diameter:" => Some(("model", "torus-specify-first-end-point-of-tube-diameter")),
        "TORUS  Specify second end point of tube diameter:" => Some(("model", "torus-specify-second-end-point-of-tube-diameter")),
        "2Point" => Some(("model", "value-2point")),
        "Cube" => Some(("model", "cube")),
        "UCS  option [Face/OBject/World/View/3Point/Z/X/Y/Origin/Save/Delete] or name:" => Some(("view", "ucs-option-world-view-3point-z-x-y-origin-save-delete-or-name")),
        "UCS  specify new origin:" => Some(("view", "ucs-specify-new-origin")),
        "UCS  specify point on positive X axis:" => Some(("view", "ucs-specify-point-on-positive-x-axis")),
        "UCS  specify point in positive XY plane:" => Some(("view", "ucs-specify-point-in-positive-xy-plane")),
        "Extrusion" => Some(("common", "extrusion")),
        "Taper angle" => Some(("common", "taper-angle")),
        "Profile rotation" => Some(("common", "profile-rotation")),
        "Bank" => Some(("common", "bank")),
        "Twist along path" => Some(("common", "twist-along-path")),
        "Scale along path" => Some(("common", "scale-along-path")),
        "Loft with path" => Some(("common", "loft-with-path")),
        "Loft with guides" => Some(("common", "loft-with-guides")),
        "Loft with cross sections only" => Some(("common", "loft-with-cross-sections-only")),
        "Number of Cross sections" => Some(("common", "number-of-cross-sections")),
        "Surface Normals" => Some(("common", "surface-normals")),
        "Start draft angle" => Some(("common", "start-draft-angle")),
        "End draft angle" => Some(("common", "end-draft-angle")),
        "Start magnitude" => Some(("common", "start-magnitude")),
        "End magnitude" => Some(("common", "end-magnitude")),
        "Torus radius" => Some(("common", "torus-radius")),
        "Tube radius" => Some(("common", "tube-radius")),
        "Base major radius" => Some(("common", "base-major-radius")),
        "Base minor radius" => Some(("common", "base-minor-radius")),
        "Top major radius" => Some(("common", "top-major-radius")),
        "Top minor radius" => Some(("common", "top-minor-radius")),
        "OpenCADStudio renderer error — copy this into a bug report:" => Some(("common", "opencadstudio-renderer-error-copy-this-into-a-bug-report")),
        "Dismiss" => Some(("common", "dismiss")),
        "?" => Some(("common", "value-8a8de8")),
        "Select Color..." => Some(("common", "select-color-8dddf1")),
        "No recent colors yet" => Some(("common", "no-recent-colors-yet")),
        "True Color    RGB {r}, {g}, {b}" => Some(("common", "true-color-rgb")),
        "Index Color" => Some(("common", "index-color")),
        "True Color" => Some(("common", "true-color")),
        "Standard colors" => Some(("common", "standard-colors")),
        "CAD Color Index (ACI) 10–249" => Some(("common", "cad-color-index-aci-10-249")),
        "Color family  →    ·    Shade / intensity  ↓" => Some(("common", "color-family-shade-intensity")),
        "Grayscale 250–255" => Some(("common", "grayscale-250-255")),
        "Recently used" => Some(("common", "recently-used")),
        "Isometric drafting" => Some(("common", "isometric-drafting")),
        "F5 cycles the active plane." => Some(("common", "f5-cycles-the-active-plane")),
        "Units…" => Some(("common", "units-5430a1")),
        "Convert drawing…" => Some(("common", "convert-drawing")),
        "Open or create a drawing to use ribbon commands." => Some(("common", "open-or-create-a-drawing-to-use-ribbon-commands")),
        "Units (LUNITS)\nHow lengths are written\nClick to change" => Some(("common", "units-lunits-how-lengths-are-written-click-to-change")),
        "Use object lineweight" => Some(("common", "use-object-lineweight")),
        "Plot color:" => Some(("common", "plot-color")),
        "Use object color" => Some(("common", "use-object-color")),
        "Choose color…" => Some(("common", "choose-color")),
        "Reset" => Some(("common", "reset")),
        "Lineweight:" => Some(("common", "lineweight")),
        "Layers using ACI {selected_aci}" => Some(("common", "layers-using-aci")),
        "layer" => Some(("common", "layer-dac1d7")),
        "layers" => Some(("common", "layers-e3b816")),
        "No layers use this ACI in the current drawing." => Some(("common", "no-layers-use-this-aci-in-the-current-drawing")),
        "Block Palette" => Some(("common", "block-palette")),
        "Search blocks…" => Some(("common", "search-blocks")),
        "Drafting modes" => Some(("common", "drafting-modes")),
        "Grid display" => Some(("common", "grid-display")),
        "Grid snap" => Some(("common", "grid-snap")),
        "Polar tracking" => Some(("common", "polar-tracking")),
        "Object snap tracking" => Some(("common", "object-snap-tracking")),
        "Enable isometric drafting" => Some(("common", "enable-isometric-drafting")),
        "F5 cycles Left, Top, and Right." => Some(("common", "f5-cycles-left-top-and-right")),
        "Rotation: %{angle}°" => Some(("common", "rotation-67e334")),
        "Reset rotation" => Some(("common", "reset-rotation")),
        "Object snap modes" => Some(("common", "object-snap-modes")),
        "Enable object snap" => Some(("common", "enable-object-snap")),
        "Zero at" => Some(("common", "zero-at")),
        "degrees" => Some(("common", "degrees")),
        "Positive angles run clockwise" => Some(("common", "positive-angles-run-clockwise")),
        "Insertion scale" => Some(("common", "insertion-scale")),
        "Scales blocks and drawings inserted from elsewhere. Unitless inserts them unscaled." => Some(("common", "scales-blocks-and-drawings-inserted-from-elsewhere-unitless-inserts-them-unscaled")),
        "Sample output" => Some(("common", "sample-output")),
        "Geometric characteristic" => Some(("common", "geometric-characteristic")),
        "Tolerance values" => Some(("common", "tolerance-values")),
        "Datum" => Some(("common", "datum")),
        "Datum references" => Some(("common", "datum-references")),
        "Additional information" => Some(("common", "additional-information")),
        "Projected height" => Some(("common", "projected-height")),
        "Projected tolerance zone" => Some(("common", "projected-tolerance-zone")),
        "Datum identifier" => Some(("common", "datum-identifier")),
        "No standard loaded." => Some(("common", "no-standard-loaded")),
        "Map" => Some(("common", "map")),
        "Map same" => Some(("common", "map-same")),
        "Force objects to ByLayer" => Some(("common", "force-objects-to-bylayer")),
        "Write translation log" => Some(("common", "write-translation-log")),
        "Save mappings…" => Some(("common", "save-mappings")),
        "Load mappings…" => Some(("common", "load-mappings")),
        "Translate" => Some(("common", "translate")),
        "Translate from" => Some(("common", "translate-from")),
        "Translate to" => Some(("common", "translate-to")),
        "%{n} mapping(s)" => Some(("common", "mapping-s")),
        "Open .dwg and .dxf files with Open CAD Studio" => Some(("common", "open-dwg-and-dxf-files-with-open-cad-studio")),
        "Also installs the application and file-type icons the desktop shows." => Some(("common", "also-installs-the-application-and-file-type-icons-the-desktop-shows")),
        "Model Space Appearance" => Some(("common", "model-space-appearance")),
        "Restore Defaults" => Some(("common", "restore-defaults")),
        "Canvas mode" => Some(("common", "canvas-mode")),
        "Model background" => Some(("common", "model-background")),
        "Paper background" => Some(("common", "paper-background")),
        "Desk surround" => Some(("common", "desk-surround")),
        "Grid opacity" => Some(("common", "grid-opacity")),
        "Canvas background, grid, and default line colors automatically adapt to the active theme." => Some(("common", "canvas-background-grid-and-default-line-colors-automatically-adapt-to-the-active-them")),
        "Model space canvas remains locked to classic CAD dark charcoal (#212830)." => Some(("common", "model-space-canvas-remains-locked-to-classic-cad-dark-charcoal-212830")),
        "Custom background colors set above are applied to Model and Paper space." => Some(("common", "custom-background-colors-set-above-are-applied-to-model-and-paper-space")),
        "Crosshair" => Some(("common", "crosshair")),
        "Crosshair size" => Some(("common", "crosshair-size")),
        "Cursor type" => Some(("common", "cursor-type")),
        "Crosshair color" => Some(("common", "crosshair-color")),
        "Leave the color blank to keep automatic viewport contrast." => Some(("common", "leave-the-color-blank-to-keep-automatic-viewport-contrast")),
        "Model display scale" => Some(("common", "model-display-scale")),
        "Changes the on-screen width in Model without affecting plotted output." => Some(("common", "changes-the-on-screen-width-in-model-without-affecting-plotted-output")),
        "Selection" => Some(("common", "selection")),
        "Pick box size" => Some(("common", "pick-box-size")),
        "Controls both the visible selection box and the click aperture." => Some(("common", "controls-both-the-visible-selection-box-and-the-click-aperture")),
        "Visual Effect Settings" => Some(("common", "visual-effect-settings")),
        "Applications" => Some(("common", "applications")),
        "Installed plugins and their sources" => Some(("common", "installed-plugins-and-their-sources")),
        "Plugins…" => Some(("common", "plugins-2")),
        "Keyboard shortcuts" => Some(("common", "keyboard-shortcuts-2")),
        "Keyboard Shortcuts…" => Some(("common", "keyboard-shortcuts-3")),
        "Command aliases" => Some(("common", "command-aliases-2")),
        "Command Aliases…" => Some(("common", "command-aliases-3")),
        "File Safety" => Some(("common", "file-safety")),
        "Automatic save" => Some(("common", "automatic-save")),
        "Minutes between recovery saves to a .sv$ file; 0 turns it off (SAVETIME)." => Some(("common", "minutes-between-recovery-saves-to-a-sv-file-0-turns-it-off-savetime")),
        "Keep a .bak copy when overwriting a drawing (ISAVEBAK)" => Some(("common", "keep-a-bak-copy-when-overwriting-a-drawing-isavebak")),
        "Plotting" => Some(("common", "plotting")),
        "Plot device, paper, scale and plot styles" => Some(("common", "plot-device-paper-scale-and-plot-styles")),
        "Plot and Page Setup…" => Some(("common", "plot-and-page-setup")),
        "Fill TrueType glyphs (TEXTFILL)" => Some(("common", "fill-truetype-glyphs-textfill")),
        "Command Line" => Some(("common", "command-line")),
        "Prompt lines" => Some(("common", "prompt-lines")),
        "Temporary prompt lines shown above the command window (CLIPROMPTLINES)." => Some(("common", "temporary-prompt-lines-shown-above-the-command-window-clipromptlines")),
        "History fade time" => Some(("common", "history-fade-time")),
        "How long overlay history lines stay visible; 0 skips them (COMMANDLINEFADETIME)." => Some(("common", "how-long-overlay-history-lines-stay-visible-0-skips-them-commandlinefadetime")),
        "Clicking overlapping objects opens a picker" => Some(("common", "clicking-overlapping-objects-opens-a-picker")),
        "Block Edit" => Some(("common", "block-edit")),
        "Double-click to edit block in-place (REFEDIT)" => Some(("common", "double-click-to-edit-block-in-place-refedit")),
        "Double-click attributed blocks to edit attributes (ATTEDIT)" => Some(("common", "double-click-attributed-blocks-to-edit-attributes-attedit")),
        "User Preferences" => Some(("common", "user-preferences")),
        "Zoom" => Some(("common", "zoom")),
        "Reverse mouse wheel zoom (ZOOMWHEEL)" => Some(("common", "reverse-mouse-wheel-zoom-zoomwheel")),
        "Zoom factor" => Some(("common", "zoom-factor")),
        "How far one wheel notch zooms (ZOOMFACTOR)." => Some(("common", "how-far-one-wheel-notch-zooms-zoomfactor")),
