explicit: deformable contact and friction, verified by bars, sliding blocks, the patch test and Hertz

Segment-to-segment penalty contact between element faces: each secondary
face and each main face facing it are projected onto the secondary face's
plane, split into triangles, clipped (Sutherland–Hodgman) and integrated
with a three-point rule per sub-triangle (Puso–Laursen segmentation, the
penalty at the integration points as Fischer–Wriggers), so a uniform
pressure gives the consistent nodal forces on both meshes and the contact
patch test passes on non-matching meshes. Every contact runs both ways at
half the penalty: pairs with each surface as the secondary, general and
self contact face against face. A bucket grid of face boxes every
increment, faces integrated in parallel and their forces added in face
order: the same numbers on any thread count.

The penalty per area ε = s γ min(m/A)/Δt² comes from the lumped masses,
each node's directional area and the stable increment, bounded by
Gershgorin's row sums so contact never shortens the increment. Coulomb
friction with exponential decay by a regularised return map at the
secondary nodes; rigid walls take Coulomb impulses. Contact work and
friction dissipation join the energy balance; each contact reports its
peak force, first and last contact, deepest penetration, friction and the
nodes adjusted at the start (initial penetrations adjusted strain-free or
refused with the node, face and depth); a cap on contact faces.

Verified (crates/explicit/tests/contact.rs, tests/oracle/explicit-*):
colliding bars (2L/c +1.2%, ρcAv₀/2, KE kept to 0.005%, contact energy
back to 8e-5 of it), blocks sliding to a stop on a rigid wall and on a
plate under constant and decaying friction (0.005–0.2%), the patch test
(σ_zz uniform to 0.06%), two spheres colliding against Hertz (peak +2.3%,
duration −0.4%; the oracle case waits for a graded sphere mesher), a free
body untouched by general contact, determinism across threads. Oracle
measures gain `over` (ratios). Existing fixtures do not move.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm

ROADMAP.md

@@ -33,10 +33,10 @@ pressure) is a degree of freedom of the existing DOF framework, not a separate s
 | M4 Own solver and first results | Element library per docs/elements.md (1D and 2D first); Linear static and modal solver (tet4/10, wedge6, hex8, hex20; sparse direct, Lanczos), verified against analytic solutions (solver: done — `fieldcraft-fem` kernels, `fieldcraft-solver` with nested dissection, sparse Cholesky and block Lanczos, `solve.static`/`solve.frequency`/`solve.probe`, patch, cantilever, Lamé, Kirsch and beam-frequency tests; reference points with kinematic and distributing couplings and moments by master–slave constraint elimination, verified by rigid motion, clamping, Saint-Venant tension, bending and tube torsion; 1D elements I: rod2/rod3 trusses, point masses, rotary inertia, springs and dashpots in both solvers and all three decks, verified by the method of joints, the three-bar truss, spring–mass, two-mass chain and torsional pendulum frequencies, and damped decay; 2D elements: plane stress, plane strain and axisymmetric tri3, tri6, quad4 (incompatible modes QM6), quad8 with two degrees of freedom per node, centrifugal loads, `mesh.planar` 2D meshes of polygons and planar faces, verified by patch tests, Kirsch, Lamé (plane strain and axisymmetric), rotating discs and cylinders, and a plane stress cantilever; deck mapping to Abaqus CPS/CPE/CAX, Nastran membranes, LS-DYNA ELFORM 12/13); shells and beams (done: quad4 MITC4 and tri3 MITC3 flat shells with a Hughes–Brezzi drilling rotation, two-node Timoshenko beams with profile properties and orientations, six degrees of freedom at shell and beam nodes shared with solids and trusses, section forces and surface stresses, verified by shell patch tests, Navier's plate, cantilever and portal-frame beams, and the Scordelis–Lo and pinched-cylinder benchmarks); results display (done: `results.*` commands, deformed shape to scale, banded contours of displacement, von Mises, principal and component stresses with a legend, mode shapes with their frequencies and animation, probing a node by clicking it, reaction force and moment sums per set, stale results marked after an edit; explicit steps: field frames by slider or animation with contours per frame, energy histories plotted) | started |
 | M5 Structured hex | 2D quad meshing of faces (`fieldcraft-mesh::quad`: transfinite mapped meshes, free all-quad meshes of polygons with holes on prescribed boundary nodes, exact planar quad validity, shared `SizeField` and even edge divisions; done for planar faces); mapped hex of six-sided regions (trivariate TFI, curved faces) and sweep meshing (multi-level extrusions with imprinted cross-sections, revolutions, one-to-one sweeps through linking faces; interval assignment, hex8/hex20 on the geometry, B-rep face tags, `mesh.hex.generate`/`sweep`/`mapped`: done, 16 of 21 corpus parts all-hex); conforming interfaces between cells (done: `mesh.hex.blocks` meshes a part split with SolidCraft's Split Body into mapped blocks as one conforming mesh — composite faces for seams and tangent faces, interval assignment over all cells, shared faces meshed once, grading off holes and fillets, free-internal-face check; the filleted bracket in 30 cells, hex20 within 0.1 % of a fine tet10 tip deflection); sweepable cells in a conforming mesh and tet–hex transition; automatic decomposition into sweepable and mappable regions, proposed as SolidCraft splits | started |
 | M6 Automatic hex | Octree/grid all-hex for any part (first version: done — `fieldcraft-mesh::octree`, `mesh.hex.octree`: 3-refinement grid with conforming templates refined by curvature, thickness and narrow faces, a core cleared to a manifold boundary, feature map onto it, padding and a pillow per patch capturing every sharp curve, foldover-free fitting, certified validity, B-rep face tags; the corpus hex column and the filleted-bracket oracle case; next: transitions for concave refined regions so thin and curved parts stop over-refining); hex-dominant by tet recombination; polycube for blocky parts; layers through thin walls; mesh editing and orphan-mesh import | started |
-| M7 Assemblies, contact and friction | Needs M15. Part instances from SolidCraft occurrences; tie between non-matching meshes (mortar); implicit contact: surface-to-surface mortar and node-to-surface, penalty and augmented Lagrange, self-contact, automatic pair detection with a bounding-volume search shared with explicit contact; friction: Coulomb with stick–slip, static/kinetic, anisotropic, pressure-, rate- and temperature-dependent coefficients; contact output (pressure, slip, status); thermal contact conductance and frictional heating; wear (Archard); bolt pretension, connectors with behaviour (elastic, damped, stops, locks); amplitudes, multiple steps, restart; nonlinear steps in all three decks. Verified by Hertz (sphere and cylinder), the Cattaneo–Mindlin partial-slip problem, the sliding block, NAFEMS contact benchmarks | planned |
+| M7 Assemblies, contact and friction | Needs M15. Part instances from SolidCraft occurrences; tie between non-matching meshes (mortar); implicit contact: surface-to-surface mortar and node-to-surface, penalty and augmented Lagrange, self-contact, automatic pair detection (the model's contact definitions, `interaction.contact.*` with `find`, the deck mapping, `fieldcraft_fem::contact`'s closest-point projection and bucket grid, and the explicit solver's segmentation and friction return map are in place to reuse; the implicit solver refuses contact by name until then); friction: Coulomb with stick–slip, static/kinetic, anisotropic, pressure-, rate- and temperature-dependent coefficients; contact output (pressure, slip, status); thermal contact conductance and frictional heating; wear (Archard); bolt pretension, connectors with behaviour (elastic, damped, stops, locks); amplitudes, multiple steps, restart; nonlinear steps in all three decks. Verified by Hertz (sphere and cylinder), the Cattaneo–Mindlin partial-slip problem, the sliding block, NAFEMS contact benchmarks | planned |
 | M8 Materials, explicit, shells, composites | Plasticity, hyperelasticity, damage data per solver; explicit dynamics decks (Abaqus/Explicit, LS-DYNA); midsurface shells; composite layups and material orientations, continuum shells on swept hex; hybrid (mixed u–p) hex8/hex20/tet10 for nearly incompressible materials (done); heat transfer (solids done: steady and θ-method transient conduction with flux, convection and sources, thermal strain in static steps (solids and 2D) and explicit dynamics (with plasticity), coupled temperature–displacement, `solve.heat`; deck output, 2D/shell/beam conduction planned) | started |
