mesh.size.set adds a size control on faces, bodies, a box or a sphere;
mesh.size.growth sets the growth rate; mesh.size.clear and
mesh.size.list. The tet mesher bakes the controls into its graded field,
the hex meshers, cells and the octree take the graded RegionSize, and
the block projection and mesh plans divide their edges by it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
The thinnest wall (measured to a facing wall) and narrowest patch give the cell size the grid
needs; the requested size refined that deep comes first, a root shrunk so one level fewer is
exact second; beyond the levels or cells allowed meshing fails at once naming the wall, levels and
cells. max_depth is a cap (default 4); rebuilds stay within the planned levels; lattice positions
no longer depend on the lattice depth; the report gives root size, levels, wall, patch and cells
per level before and after closure.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
geometry.face.split {name, face, datum} records a face split; it is
applied after the merges whenever the design is opened or cut again,
follows its datum (which it holds), undoes, and is saved with the
model. geometry.face.split.delete removes it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
For a body with features the sweep cannot mesh, mesh.plan replies a
decomposition: the cuts that box those features into one cell, the region,
and the commands that make the cuts and mesh the cells with pyramids. A plate
with a joined dome: 5 cuts, 17 hex cells swept together, the dome cell tet,
valid and conforming, end displacement in tension within 0.4% of all-tet.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
The owner's direction: bad nodes move to better places, the nodes within a reach follow by
the graph Laplacian's harmonic extension, edges held, nothing outside the reach moves.
mesh.node.relax strong mode takes below and reach and reports each round.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
A five-node pyramid, the conforming transition between a hexahedron's face
and tetrahedra: Bedrosian's rational shape functions with a collapsed (Duffy)
Gauss rule, a certified Jacobian on the base square with exact volume, a
scaled Jacobian, C3D5 / CPYRAM / LS-DYNA degenerate solid, VTK_PYRAMID and
the binary mesh code 13. A distorted hex8-pyramid5-tet4 transition mesh
passes the patch test and uniaxial tension exactly.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
geometry.stitch {name, surface, tolerance} records a stitch; the
surfaces keep what was read (TaggedSurface::original) and are stitched
again from it whenever a surface is imported, the model opened, or a
stitch added or deleted (geometry.stitch.delete). Opening a model also
warns about merges that no longer apply.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
A face merge may keep one of its faces' names (Merge::into, model
FaceMerge::into): absorbing a tiny face leaves the neighbour by its own
name, so sets on it still select it. Shape::absorbing_neighbour finds
the face a tiny one shares the longest edges with. geometry.face.absorb
absorbs one face (into a named or the best neighbour) or, from_check,
every small and sliver face the last geometry.check marked; check marks
now carry the small face they found.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
geometry.faces.merge {name, faces} records a face merge in the model;
it is applied after the partitions whenever the design is opened or cut
again, undoes through the journal and is saved with the model. Meshers,
mesh.plan (features and rings see merge:<name>; a merged face is
prismatic when its B-rep faces are), checks and the viewport see one
face, drawn in the warm colour. geometry.faces.merge.delete removes it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
The updater's release endpoint, docs, README, release notes and the Pages
URL point at the tangency-labs org. App IDs (io.github.jyviko.fieldcraft)
stay unchanged so installed copies keep their identity and settings.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
A nodal field at a node per frame (nonlinear static displacements from
load factor 0, explicit frames, heat temperatures) or per mode, the
explicit energies and histories, history nodes, and the frequencies or
buckling load factors; capped at 100000 points with `every`; stale
results refused; `path` writes a two-column CSV. XY Plot is ready.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
egui-wgpu's startup hook and the app's own steps (window, app setup, viewport
pipelines, first frame, running) go into the journal. On Windows,
native_crash.rs (adapted from SolidCraft, the only module allowed unsafe code;
the app crate now denies instead of forbids it) writes the exception code,
faulting module and offset and a minidump. A nightly/on-demand CI job runs the
app's tests on Windows, including a child that faults on purpose.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
#445 also closed the window on SIGHUP, which overrides the SIG_IGN that
`nohup fieldcraft &` sets so the app outlives its terminal. A safe API cannot
ask whether a signal was ignored at launch, so SIGHUP keeps its default.