        "Text and Dimensions" => Some(("common", "text-and-dimensions")),
        "TEXTEDIT edits one object and ends (TEXTEDITMODE)" => Some(("common", "textedit-edits-one-object-and-ends-texteditmode")),
        "Continued dimensions inherit the base dimension's layer and style (DIMCONTINUEMODE)" => Some(("common", "continued-dimensions-inherit-the-base-dimension-s-layer-and-style-dimcontinuemode")),
        "QDIM origin priority" => Some(("common", "qdim-origin-priority")),
        "Which points QDIM measures from. Also settable inside the command." => Some(("common", "which-points-qdim-measures-from-also-settable-inside-the-command")),
        "Add scales automatically" => Some(("common", "add-scales-automatically")),
        "Which annotative objects pick up a newly set annotation scale (ANNOAUTOSCALE)." => Some(("common", "which-annotative-objects-pick-up-a-newly-set-annotation-scale-annoautoscale")),
        "Length, angle and insertion units" => Some(("common", "length-angle-and-insertion-units")),
        "Drawing Units…" => Some(("common", "drawing-units-2")),
        "Drafting" => Some(("common", "drafting")),
        "Drafting rotation" => Some(("common", "drafting-rotation")),
        "Rotates the crosshair and the snap grid in the active UCS (SNAPANG)." => Some(("common", "rotates-the-crosshair-and-the-snap-grid-in-the-active-ucs-snapang")),
        "Polar tracking increment" => Some(("common", "polar-tracking-increment")),
        "Snap and Grid" => Some(("common", "snap-and-grid")),
        "Snap modes, grid spacing and object snap" => Some(("common", "snap-modes-grid-spacing-and-object-snap")),
        "Drafting Settings…" => Some(("common", "drafting-settings-2")),
        "3D Modeling" => Some(("common", "modeling-3d")),
        "Display Tools" => Some(("common", "display-tools")),
        "Show the navigation cube (NAVVCUBE)" => Some(("common", "show-the-navigation-cube-navvcube")),
        "Show the UCS icon (UCSICON)" => Some(("common", "show-the-ucs-icon-ucsicon")),
        "Place the UCS icon at the origin (UCSICON ORigin)" => Some(("common", "place-the-ucs-icon-at-the-origin-ucsicon-origin")),
        "Display Resolution" => Some(("common", "display-resolution")),
        "applies to the current drawing" => Some(("common", "applies-to-the-current-drawing")),
        "Isolines per surface" => Some(("common", "isolines-per-surface")),
        "Show silhouette edges on solids (DISPSILH)" => Some(("common", "show-silhouette-edges-on-solids-dispsilh")),
        "Surface density U" => Some(("common", "surface-density-u")),
        "Surface density V" => Some(("common", "surface-density-v")),
        "Surface type" => Some(("common", "surface-type")),
        "Record the history of composite solids (SOLIDHIST)" => Some(("common", "record-the-history-of-composite-solids-solidhist")),
        "Show solid history" => Some(("common", "show-solid-history")),
        "Not available" => Some(("common", "not-available")),
        "Open folder" => Some(("common", "open-folder")),
        "Where the application keeps its own files. These locations are fixed." => Some(("common", "where-the-application-keeps-its-own-files-these-locations-are-fixed")),
        "Configuration" => Some(("common", "configuration")),
        "Plot styles" => Some(("common", "plot-styles")),
        "Autosave files" => Some(("common", "autosave-files")),
        "Selection Modes" => Some(("common", "selection-modes")),
        "Use Shift to add to selection (PICKADD)" => Some(("common", "use-shift-to-add-to-selection-pickadd")),
        "Press and drag draws a rectangle instead of a lasso (PICKDRAG)" => Some(("common", "press-and-drag-draws-a-rectangle-instead-of-a-lasso-pickdrag")),
        "Show selection effect (SELECTIONEFFECT)" => Some(("common", "show-selection-effect-selectioneffect")),
        "Preview selection when no command is active" => Some(("common", "preview-selection-when-no-command-is-active")),
        "Preview selection during a command" => Some(("common", "preview-selection-during-a-command")),
        "Highlights the object under the cursor before it is picked (SELECTIONPREVIEW)." => Some(("common", "highlights-the-object-under-the-cursor-before-it-is-picked-selectionpreview")),
        "Object limit for grips" => Some(("common", "object-limit-for-grips")),
        "Unlimited" => Some(("common", "unlimited")),
        "Past this many selected objects no grips are drawn; 0 removes the limit (GRIPOBJLIMIT)." => Some(("common", "past-this-many-selected-objects-no-grips-are-drawn-0-removes-the-limit-gripobjlimit")),
        "Indicate selection area with transparent fill (SELECTIONAREA)" => Some(("common", "indicate-selection-area-with-transparent-fill-selectionarea")),
        "Selection area opacity" => Some(("common", "selection-area-opacity")),
        "Transparency of the window and crossing selection areas (SELECTIONAREAOPACITY)." => Some(("common", "transparency-of-the-window-and-crossing-selection-areas-selectionareaopacity")),
        "Window selection color" => Some(("common", "window-selection-color")),
        "Crossing selection color" => Some(("common", "crossing-selection-color")),
        "Selection highlight color" => Some(("common", "selection-highlight-color")),
        "Grip Settings" => Some(("common", "grip-settings")),
        "Grip size" => Some(("common", "grip-size")),
        "Unselected grip color" => Some(("common", "unselected-grip-color")),
        "Selected/hot grip color" => Some(("common", "selected-hot-grip-color")),
        "Hover grip color" => Some(("common", "hover-grip-color")),
        "Plot with plot styles" => Some(("common", "plot-with-plot-styles")),
        "Display plot styles" => Some(("common", "display-plot-styles")),
        "Edit…" => Some(("common", "edit")),
        "No paper layouts are available." => Some(("common", "no-paper-layouts-are-available")),
        "Default printer" => Some(("common", "default-printer")),
        "1 layout selected" => Some(("common", "value-1-layout-selected")),
        "layouts selected" => Some(("common", "layouts-selected")),
        "PDF" => Some(("common", "pdf")),
        "Select the layouts to output. Each page is printed in Layout mode." => Some(("common", "select-the-layouts-to-output-each-page-is-printed-in-layout-mode")),
        "Select all" => Some(("common", "select-all-1fc9a3")),
        "Select none" => Some(("common", "select-none")),
        "Printer" => Some(("common", "printer")),
        "Options…" => Some(("common", "options")),
        "Click + Add, press a key combination, type the command, then Apply. Esc cancels the pending row." => Some(("common", "click-add-press-a-key-combination-type-the-command-then-apply-esc-cancels-the-pending")),
        "Press a key combination..." => Some(("common", "press-a-key-combination")),
        "Click, then press keys..." => Some(("common", "click-then-press-keys")),
        "Cancel add (Esc)" => Some(("common", "cancel-add-esc")),
        "Number of shortcuts" => Some(("common", "number-of-shortcuts")),
        "Are you sure you want to reset? You will lose all your current shortcuts!" => Some(("common", "are-you-sure-you-want-to-reset-you-will-lose-all-your-current-shortcuts")),
        "Yes, reset" => Some(("common", "yes-reset")),
        "Reset to default" => Some(("common", "reset-to-default")),
        "Apply && Exit" => Some(("common", "apply-exit")),
        "Shortcut already used for command: {} → {}" => Some(("common", "shortcut-already-used-for-command")),
        "Unknown command: {}" => Some(("command", "unknown-command-cmd")),
        "Unsaved changes will be discarded." => Some(("common", "unsaved-changes-will-be-discarded")),
        "Discard && close" => Some(("common", "discard-close")),
        "Keep editing" => Some(("common", "keep-editing")),
        "MCP control is off" => Some(("common", "mcp-control-is-off")),
        "MCP is handling a request" => Some(("common", "mcp-is-handling-a-request")),
        "MCP control is ready" => Some(("common", "mcp-control-is-ready")),
        "Save All" => Some(("common", "save-all")),
        "Close All" => Some(("common", "close-all")),
        "Close All Other Drawings" => Some(("common", "close-all-other-drawings")),
        "Copy Full File Path" => Some(("common", "copy-full-file-path")),
        "Open File Location" => Some(("common", "open-file-location")),
        "[Style default]" => Some(("common", "style-default")),
        "Dynamic auto" => Some(("common", "dynamic-auto")),
        "Dynamic manual" => Some(("common", "dynamic-manual")),
        "(Any type)" => Some(("common", "any-type")),
        "(Any property)" => Some(("common", "any-property")),
        "No blocks in this drawing" => Some(("common", "no-blocks-in-this-drawing")),
        "No matches" => Some(("common", "no-matches")),
        "Profile of a surface" => Some(("common", "profile-of-a-surface")),
        "Profile of a line" => Some(("common", "profile-of-a-line")),
        "Circular runout" => Some(("common", "circular-runout")),
        "Total runout" => Some(("common", "total-runout")),
        "Maximum material condition" => Some(("common", "maximum-material-condition")),
        "Least material condition" => Some(("common", "least-material-condition")),
        "Regardless of feature size" => Some(("common", "regardless-of-feature-size")),
        "Decimal Degrees" => Some(("common", "decimal-degrees")),
        "Deg/Min/Sec" => Some(("common", "deg-min-sec-55d08d")),
        "Block\nPalette" => Some(("common", "block-palette-9925cd")),
        "Attach PDF" => Some(("common", "attach-pdf")),
        "No Leader" => Some(("common", "no-leader")),
        "/No Leader" => Some(("common", "no-leader-5e6b2a")),
        "/Leader" => Some(("common", "leader-c5dd1e")),
        "Landing first" => Some(("common", "landing-first")),
        "Select MText" => Some(("common", "select-mtext")),
        "Max points" => Some(("common", "max-points")),
        "First angle" => Some(("common", "first-angle")),
        "Second angle" => Some(("common", "second-angle")),
        "Keep boundaries: on" => Some(("common", "keep-boundaries-on")),
        "Keep boundaries: off" => Some(("common", "keep-boundaries-off")),
        "Associative: on" => Some(("common", "associative-on")),
        "Associative: off" => Some(("common", "associative-off")),
        "Separate hatches: on" => Some(("common", "separate-hatches-on")),
        "Separate hatches: off" => Some(("common", "separate-hatches-off")),
        "Recreate boundary" => Some(("common", "recreate-boundary")),
        "Separate hatches" => Some(("common", "separate-hatches")),
        "Draw front" => Some(("common", "draw-front")),
        "Draw back" => Some(("common", "draw-back")),
        "Edge: No extend" => Some(("common", "edge-no-extend")),
        "Cross sections only" => Some(("common", "cross-sections-only")),
        "Bulge magnitude" => Some(("common", "bulge-magnitude")),
        "First normal" => Some(("common", "first-normal")),
        "Last normal" => Some(("common", "last-normal")),
        "Ends normal" => Some(("common", "ends-normal")),
        "All normal" => Some(("common", "all-normal")),
        "Use draft angles" => Some(("common", "use-draft-angles")),
        "Wireframe 2D" => Some(("common", "wireframe-2d")),
        "Wireframe 3D" => Some(("common", "wireframe-3d")),
        "0: Theme Default" => Some(("common", "value-0-theme-default")),
        "7: White/Black" => Some(("common", "value-7-white-black")),
        "1: Red" => Some(("common", "value-1-red")),
        "2: Yellow" => Some(("common", "value-2-yellow")),
        "3: Green" => Some(("common", "value-3-green")),
        "4: Cyan" => Some(("common", "value-4-cyan")),
        "5: Blue" => Some(("common", "value-5-blue")),
        "6: Magenta" => Some(("common", "value-6-magenta")),
        "Visual style [Wireframe 2D/Wireframe 3D/Hidden Line/Flat Shaded/Gouraud Shaded/Flat Shaded + Edges/Gouraud Shaded + Edges]:" => Some(("common", "visual-style-wireframe-2d-wireframe-3d-hidden-line-flat-shaded-gouraud-shaded-flat-sh")),
