Hybrid (mixed u–p) solids: hex8 and tet10 with a constant pressure, hex20 with a linear one (#49)

The isotropic elasticity splits into D_dev + K m mᵀ; an element-wise
discontinuous pressure is condensed out (p̂ = K M⁻¹ Gᵀ u), leaving
K_dev + K G M⁻¹ Gᵀ (Hughes §4.3–4.5). Q2–P1disc and P2–P0 are inf-sup
stable; Q1–P0 does not lock; tet4 and wedge6 still lock and are refused, as
are orthotropic materials (named at the section). ElementDofs counts the
condensed pressures. Verified: element patch, rigid modes and totals for
every hybrid kind, a block in uniaxial strain at ν = 0.4999 (exact), Lamé's
cylinder in plane strain at ν = 0.4999 (hex20 1e-5, tet10 1.3e-3, hex8
2.5e-3 vs the locking displacement hex8 at −80 %). Every non-hybrid result
of the test suites hashes identically before and after.


Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm

Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>

ROADMAP.md

@@ -26,7 +26,7 @@ hex meshes today and it gives the best elements where stresses are read.
 | M5 Structured hex | 2D quad meshing of faces (`modelcraft-mesh::quad`: transfinite mapped meshes, free all-quad meshes of polygons with holes on prescribed boundary nodes, exact planar quad validity, shared `SizeField` and even edge divisions; done for planar faces); mapped hex of six-sided regions; sweep meshing; conforming interfaces and tet–hex transition; automatic decomposition into sweepable and mappable regions, proposed as SolidCraft splits | started |
 | M6 Automatic hex | Octree/grid-dual all-hex for any part; hex-dominant by tet recombination; polycube for blocky parts; smoothing, untangling, boundary padding, layers through thin walls; mesh editing and orphan-mesh import | planned |
 | M7 Assemblies and contact | Part instances from SolidCraft occurrences; tie between non-matching meshes; general and pairwise contact with automatic pair detection, friction; bolt pretension, connectors; amplitudes, multiple steps; nonlinear static steps in decks | planned |
-| M8 Materials, explicit, shells, composites | Plasticity, hyperelasticity, damage data per solver; explicit dynamics decks (Abaqus/Explicit, LS-DYNA); midsurface shells; composite layups and material orientations, continuum shells on swept hex; heat transfer (solids done: steady and θ-method transient conduction with flux, convection and sources, thermal strain in static steps (solids and 2D) and explicit dynamics (with plasticity), coupled temperature–displacement, `solve.heat`; deck output, 2D/shell/beam conduction planned) | started |
+| M8 Materials, explicit, shells, composites | Plasticity, hyperelasticity, damage data per solver; explicit dynamics decks (Abaqus/Explicit, LS-DYNA); midsurface shells; composite layups and material orientations, continuum shells on swept hex; hybrid (mixed u–p) hex8/hex20/tet10 for nearly incompressible materials (done); heat transfer (solids done: steady and θ-method transient conduction with flux, convection and sources, thermal strain in static steps (solids and 2D) and explicit dynamics (with plasticity), coupled temperature–displacement, `solve.heat`; deck output, 2D/shell/beam conduction planned) | started |
 | M9 Post-processing and deck readers | Results readers for public formats (Nastran OP2, LS-DYNA d3plot, Abaqus `.fil`); XY and path plots, cuts, display groups, free-body forces; deck readers that keep unknown keywords; mesh convergence studies | planned |
 | M10 Explicit dynamics | Shared element and material kernels with the implicit solver (`fem`); central-difference solver with lumped mass, stable time step, one-point hex8 with hourglass control and nodal-pressure tet4, bulk viscosity, energy accounting (X1 core: done — `modelcraft-explicit`, `explicit_dynamic` steps with initial velocities, prescribed motion and planar rigid walls, `solve.explicit`/`solve.history`, small-strain linear elastic; bar wave, rigid-wall impact, energy balance and cantilever-period tests); large-deformation materials (X2: done — updated Lagrangian elements, Jaumann/Hughes–Winget and Green–Naghdi/Flanagan–Taylor rates, J2 bilinear/table plasticity, Johnson–Cook strength with heating and damage, erosion; materials gain `plastic`, `damage`, `erosion` with `model.material.plasticity`/`damage`; Dienes shear, rigid rotation, J2 uniaxial and Taylor-bar tests); contact (global search, penalty with friction, rigid walls); runs on hex and tet meshes | started |
 | M11 Equations of state and shells | Polynomial, ideal-gas, Mie–Grüneisen, JWL with programmed burn, tabulated; energy coupling; shock verification (Rankine–Hugoniot, Sod, Noh, Sedov); Belytschko–Lin–Tsay shells with self-contact on quad meshes | planned |