explicit: deformable contact and friction, verified by bars, sliding blocks, the patch test and Hertz

Segment-to-segment penalty contact between element faces: each secondary
face and each main face facing it are projected onto the secondary face's
plane, split into triangles, clipped (Sutherland–Hodgman) and integrated
with a three-point rule per sub-triangle (Puso–Laursen segmentation, the
penalty at the integration points as Fischer–Wriggers), so a uniform
pressure gives the consistent nodal forces on both meshes and the contact
patch test passes on non-matching meshes. Every contact runs both ways at
half the penalty: pairs with each surface as the secondary, general and
self contact face against face. A bucket grid of face boxes every
increment, faces integrated in parallel and their forces added in face
order: the same numbers on any thread count.

The penalty per area ε = s γ min(m/A)/Δt² comes from the lumped masses,
each node's directional area and the stable increment, bounded by
Gershgorin's row sums so contact never shortens the increment. Coulomb
friction with exponential decay by a regularised return map at the
secondary nodes; rigid walls take Coulomb impulses. Contact work and
friction dissipation join the energy balance; each contact reports its
peak force, first and last contact, deepest penetration, friction and the
nodes adjusted at the start (initial penetrations adjusted strain-free or
refused with the node, face and depth); a cap on contact faces.

Verified (crates/explicit/tests/contact.rs, tests/oracle/explicit-*):
colliding bars (2L/c +1.2%, ρcAv₀/2, KE kept to 0.005%, contact energy
back to 8e-5 of it), blocks sliding to a stop on a rigid wall and on a
plate under constant and decaying friction (0.005–0.2%), the patch test
(σ_zz uniform to 0.06%), two spheres colliding against Hertz (peak +2.3%,
duration −0.4%; the oracle case waits for a graded sphere mesher), a free
body untouched by general contact, determinism across threads. Oracle
measures gain `over` (ratios). Existing fixtures do not move.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm

crates/engine/src/cmd/define.rs

@@ -266,7 +266,7 @@ fn fluid_boundary(s: &mut Session, p: &Value) -> Result<Value> {
 pub const STEP_CREATE: CommandSpec = CommandSpec {
     id: "model.step.create",
     label: "New Step",
-    params: r#"{"name": "Bend", "procedure": {"type": "static"} | {"type": "nonlinear_static", "nonlinear_geometry": true, "initial_increment": 0.1, "min_increment": 1e-5, "max_increment": 1.0 (fractions of the step), "max_increments": 100, "max_iterations": 16 (per increment), "tolerances": {"force": 1e-6, "displacement": 1e-5, "energy": 1e-10}, "line_search": false, "load_path": [[0, 0], [0.5, 1], [1, 0]] (optional: the load factor against the step fraction, piecewise linear from [0, 0] to fraction 1; increments end at its points)} (loads and prescribed displacements are the load factor times their values; it ramps from 0 to 1 without a load path) | {"type": "frequency", "modes": 10, "min_hz": 0, "max_hz": 500} | {"type": "fluid", "domain": "Flow", "end_time": 1.0 | "steps": 1000, "time_step": (default: chosen for Mach 0.087 and τ ≤ 1), "frames": 10, "magic": 0.1875 (the two-relaxation-time Λ)} | {"type": "explicit_dynamic", "end_time": 0.001, "dt_scale": 0.9, "max_increments": 10000000, "output_interval", "history_interval", "history_nodes": "set", "initial_velocities": [{"set", "velocity": [vx, vy, vz]}], "rigid_walls": [{"set", "point", "normal"}], "hourglass": {"type": "viscous|stiffness", "coefficient": 0.1}, "bulk_viscosity": {"linear": 0.06, "quadratic": 1.5}}, "output": ["displacement", "reaction_force", "stress", "strain"] (default by procedure), "boundary_conditions": [names], "loads": [names] (active in this step; nothing carries over between steps), "before": "step" (default: last)}"#,
+    params: r#"{"name": "Bend", "procedure": {"type": "static"} | {"type": "nonlinear_static", "nonlinear_geometry": true, "initial_increment": 0.1, "min_increment": 1e-5, "max_increment": 1.0 (fractions of the step), "max_increments": 100, "max_iterations": 16 (per increment), "tolerances": {"force": 1e-6, "displacement": 1e-5, "energy": 1e-10}, "line_search": false, "load_path": [[0, 0], [0.5, 1], [1, 0]] (optional: the load factor against the step fraction, piecewise linear from [0, 0] to fraction 1; increments end at its points)} (loads and prescribed displacements are the load factor times their values; it ramps from 0 to 1 without a load path) | {"type": "frequency", "modes": 10, "min_hz": 0, "max_hz": 500} | {"type": "fluid", "domain": "Flow", "end_time": 1.0 | "steps": 1000, "time_step": (default: chosen for Mach 0.087 and τ ≤ 1), "frames": 10, "magic": 0.1875 (the two-relaxation-time Λ)} | {"type": "explicit_dynamic", "end_time": 0.001, "dt_scale": 0.9, "max_increments": 10000000, "output_interval", "history_interval", "history_nodes": "set", "initial_velocities": [{"set", "velocity": [vx, vy, vz]}], "rigid_walls": [{"set", "point", "normal", "friction": {"static": 0.3, "kinetic": 0.2, "decay": 10} (Coulomb; default frictionless)}], "hourglass": {"type": "viscous|stiffness", "coefficient": 0.1}, "bulk_viscosity": {"linear": 0.06, "quadratic": 1.5}}, "output": ["displacement", "reaction_force", "stress", "strain"] (default by procedure), "boundary_conditions": [names], "loads": [names] (active in this step; nothing carries over between steps), "before": "step" (default: last)}"#,
     kind: CommandKind::Model,
     run: step_create,
 };