        "Open CAD Studio Web App" => Some(("common", "open-cad-studio-web-app")),
        "Loading…" => Some(("common", "loading")),
        "A CAD application for 2D/3D drawing and design" => Some(("common", "a-cad-application-for-2d-3d-drawing-and-design")),
        "2D/3D CAD application for DWG and DXF drawings" => Some(("common", "value-2d-3d-cad-application-for-dwg-and-dxf-drawings")),
        "Create and edit technical drawings in DWG and DXF formats." => Some(("common", "create-and-edit-technical-drawings-in-dwg-and-dxf-formats")),
        "Launch Open CAD Studio" => Some(("common", "launch-open-cad-studio")),
        "Open CAD Studio Installer" => Some(("common", "open-cad-studio-installer")),
        "DWG Drawing" => Some(("common", "dwg-drawing")),
        "DXF Drawing" => Some(("common", "dxf-drawing")),
        "Desktop shortcut" => Some(("common", "desktop-shortcut")),
        "Add a shortcut to Open CAD Studio on the desktop." => Some(("common", "add-a-shortcut-to-open-cad-studio-on-the-desktop")),
        "Maximum" => Some(("common", "maximum")),
        "Pickbox" => Some(("common", "pickbox")),
        "Highlight" => Some(("common", "highlight")),
        "Grips" => Some(("common", "grips")),
        "Unselected" => Some(("common", "unselected")),
        "Selected" => Some(("common", "selected")),
        "Hover" => Some(("common", "hover")),
        "Shortcuts" => Some(("common", "shortcuts")),
        "Count" => Some(("common", "count")),
        "Profile" => Some(("common", "profile")),
        "Points" => Some(("common", "points")),
        "Keep boundaries" => Some(("common", "keep-boundaries")),
        "Black" => Some(("common", "black")),
        "Files" => Some(("common", "files")),
        "Specify" => Some(("common", "specify")),
        "Base" => Some(("common", "base")),
        "Tube" => Some(("common", "tube")),
        "Third point" => Some(("common", "third-point")),
        "Endpoint 1" => Some(("common", "endpoint-1")),
        "Endpoint 2" => Some(("common", "endpoint-2")),
        "Axis 1" => Some(("common", "axis-1")),
        "Axis 2" => Some(("common", "axis-2")),
        "Other endpoint" => Some(("common", "other-endpoint")),
        "Tangent object 1" => Some(("common", "tangent-object-1")),
        "Tangent object 2" => Some(("common", "tangent-object-2")),
        "First corner" => Some(("common", "first-corner")),
        "Other corner" => Some(("common", "other-corner")),
        "Start point" => Some(("common", "start-point")),
        "Next point" => Some(("common", "next-point")),
        "Tangent direction" => Some(("common", "tangent-direction")),
        "Fourth point" => Some(("common", "fourth-point")),
        "Create triangular face" => Some(("common", "create-triangular-face")),
        "Location" => Some(("common", "location")),
        "Creation mode" => Some(("common", "creation-mode")),
        "Path" => Some(("common", "path")),
        "Expression" => Some(("common", "expression")),
        "Reference length" => Some(("common", "reference-length")),
        "New length" => Some(("common", "new-length")),
        "Point end" => Some(("common", "point-end")),
        "End" => Some(("common", "end")),
        "Cross sections" => Some(("common", "cross-sections")),
        "Ruled" => Some(("common", "ruled")),
        "Smooth" => Some(("common", "smooth")),
        "Guides" => Some(("common", "guides")),
        "New origin" => Some(("common", "new-origin")),
        "Positive direction" => Some(("common", "positive-direction")),
        "TL" => Some(("common", "tl")),
        "Rotated" => Some(("common", "rotated")),
        "Landing" => Some(("common", "landing")),
        "Any" => Some(("common", "any")),
        "Source" => Some(("common", "source")),
        "Finish" => Some(("common", "finish")),
        "Next leader point" => Some(("common", "next-leader-point")),
        "Extension origin priority" => Some(("common", "extension-origin-priority")),
        "Endpoints" => Some(("common", "endpoints")),
        "Intersections" => Some(("common", "intersections")),
        "Distance between turns" => Some(("common", "distance-between-turns")),
        "New location" => Some(("common", "new-location")),
        "Center location override" => Some(("common", "center-location-override")),
        "Jog location" => Some(("common", "jog-location")),
        "Tint" => Some(("common", "tint")),
        "Shade" => Some(("common", "shade")),
        "Total" => Some(("common", "total")),
        "Overrides" => Some(("common", "overrides")),
        "Current" => Some(("common", "current")),
        "Margin" => Some(("common", "margin")),
        "Border" => Some(("common", "border")),
        "Backup" => Some(("common", "backup")),
        "Autosave" => Some(("common", "autosave")),
        "Load" => Some(("common", "load")),
        "Mappings" => Some(("common", "mappings")),
        "Image" => Some(("common", "image")),
        "Polyline arc segment" => Some(("common", "polyline-arc-segment")),
        "Partial arc" => Some(("common", "partial-arc")),
        "Continued dimension" => Some(("common", "continued-dimension")),
        "Island style" => Some(("common", "island-style")),
        "Internal points" => Some(("common", "internal-points")),
        "Polygon" => Some(("common", "polygon")),
        "Align" => Some(("common", "align")),
        "Draft angle" => Some(("common", "draft-angle")),
        "Magnitude" => Some(("common", "magnitude")),
        "Color family" => Some(("common", "color-family")),
        "Grayscale" => Some(("common", "grayscale")),
        "Convert" => Some(("common", "convert")),
        "Use object value" => Some(("common", "use-object-value")),
        "Grid" => Some(("common", "grid")),
        "Snap" => Some(("common", "snap")),
        "Sample" => Some(("common", "sample")),
        "Values" => Some(("common", "values")),
        "References" => Some(("common", "references")),
        "Projected" => Some(("common", "projected")),
        "Tolerance zone" => Some(("common", "tolerance-zone")),
        "Target" => Some(("common", "target")),
        "Appearance" => Some(("common", "appearance")),
        "Canvas" => Some(("common", "canvas")),
        "Cursor" => Some(("common", "cursor")),
        "Visual effects" => Some(("common", "visual-effects")),
        "Full file path" => Some(("common", "full-file-path")),
        "File location" => Some(("common", "file-location")),
        "Manual" => Some(("common", "manual")),
        "Property" => Some(("common", "property")),
        "First" => Some(("common", "first")),
        "Recreate" => Some(("common", "recreate")),
        "Separate" => Some(("common", "separate")),
        "No extend" => Some(("common", "no-extend")),
        "Ends" => Some(("common", "ends")),
        "Use" => Some(("common", "use")),
        "Installer" => Some(("common", "installer")),
        "Desktop" => Some(("common", "desktop")),
        "Shortcut" => Some(("common", "shortcut")),
        "Match Theme" => Some(("common", "match-theme")),
        "Classic CAD Dark" => Some(("common", "classic-cad-dark")),
        "Under" => Some(("common", "under")),
        "Current space" => Some(("common", "current-space")),
        "Current selection" => Some(("common", "current-selection")),
        "* Any value" => Some(("common", "any-value")),
        "= Equals" => Some(("common", "equals")),
        "!= Not equal" => Some(("common", "not-equal")),
        "> Greater than" => Some(("common", "greater-than")),
        "< Less than" => Some(("common", "less-than")),
        "Desktop pointer" => Some(("common", "desktop-pointer")),
        "Available themes: {}" => Some(("common", "available-themes")),
        "TOP" => Some(("common", "top")),
        "BOTTOM" => Some(("common", "bottom")),
        "FRONT" => Some(("common", "front")),
        "BACK" => Some(("common", "back")),
        "RIGHT" => Some(("common", "right")),
        "LEFT" => Some(("common", "left")),
        "Top Front" => Some(("common", "top-front")),
        "Top Back" => Some(("common", "top-back")),
        "Bot Front" => Some(("common", "bot-front")),
        "Bot Back" => Some(("common", "bot-back")),
        "Bot Right" => Some(("common", "bot-right")),
        "Bot Left" => Some(("common", "bot-left")),
        "Front Right" => Some(("common", "front-right")),
        "Front Left" => Some(("common", "front-left")),
        "Back Right" => Some(("common", "back-right")),
        "Back Left" => Some(("common", "back-left")),
        "Top Front Right" => Some(("common", "top-front-right")),
        "Top Front Left" => Some(("common", "top-front-left")),
        "Top Back Right" => Some(("common", "top-back-right")),
        "Top Back Left" => Some(("common", "top-back-left")),
        "Bot Front Right" => Some(("common", "bot-front-right")),
        "Bot Front Left" => Some(("common", "bot-front-left")),
        "Bot Back Right" => Some(("common", "bot-back-right")),
        "Bot Back Left" => Some(("common", "bot-back-left")),
        "No previous selection set." => Some(("common", "no-previous-selection-set")),
        "Nothing to select." => Some(("common", "nothing-to-select")),
        "No last object." => Some(("common", "no-last-object")),
        "MVIEW Object: select a closed paper-space circle, ellipse, or polyline." => Some(("common", "mview-object-select-a-closed-paper-space-circle-ellipse-or-polyline")),
        "CENTERREASSOCIATE: center mark associated." => Some(("common", "centerreassociate-center-mark-associated")),
        "CENTERREASSOCIATE: the selected source is not circular." => Some(("common", "centerreassociate-the-selected-source-is-not-circular")),
        "Command cancelled." => Some(("common", "command-cancelled")),
        "JOIN: objects don't form a single connected chain, or contain an unsupported type / tilted arc." => Some(("common", "join-objects-don-t-form-a-single-connected-chain-or-contain-an-unsupported-type-")),
        "WBLOCK  Select entities first, or: WBLOCK <block name>  or  WBLOCK *" => Some(("common", "wblock-select-entities-first-or-wblock-block-name-or-wblock")),
        "Usage: JUSTIFYTEXT <Left|Center|Right|Middle|TL|TC|TR|ML|MC|MR|BL|BC|BR>" => Some(("common", "usage-justifytext-left-center-right-middle-tl-tc-tr-ml-mc-mr-bl-bc-br")),
        "Usage: TEXTFIT <target width>   (fits selected text to that width)" => Some(("common", "usage-textfit-target-width-fits-selected-text-to-that-width")),
        "Usage: ARCTEXT <text>   (select an arc first; the text follows it)" => Some(("common", "usage-arctext-text-select-an-arc-first-the-text-follows-it")),
        "Limits checking ON." => Some(("common", "limits-checking-on")),
        "Limits checking OFF." => Some(("common", "limits-checking-off")),
        "Usage: SECTION [X|Y|Z] <value>   (cross-sections the selected solid)" => Some(("common", "usage-section-x-y-z-value-cross-sections-the-selected-solid")),
        "Usage: 3DALIGN <sx1 sy1 sz1 … sx3 sy3 sz3  dx1 dy1 dz1 … dx3 dy3 dz3>  (18 numbers: 3 source then 3 destination points)" => Some(("common", "usage-3dalign-sx1-sy1-sz1-sx3-sy3-sz3-dx1-dy1-dz1-dx3-dy3-dz3-18-numbers-3-sourc")),
        "Usage: 3DMIRROR [X|Y|Z]   (mirrors the selected solid across that plane)" => Some(("common", "usage-3dmirror-x-y-z-mirrors-the-selected-solid-across-that-plane")),
        "Usage: 3DROTATE [X|Y|Z] <angle>   (rotates the selected solid)" => Some(("common", "usage-3drotate-x-y-z-angle-rotates-the-selected-solid")),
        "Usage: SLICE [X|Y|Z] <value> [TOP|BOTTOM]   (cuts the selected solid)" => Some(("common", "usage-slice-x-y-z-value-top-bottom-cuts-the-selected-solid")),
        "PERF panel on — tracing render and interaction costs" => Some(("common", "perf-panel-on-tracing-render-and-interaction-costs")),
        "PERF panel off" => Some(("common", "perf-panel-off")),