 | M9 Post-processing and deck readers | Results readers for public formats (Nastran OP2, LS-DYNA d3plot, Abaqus `.fil`); XY and path plots, cuts, display groups, free-body forces; deck readers that keep unknown keywords; mesh convergence studies | planned |
-| M10 Explicit dynamics | Shared element and material kernels with the implicit solver (`fem`); central-difference solver with lumped mass, stable time step, one-point hex8 with hourglass control and nodal-pressure tet4, bulk viscosity, energy accounting (X1 core: done — `fieldcraft-explicit`, `explicit_dynamic` steps with initial velocities, prescribed motion and planar rigid walls, `solve.explicit`/`solve.history`, small-strain linear elastic; bar wave, rigid-wall impact, energy balance and cantilever-period tests); large-deformation materials (X2: done — updated Lagrangian elements, Jaumann/Hughes–Winget and Green–Naghdi/Flanagan–Taylor rates, J2 bilinear/table plasticity, Johnson–Cook strength with heating and damage, erosion; materials gain `plastic`, `damage`, `erosion` with `model.material.plasticity`/`damage`; Dienes shear, rigid rotation, J2 uniaxial and Taylor-bar tests); contact (global search, penalty with friction, rigid walls); runs on hex and tet meshes | started |
+| M10 Explicit dynamics | Shared element and material kernels with the implicit solver (`fem`); central-difference solver with lumped mass, stable time step, one-point hex8 with hourglass control and nodal-pressure tet4, bulk viscosity, energy accounting (X1 core: done — `fieldcraft-explicit`, `explicit_dynamic` steps with initial velocities, prescribed motion and planar rigid walls, `solve.explicit`/`solve.history`, small-strain linear elastic; bar wave, rigid-wall impact, energy balance and cantilever-period tests); large-deformation materials (X2: done — updated Lagrangian elements, Jaumann/Hughes–Winget and Green–Naghdi/Flanagan–Taylor rates, J2 bilinear/table plasticity, Johnson–Cook strength with heating and damage, erosion; materials gain `plastic`, `damage`, `erosion` with `model.material.plasticity`/`damage`; Dienes shear, rigid rotation, J2 uniaxial and Taylor-bar tests); contact (X3: done — `interaction.contact.pair`/`general`/`find`, segment-to-segment penalty contact both ways with polygon clipping (passes the contact patch test on non-matching meshes), pairs, general (all exterior faces) and self contact, bucket-grid search, deterministic on any thread count, a penalty from the masses and the stable increment that never shortens it, Coulomb friction with exponential decay by a return map, friction on rigid walls, contact energy and friction dissipation in the balance, initial penetrations adjusted or refused; Abaqus `*CONTACT PAIR`/`*CONTACT`/`*FRICTION` and LS-DYNA automatic contacts in the decks; verified by colliding bars, sliding blocks, the patch test and Hertz's sphere impact); hyperelastic materials on the shared material point and mass scaling next; runs on hex and tet meshes | started |
 | M11 Equations of state and shells | Polynomial, ideal-gas, Mie–Grüneisen, JWL with programmed burn, tabulated; energy coupling; shock verification (Rankine–Hugoniot, Sod, Noh, Sedov); Belytschko–Lin–Tsay shells with self-contact on quad meshes | planned |
 | M12 CFD: lattice Boltzmann | D3Q19/D3Q27 on grids voxelised from the face-tagged surface; TRT, regularised and cumulant collision; interpolated walls, inlets and outlets; LES (Smagorinsky, WALE) with wall models; thermal LBM and conjugate heat transfer with the structure's thermal solver; non-Newtonian viscosity (power-law, Carreau–Yasuda, Cross, Herschel–Bulkley, Bingham) and temperature-dependent viscosity; porous media (Brinkman, Darcy–Forchheimer); multiphase and free surface (M13); validation by the lid-driven cavity, backward-facing step, cylinder wake (Strouhal) and turbulent channel; octree refinement shared with the hex mesher; wgpu backend (deterministic per device, checked against the CPU) (CPU core: done — `fieldcraft-lbm` with D3Q19 TRT and Guo forcing, halfway bounce-back and moving walls, slip and periodic faces, Zou–He velocity and pressure faces, exact voxelisation of obstacle bodies, momentum-exchange forces per face; fluid materials, fluid domains and fluid steps in the model; `model.fluid_domain.*`, `solve.fluid`; verified by Poiseuille channel and pipe, Couette, Taylor–Green decay, sphere-array Stokes drag and mass conservation; Schäfer–Turek 2D-1 as a benchmark) | started |
 | M13 Fluid–structure interaction | Immersed-boundary coupling of the lattice Boltzmann fluid with the explicit or implicit structure; interface force transfer; sub-cycling; Aitken then interface quasi-Newton coupling; free-surface flow | planned |
@@ -77,7 +77,7 @@ What exists and what is missing, by area; each gap is in a milestone above.
 | Area | Today | Missing |
 |---|---|---|
 | Solution procedures | Linear static, nonlinear static (solids with geometric and material nonlinearity: hyperelasticity, J2 plasticity), frequency (Lanczos), steady and transient heat, coupled temperature–displacement, explicit dynamics, LBM flow | Nonlinear shells and beams, arc-length, buckling (M15); implicit, harmonic, random and spectrum dynamics (M16) |
-| Contact, friction, adhesion | Explicit planar rigid walls (frictionless); couplings, springs, dashpots | Implicit and explicit deformable contact, tie, friction laws, thermal contact, wear (M7); cohesive adhesion and debonding (M20) |
+| Contact, friction, adhesion | Explicit deformable contact (pairs, general, self; segment to segment, penalty) with Coulomb friction and exponential decay; rigid walls with friction; couplings, springs, dashpots | Implicit contact, tie, anisotropic and pressure- or temperature-dependent friction, thermal contact, wear, eroding contact (M7, M10); cohesive adhesion and debonding (M20) |
 | Materials | Isotropic and orthotropic elasticity, density, thermal, J2 plasticity (bilinear, table, Johnson–Cook), Johnson–Cook damage and erosion, compressible neo-Hookean, Mooney–Rivlin and Yeoh hyperelasticity, Newtonian fluids | Elastomers beyond Yeoh (Ogden, Arruda–Boyce and the rest), viscoelasticity, viscoplasticity and creep, anisotropic and pressure-dependent plasticity, non-Newtonian viscosity, a cited material library and calibration (M17) |
 | Composites and anisotropy | Orthotropic constants | Orientations, layups, ply results, failure criteria, homogenisation (M18) |
 | Coupled fields | Thermal–structural (one way and coupled) | Piezoelectric, poroelastic, electro-thermal, acoustics (M19) |