forked from 1b-agent/fieldcraft-upstream
Lattice Boltzmann flow on the CPU: model, solver, engine (M12) (#36)
Model: Newtonian fluid materials; fluid domains (box, spacing, conditions on the box faces, obstacle bodies with conditions on their named faces, initial velocity, body acceleration); fluid steps with caps. Deck writers refuse fluid steps; a fluid-only model needs no mesh in model.check; one step selector (Model::select_step) for every solver. New L2 crate modelcraft-lbm: D3Q19 two-relaxation-time collision with Guo forcing; halfway bounce-back walls (moving walls after Ladd), slip faces, periodic pairs; Zou–He velocity and pressure faces with the D3Q19 transverse correction; obstacles voxelised from the face-tagged boundary surface with exact predicates and symbolic perturbation; momentum-exchange forces per box face and per B-rep face; unit conversion, automatic time step and Mach/tau limits; bounded runs with frames and force histories. Engine: model.fluid_domain.create/edit/delete, model.fluid_domain.boundary, solve.fluid (obstacles from the open design or imported surfaces, lowerable caps), solve.probe for fluid fields and wall force histories. Fluid Domain, Inlet & Outlet and Lattice Boltzmann toolbar entries are ready. Verification (analytic): plane Poiseuille exact with Λ = 3/16 and second order (2.000) with Λ = 1/4; Couette exact with the wall shear; Taylor–Green decay second order (2.01, 2.00); staircase pipe; Stokes drag of a sphere array within 1.7% of Hasimoto at R = 6; Zou–He channel; mass conserved to round-off; bit-for-bit reproducibility. Benchmark: Schäfer–Turek 2D-1. Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com> Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
This commit is contained in:
55 files changed
+3800
-64
No files matched your search
@@ -131,7 +131,7 @@ impl Read {
|
||||
// Our own models.
|
||||
|
||||
fn steel() -> Material {
|
||||
Material { elastic: Some(Elastic::Isotropic { young: 210_000.0, poisson: 0.3 }), density: Some(7.85e-9) }
|
||||
Material { elastic: Some(Elastic::Isotropic { young: 210_000.0, poisson: 0.3 }), density: Some(7.85e-9), fluid: None }
|
||||
}
|
||||
|
||||
/// A bar of `n` unit hex8 along X; node (i, y, z) = 1 + 4i + 2y + z.
|
||||
@@ -188,7 +188,11 @@ fn plate() -> Model {
|
||||
m.add_set("all", Set { elements: vec![1, 2, 3, 4], ..Set::default() }).unwrap();
|
||||
m.add_set("edge", Set { nodes: vec![1, 4, 7], ..Set::default() }).unwrap();
|
||||
m.add_set("top", Set { faces: (1..=4).map(|element| ElementFace { element, face: 1 }).collect(), ..Set::default() }).unwrap();
|
||||
m.add_material("Aluminium", Material { elastic: Some(Elastic::Isotropic { young: 70_000.0, poisson: 0.33 }), density: Some(2.7e-9) }).unwrap();
|
||||
m.add_material(
|
||||
"Aluminium",
|
||||
Material { elastic: Some(Elastic::Isotropic { young: 70_000.0, poisson: 0.33 }), density: Some(2.7e-9), fluid: None },
|
||||
)
|
||||
.unwrap();
|
||||
let shell = SectionKind::Shell { thickness: 2.0, offset: 0.0, points: 5 };
|
||||
m.add_section("skin", Section { set: "all".into(), material: "Aluminium".into(), kind: shell, formulation: Formulation::default() }).unwrap();
|
||||
m.add_boundary_condition("clamp", BoundaryCondition::Fixed { target: Target::Set("edge".into()) }).unwrap();
|
||||
@@ -517,6 +521,7 @@ fn beams_rods_orthotropy_couplings_and_prescribed_motion() {
|
||||
let ortho = Material {
|
||||
elastic: Some(Elastic::EngineeringConstants { young: [140e3, 10e3, 12e3], poisson: [0.3, 0.28, 0.4], shear: [5e3, 4.5e3, 3.8e3] }),
|
||||
density: Some(1.6e-9),
|
||||
fluid: None,
|
||||
};
|
||||
m.add_material("Carbon", ortho.clone()).unwrap();
|
||||
m.replace_section(
|
||||
@@ -671,7 +676,7 @@ fn what_nastran_cannot_express_is_named() {
|
||||
// Orthotropic beams, tilted orthotropic shells, one-point shells.
|
||||
let mut m = plate();
|
||||
let ortho = Elastic::EngineeringConstants { young: [140e3, 10e3, 10e3], poisson: [0.3, 0.3, 0.4], shear: [5e3, 5e3, 3.8e3] };
|
||||
m.replace_material("Aluminium", Material { elastic: Some(ortho), density: Some(1.6e-9) }).unwrap();
|
||||
m.replace_material("Aluminium", Material { elastic: Some(ortho), density: Some(1.6e-9), fluid: None }).unwrap();
|
||||
m.set_node(9, [10.0, 10.0, 0.5]).unwrap();
|
||||
assert!(unsupported(&m).contains("planes of constant Z"));
|
||||
m.set_node(9, [10.0, 10.0, 0.0]).unwrap();
|
||||
@@ -690,7 +695,7 @@ fn what_nastran_cannot_express_is_named() {
|
||||
let mut m = plate();
|
||||
m.set_element(9, ElementKind::Rod2, vec![1, 9]).unwrap();
|
||||
m.add_set("bars", Set { elements: vec![9], ..Set::default() }).unwrap();
|
||||
m.add_material("Fibre", Material { elastic: Some(ortho), density: Some(1.6e-9) }).unwrap();
|
||||
m.add_material("Fibre", Material { elastic: Some(ortho), density: Some(1.6e-9), fluid: None }).unwrap();
|
||||
m.add_section(
|
||||
"bars",
|
||||
Section { set: "bars".into(), material: "Fibre".into(), kind: SectionKind::Rod { area: 1.0 }, formulation: Formulation::default() },
|
||||
|
||||
Reference in new issue
Block a user