        "ADDSELECTED: select an object first, then run ADDSELECTED to draw a new one like it." => Some(("common", "addselected-select-an-object-first-then-run-addselected-to-draw-a-new-one-like-i")),
        "Usage: DIMSTYLE LIST | NEW <name> | SET <name> <prop> <val>" => Some(("common", "usage-dimstyle-list-new-name-set-name-prop-val")),
        "LAYDEL: cannot delete the current layer. Make another layer current first." => Some(("common", "laydel-cannot-delete-the-current-layer-make-another-layer-current-first")),
        "LAYMRG: cannot merge the current layer. Make another layer current first." => Some(("common", "laymrg-cannot-merge-the-current-layer-make-another-layer-current-first")),
        "LAYERSTATE: no saved states. Use LAYERSTATE SAVE <name>." => Some(("common", "layerstate-no-saved-states-use-layerstate-save-name")),
        "Usage: COLOR <ByLayer|ByBlock|1-255|red|yellow|green|cyan|blue|magenta|white>" => Some(("common", "usage-color-bylayer-byblock-1-255-red-yellow-green-cyan-blue-magenta-white")),
        "Usage: CHPROP <prop> <val>  (props: LAYER COLOR LINETYPE LTSCALE)" => Some(("common", "usage-chprop-prop-val-props-layer-color-linetype-ltscale")),
        "SETVAR: LTSCALE CELTSCALE PDMODE PDSIZE TEXTSIZE ORTHOMODE FILLMODE MIRRTEXT FRAME IMAGEFRAME PDFFRAME WIPEOUTFRAME XCLIPFRAME POINTCLOUDCLIPFRAME ZOOMWHEEL ZOOMFACTOR CURSORSIZE PICKBOX CURSORTYPE SNAPANG TEXTFILL CLIPROMPTLINES COMMANDLINEFADETIME ATTREQ ATTDIA DIMASSOC DIMCONTINUEMODE ANGBASE ANGDIR SKETCHINC SKPOLY SKTOLERANCE DONUTID DONUTOD CENTEREXE CENTERLAYER CENTERLTYPE CENTERLTSCALE CENTERLTYPEFILE CENTERCROSSSIZE CENTERCROSSGAP CENTERMARKEXE COLORTHEME SELECTIONAREA SELECTIONAREAOPACITY SELECTIONEFFECT SELECTIONEFFECTCOLOR WINDOWSAREACOLOR CROSSINGAREACOLOR SELECTIONPREVIEW GRIPSIZE GRIPCOLOR GRIPHOT GRIPHOVER GRIPOBJLIMIT | CLAYER CELTYPE TEXTSTYLE (read-only)" => Some(("common", "setvar-ltscale-celtscale-pdmode-pdsize-textsize-orthomode-fillmode-mirrtext-fram")),
        "SETVAR: DIMCONTINUEMODE requires 0 or 1." => Some(("common", "setvar-dimcontinuemode-requires-0-or-1")),
        "SETVAR: DONUTID requires a finite value greater than or equal to zero." => Some(("common", "setvar-donutid-requires-a-finite-value-greater-than-or-equal-to-zero")),
        "SETVAR: DONUTOD requires a finite value greater than zero." => Some(("common", "setvar-donutod-requires-a-finite-value-greater-than-zero")),
        "Usage: PDMODE [value]  (0=dot 1=none 2=+ 3=x 4=tick; +32 circle, +64 square)" => Some(("common", "usage-pdmode-value-0-dot-1-none-2-3-x-4-tick-32-circle-64-square")),
        "FILEASSOC set to 1 — registered as a .dwg/.dxf/.bak handler" => Some(("common", "fileassoc-set-to-1-registered-as-a-dwg-dxf-bak-handler")),
        "Usage: PDSIZE [value]  (>0 absolute size, <0 percent of viewport, 0 default)" => Some(("common", "usage-pdsize-value-0-absolute-size-0-percent-of-viewport-0-default")),
        "Usage: CUIEXPORT <path> — save the keyboard shortcuts to a file." => Some(("common", "usage-cuiexport-path-save-the-keyboard-shortcuts-to-a-file")),
        "Usage: CUIIMPORT <path> — load keyboard shortcuts from a file." => Some(("common", "usage-cuiimport-path-load-keyboard-shortcuts-from-a-file")),
        "COLORSCHEME: 0 and 1 are COLORTHEME options. Enter a theme name (e.g. DARK, LIGHT, DRACULA) or use COLORTHEME." => Some(("common", "colorscheme-0-and-1-are-colortheme-options-enter-a-theme-name-e-g-dark-light-dra")),
        "VPORTS: unknown option. Use VPORTS 2H | 2V | 4 | SINGLE" => Some(("common", "vports-unknown-option-use-vports-2h-2v-4-single")),
        "SYNCPVIEWPORTS: select two or more viewports (the first is the master)." => Some(("common", "syncpviewports-select-two-or-more-viewports-the-first-is-the-master")),
        "Automation target document closed" => Some(("common", "automation-target-document-closed")),
        "Projection: Orthographic" => Some(("common", "projection-orthographic")),
        "Projection: Perspective" => Some(("common", "projection-perspective")),
        "Named plot style tables are not supported by the vector plotter." => Some(("common", "named-plot-style-tables-are-not-supported-by-the-vector-plotter")),
        "Disassociate" => Some(("common", "disassociate")),
        "Connected" => Some(("common", "connected")),
        "Absolute" => Some(("common", "absolute")),
        "Orthographic" => Some(("common", "orthographic")),
        "Solids" => Some(("common", "solids")),
        "Square" => Some(("common", "square")),
        "Tick" => Some(("common", "tick")),
        "Read-only" => Some(("common", "read-only")),
        "Paper Space" => Some(("common", "paper-space")),
        "Perspective" => Some(("common", "perspective")),
        "Dot" => Some(("common", "dot")),
        "Save layer mappings" => Some(("common", "save-layer-mappings")),
        "Load layer mappings" => Some(("common", "load-layer-mappings")),
        "OCS Web" => Some(("common", "ocs-web")),
        "OCS Desktop" => Some(("common", "ocs-desktop")),
        "A newer version of [ProductName] is already installed. Setup will now exit." => Some(("common", "newer-version-already-installed")),
        "Active: {}" => Some(("common", "active")),
        "Plot style: {}  ({} color overrides)" => Some(("common", "plot-style-color-overrides")),
        "Paper space '{}'" => Some(("common", "paper-space-2")),
        "SELHANDLES: {} selected in {}\n  Types: {}" => Some(("common", "selhandles-selected-in-types")),
        "\n  Blocks: {}" => Some(("common", "blocks-2")),
        "\n  Handles: {}" => Some(("common", "handles")),
        "from ({:.4},{:.4},{:.4}) to ({:.4},{:.4},{:.4})  len={:.4}" => Some(("common", "from-4-4-4-to-4-4-4-len-4")),
        "center ({:.4},{:.4},{:.4})  r={:.4}  area={:.4}" => Some(("common", "center-4-4-4-r-4-area-4")),
        "center ({:.4},{:.4},{:.4})  r={:.4}  start={:.2}° end={:.2}°" => Some(("common", "center-4-4-4-r-4-start-2-end-2")),
        "{} vertices  closed={}  elevation={:.4}" => Some(("common", "vertices-closed-elevation-4")),
        "\"{}\"  h={:.4}  at ({:.4},{:.4})" => Some(("common", "h-4-at-4-4")),
        "block=\"{}\"  at ({:.4},{:.4},{:.4})  scale=({:.4},{:.4},{:.4})  rot={:.2}°" => Some(("common", "block-at-4-4-4-scale-4-4-4-rot-2")),
        "{} ctrl pts  degree={}  closed={}" => Some(("common", "ctrl-pts-degree-closed")),
        "center ({:.4},{:.4})  major_len={:.4}  ratio={:.4}" => Some(("common", "center-4-4-major-len-4-ratio-4")),
        "{} vertices" => Some(("common", "vertices")),
        "{} ctrl pts" => Some(("common", "ctrl-pts")),
        "unexpected '{}'" => Some(("common", "unexpected")),
        "unexpected '{c}'" => Some(("common", "unexpected-c")),
        "bad number '{s}'" => Some(("common", "bad-number-s")),
        "{}  (h_margin:{:.2} v_margin:{:.2})" => Some(("common", "h-margin-2-v-margin-2")),
        "{}(txt:{:.2} asz:{:.2})" => Some(("common", "txt-2-asz-2")),
        "{} (font: {}, w: {:.2}, oblique: {:.1}°)" => Some(("common", "font-w-2-oblique-1")),
        "index {n}" => Some(("common", "index-n")),
        "{n_layers} layer(s)" => Some(("common", "n-layers-layer-s")),
        "{n_styles} text style(s)" => Some(("common", "n-styles-text-style-s")),
        "{n_lts} linetype(s)" => Some(("common", "n-lts-linetype-s")),
        "{n_blocks} block(s)" => Some(("common", "n-blocks-block-s")),
        "{n_sortents} stale draw-order table(s)" => Some(("common", "n-sortents-stale-draw-order-table-s")),
        "SETVAR: unknown variable \"{name}\"." => Some(("common", "setvar-unknown-variable-name")),
        "SAVETIME set to {v} minute(s)" => Some(("common", "savetime-set-to-v-minute-s")),
        "{} of {} — {}" => Some(("common", "of")),
        "Replaced 1 occurrence in {}; {remaining} matching object(s) remain." => Some(("common", "replaced-1-occurrence-in-remaining-matching-object-s-remain")),
        "Replaced {replaced} occurrence(s) in {} object(s)." => Some(("common", "replaced-replaced-occurrence-s-in-object-s")),
        "\"{search}\" was not found." => Some(("common", "search-was-not-found")),
        "handle {:X}" => Some(("common", "handle-x")),
        "block {:X}, text {:X}" => Some(("common", "block-x-text-x")),
        "block {:X}, attribute {}" => Some(("common", "block-x-attribute")),
        "Exported: {}" => Some(("common", "exported")),
        "Export failed: {e}" => Some(("common", "export-failed-e")),
        "Plotted window to {}" => Some(("common", "plotted-window-to")),
        "Plot failed: {e}" => Some(("common", "plot-failed-e")),
        "Layout '{name}' has no page setup." => Some(("common", "layout-name-has-no-page-setup")),
        "Layout '{name}' plot style table '{}' is not loaded." => Some(("common", "layout-name-plot-style-table-is-not-loaded")),
        "Layout '{name}' plot area is empty." => Some(("common", "layout-name-plot-area-is-empty")),
        "Exported {} layouts to {}" => Some(("common", "exported-layouts-to")),
        "Export failed: {error}" => Some(("common", "export-failed-error")),
        "Sent {} layouts to printer: {printer}" => Some(("common", "sent-layouts-to-printer-printer")),
        "Print failed: {error}" => Some(("common", "print-failed-error")),
        "Preview failed: {e}" => Some(("common", "preview-failed-e")),
        "{repo} is already in the catalog." => Some(("common", "repo-is-already-in-the-catalog")),
        "{repo} is already installed." => Some(("common", "repo-is-already-installed")),
        "Fetching releases for {repo}…" => Some(("common", "fetching-releases-for-repo")),
        "Repository added. {} installable release(s) found." => Some(("common", "repository-added-installable-release-s-found")),
        "Installing {repo} {tag}…" => Some(("common", "installing-repo-tag")),
        "Updating {repo} to {tag}…" => Some(("common", "updating-repo-to-tag")),
        "Installed '{id}'. Restart to load it." => Some(("common", "installed-id-restart-to-load-it")),
        "Install failed: {e}" => Some(("common", "install-failed-e")),
        "Uninstall failed: plugin '{id}' did not stop in time" => Some(("common", "uninstall-failed-plugin-id-did-not-stop-in-time")),
        "Uninstalled '{id}'." => Some(("common", "uninstalled-id")),
        "Uninstall failed: {e}" => Some(("common", "uninstall-failed-e")),
        "{from} -> {to}  ({moved} object(s))\n" => Some(("common", "from-to-moved-object-s")),
        "{layer}: skipped — {reason}\n" => Some(("common", "layer-skipped-reason")),
        "{lw:.2}mm (idx {})" => Some(("common", "lw-2-mm-idx")),
        "idx {}" => Some(("common", "idx")),
        "Color {n}" => Some(("common", "color-n")),
        "View: {name}" => Some(("common", "view-name")),
        "No plot style loaded." => Some(("common", "no-plot-style-loaded")),
        "No plot style table loaded." => Some(("common", "no-plot-style-table-loaded")),
        "Model space" => Some(("common", "model-space")),
        "The matching object is on a locked layer." => Some(("common", "the-matching-object-is-on-a-locked-layer")),
        "Enter text to find." => Some(("common", "enter-text-to-find")),
        "Enter a GitHub URL or repository in owner/repo format." => Some(("common", "enter-a-github-url-or-repository-in-owner-repo-format")),
        "DWGUNITS  Convert drawing to:" => Some(("common", "dwgunits-convert-drawing-to")),
        "Opened plot preview." => Some(("common", "opened-plot-preview")),
        "%{cmd}  Select objects or [Settings] (%{count} selected, Enter to apply):" => Some(("common", "select-objects-or-settings-selected-enter-to-apply")),
        "%{cmd}  Select objects or [Settings]:" => Some(("common", "select-objects-or-settings")),
        "+ Add parameter" => Some(("common", "add-parameter")),
        "3D Object Snap" => Some(("common", "object-snap-3d")),
        "3D Object Snap On (F4)" => Some(("common", "object-snap-on-f4-3d")),
        "3D Object Snap modes" => Some(("common", "object-snap-modes-3d")),
        "A numeric shell offset distance is required." => Some(("common", "a-numeric-shell-offset-distance-is-required")),
