engine: refuse unknown command parameters, suggest a valid name, document heat loads and thermal materials

Every command with a schema now refuses a top-level key it does not take,
naming the key and the accepted ones (#316). A bad definition name's error
suggests the nearest valid one (#320). The load and material params docs list
the heat loads and the thermal block.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo

crates/engine/src/cmd/define.rs

@@ -92,7 +92,7 @@ definition_commands!(
     Material,
     "material",
     "Material",
-    r#"{"name": "Steel", "elastic": {"type": "isotropic", "young": 210000, "poisson": 0.3} | {"type": "engineering_constants", "young": [E1, E2, E3], "poisson": [ν12, ν13, ν23], "shear": [G12, G13, G23]}, "density": 7.85e-9, "fluid": {"type": "newtonian", "viscosity": 1.0e-9} (dynamic viscosity; a fluid needs a density), "plastic": {…} (see model.material.plasticity), "damage": {…}, "erosion": {…} (see model.material.damage), "hyperelastic": {"type": "neo_hookean"} | {"type": "mooney_rivlin", "c01": 0.1} (C10 = μ/2 − C01) | {"type": "yeoh", "c20": -0.01, "c30": 0.001} (C10 = μ/2) (large strain in nonlinear steps, from the isotropic constants: μ = E/(2(1 + ν)), κ = E/(3(1 − 2ν)); without it an elastic material is St Venant–Kirchhoff there)} — in the model's unit system (model.units), never converted"#,
+    r#"{"name": "Steel", "elastic": {"type": "isotropic", "young": 210000, "poisson": 0.3} | {"type": "engineering_constants", "young": [E1, E2, E3], "poisson": [ν12, ν13, ν23], "shear": [G12, G13, G23]}, "density": 7.85e-9, "fluid": {"type": "newtonian", "viscosity": 1.0e-9} (dynamic viscosity; a fluid needs a density), "plastic": {…} (see model.material.plasticity), "damage": {…}, "erosion": {…} (see model.material.damage), "hyperelastic": {"type": "neo_hookean"} | {"type": "mooney_rivlin", "c01": 0.1} (C10 = μ/2 − C01) | {"type": "yeoh", "c20": -0.01, "c30": 0.001} (C10 = μ/2) (large strain in nonlinear steps, from the isotropic constants: μ = E/(2(1 + ν)), κ = E/(3(1 − 2ν)); without it an elastic material is St Venant–Kirchhoff there), "thermal": {"conductivity": 0.05 | [kx, ky, kz], "specific_heat": 4.6e8, "expansion": 1.2e-5 | [αx, αy, αz], "reference_temperature": 20 (zero thermal strain; default 0)} (heat transfer and thermal strain; each key optional)} — in the model's unit system (model.units), never converted"#,
     super::forms::MATERIAL,
     super::forms::MATERIAL_DELETE,
     add_material,
@@ -267,7 +267,7 @@ definition_commands!(
     Load,
     "load",
     "Load",
-    r#"{"name": "push", "type": "force|moment", "target": {"set": "…"} | {"reference_point": "…"}, "vector": [x, y, z], "distribution": "total" (default: the vector is the total, split by area over the set's faces, or equally over its nodes) | "per_node" (at every node: depends on the mesh)} | {"name", "type": "traction", "set", "vector" (per area, on the set's faces)} | {"name", "type": "pressure", "set", "magnitude" (positive pushes in)} | {"name", "type": "gravity", "acceleration": [x, y, z], "set" (optional, default the whole model)} | {"name", "type": "body_force", "set", "vector" (per volume)} | {"name", "type": "centrifugal", "angular_velocity" (rad per time unit), "point": [x, y, z] (on the axis), "axis": [x, y, z], "set" (optional)} — 2D models: in-plane vectors, surface loads on element edges; active in the steps that list it (model.step.activate)"#,
+    r#"{"name": "push", "type": "force|moment", "target": {"set": "…"} | {"reference_point": "…"}, "vector": [x, y, z], "distribution": "total" (default: the vector is the total, split by area over the set's faces, or equally over its nodes) | "per_node" (at every node: depends on the mesh)} | {"name", "type": "traction", "set", "vector" (per area, on the set's faces)} | {"name", "type": "pressure", "set", "magnitude" (positive pushes in)} | {"name", "type": "gravity", "acceleration": [x, y, z], "set" (optional, default the whole model)} | {"name", "type": "body_force", "set", "vector" (per volume)} | {"name", "type": "centrifugal", "angular_velocity" (rad per time unit), "point": [x, y, z] (on the axis), "axis": [x, y, z], "set" (optional)} | {"name", "type": "surface_flux", "set", "flux" (heat per area into the set's faces)} | {"name", "type": "convection", "set", "film" (film coefficient h), "sink" (surrounding temperature): heat flux h (sink − T) into the set's faces} | {"name", "type": "heat_source", "set", "power" (heat per volume in the set's elements)} | {"name", "type": "temperature", "target": {"set": "…"} | {"reference_point": "…"}, "value" (a temperature that strains the material in stress steps)} — heat loads act in heat transfer and coupled steps; 2D models: in-plane vectors, surface loads on element edges; active in the steps that list it (model.step.activate)"#,
     super::forms::LOAD,
     super::forms::LOAD_DELETE,
     add_load,