oracle: 2D cases (Kirsch plane stress, Lamé plane strain and axisymmetric, rotating disc and cylinder, NAFEMS LE1 with quad8) and J2 uniaxial explicit

The pending 2D LE1 case becomes a real one; the plasticity cases stay
pending with what they still need (static J2 for the collapse pressure,
the transcribed measurements for the Taylor bar).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
This commit is contained in:
jyvikoandClaude Opus 5.5 authored and Irakli Kourtis committed 2026-10-13 21:42:19 -04:00
1 parent 84e81acf3a
commit 96c9992c92
31 files changed
+686 -13

No files matched your search

@@ -0,0 +1,5 @@
# Thick-walled cylinder under internal pressure, 2D plane strain (Lamé)
The cylinder of `lame-cylinder` (a = 10, b = 20, p = 100, E = 210000, ν = 0.3) as a 2D plane
strain quarter: one quad8 patch (8 × 16) with mid-side nodes on the arcs, symmetry on x = 0 and
y = 0.
@@ -0,0 +1,76 @@
{
"title": "Thick-walled cylinder under internal pressure, 2D plane strain (Lamé)",
"kind": "theory",
"source": "Lamé's solution, Timoshenko and Goodier, Theory of Elasticity, 3rd ed., McGraw-Hill 1970, §28",
"quantities": [
{
"id": "ur_a",
"quantity": "radial displacement at the bore (10, 0)",
"measure": {
"command": "solve.probe",
"params": {
"step": "Pressure",
"at": [
[
10.0,
0,
0
]
]
},
"pointer": "/nodes/0/displacement/0"
},
"value": 0.00907936507936508,
"tolerance": {
"relative": 0.001
},
"reason": "quadratic elements on 8 radial divisions resolve u_r = A r + B/r to well under 0.1%"
},
{
"id": "hoop_a",
"quantity": "hoop stress σ_θ = σ_yy at the bore (10, 0)",
"measure": {
"command": "solve.probe",
"params": {
"step": "Pressure",
"at": [
[
10.0,
0,
0
]
]
},
"pointer": "/nodes/0/stress/1"
},
"value": 166.66666666666666,
"tolerance": {
"relative": 0.01
},
"reason": "stress extrapolated to the bore surface and averaged over two elements: about 0.5%"
},
{
"id": "szz",
"quantity": "axial stress σ_zz = 2νA at the bore (plane strain)",
"measure": {
"command": "solve.probe",
"params": {
"step": "Pressure",
"at": [
[
10.0,
0,
0
]
]
},
"pointer": "/nodes/0/stress/2"
},
"value": 20.0,
"tolerance": {
"relative": 0.01
},
"reason": "σ_zz = ν(σ_r + σ_θ) follows the in-plane stresses, extrapolated as they are"
}
]
}
@@ -0,0 +1,17 @@
{
"note": "ModelCraft's accepted results for this case, written by `cargo xtask oracle --bless`. A result outside its band fails CI.",
"values": {
"hoop_a": {
"band": 1.6666666666666668e-7,
"value": 166.36121907829184
},
"szz": {
"band": 2.0083065355856494e-8,
"value": 20.083065355856494
},
"ur_a": {
"band": 9.07936507936508e-12,
"value": 0.009079340794556473
}
}
}
@@ -0,0 +1,14 @@
[
{"command": "mesh.block", "params": {"body": "Pipe", "kind": "quad8", "corners": [[10.0, 0, 0], [20.0, 0, 0], [0, 20.0, 0], [0, 10.0, 0]], "divisions": [8, 16], "edges": [{"corners": [2, 3], "arc": {"center": [0, 0, 0]}}, {"corners": [1, 4], "arc": {"center": [0, 0, 0]}, "name": "bore"}, {"corners": [1, 2], "name": "y0"}, {"corners": [3, 4], "name": "x0"}]}},
{"command": "model.set.create", "params": {"name": "all", "geometry": [{"body": "Pipe", "face": "area"}]}},
{"command": "model.set.create", "params": {"name": "bore", "geometry": [{"body": "Pipe", "edge": "bore"}]}},
{"command": "model.set.create", "params": {"name": "x0", "geometry": [{"body": "Pipe", "edge": "x0"}]}},
{"command": "model.set.create", "params": {"name": "y0", "geometry": [{"body": "Pipe", "edge": "y0"}]}},
{"command": "model.material.create", "params": {"name": "Steel", "elastic": {"type": "isotropic", "young": 210000.0, "poisson": 0.3}}},
{"command": "model.section.create", "params": {"name": "pipe", "set": "all", "material": "Steel", "kind": {"type": "plane_strain", "thickness": 1.0}}},
{"command": "model.boundary_condition.create", "params": {"name": "sx", "type": "symmetry", "target": {"set": "x0"}, "plane": "x"}},
{"command": "model.boundary_condition.create", "params": {"name": "sy", "type": "symmetry", "target": {"set": "y0"}, "plane": "y"}},
{"command": "model.load.create", "params": {"name": "p", "type": "pressure", "set": "bore", "magnitude": 100.0}},
{"command": "model.step.create", "params": {"name": "Pressure", "procedure": {"type": "static"}, "boundary_conditions": ["sx", "sy"], "loads": ["p"]}},
{"command": "solve.static", "params": {}, "id": "solve"}
]