        "A selected edge no longer belongs to the body." => Some(("common", "a-selected-edge-no-longer-belongs-to-the-body")),
        "A selected face could not be resolved." => Some(("common", "a-selected-face-could-not-be-resolved")),
        "A selected face does not belong to the solid." => Some(("common", "a-selected-face-does-not-belong-to-the-solid")),
        "ALIGN  Scale objects based on alignment points? [Yes / No] <No>:" => Some(("common", "align-scale-objects-based-on-alignment-points-yes-no-no")),
        "ANNORESET: no selected object has alternate scale representations." => Some(("common", "annoreset-no-selected-object-has-alternate-scale-representations")),
        "ANNORESET: synchronized {} object(s) from the current scale." => Some(("common", "annoreset-synchronized-object-s-from-the-current-scale")),
        "Adaptive grid" => Some(("common", "adaptive-grid")),
        "Add Drawing Folder" => Some(("common", "add-drawing-folder")),
        "Add drawings…" => Some(("common", "add-drawings-2")),
        "Add folder…" => Some(("common", "add-folder")),
        "Add parameter" => Some(("common", "add-parameter-2")),
        "All other rows" => Some(("common", "all-other-rows")),
        "Allow selection cycling" => Some(("common", "allow-selection-cycling")),
        "Allow writing to source file" => Some(("common", "allow-writing-to-source-file")),
        "BREAK  Specify second break point or [First point]:" => Some(("common", "break-specify-second-break-point-or-first-point")),
        "Begin" => Some(("common", "begin")),
        "CHAMFEREDGE: select a base face edge." => Some(("common", "chamferedge-select-a-base-face-edge")),
        "Cannot delete beyond this." => Some(("common", "cannot-delete-beyond-this")),
        "Cell range" => Some(("common", "cell-range")),
        "Center of face" => Some(("common", "center-of-face")),
        "Choose output" => Some(("common", "choose-output")),
        "Clipboard access is unavailable. Press Ctrl+C or Command+C to copy the selected history." => Some(("common", "clipboard-access-is-unavailable-press-ctrl-c-or-command-c-to-copy-the-selected-history")),
        "Column & row settings" => Some(("common", "column-row-settings")),
        "Combine identical rows" => Some(("common", "combine-identical-rows")),
        "Constraint Settings" => Some(("common", "constraint-settings")),
        "Constraint Type" => Some(("common", "constraint-type")),
        "Copied" => Some(("common", "copied")),
        "Create a New Data Link" => Some(("common", "create-a-new-data-link")),
        "Create a new data extraction" => Some(("common", "create-a-new-data-extraction")),
        "Current drawing" => Some(("common", "current-drawing")),
        "Cursor-dependent position" => Some(("common", "cursor-dependent-position")),
        "DATAEXTRACTION  Specify insertion point:" => Some(("common", "dataextraction-specify-insertion-point")),
        "DATAEXTRACTION: external file created." => Some(("common", "dataextraction-external-file-created")),
        "DIMBREAK  Select dimension to add/remove break or [Multiple]:" => Some(("common", "dimbreak-select-dimension-to-add-remove-break-or-multiple")),
        "DIMBREAK  Select dimensions ({} selected, press Enter when done):" => Some(("common", "dimbreak-select-dimensions-selected-press-enter-when-done")),
        "DIMBREAK  Select object to break dimension or [Auto/Manual/Remove] <Auto>:" => Some(("common", "dimbreak-select-object-to-break-dimension-or-auto-manual-remove-auto")),
        "DIMBREAK  Specify first break point:" => Some(("common", "dimbreak-specify-first-break-point")),
        "DIMBREAK  Specify second break point:" => Some(("common", "dimbreak-specify-second-break-point")),
        "DIMBREAK: no editable dimensions were selected." => Some(("common", "dimbreak-no-editable-dimensions-were-selected")),
        "DIMBREAK: no intersections were found." => Some(("common", "dimbreak-no-intersections-were-found")),
        "DIMBREAK: removed breaks from {} dimension(s)." => Some(("common", "dimbreak-removed-breaks-from-dimension-s")),
        "DIMBREAK: select a dimension." => Some(("common", "dimbreak-select-a-dimension")),
        "DIMBREAK: updated {} dimension(s)." => Some(("common", "dimbreak-updated-dimension-s")),
        "DIMEDIT  Enter new dimension text <measured value>:" => Some(("common", "dimedit-enter-new-dimension-text-measured-value")),
        "DIMEDIT  Enter obliquing angle (press Enter for none):" => Some(("common", "dimedit-enter-obliquing-angle-press-enter-for-none")),
        "DIMEDIT  Enter type of dimension editing [Home/New/Rotate/Oblique] <Home>:" => Some(("common", "dimedit-enter-type-of-dimension-editing-home-new-rotate-oblique-home")),
        "DIMEDIT  Select objects:" => Some(("common", "dimedit-select-objects")),
        "DIMEDIT  Specify angle for dimension text:" => Some(("common", "dimedit-specify-angle-for-dimension-text")),
        "DIMEDIT: no editable dimensions were selected." => Some(("common", "dimedit-no-editable-dimensions-were-selected")),
        "DIMEDIT: updated {} dimension(s)." => Some(("common", "dimedit-updated-dimension-s")),
        "DIMJOGLINE  Select dimension to add jog or [Remove]:" => Some(("common", "dimjogline-select-dimension-to-add-jog-or-remove")),
        "DIMJOGLINE  Select dimension to remove jog:" => Some(("common", "dimjogline-select-dimension-to-remove-jog")),
        "DIMJOGLINE  Specify jog location (or press Enter):" => Some(("common", "dimjogline-specify-jog-location-or-press-enter")),
        "DIMJOGLINE: jog added." => Some(("common", "dimjogline-jog-added")),
        "DIMJOGLINE: jog removed." => Some(("common", "dimjogline-jog-removed")),
        "DIMJOGLINE: select a linear or aligned dimension." => Some(("common", "dimjogline-select-a-linear-or-aligned-dimension")),
        "DIMSPACE  Specify distance between dimensions or [Auto] <Auto>:" => Some(("common", "dimspace-specify-distance-between-dimensions-or-auto-auto")),
        "DIMSPACE: enter a non-negative spacing value or Auto." => Some(("common", "dimspace-enter-a-non-negative-spacing-value-or-auto")),
        "DIMSPACE: select a linear or aligned dimension." => Some(("common", "dimspace-select-a-linear-or-aligned-dimension")),
        "DIMSPACE: select one or more linear or aligned dimensions." => Some(("common", "dimspace-select-one-or-more-linear-or-aligned-dimensions")),
        "DIMSPACE: spacing value cannot be negative." => Some(("common", "dimspace-spacing-value-cannot-be-negative")),
        "DIMTEDIT  Specify angle for dimension text:" => Some(("common", "dimtedit-specify-angle-for-dimension-text")),
        "DIMTEDIT  Specify new location for dimension text or [Left/Right/Center/Home/Angle]:" => Some(("common", "dimtedit-specify-new-location-for-dimension-text-or-left-right-center-home-angle")),
        "DIMTEDIT: select a dimension." => Some(("common", "dimtedit-select-a-dimension")),
        "DIVIDE: {count} marker(s) placed." => Some(("common", "divide-marker-s-placed")),
        "DOF: {dof}" => Some(("common", "dof")),
        "DRAWORDER: selection reordered relative to reference objects." => Some(("common", "draworder-selection-reordered-relative-to-reference-objects")),
        "Data Extraction" => Some(("common", "data-extraction")),
        "Data Extraction Wizard" => Some(("common", "data-extraction-wizard")),
        "Data Link Manager" => Some(("common", "data-link-manager")),
        "Data extraction" => Some(("common", "data-extraction-2")),
        "Data link" => Some(("common", "data-link")),
        "Data link name" => Some(("common", "data-link-name")),
        "Data rows" => Some(("common", "data-rows")),
        "Define data source" => Some(("common", "define-data-source")),
        "Display Quick Properties palette on selection" => Some(("common", "display-quick-properties-palette-on-selection")),
        "Display Selection Cycling List Box" => Some(("common", "display-selection-cycling-list-box")),
        "Display coordinate input near crosshairs" => Some(("common", "display-coordinate-input-near-crosshairs")),
        "Display grid beyond Limits" => Some(("common", "display-grid-beyond-limits")),
        "Display selection candidate list box on click" => Some(("common", "display-selection-candidate-list-box-on-click")),
        "Distance and angle tolerances must be non-negative numbers." => Some(("common", "distance-and-angle-tolerances-must-be-non-negative-numbers")),
        "Distance1 = {:.4}, Distance2 = {:.4}" => Some(("common", "distance1-distance2")),
        "Draw section" => Some(("common", "draw-section")),
        "Drawing table" => Some(("common", "drawing-table")),
        "Drawings / folders" => Some(("common", "drawings-folders")),
        "Dynamic Prompts" => Some(("common", "dynamic-prompts")),
        "Edit an existing data extraction" => Some(("common", "edit-an-existing-data-extraction")),
        "Editing weighted or tolerance-fitted interpolation data is not supported." => Some(("common", "editing-weighted-or-tolerance-fitted-interpolation-data-is-not-supported")),
        "Empty table" => Some(("common", "empty-table")),
        "Enable Pointer Input (F12)" => Some(("common", "enable-pointer-input-f12")),
        "Enable dimension input fields" => Some(("common", "enable-dimension-input-fields")),
        "Enter a body editing option [Shell/eXit]:" => Some(("common", "enter-a-body-editing-option-shell-exit")),
        "Enter a solid editing option [Body/eXit]:" => Some(("common", "enter-a-solid-editing-option-body-exit")),
        "Entire sheet" => Some(("common", "entire-sheet")),
        "Equal X and Y spacing" => Some(("common", "equal-x-and-y-spacing")),
        "External file" => Some(("common", "external-file")),
        "Extraction settings" => Some(("common", "extraction-settings")),
        "FILLET  Select 2D polyline  [R={:.4}]:" => Some(("common", "fillet-select-2d-polyline-r")),
        "FILLET  Select first object or [Polyline/Radius]  [R={:.4}]:" => Some(("common", "fillet-select-first-object-or-polyline-radius-r")),
        "FILLET  Specify fillet radius or first point <{:.4}>:" => Some(("common", "fillet-specify-fillet-radius-or-first-point")),
        "FILLET  Specify second point for radius:" => Some(("common", "fillet-specify-second-point-for-radius")),
        "File" => Some(("common", "file")),
        "File not found — check the saved path." => Some(("common", "file-not-found-check-the-saved-path")),
        "First row" => Some(("common", "first-row")),
        "Fit data cannot be purged without a stored control curve." => Some(("common", "fit-data-cannot-be-purged-without-a-stored-control-curve")),
        "Fit data does not define a valid control curve." => Some(("common", "fit-data-does-not-define-a-valid-control-curve")),
        "Fit points do not define a valid spline." => Some(("common", "fit-points-do-not-define-a-valid-spline")),
        "Formula" => Some(("common", "formula")),
        "Full path" => Some(("common", "full-path")),
        "Fully constrained — no remaining degrees of freedom" => Some(("common", "fully-constrained-no-remaining-degrees-of-freedom")),
        "Grid On (F7)" => Some(("common", "grid-on-f7")),
        "Grid X spacing:" => Some(("common", "grid-x-spacing")),
        "Grid Y spacing:" => Some(("common", "grid-y-spacing")),
        "Grid behavior" => Some(("common", "grid-behavior")),
        "Grid spacing" => Some(("common", "grid-spacing")),
        "HATCHEDIT  Pattern:%{name}  Scale:%{scale}  Angle:%{angle}  [Style/Origin/Properties/COlor/LAyer/Transparency/DRaw order/ASsociate/DIsassociate/ANnotative/recreate Boundary/separate Hatches] <Properties>:" => Some(("common", "hatchedit-pattern-scale-angle-style-origin-properties-color-layer-transparency-draw-order-associate-disassociate-annotative-recreate-boundary-separate-hatches-properties")),
        "INTERSECT: created %{count} result object(s)." => Some(("common", "intersect-created-result-object-s")),