SIGTERM and SIGINT still close the window the normal way.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
SIGTERM, SIGINT and SIGHUP ended the process on the spot: no last autosave,
and the crash journal left behind became an unclean_exit report at the next
start. The report on #248's machine ("ended without a clean exit between
commands (last: control ui.capture)") has that exact signature and is
reproduced by kill -TERM after a capture; 500 captures of the solved
crank-mirror (50 app runs), 30 CLI snapshots and 250 MCP headless
screenshots exited cleanly. The first signal now asks the window to close;
a second ends the process with the signal's default action.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
Static, frequency (per mode), nonlinear and explicit (per frame, with a
.pvd collection) and heat results; fluid steps are refused. Wedges keep
the model's node order: VTK 9's wedge has the same orientation.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
--section x|y|z[=VALUE] hides the elements on the camera's side of a plane
(at the mesh's middle by default) so the element faces inside show;
--field contours a nodal field of the solved step (results.contour). The
MCP server's headless screenshot draws with the viewport's pipeline on the
shared device and its reply, like snapshot's, names the renderer.
Refs #422
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
fieldcraft-cli snapshot script.json --out shot.png [--view] [--size WxH]
draws the engine's framed scene (engine::view::frame, shared with the CPU
render_png) with the viewport's GPU pipelines offscreen: hardware GPU, then
a software one, then the CPU rasterizer (FIELDCRAFT_GPU=auto|hardware|
software|cpu). CI installs lavapipe so the GPU path runs there.
Refs #422
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
The section comes from a set (a 2D mesh or element faces), the mesh already
on the source faces (tagged, or a neighbouring body's boundary lying on
them, whose nodes are shared so the meshes conform), or a fresh quad mesh
of one planar face. Target and side faces project through the tet mesher's
B-rep projection. Replaces the body's mesh like the other meshers, tags the
body's own source, target and side faces, and is on the MCP mesh tool as
hex_extrude.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
Deleting, suppressing or editing a partition (or its datum), or cutting a
meshed body, removes the meshes of the bodies that are gone, reported as
replaced, in the same undo step. model.check lists meshes of partition
cells the open design no longer has (a model saved before the cut
changed), and mesh.clear removes them, or the meshes of named bodies.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
The file is no longer committed: dependency pull requests from forks failed CI only because
it was out of date. The Dependabot workflow that regenerated it is gone. licences now fails
when a shipped crate names no licence and carries no licence file.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
Window captures (light theme, 1400 x 860) of every sample solved on the current UI; the
thumbnails that were viewport crops are now clean ui.render images like the others; the drop
test's figure at 0.1 ms reads 129 MPa.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
results.export.csv runs solve.probe or results.reactions and writes their reply as an RFC 4180
CSV: a row per node (node, x, y, z and the quantities the step has, columns it does not have
left out) or per set with the total and the applied load; numbers in shortest round-trip form,
so they read back bit for bit. A stale result is refused. The results panel has Export CSV…
beside Reaction sums and under the probed node: the save picker, or the form without one.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
results.contour takes range {min?, max?} (or "auto"), kept until the field changes: a
singular peak no longer squeezes the field into the bottom bands. Values above a clamped
maximum go to an extra band drawn in the over colour, split exactly at the clamp; the legend
shows that band up to the true maximum and says it is clamped. The results panel has Legend
max/min (Auto or a value), the MCP show_results tool a range argument, and headless pictures
follow the clamp too.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
diagnostics.crash_reports.delete deletes one report or all. The window lists each report
(when, what, how many times) with Report…, Copy Path and Delete, and Delete All; ui.prompt
answers it over the control channel.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
The README video's model as a sample: the corpus cantilever-i-beam design opened as geometry,
swept all-hex, clamped at F2:start, 1 kN on F2:top through a kinematic coupling; static step
Load. It has a Start-card thumbnail and a gallery capture; a test checks its tip deflection
against beam theory with shear.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
file.new replaces the session with an empty one: no design, mesh, definitions, results or
journal, nothing to save, the undo history empty. The File menu and Cmd/Ctrl+N run it, asking
first over unsaved changes. A sample name the app does not know (a typo, an old ?sample= link)
opens the samples to choose from, and the status names it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
