FEM foundation B: heat transfer and thermal stress (solids, 2D, explicit), coupled temperature–displacement, solve.heat (#45)

* Heat transfer and thermal stress: thermal materials, temperature BCs, heat loads, heat transfer and coupled temperature–displacement steps, solve.heat

Model: Material.thermal (conductivity, specific heat, expansion, isotropic or
per axis; reference temperature), BoundaryCondition::Temperature (dof 11),
loads SurfaceFlux, Convection, HeatSource and Temperature (a field in static
steps), procedures HeatTransfer { transient (θ-method) } and
CoupledTemperatureDisplacement; checks for missing conductivity/specific
heat/expansion. fem: heat conduction kernels (conductivity, capacity,
source, face flux/film, heat flux) on the DofLayout (one T per node), thermal
strain load and stress D(ε − ε_th) for every solid formulation incl.
incompatible modes. Solver: steady and transient heat transfer, thermal loads
in static steps, coupled steps (exact one-way coupling). Engine: solve.heat,
temperature/heat-flux result fields, probes. Decks refuse heat transfer by
name. Analytic verification: slab, source+convection/flux, thick cylinder,
erfc semi-infinite solid, free/constrained expansion, bimetal strip, coupled
step.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm

* thermal: strains in 2D elements and explicit dynamics

Plane::thermal_load and stresses_with for plane stress (εzz free), plane
strain (σzz = −D₃·ε_th) and axisymmetric elements, incompatible modes
included; the solver's 2D kernels take them. Explicit dynamics turns a
step's temperature loads into a per-element thermal strain rate (reached
linearly over the step) subtracted from each strain increment, so it feeds
J2 and Johnson–Cook updates. Verified: free expansion in every 2D theory
and element, a biaxially held plate, an explicit free bar (ΔL = αΔT L,
stress-free) and a clamped bar at −EαΔT, capped at the yield stress with
perfect plasticity.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm

* clippy

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm

* thermal: trusses take the axial thermal strain; keep the roadmap's M7 line

Truss::thermal_load and stresses_with project the thermal strain on the
member's tangent (Σ αₖ tₖ² ΔT); the static solver applies them to rod2/rod3
(#38). Explicit trusses take none yet and a warning says so.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm

---------

Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>

crates/solver/src/analysis.rs

@@ -14,7 +14,10 @@ use crate::constraints::{Budget, Reduction, coupling_rows};
 use crate::eigen::{Operator, Wanted, lanczos};
 use crate::ordering::nested_dissection;
 use crate::sparse::{Csr, NodeGraph, add_block, add_diagonal, add_scalar};
-use crate::system::{Mesh, Structural, StructuralKernel, inelastic_warnings, loads, prescribed, structural_body_forces, translation_block};
+use crate::system::{
+    Mesh, Structural, StructuralKernel, add_thermal_loads, inelastic_warnings, loads, prescribed, structural_body_forces, temperature_loads,
+    translation_block,
+};
 use crate::{Error, Limits, Result};
 
 /// Size and effort of a solution.
@@ -99,6 +102,8 @@ pub struct StaticResult {
     pub reaction_total: [f64; 3],
     pub stats: Stats,
     pub warnings: Vec<String>,
+    /// The temperatures of a coupled temperature–displacement step, per node.
+    pub temperature: Option<Vec<f64>>,
 }
 
 /// One natural mode.
@@ -293,17 +298,43 @@ fn budget(limits: &Limits, mesh: &Mesh, graph: &NodeGraph, matrices: usize) -> B
 }
 