        "INTERSECT: no positive-area common result; %{count} original object(s) retained." => Some(("common", "intersect-no-positive-area-common-result-original-object-s-retained")),
        "INTERSECT: select at least two solids, Regions, or coplanar Surfaces of a compatible type." => Some(("common", "intersect-select-at-least-two-solids-regions-or-coplanar-surfaces-of-a-compatible-type")),
        "INTERSECT: the retained object could not be updated." => Some(("common", "intersect-the-retained-object-could-not-be-updated")),
        "INTERSECT: the selected coincident geometry is ambiguous." => Some(("common", "intersect-the-selected-coincident-geometry-is-ambiguous")),
        "INTERSECT: the selected objects do not have a supported coplanar surface intersection." => Some(("common", "intersect-the-selected-objects-do-not-have-a-supported-coplanar-surface-intersection")),
        "INTERSECT: the selected topology could not be intersected safely." => Some(("common", "intersect-the-selected-topology-could-not-be-intersected-safely")),
        "Include current drawing" => Some(("common", "include-current-drawing")),
        "Include subfolders" => Some(("common", "include-subfolders")),
        "Increment angle:" => Some(("common", "increment-angle")),
        "Indicator Fill Color" => Some(("common", "indicator-fill-color")),
        "Indicator Transparency" => Some(("common", "indicator-transparency")),
        "Insert Table" => Some(("common", "insert-table")),
        "Insert data extraction table into drawing" => Some(("common", "insert-data-extraction-table-into-drawing")),
        "Insert options" => Some(("common", "insert-options")),
        "Insert table after saving link" => Some(("common", "insert-table-after-saving-link")),
        "Insertion behavior" => Some(("common", "insertion-behavior")),
        "Keep table updated to source formatting" => Some(("common", "keep-table-updated-to-source-formatting")),
        "Knot" => Some(("common", "knot")),
        "LEADER  Enter an annotation option [None/Mtext]:" => Some(("common", "leader-enter-an-annotation-option-none-mtext")),
        "LEADER  Enter first line of annotation text or <options>:" => Some(("common", "leader-enter-first-line-of-annotation-text-or-options")),
        "LEADER  Enter leader formatting option [Spline/Straight/Arrow/None] <exit>:" => Some(("common", "leader-enter-leader-formatting-option-spline-straight-arrow-none-exit")),
        "LEADER  Enter next line of annotation text:" => Some(("common", "leader-enter-next-line-of-annotation-text")),
        "LEADER  Specify leader start point:" => Some(("common", "leader-specify-leader-start-point")),
        "LEADER  Specify next point or [Annotation/Format/Undo] <Annotation>:" => Some(("common", "leader-specify-next-point-or-annotation-format-undo-annotation")),
        "LEADER  Specify next point:" => Some(("common", "leader-specify-next-point")),
        "LENGTHEN  Select an object to change or [Undo]:" => Some(("common", "lengthen-select-an-object-to-change-or-undo")),
        "LENGTHEN  Select an object to measure or [Delta/Percent/Total/Dynamic]:" => Some(("common", "lengthen-select-an-object-to-measure-or-delta-percent-total-dynamic")),
        "LOFT  Enter an option [Guides/Path/Cross sections only/Settings/Continuity/Bulge magnitude] <Cross sections only>:" => Some(("common", "loft-enter-an-option-guides-path-cross-sections-only-settings-continuity-bulge-magnitude-cross-sections-only")),
        "LOFT  Enter an option [Guides/Path/Cross sections only/Settings] <Cross sections only>:" => Some(("common", "loft-enter-an-option-guides-path-cross-sections-only-settings-cross-sections-only")),
        "LOFT  Select cross-sections in order or [Point/Join/Mode] (Enter to finish)" => Some(("common", "loft-select-cross-sections-in-order-or-point-join-mode-enter-to-finish")),
        "Link option" => Some(("common", "link-option")),
        "Link settings" => Some(("common", "link-settings")),
        "Live Section Enabled" => Some(("common", "live-section-enabled")),
        "Ltype gen" => Some(("common", "ltype-gen")),
        "MEASURE: 0 markers placed." => Some(("common", "measure-0-markers-placed")),
        "MEASURE: {count} marker(s) placed." => Some(("common", "measure-marker-s-placed")),
        "Maintain associativity" => Some(("common", "maintain-associativity")),
        "Major line every:" => Some(("common", "major-line-every")),
        "Midpoint on edge" => Some(("common", "midpoint-on-edge")),
        "Moment of inertia" => Some(("common", "moment-of-inertia")),
        "More options" => Some(("common", "more-options")),
        "Move Down" => Some(("common", "move-down")),
        "Move Up" => Some(("common", "move-up")),
        "Named Parameters" => Some(("common", "named-parameters")),
        "Named range" => Some(("common", "named-range")),
        "Nearest to face" => Some(("common", "nearest-to-face")),
        "No path" => Some(("common", "no-path")),
        "No preview available." => Some(("common", "no-preview-available")),
        "No surfaces selected." => Some(("common", "no-surfaces-selected")),
        "OBJECTSCALE: the selected objects already have the current scale, or do not support annotation scales." => Some(("common", "objectscale-the-selected-objects-already-have-the-current-scale-or-do-not-support-annotation-scales")),
        "OBJECTSCALE: the selected objects do not have the current scale." => Some(("common", "objectscale-the-selected-objects-do-not-have-the-current-scale")),
        "OBJECTSCALE: {} the current scale on {} object(s)." => Some(("common", "objectscale-the-current-scale-on-object-s")),
        "Object Snap On (F3)" => Some(("common", "object-snap-on-f3")),
        "Object Snap Tracking On (F11)" => Some(("common", "object-snap-tracking-on-f11")),
        "Object Snap modes" => Some(("common", "object-snap-modes-2")),
        "On by default. Turn off to show just the constraint glyph in the viewport — enough to see that a constraint is present — without the driven value or named parameter text covering nearby geometry." => Some(("common", "on-by-default-turn-off-to-show-just-the-constraint-glyph-in-the-viewport-enough-to-see-that-a-constraint-is-present-without-the-driven-value-or-named-parameter-text-covering-nearby-geometry")),
        "One or more parametric constraints conflict or are redundant\nClick to remove one and re-solve" => Some(("common", "one-or-more-parametric-constraints-conflict-or-are-redundant-click-to-remove-one-and-re-solve")),
        "Ortho mode (F8)" => Some(("common", "ortho-mode-f8")),
        "Output data to external file" => Some(("common", "output-data-to-external-file")),
        "Output file" => Some(("common", "output-file")),
        "PEDIT  Convert lines and arcs to polylines [Yes/No] <Yes>:" => Some(("common", "pedit-convert-lines-and-arcs-to-polylines-yes-no-yes")),
        "PEDIT  Enter polyline linetype generation option [ON/OFF]:" => Some(("common", "pedit-enter-polyline-linetype-generation-option-on-off")),
        "PEDIT  Select polyline (or a line/arc to convert) or [Multiple]:" => Some(("common", "pedit-select-polyline-or-a-line-arc-to-convert-or-multiple")),
        "Palette Location" => Some(("common", "palette-location")),
        "Parameter '{}' already exists." => Some(("common", "parameter-already-exists")),
        "Parameter '{}': {}" => Some(("common", "parameter")),
        "Parameters" => Some(("common", "parameters")),
        "Perpendicular objects must share an intersection point" => Some(("common", "perpendicular-objects-must-share-an-intersection-point")),
        "Perpendicular to face" => Some(("common", "perpendicular-to-face")),
        "Plane" => Some(("common", "plane")),
        "Pointer Input" => Some(("common", "pointer-input")),
        "Polar Angle Settings" => Some(("common", "polar-angle-settings")),
        "Polar Tracking On (F10)" => Some(("common", "polar-tracking-on-f10")),
        "Polar Tracking guides cursor movement along specified angles. Ortho mode constrains movement to orthogonal axes." => Some(("common", "polar-tracking-guides-cursor-movement-along-specified-angles-ortho-mode-constrains-movement-to-orthogonal-axes")),
        "Press Enter to accept the chamfer or [Distance]:" => Some(("common", "press-enter-to-accept-the-chamfer-or-distance")),
        "Principal directions" => Some(("common", "principal-directions")),
        "Principal moments" => Some(("common", "principal-moments")),
        "Priority" => Some(("common", "priority")),
        "Product of inertia" => Some(("common", "product-of-inertia")),
        "REVERSE  Select line, polyline, spline or helix to reverse:" => Some(("common", "reverse-select-line-polyline-spline-or-helix-to-reverse")),
        "Radii of gyration" => Some(("common", "radii-of-gyration")),
        "Range" => Some(("common", "range")),
        "Recent Colors" => Some(("common", "recent-colors")),
        "Reference changes are not available on web — the reference list is read-only." => Some(("common", "reference-changes-are-not-available-on-web-the-reference-list-is-read-only")),
        "Refine data" => Some(("common", "refine-data")),
        "Relative path" => Some(("common", "relative-path")),
        "Remaining degrees of freedom in the current parametric constraint scope" => Some(("common", "remaining-degrees-of-freedom-in-the-current-parametric-constraint-scope")),
        "Requires an integer between 0 and 99." => Some(("common", "requires-an-integer-between-0-and-99")),
        "Requires numeric distance or two points." => Some(("common", "requires-numeric-distance-or-two-points")),
        "SECTIONPLANE  Align section to [Front/bAck/Top/Bottom/Left/Right] <Top>:" => Some(("common", "sectionplane-align-section-to-front-back-top-bottom-left-right-top")),
        "SECTIONPLANE  Enter section plane type [Plane/Slice/Boundary/Volume] <Plane>:" => Some(("common", "sectionplane-enter-section-plane-type-plane-slice-boundary-volume-plane")),
        "SECTIONPLANE  Specify next point or ENTER to complete:" => Some(("common", "sectionplane-specify-next-point-or-enter-to-complete")),
        "SECTIONPLANE  Specify next point:" => Some(("common", "sectionplane-specify-next-point")),
        "SECTIONPLANE  Specify point in direction of section view:" => Some(("common", "sectionplane-specify-point-in-direction-of-section-view")),
        "SECTIONPLANE  Specify start point:" => Some(("common", "sectionplane-specify-start-point")),
        "SECTIONPLANE  Specify through point:" => Some(("common", "sectionplane-specify-through-point")),
        "SETBYLAYER: no properties required changes." => Some(("common", "setbylayer-no-properties-required-changes")),
        "SETBYLAYER: reset {} entity/entities to ByLayer." => Some(("common", "setbylayer-reset-entity-entities-to-bylayer")),
        "SETVAR: CETRANSPARENCY LTSCALE CELTSCALE PDMODE PDSIZE TEXTSIZE ORTHOMODE FILLMODE MIRRTEXT FRAME IMAGEFRAME PDFFRAME WIPEOUTFRAME XCLIPFRAME POINTCLOUDCLIPFRAME ZOOMWHEEL ZOOMFACTOR SHORTCUTMENU SHORTCUTMENUDURATION CURSORSIZE PICKBOX CURSORTYPE SNAPANG TEXTFILL CLIPROMPTLINES COMMANDLINEFADETIME ATTREQ ATTDIA DIMASSOC DIMCONTINUEMODE CONSTRAINTSOLVEMODE CONSTRAINTINFER CONSTRAINTBARDISPLAY ANGBASE ANGDIR SKETCHINC SKPOLY SKTOLERANCE DONUTID DONUTOD CENTEREXE CENTERLAYER CENTERLTYPE CENTERLTSCALE CENTERLTYPEFILE CENTERCROSSSIZE CENTERCROSSGAP CENTERMARKEXE COLORTHEME SELECTIONAREA SELECTIONAREAOPACITY SELECTIONEFFECT SELECTIONEFFECTCOLOR WINDOWSAREACOLOR CROSSINGAREACOLOR SELECTIONPREVIEW GRIPSIZE GRIPCOLOR GRIPHOT GRIPHOVER GRIPOBJLIMIT | CLAYER CELTYPE TEXTSTYLE (read-only)" => Some(("common", "setvar-cetransparency-ltscale-celtscale-pdmode-pdsize-textsize-orthomode-fillmode-mirrtext-frame-imageframe-pdfframe-wipeoutframe-xclipframe-pointcloudclipframe-zoomwheel-zoomfactor-cursorsize-pickbox-cursortype-snapang-textfill-clipromptlines-commandlinefadetime-attreq-attdia-dimassoc-dimcontinuemode-constraintsolvemode-constraintinfer-constraintbardisplay-angbase-angdir-sketchinc-skpoly-sktolerance-donutid-donutod-centerexe-centerlayer-centerltype-centerltscale-centerltypefile-centercrosssize-centercrossgap-centermarkexe-colortheme-selectionarea-selectionareaopacity-selectioneffect-selectioneffectcolor-windowsareacolor-crossingareacolor-selectionpreview-gripsize-gripcolor-griphot-griphover-gripobjlimit-clayer-celtype-textstyle-read-only")),
