Setup symbols: wireframe glyphs per held degree of freedom, a constant size on screen

Boundary condition, load and interaction symbols are wireframes (thin lines,
no shaded cones), so they never hide the mesh or a contour plot:

- a crossed wire triangle per constrained translation, tip on the node,
  coming from outside the part where the set's faces say which side that is;
  a held rotation adds a smaller triangle behind it (the double mark); fixed
  shows all three axes, a symmetry plane only its normal;
- forces as open-headed arrows ending on the node, as long as four support
  units at one place and 2.5 over a set, so loads and supports stay in
  proportion (#78); moments as an axis line and a right-handed curved arrow
  (#79); contact and tie surfaces as small squares on their faces;
- a constant size on screen at any zoom (#80): the symbol unit is the size
  setting (View > Symbol size, `ui.set {symbol_size}`, 14 pt by default)
  times the model length a pixel spans, rounded to a quarter of a doubling;
- spread evenly on a grid a few symbol units across, so their density follows
  the screen, never more than 400 per definition;
- a layer of their own on the desktop (GPU and CPU): zooming rebuilds and
  uploads the symbols only, never the mesh's scene; framing leaves them out;
- colour per kind from the theme's tokens (a new contact colour), and the
  definition selected in the browser drawn in the selection colour, wider;
- depth-tested against the model with the line bias that keeps them on their
  own surface; a load at a reference point or a single node and a reference
  point's cross are drawn over the part (#78).

Headless pictures (MCP screenshot, `ui.render`) frame the camera first and
draw the symbols at the default size for it.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo

docs/control-protocol.md

@@ -42,8 +42,8 @@ commands (files, undo, `model.info`) leave the ribbon where it is.
 | Method | Params | Notes |
 |---|---|---|
 | `ui.inspect` | — | view settings (`ui`), camera, viewport rect (points), renderer (`gpu`/`cpu`) and adapter, open command form, status bar, node and element counts, the results display (`results`: what the `results.*` commands reply: view, `stale`, contour range, modes), the probed node (`probe`), `solve` (the title bar's Solve: `enabled`, and `unavailable` as `ui.toolbar`'s entries give it, listing everything `solve.run` misses), `busy` (the background job: a file opening, a solve, a mesher run from its form by a click on OK), `prompt` (`{"unsaved": path}`, `{"design": path}` (a design of another part opened over a meshed or defined model), `"recover"`, `"samples"`), `recent` (recent files), `selected` (the browser's selected definition), `browser` (each top-level browser node's setup state: `[{node, state, tip, add}]`, `state` `done`, `next`, `blocked` (⚠: its command cannot run yet; `tip` says what it needs and where), `todo`, `optional` or null for nodes that are no setup stage, `add` its ghost rows `{stage, label, command, status}`; a ghost row's region is `layout`'s `browser/add/<stage>`), `nav` (the left-drag mode), `layout` (each region of the window drawn last frame as `[x, y, w, h]` in points: `app_bar`, `ribbon`, `workspace_switcher`, `document_tab`, `app_bar:<action>`, `browser`, `viewport`, `nav_bar`, `axis_view`, `selection_bar`, `legend` (while results are shown), `context`, `command_line`, `timeline`, `toolbar_dropdown`, `palette`), version |
-| `ui.set` | any view setting: `style` (`shaded_edges`, `shaded`, `wireframe`), `show_nodes`, `show_geometry`, `show_mesh`, `show_loads` (boundary condition and load symbols), `show_interactions` (reference points, couplings, rigid walls), `perspective`, `dark`, `show_tree` (the browser), `show_timeline`, `nav_preset` (the mouse navigation: `fieldcraft`, `fusion`, `solidworks`, `inventor`, `alias`, `tinkercad`, `openscad`; an unknown id acts as `fieldcraft`) and `reverse_zoom` (both remembered per user), `workspace` (`prepare`, `model`, `analysis`, `results`), `tab` (the toolbar tab: `geometry`, `mesh`, `properties`, `assembly`, `steps`, `loads`, `interactions`, `solve`, `results`, `tools`; a tab of another workspace brings that workspace), `palette` (the command search open), `menu` (the open menu: `file`, `help`, `workspace`, `view`, `more`, or a panel's drop-down as `<tab>/<panel>` such as `mesh/Tet`; `null` closes it) | an unknown setting or value is an error; returns the settings |
-| `ui.view` | `view`: `front`, `back`, `left`, `right`, `top`, `bottom`, `iso`, `home` (iso and fit), `fit` | every view frames the model as drawn (the deformed shape and the setup's symbols included) in the part of the viewport the overlays (`layout`'s `legend`, `selection_bar`, `axis_view`, `nav_bar`) leave free; `fit` keeps the direction of view. Opening another model, sample or design frames it in the home view (the same design opened again after an edit keeps the camera), and results that come up with part of the model out of sight are framed. Returns the camera |
+| `ui.set` | any view setting: `style` (`shaded_edges`, `shaded`, `wireframe`), `show_nodes`, `show_geometry`, `show_mesh`, `show_loads` (boundary condition and load symbols), `show_interactions` (reference points, couplings, contact and tie surfaces, rigid walls), `symbol_size` (the setup symbols' size on screen in points, 6–48, at any zoom), `perspective`, `dark`, `show_tree` (the browser), `show_timeline`, `nav_preset` (the mouse navigation: `fieldcraft`, `fusion`, `solidworks`, `inventor`, `alias`, `tinkercad`, `openscad`; an unknown id acts as `fieldcraft`) and `reverse_zoom` (both remembered per user), `workspace` (`prepare`, `model`, `analysis`, `results`), `tab` (the toolbar tab: `geometry`, `mesh`, `properties`, `assembly`, `steps`, `loads`, `interactions`, `solve`, `results`, `tools`; a tab of another workspace brings that workspace), `palette` (the command search open), `menu` (the open menu: `file`, `help`, `workspace`, `view`, `more`, or a panel's drop-down as `<tab>/<panel>` such as `mesh/Tet`; `null` closes it) | an unknown setting or value is an error; returns the settings |
+| `ui.view` | `view`: `front`, `back`, `left`, `right`, `top`, `bottom`, `iso`, `home` (iso and fit), `fit` | every view frames the model as drawn (the deformed shape included; the setup's symbols keep their size on screen and are not framed) in the part of the viewport the overlays (`layout`'s `legend`, `selection_bar`, `axis_view`, `nav_bar`) leave free; `fit` keeps the direction of view. Opening another model, sample or design frames it in the home view (the same design opened again after an edit keeps the camera), and results that come up with part of the model out of sight are framed. Returns the camera |
 | `ui.camera` | `yaw`, `pitch` (degrees), `distance?` (model units) | turns the camera to any orientation about its target: `yaw` about Z (0 looks along +Y, the front view; −45 is the iso view's, −90 the right view's), `pitch` the elevation above the XY plane; `distance` moves the eye (the zoom of an orthographic view). Angles must be finite and the distance above 0: the yaw is wrapped, the pitch clamped to ±90 and the distance to 0.001–10⁹; anything else is an error. A sequence of calls orbits smoothly. Returns the camera (`ui.inspect`'s, angles in radians) |
 | `ui.toolbar` | — | the ribbon: `workspace`, `workspaces`, `tab`, `tabs` (the workspace's), `menu` (the open menu), `panels` (each panel label's `menu` key and `rect`), and every catalogue entry (docs/features.md) with `id`, `label`, `tab`, `panel`, `command` (null while coming soon), `more` (its related commands), `coming_soon` (the milestone, or null), `enabled` (false while coming soon or while its command misses what it needs), `unavailable` (null, or what its command misses: `reason`, the tooltip's lines such as "Needs a material — Properties › Material", and `missing`, each with `requirement`, `what`, `provider` (the command that provides it) and `place` (its toolbar entry)), `fit` — `full` (a button), `collapsed` (its panel is one button), `more` (its panel is in the » menu) or `menu` (in its panel's drop-down) — and `rect` (screen points, last frame, on the shown tab; for `menu` entries the row while the drop-down is open) |
 | `ui.start` | `command`: a command or toolbar entry id | like a click on the toolbar, a drop-down row or a search result: a command without parameters runs, one with parameters opens its form in the context panel; an entry that is coming soon is an error naming its milestone. Never opens a native file picker: file entries (open, save as, write deck) open their command's form |