oracle: 2D cases (Kirsch plane stress, Lamé plane strain and axisymmetric, rotating disc and cylinder, NAFEMS LE1 with quad8) and J2 uniaxial explicit

The pending 2D LE1 case becomes a real one; the plasticity cases stay
pending with what they still need (static J2 for the collapse pressure,
the transcribed measurements for the Taylor bar).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
This commit is contained in:
jyvikoandClaude Opus 5.5 authored and Irakli Kourtis committed 2026-10-13 21:42:19 -04:00
1 parent 84e81acf3a
commit 96c9992c92
31 files changed
+686 -13

No files matched your search

@@ -0,0 +1,5 @@
# Long rotating solid cylinder, axisymmetric
A solid cylinder of radius 1 (E = 1000, ν = 0.3, ρ = 10⁻³) spinning at 30 rad/s about its axis y,
as an axisymmetric slice 0 ≤ y ≤ 0.2 held axially on both faces (ε_z = 0): one quad8 patch of
16 × 2. σ_r = (3 − 2ν)/(8(1 − ν)) ρω²(b² − r²), σ_θ = ρω²/(8(1 − ν)) ((3 − 2ν)b² − (1 + 2ν)r²).
@@ -0,0 +1,53 @@
{
"title": "Long rotating solid cylinder, axisymmetric",
"kind": "theory",
"source": "Timoshenko and Goodier, Theory of Elasticity, 3rd ed., McGraw-Hill 1970, §32 (long rotating cylinder, ε_z = 0)",
"quantities": [
{
"id": "radial_axis",
"quantity": "radial stress σ_r on the axis (r = 0)",
"measure": {
"command": "solve.probe",
"params": {
"step": "Spin",
"at": [
[
0,
0,
0
]
]
},
"pointer": "/nodes/0/stress/0"
},
"value": 0.3857142857142857,
"tolerance": {
"relative": 0.01
},
"reason": "stress extrapolated to the axis, where σ_r = σ_θ: under 1% with sixteen quadratic elements across"
},
{
"id": "hoop_rim",
"quantity": "hoop stress σ_θ at the surface (r = 1)",
"measure": {
"command": "solve.probe",
"params": {
"step": "Spin",
"at": [
[
1.0,
0,
0
]
]
},
"pointer": "/nodes/0/stress/2"
},
"value": 0.12857142857142853,
"tolerance": {
"relative": 0.01
},
"reason": "stress extrapolated to the surface: under 1%"
}
]
}
@@ -0,0 +1,13 @@
{
"note": "ModelCraft's accepted results for this case, written by `cargo xtask oracle --bless`. A result outside its band fails CI.",
"values": {
"hoop_rim": {
"band": 1.2872894568377547e-10,
"value": 0.12872894568377546
},
"radial_axis": {
"band": 3.8608385213197527e-10,
"value": 0.38608385213197527
}
}
}
@@ -0,0 +1,11 @@
[
{"command": "mesh.block", "params": {"body": "Shaft", "kind": "quad8", "corners": [[0, 0, 0], [1.0, 0, 0], [1.0, 0.2, 0], [0, 0.2, 0]], "divisions": [16, 2], "edges": [{"corners": [1, 2], "name": "bottom"}, {"corners": [3, 4], "name": "top"}]}},
{"command": "model.set.create", "params": {"name": "all", "geometry": [{"body": "Shaft", "face": "area"}]}},
{"command": "model.set.create", "params": {"name": "ends", "geometry": [{"body": "Shaft", "edge": "bottom"}, {"body": "Shaft", "edge": "top"}]}},
{"command": "model.material.create", "params": {"name": "Mat", "elastic": {"type": "isotropic", "young": 1000.0, "poisson": 0.3}, "density": 0.001}},
{"command": "model.section.create", "params": {"name": "shaft", "set": "all", "material": "Mat", "kind": {"type": "axisymmetric"}}},
{"command": "model.boundary_condition.create", "params": {"name": "ends", "type": "symmetry", "target": {"set": "ends"}, "plane": "y"}},
{"command": "model.load.create", "params": {"name": "spin", "type": "centrifugal", "angular_velocity": 30.0, "point": [0, 0, 0], "axis": [0, 1, 0]}},
{"command": "model.step.create", "params": {"name": "Spin", "procedure": {"type": "static"}, "boundary_conditions": ["ends"], "loads": ["spin"]}},
{"command": "solve.static", "params": {}, "id": "solve"}
]