        "SHELL supports rectangular boxes, circular cylinders, and spheres." => Some(("common", "shell-supports-rectangular-boxes-circular-cylinders-and-spheres")),
        "SHELL: solid updated." => Some(("common", "shell-solid-updated")),
        "SPLINEDIT  Fit data [Add/Delete/Move/Purge/Tangents/eXit] <eXit>:" => Some(("common", "splinedit-fit-data-add-delete-move-purge-tangents-exit-exit")),
        "SPLINEDIT  Fit data [Add/Delete/Move/Purge/eXit] <eXit>:" => Some(("common", "splinedit-fit-data-add-delete-move-purge-exit-exit")),
        "SPLINEDIT  Select any open curves to join to source:" => Some(("common", "splinedit-select-any-open-curves-to-join-to-source")),
        "SPLINEDIT  Specify a point on the spline <exit>:" => Some(("common", "splinedit-specify-a-point-on-the-spline-exit")),
        "SPLINEDIT  Specify control vertex to delete:" => Some(("common", "splinedit-specify-control-vertex-to-delete")),
        "SPLINEDIT  Specify control vertex:" => Some(("common", "splinedit-specify-control-vertex")),
        "SPLINEDIT  Specify end tangent or [System default]:" => Some(("common", "splinedit-specify-end-tangent-or-system-default")),
        "SPLINEDIT  Specify existing fit point on spline <exit>:" => Some(("common", "splinedit-specify-existing-fit-point-on-spline-exit")),
        "SPLINEDIT  Specify new fit point to add <exit>:" => Some(("common", "splinedit-specify-new-fit-point-to-add-exit")),
        "SPLINEDIT  Specify new location or [Next/Previous/Select point/eXit] <Next>:" => Some(("common", "splinedit-specify-new-location-or-next-previous-select-point-exit-next")),
        "SPLINEDIT  Specify new point or [After/Before] <exit>:" => Some(("common", "splinedit-specify-new-point-or-after-before-exit")),
        "SPLINEDIT  Specify precision 0-99 <10> (straight segments):" => Some(("common", "splinedit-specify-precision-0-99-10-straight-segments")),
        "SPLINEDIT  Specify start tangent or [System default]:" => Some(("common", "splinedit-specify-start-tangent-or-system-default")),
        "SPLINEDIT  [Add/Delete/Elevate order/Move/Weight/eXit] <eXit>:" => Some(("common", "splinedit-add-delete-elevate-order-move-weight-exit-exit")),
        "SPLINEDIT  [Close/Join/Move vertex/Refine/rEverse/convert to Polyline/Undo/eXit] <eXit>:" => Some(("common", "splinedit-close-join-move-vertex-refine-reverse-convert-to-polyline-undo-exit-exit")),
        "SPLINEDIT  [Fit data/Close/Join/Move vertex/Refine/rEverse/convert to Polyline/Undo/eXit] <eXit>:" => Some(("common", "splinedit-fit-data-close-join-move-vertex-refine-reverse-convert-to-polyline-undo-exit-exit")),
        "SPLINEDIT  [Fit data/Open/Move vertex/Refine/rEverse/convert to Polyline/Undo/eXit] <eXit>:" => Some(("common", "splinedit-fit-data-open-move-vertex-refine-reverse-convert-to-polyline-undo-exit-exit")),
        "SPLINEDIT  [Open/Move vertex/Refine/rEverse/convert to Polyline/Undo/eXit] <eXit>:" => Some(("common", "splinedit-open-move-vertex-refine-reverse-convert-to-polyline-undo-exit-exit")),
        "SUBTRACT  Convert selected closed Mesh objects to solids? [Yes/No] <Yes>:" => Some(("common", "subtract-convert-selected-closed-mesh-objects-to-solids-yes-no-yes")),
        "SUBTRACT  Select Solids, Regions, Surfaces, or Meshes to subtract, then press Enter:" => Some(("common", "subtract-select-solids-regions-surfaces-or-meshes-to-subtract-then-press-enter")),
        "SUBTRACT  Select base Solids, Regions, Surfaces, or Meshes, then press Enter:" => Some(("common", "subtract-select-base-solids-regions-surfaces-or-meshes-then-press-enter")),
        "SUBTRACT: a selected Mesh is not a supported closed single-shell mesh; no object was changed." => Some(("common", "subtract-a-selected-mesh-is-not-a-supported-closed-single-shell-mesh-no-object-was-changed")),
        "SUBTRACT: created %{count} result object(s)." => Some(("common", "subtract-created-result-object-s")),
        "SUBTRACT: no compatible base and cutter types or planes were selected." => Some(("common", "subtract-no-compatible-base-and-cutter-types-or-planes-were-selected")),
        "SUBTRACT: select at least one base and one cutter Solid, Region, or Surface." => Some(("common", "subtract-select-at-least-one-base-and-one-cutter-solid-region-or-surface")),
        "SUBTRACT: the retained base object could not be updated." => Some(("common", "subtract-the-retained-base-object-could-not-be-updated")),
        "SUBTRACT: the selected coincident geometry is ambiguous." => Some(("common", "subtract-the-selected-coincident-geometry-is-ambiguous")),
        "SUBTRACT: the selected geometry includes an unsupported surface intersection." => Some(("common", "subtract-the-selected-geometry-includes-an-unsupported-surface-intersection")),
        "SUBTRACT: the selected topology could not be cut safely." => Some(("common", "subtract-the-selected-topology-could-not-be-cut-safely")),
        "Second row" => Some(("common", "second-row")),
        "Section Plane" => Some(("common", "section-plane")),
        "Section Plane Offset" => Some(("common", "section-plane-offset")),
        "Select a 3D solid or surface edge." => Some(("common", "select-a-3d-solid-or-surface-edge")),
        "Select a 3D solid." => Some(("common", "select-a-3d-solid")),
        "Select a 3D solid:" => Some(("common", "select-a-3d-solid-2")),
        "Select a data link or create a new one." => Some(("common", "select-a-data-link-or-create-a-new-one")),
        "Select an edge or [Loop/Distance]:" => Some(("common", "select-an-edge-or-loop-distance")),
        "Select edge of loop or [Edge/Distance]:" => Some(("common", "select-edge-of-loop-or-edge-distance")),
        "Select face or any point to locate section line or [Draw section/Orthographic/Type]:" => Some(("common", "select-face-or-any-point-to-locate-section-line-or-draw-section-orthographic-type")),
        "Select faces to add [Undo/Remove/ALL] <done>:" => Some(("common", "select-faces-to-add-undo-remove-all-done")),
        "Select faces to remove [Undo/Add/ALL] <done>:" => Some(("common", "select-faces-to-remove-undo-add-all-done")),
        "Select objects in the current drawing" => Some(("common", "select-objects-in-the-current-drawing")),
        "Select properties" => Some(("common", "select-properties")),
        "Select spline-fit polylines:" => Some(("common", "select-spline-fit-polylines")),
        "Select surfaces to thicken:" => Some(("common", "select-surfaces-to-thicken")),
        "Selected objects in current drawing" => Some(("common", "selected-objects-in-current-drawing")),
        "Set cell styles" => Some(("common", "set-cell-styles")),
        "Sheet" => Some(("common", "sheet")),
        "Show associativity" => Some(("common", "show-associativity")),
        "Show command prompting and command input near crosshairs" => Some(("common", "show-command-prompting-and-command-input-near-crosshairs")),
        "Show count column" => Some(("common", "show-count-column")),
        "Show cycling badge when objects overlap" => Some(("common", "show-cycling-badge-when-objects-overlap")),
        "Show name column" => Some(("common", "show-name-column")),
        "Show values and parameter names on constraint markers" => Some(("common", "show-values-and-parameter-names-on-constraint-markers")),
        "Slice" => Some(("common", "slice")),
        "Slice Depth" => Some(("common", "slice-depth")),
        "Snap On (F9)" => Some(("common", "snap-on-f9")),
        "Snap X spacing:" => Some(("common", "snap-x-spacing")),
        "Snap Y spacing:" => Some(("common", "snap-y-spacing")),
        "Snap spacing" => Some(("common", "snap-spacing")),
        "Snap type" => Some(("common", "snap-type")),
        "Specify Distance1 or [Expression] <{:.4}>:" => Some(("common", "specify-distance1-or-expression")),
        "Specify Distance2 or [Expression] <{:.4}>:" => Some(("common", "specify-distance2-or-expression")),
        "Specify insertion point" => Some(("common", "specify-insertion-point")),
        "Specify point or enter arc length:" => Some(("common", "specify-point-or-enter-arc-length")),
        "Specify point or enter radius:" => Some(("common", "specify-point-or-enter-radius")),
        "Specify replacement path: XREF Path Find <old> <new>" => Some(("common", "specify-replacement-path-xref-path-find-old-new")),
        "Specify second point:" => Some(("common", "specify-second-point")),
        "Specify the shell offset distance <{:.3}>:" => Some(("common", "specify-the-shell-offset-distance")),
        "Specify thickness" => Some(("common", "specify-thickness")),
        "Specify window" => Some(("common", "specify-window")),
        "Spline cannot be converted within the requested precision." => Some(("common", "spline-cannot-be-converted-within-the-requested-precision")),
        "Spreadsheet Links" => Some(("common", "spreadsheet-links")),
        "Start from data extraction" => Some(("common", "start-from-data-extraction")),
        "Start from data link" => Some(("common", "start-from-data-link")),
        "Start from empty table" => Some(("common", "start-from-empty-table")),
        "State2" => Some(("common", "state2")),
        "Static quadrant location" => Some(("common", "static-quadrant-location")),
        "Status: Linked" => Some(("common", "status-linked")),
        "Status: Source not found" => Some(("common", "status-source-not-found")),
        "Surface Associativity" => Some(("common", "surface-associativity")),
        "Surface Type" => Some(("common", "surface-type-2")),
        "THICKEN: created {} solid(s); {} surface(s) could not be thickened exactly." => Some(("common", "thicken-created-solid-s-surface-s-could-not-be-thickened-exactly")),
        "Tab-separated text" => Some(("common", "tab-separated-text")),
        "Tangent objects must share an intersection point" => Some(("common", "tangent-objects-must-share-an-intersection-point")),
        "Tangent point must differ from the fit endpoint." => Some(("common", "tangent-point-must-differ-from-the-fit-endpoint")),
        "The INTERSECT result could not be displayed completely. The original objects were retained." => Some(("common", "the-intersect-result-could-not-be-displayed-completely-the-original-objects-were-retained")),
        "The INTERSECT result could not be encoded as ACIS." => Some(("common", "the-intersect-result-could-not-be-encoded-as-acis")),
        "The SUBTRACT result could not be displayed completely. The original objects were retained." => Some(("common", "the-subtract-result-could-not-be-displayed-completely-the-original-objects-were-retained")),
        "The SUBTRACT result could not be encoded as ACIS." => Some(("common", "the-subtract-result-could-not-be-encoded-as-acis")),
        "The UNION result could not be encoded as ACIS." => Some(("common", "the-union-result-could-not-be-encoded-as-acis")),
        "The chamfer history could not be recorded." => Some(("common", "the-chamfer-history-could-not-be-recorded")),
        "The edge body could not be updated." => Some(("common", "the-edge-body-could-not-be-updated")),
        "The edge body history could not be created." => Some(("common", "the-edge-body-history-could-not-be-created")),
        "The offset removes all material. Use a smaller distance or add a face back." => Some(("common", "the-offset-removes-all-material-use-a-smaller-distance-or-add-a-face-back")),
        "The region could not be encoded as ACIS." => Some(("common", "the-region-could-not-be-encoded-as-acis")),
        "The result could not be displayed completely. The original edge body was retained." => Some(("common", "the-result-could-not-be-displayed-completely-the-original-edge-body-was-retained")),