 /// Solve a linear static step: the step named `step`, or the model's only static step.
+///
+/// A coupled temperature–displacement step is solved here too: its steady temperatures first
+/// ([`crate::heat`]), then the equilibrium with their thermal strains. The coupling is one-way
+/// (temperature strains the solid; deformation does not heat it), which is the whole of linear
+/// quasi-static thermoelasticity without thermoelastic dissipation, so solving the two in turn
+/// is the monolithic solution exactly.
 pub fn solve_static(model: &Model, step: Option<&str>, limits: &Limits) -> Result<StaticResult> {
     let resolved = model.resolve()?;
-    let step = model.select_step(step, |p| matches!(p, Procedure::Static {}), "static")?;
+    let step = model.select_step(
+        step,
+        |p| matches!(p, Procedure::Static {} | Procedure::CoupledTemperatureDisplacement {}),
+        "static or coupled temperature–displacement",
+    )?;
     let mesh = Mesh::new(model, &resolved, limits.max_dofs)?;
     let mut warnings: Vec<String> = resolved.warnings.iter().map(ToString::to_string).chain(mesh.warnings.iter().cloned()).collect();
     warnings.extend(inelastic_warnings(model));
+    // The temperature field: the coupled step's own heat solution, or the step's temperature
+    // loads.
+    let (field, temperature) = match step.procedure {
+        Procedure::CoupledTemperatureDisplacement {} => {
+            let (labels, t) = crate::heat::temperatures(model, &resolved, step, limits)?;
+            let at = |l: &u32| labels.binary_search(l).ok().and_then(|i| t.get(i)).copied();
+            (Some(mesh.labels.iter().map(at).collect::<Vec<_>>()), Some(mesh.labels.iter().map(|l| at(l).unwrap_or(0.0)).collect()))
+        }
+        _ => (temperature_loads(model, &resolved, &mesh, step)?, None),
+    };
+    if field.is_some() && !mesh.structural.is_empty() {
+        warnings.push("shells and beams take no thermal strain yet; the temperatures strain the solid, 2D and truss elements only".into());
+    }
     let (graph, order) = pattern(&mesh);
     ignored_dashpots(&mesh, &mut warnings);
     let setup = Setup { model, resolved: &resolved, mesh: &mesh, step };
     let red = reduction(&setup, true, &order, budget(limits, &mesh, &graph, 1), &mut warnings)?;
-    let f = loads(model, &resolved, &mesh, step, &red.active)?;
+    let mut f = loads(model, &resolved, &mesh, step, &red.active)?;
+    if let Some(field) = &field {
+        add_thermal_loads(&mut f, &mesh, field)?;
+    }
     let k = assemble(&mesh, &graph, None)?.k;
     if red.neq() == 0 {
         return Err(Error::Invalid("every degree of freedom is prescribed; there is nothing to solve".into()));
@@ -343,7 +374,8 @@ pub fn solve_static(model: &Model, step: Option<&str>, limits: &Limits) -> Resul
         let kernel = e.kernel()?;
         let at = |err| Error::element(e.label, err);
         let ue: Vec<[f64; 3]> = e.nodes.iter().map(|n| displacement.get(*n).copied().unwrap_or_default()).collect();
-        let points = kernel.stresses(&e.d, &ue).map_err(at)?;
+        let thermal = field.as_deref().and_then(|t| e.thermal_strain(t));
+        let points = kernel.stresses_with(&e.d, &ue, thermal.as_ref()).map_err(at)?;
         let values: Vec<[f64; 6]> = points.iter().map(|p| p.stress).collect();
         let (ty, rule) = (kernel.ty(), kernel.rule());
         let cached = extrapolations.iter().position(|(t, r, _)| std::ptr::eq(*t, ty) && *r == rule);
@@ -369,7 +401,8 @@ pub fn solve_static(model: &Model, step: Option<&str>, limits: &Limits) -> Resul
         let truss = t.truss()?;
         let at = |err| Error::element(t.label, err);
         let ue: Vec<[f64; 3]> = t.nodes.iter().map(|n| displacement.get(*n).copied().unwrap_or_default()).collect();
-        let points = truss.stresses(t.young, &ue).map_err(at)?;
+        let thermal = field.as_deref().and_then(|f| t.thermal_strain(f));
+        let points = truss.stresses_with(t.young, &ue, thermal.as_ref()).map_err(at)?;
         let nodal = truss.extrapolate(&points.iter().map(|p| p.stress).collect::<Vec<_>>()).map_err(at)?;
         for (n, s) in t.nodes.iter().zip(&nodal) {
             if let (Some(acc), Some(c)) = (sum.get_mut(*n), count.get_mut(*n)) {
@@ -432,6 +465,7 @@ pub fn solve_static(model: &Model, step: Option<&str>, limits: &Limits) -> Resul
         reaction_total,
         stats: Stats { dofs: mesh.dofs(), equations: red.neq(), factor_entries: chol.entries(), lanczos_vectors: 0 },
         warnings,
+        temperature,
     })
 }
 
@@ -585,6 +619,7 @@ pub enum Location {
 pub enum StepResult {
     Static(StaticResult),
     Frequency(FrequencyResult),
+    Heat(crate::heat::HeatResult),
 }
 
 impl StepResult {
@@ -592,6 +627,7 @@ impl StepResult {
         match self {
             StepResult::Static(r) => &r.step,
             StepResult::Frequency(r) => &r.step,
+            StepResult::Heat(r) => &r.step,
         }
     }
 
@@ -599,6 +635,7 @@ impl StepResult {
         match self {
             StepResult::Static(r) => &r.nodes,
             StepResult::Frequency(r) => &r.nodes,
+            StepResult::Heat(r) => &r.nodes,
         }
     }
 
@@ -611,6 +648,7 @@ impl StepResult {
         match self {
             StepResult::Static(r) => r.reference_points.iter().position(|p| p.label == label),
             StepResult::Frequency(r) => r.reference_points.iter().position(|p| p.1 == label),
+            StepResult::Heat(_) => None,
         }
         .map(Location::Point)
     }