        "The selected base face no longer belongs to the body." => Some(("common", "the-selected-base-face-no-longer-belongs-to-the-body")),
        "The selected drawing data is ready to be extracted." => Some(("common", "the-selected-drawing-data-is-ready-to-be-extracted")),
        "The selected object is no longer available." => Some(("common", "the-selected-object-is-no-longer-available")),
        "The shell could not be constructed from the selected solid and distance." => Some(("common", "the-shell-could-not-be-constructed-from-the-selected-solid-and-distance")),
        "The shell offset distance must be nonzero." => Some(("common", "the-shell-offset-distance-must-be-nonzero")),
        "Trimmed surface" => Some(("common", "trimmed-surface")),
        "Trimming edges" => Some(("common", "trimming-edges")),
        "Trims" => Some(("common", "trims")),
        "Type a name and a formula (e.g. hole_dia = 12, hole_spacing = 2 * hole_dia + 1.5). Apply to save and re-solve; closing discards unapplied edits." => Some(("common", "type-a-name-and-a-formula-e-g-hole-dia-12-hole-spacing-2-hole-dia-1-5-apply-to-save-and-re-solve-closing-discards-unapplied-edits")),
        "U isolines" => Some(("common", "u-isolines-2")),
        "UNION: created %{count} result object(s)." => Some(("common", "union-created-result-object-s")),
        "UNION: select at least two solids, Regions, or planar Surfaces of the same type." => Some(("common", "union-select-at-least-two-solids-regions-or-planar-surfaces-of-the-same-type")),
        "UNION: the selected coincident geometry is ambiguous." => Some(("common", "union-the-selected-coincident-geometry-is-ambiguous")),
        "UNION: the selected geometry includes an unsupported surface intersection." => Some(("common", "union-the-selected-geometry-includes-an-unsupported-surface-intersection")),
        "UNION: the selected topology could not be closed safely." => Some(("common", "union-the-selected-topology-could-not-be-closed-safely")),
        "Use a previous extraction as a template" => Some(("common", "use-a-previous-extraction-as-a-template")),
        "Use source formatting" => Some(("common", "use-source-formatting")),
        "Used by" => Some(("common", "used-by")),
        "V isolines" => Some(("common", "v-isolines-2")),
        "Value must be nonzero." => Some(("common", "value-must-be-nonzero")),
        "Viewing Direction" => Some(("common", "viewing-direction")),
        "WIPEOUT  Specify next point or [Close/Undo]:" => Some(("common", "wipeout-specify-next-point-or-close-undo")),
        "WIPEOUT  Specify next point or [Undo]:" => Some(("common", "wipeout-specify-next-point-or-undo")),
        "WIPEOUT  Specify next point:" => Some(("common", "wipeout-specify-next-point")),
        "Wireframe type" => Some(("common", "wireframe-type")),
        "XATTACH" => Some(("insert", "xattach")),
        "XATTACH  Specify rotation angle <0>:" => Some(("insert", "xattach-specify-rotation-angle-0")),
        "XATTACH  Specify scale factor <1.0> (X,Y,Z or pick Corner):" => Some(("insert", "xattach-specify-scale-factor-1-0-x-y-z-or-pick-corner")),
        "XOPEN: opening \"{}\"." => Some(("insert", "xopen-opening")),
        "XREF: {e}" => Some(("insert", "xref")),
        "_mtp Specify first point of mid:" => Some(("common", "mtp-specify-first-point-of-mid")),
        "_mtp Specify second point of mid:" => Some(("common", "mtp-specify-second-point-of-mid")),
        "formula" => Some(("common", "formula-2")),
        "name" => Some(("common", "name")),
        "{command}: aligned {} object(s)." => Some(("common", "aligned-object-s")),
        "{}  Select annotative objects:" => Some(("common", "select-annotative-objects")),
        "{} parameter(s) applied." => Some(("common", "parameter-s-applied")),
        "{} row(s) skipped: duplicate parameter name." => Some(("common", "row-s-skipped-duplicate-parameter-name")),
        "{} surface(s) cannot be thickened because the offset intersects itself." => Some(("common", "surface-s-cannot-be-thickened-because-the-offset-intersects-itself")),
        "⚠ {parametric_conflicts} conflicting" => Some(("common", "conflicting")),
        "PLINE  Specify starting width <%{w}>:" => Some(("draw", "pline-specify-starting-width")),
        "PLINE  Specify ending width <%{w}>:" => Some(("draw", "pline-specify-ending-width")),
        "PLINE  Specify starting half-width <%{w}>:" => Some(("draw", "pline-specify-starting-half-width")),
        "PLINE  Specify ending half-width <%{w}>:" => Some(("draw", "pline-specify-ending-half-width")),
        "PLINE (Line)  Specify next point:" => Some(("draw", "pline-line-specify-next-point")),
        "PLINE (Arc)  Specify endpoint of arc:" => Some(("draw", "pline-arc-specify-endpoint-of-arc")),
        "PLINE  Specify length of line:" => Some(("draw", "pline-specify-length-of-line")),
        "PLINE  Specify included angle:" => Some(("draw", "pline-specify-included-angle")),
        "PLINE  Specify endpoint of arc:" => Some(("draw", "pline-specify-endpoint-of-arc")),
        "PLINE  Specify center point of arc:" => Some(("draw", "pline-specify-center-point-of-arc")),
        "PLINE  Specify radius of arc:" => Some(("draw", "pline-specify-radius-of-arc")),
        "PLINE  Specify direction of chord for arc:" => Some(("draw", "pline-specify-direction-of-chord-for-arc")),
        "PLINE  Specify length of chord:" => Some(("draw", "pline-specify-length-of-chord")),
        "PLINE  Specify tangent direction for the start point of arc:" => Some(("draw", "pline-specify-tangent-direction-for-the-start-point-of-arc")),
        "PLINE  Specify second point on arc:" => Some(("draw", "pline-specify-second-point-on-arc")),
        "Halfwidth" => Some(("draw", "halfwidth")),
        "CEnter" => Some(("draw", "center-keyword")),
        "CLose" => Some(("draw", "close-keyword")),
        "Second pt" => Some(("draw", "second-pt")),
        "ARea" => Some(("modify", "area-keyword")),
        "Displacement" => Some(("modify", "displacement")),
        "mOde" => Some(("modify", "mode-keyword")),
        "Array" => Some(("modify", "array-keyword")),
        "Use first point as displacement" => Some(("modify", "use-first-point-as-displacement")),
        "OFFSET  Erase source object after offsetting? [Yes/No] <No>:" => Some(("modify", "offset-erase-source-object-after-offsetting")),
        "OFFSET  Enter layer option for offset objects [Current/Source] <Source>:" => Some(("modify", "offset-enter-layer-option-for-offset-objects")),
        "Recent Input" => Some(("ui", "recent-input")),
        "Copy with Base Point" => Some(("ui", "copy-with-base-point")),
        "Undo %{label}" => Some(("ui", "undo-label")),
        "Redo %{label}" => Some(("ui", "redo-label")),
        "Copy Selection" => Some(("ui", "copy-selection")),
        "Isolate" => Some(("ui", "isolate")),
        "Deselect All" => Some(("ui", "deselect-all")),
        "Options..." => Some(("ui", "options-ellipsis")),
        "Base Point" => Some(("ui", "base-point")),
        "Right-click Customization" => Some(("options", "right-click-customization")),
        "Right-click in drawing area" => Some(("options", "right-click-in-drawing-area")),
        "Hold duration" => Some(("options", "hold-duration")),
        "Shortcut menu: right-click always opens the menu. Time-sensitive: a quick click is Enter, holding longer opens the menu (SHORTCUTMENUDURATION)." => Some(("options", "right-click-mode-help")),
        "Shortcut menu" => Some(("options", "right-click-mode-shortcut-menu")),
        "Time-sensitive (quick click = Enter)" => Some(("options", "right-click-mode-time-sensitive")),
        "Enter first, second click = menu" => Some(("options", "right-click-mode-enter-first")),
        "ARC  Specify start point of arc:" => Some(("draw", "arc-specify-start-point-of-arc")),
        "ARC  Specify second point of arc:" => Some(("draw", "arc-specify-second-point-of-arc")),
        "ARC  Specify end point of arc:" => Some(("draw", "arc-specify-end-point-of-arc")),
        "ARC  Specify center point of arc:" => Some(("draw", "arc-specify-center-point-of-arc")),
        "ARC  Specify included angle:" => Some(("draw", "arc-specify-included-angle")),
        "ARC  Specify length of chord:" => Some(("draw", "arc-specify-length-of-chord")),
        "ARC  Specify tangent direction for the start point of arc:" => Some(("draw", "arc-specify-tangent-direction-for-the-start-point-of-arc")),
        "ARC  Specify radius of arc:" => Some(("draw", "arc-specify-radius-of-arc")),
        "chord Length" => Some(("draw", "chord-length")),
        "Snap Overrides" => Some(("ui", "snap-overrides")),
        "Mid Between 2 Points" => Some(("ui", "mid-between-2-points")),
        "Osnap Settings..." => Some(("ui", "osnap-settings")),
        "Snap override: None (next pick only)." => Some(("ui", "snap-override-none-next-pick-only")),
        "Allow exploding" => Some(("common", "allow-exploding")),
        "Angstroms" => Some(("common", "angstroms")),
        "Astronomical Units" => Some(("common", "astronomical-units")),
        "BLOCK  Select objects:" => Some(("insert", "block-select-objects")),
        "BLOCK  Specify insertion base point:" => Some(("insert", "block-specify-insertion-base-point")),
        "BLOCK creates a block definition from objects you select." => Some(("common", "block-creates-a-block-definition-from-objects-you-select")),
        "Behavior" => Some(("common", "behavior")),
        "Block \"{name}\" already exists.\nDo you want to redefine it?" => Some(("common", "block-name-already-exists-do-you-want-to-redefine-it")),
        "Block \"{}\" already exists — will redefine upon OK" => Some(("common", "block-already-exists-will-redefine-upon-ok")),
        "Block Definition" => Some(("common", "block-definition")),
        "Block name" => Some(("common", "block-name")),
        "Block name cannot be empty." => Some(("common", "block-name-cannot-be-empty")),
        "Block name cannot contain: \\ / : * ? \" < > | = `" => Some(("common", "block-name-cannot-contain-invalid-chars")),
        "Block name cannot start with '*'." => Some(("common", "block-name-cannot-start-with-star")),
        "Block unit:" => Some(("common", "block-unit-label")),
        "Convert to block" => Some(("common", "convert-to-block")),
        "Decameters" => Some(("common", "decameters")),
        "Decimeters" => Some(("common", "decimeters")),
        "Enter block description..." => Some(("common", "enter-block-description")),
        "Gigameters" => Some(("common", "gigameters")),
        "Hectometers" => Some(("common", "hectometers")),
        "Hyperlink*" => Some(("common", "hyperlink-star")),
        "Hyperlink..." => Some(("common", "hyperlink-ellipsis")),
        "Invalid character '{invalid_char}' in block name (\\ / : * ? \" < > | = ` are not allowed)" => Some(("common", "invalid-character-in-block-name")),
        "Light Years" => Some(("common", "light-years")),
        "Match block orientation" => Some(("common", "match-block-orientation")),
        "Microinches" => Some(("common", "microinches")),
        "Microns" => Some(("common", "microns")),
        "Mils" => Some(("common", "mils")),
        "Nanometers" => Some(("common", "nanometers")),
        "No objects selected" => Some(("common", "no-objects-selected")),
        "No objects selected. You must select objects to define a block." => Some(("common", "no-objects-selected-you-must-select-objects-to-define-a-block")),
        "Objects" => Some(("common", "objects-title-case")),
        "Parsecs" => Some(("common", "parsecs")),
        "Pick point" => Some(("common", "pick-point")),
        "Retain" => Some(("common", "retain")),
        "Scale uniformly" => Some(("common", "scale-uniformly")),
        "Specify On-screen" => Some(("common", "specify-on-screen")),
        "US Survey Feet" => Some(("common", "us-survey-feet")),
        "to layout" => Some(("common", "to-layout")),
        "{count} objects selected" => Some(("common", "count-objects-selected")),
        _ => None,
    }
}