2183fdbe810e8c733365bca8f3c56784c2596d28
37
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 jyvikoandClaude Opus 5.5
|
2183fdbe81 |
solver: nonlinear static analysis by Newton–Raphson with automatic increments
solve.nonlinear follows a nonlinear static step in load increments: dead loads and prescribed displacements ramp with the load factor, a pressure follows the deformed faces (its load stiffness symmetrised so the supernodal Cholesky stays), the consistent tangent is refactored every iteration with an optional line search, and an increment converges on force, displacement and energy together. Increments start from the extrapolated last one, grow after fast convergence and are cut back on inversion, a non-finite or growing residual, an indefinite tangent or too many iterations; the step stops cleanly at the minimum increment, the increment cap or the Newton iteration limit. Elements are assembled in parallel in label order (same bits on any thread count). Results carry Cauchy stress, logarithmic strain, the increment history and a displacement frame per increment, which results.frame and the results panel show. Trusses, shells, beams, plane stress, incompatible modes, temperature and centrifugal loads are refused by name; couplings warn that they stay linear. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm |
||
|
jyvikoandClaude Opus 5.5
|
bc9fe2191a |
model: nonlinear static steps and neo-Hookean hyperelasticity, mapped by the deck writers
A nonlinear_static procedure (nonlinear geometry, initial/min/max increments, increment and iteration caps, force/displacement/energy tolerances, line search), validated with caps against hostile values. Materials gain an explicit hyperelastic option (decoupled compressible neo-Hookean on the isotropic constants). Abaqus writes *STEP, NLGEOM, INC / *STATIC with the increments and *HYPERELASTIC, NEO HOOKE; LS-DYNA writes the ramped implicit run with full Newton and *CONTROL_IMPLICIT_AUTO; Nastran refuses SOL 400 by name, as LS-DYNA does hyperelastic materials in nonlinear steps. Explicit dynamics refuses hyperelastic materials by name; solve.run names the solver still to come. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm |
||
|
jyvikoandClaude Opus 5.5
|
025c826dd4 |
results.deformed: scale 0 draws the undeformed shape
A factor of 0 was refused, so a picture sequence swinging the deformation out from the undeformed shape had to start at a small factor or switch `show` off. 0 is now a factor like any other (the view stays deformed), and the results panel no longer works around the refusal. The MCP show_results docs say so, beside `deformed: false`. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm |
||
|
jyvikoandClaude Opus 5.5
|
d5bd74570f |
Rename the project to FieldCraft
Crates fieldcraft-*, binaries fieldcraft and fieldcraft-cli, the .fieldcraft file (format tag fieldcraft/1, manifest fieldcraft.json), FIELDCRAFT_* environment variables, the MCP server name, egui widget ids (fc_*), the app icon document FieldCraft.icon and its generated family, docs and licences. No compatibility shim: no files of the earlier name exist. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm |
||
|
|
4ce5513210 |
Deterministic CPU multithreading: supernodal Cholesky, parallel elements, LBM blocks (#50)
* parallel: deterministic thread pool helpers for the solvers (fixed partitions, ordered results) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * solver: supernodal left-looking Cholesky, multithreaded with a fixed operation order Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * solver: parallel element matrices, stresses, Lanczos block solves and products (sums in the sequential order) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * explicit: element updates in parallel, nodal forces added in element order (bit-identical to the sequential loop) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * lbm: collision and streaming by fixed cell blocks in parallel, wall forces in link order (bit-identical) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * engine: threads setting for the solve commands (session default from MODELCRAFT_THREADS or the cores); bit-identity test on 1, 2 and 7 threads Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * docs: rayon threads in ADR 0001, the parallel crate, supernodal Cholesky Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm --------- Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com> Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
5afd1addb9 |
Structured hex: extrude, revolve, sweep and mapped all-hex meshing (M5) (#40)
* Structured hex meshing: multi-level extrude and revolve, one-to-one sweep, mapped blocks (M5) modelcraft_mesh::hex::hex_mesh meshes a face-tagged boundary surface with hexahedra by the first structured method that fits: a straight or rotational multi-level sweep (imprinted cross-section arrangement, cuts at reflex corners, mapped/annulus/free regions), a one-to-one sweep through rings of linking faces (least-squares affine layers with residual correction), or a mapped logical cube (trivariate transfinite interpolation). Interval assignment couples shared curves; boundary quads carry B-rep face tags; the certified validity gate, a tiling check and a fidelity check guard the output; hex20 mid-edge nodes go onto the faces. Shape::face_surfaces exposes the analytic face surfaces; the corpus runner gets a structured hex column. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * mesh.hex.generate: structured hex meshing as a command Meshes one body, every body of the open design or an imported surface, replaces the mesh, tags element faces with the B-rep faces (so sets by geometry resolve) and reports per body the method, counts and quality. The quality pass certifies each element once and feeds the validity gate (quality::validity_gate_checks). Shape::size gives the cached body size for defaults instead of a full measure. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * Hex: disk O-grids, convex interval cost, early size guard, hex20 corpus column Smooth single-loop sections (cylinders, tori, vases) get a butterfly O-grid instead of the free mesher; interval assignment raises counts by the squared relative error so equal sides share increments evenly; a mesh far beyond the element limit is refused before any work and mapped limits are no longer swallowed. The corpus reports hex8 and hex20 quality. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * Catalogue: structured hex commands ready (mesh.hex.sweep, mesh.hex.mapped, mesh.hex.generate) mesh.hex.sweep and mesh.hex.mapped run mesh.hex.generate with the sweeping methods or the mapped one; mesh.hex.generate is the sweep entry's related command. The planned M6 octree entry moves to mesh.hex.octree (its icon renamed with it). docs/features.md regenerated. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * Docs: structured hex literature (B8), architecture, roadmap, parity; corpus hex column Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * Hex: simplify review fixes Prepare each sweep frame's cross-section once (arrangement, cuts, fill) and reuse it across refinement retries; candidate frames come from one setup pass. Edge triangles come from the feature edges, layer counts go through size::edge_divisions, sweep residual weights are computed once per node, flux shape functions live on the stack, and the arrangement's exact side test and distances serve the region probe. The engine takes the boundary options mesh.tet.generate takes and names unnamed faces by index like it; the corpus hex20 run reuses the winning method; the mapped entry lists mesh.hex.generate too; the octree icon is redrawn under its new id. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * Regenerate docs/features.md and docs/meshing/corpus.md after rebasing Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * Regenerate docs/features.md and docs/meshing/corpus.md after rebasing onto main Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * Regenerate docs/features.md and docs/meshing/corpus.md after rebasing onto main Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * Regenerate docs/features.md and docs/meshing/corpus.md after rebasing onto main Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * Regenerate docs/features.md after rebasing onto main Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * Regenerate docs/features.md after rebasing onto main Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * Regenerate docs/features.md after rebasing onto main Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm --------- Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com> Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
0899587127 |
MCP server: modelcraft-cli mcp (headless or bridged), read/write roots, end-to-end analysis over MCP (#48)
* io: read and write roots that confine an automation client's file access Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * engine: every file a command reads or writes is checked against the session's roots Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * engine: headless pictures of a session (model, geometry, deformed shape and contours) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * mcp: MCP server over stdio with headless and connected backends, roots and caps Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * cli: modelcraft-cli mcp [--connect ADDR | --headless] with automation read and write roots Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * mcp: end-to-end analysis of a corpus part over MCP (open, tet mesh, define, solve, probe, render) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * docs: MCP server (docs/mcp.md), Claude Code setup, roots; architecture, README, roadmap, attribution Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm --------- Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com> Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
e900f41ce3 |
FEM foundation B: heat transfer and thermal stress (solids, 2D, explicit), coupled temperature–displacement, solve.heat (#45)
* Heat transfer and thermal stress: thermal materials, temperature BCs, heat loads, heat transfer and coupled temperature–displacement steps, solve.heat
Model: Material.thermal (conductivity, specific heat, expansion, isotropic or
per axis; reference temperature), BoundaryCondition::Temperature (dof 11),
loads SurfaceFlux, Convection, HeatSource and Temperature (a field in static
steps), procedures HeatTransfer { transient (θ-method) } and
CoupledTemperatureDisplacement; checks for missing conductivity/specific
heat/expansion. fem: heat conduction kernels (conductivity, capacity,
source, face flux/film, heat flux) on the DofLayout (one T per node), thermal
strain load and stress D(ε − ε_th) for every solid formulation incl.
incompatible modes. Solver: steady and transient heat transfer, thermal loads
in static steps, coupled steps (exact one-way coupling). Engine: solve.heat,
temperature/heat-flux result fields, probes. Decks refuse heat transfer by
name. Analytic verification: slab, source+convection/flux, thick cylinder,
erfc semi-infinite solid, free/constrained expansion, bimetal strip, coupled
step.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* thermal: strains in 2D elements and explicit dynamics
Plane::thermal_load and stresses_with for plane stress (εzz free), plane
strain (σzz = −D₃·ε_th) and axisymmetric elements, incompatible modes
included; the solver's 2D kernels take them. Explicit dynamics turns a
step's temperature loads into a per-element thermal strain rate (reached
linearly over the step) subtracted from each strain increment, so it feeds
J2 and Johnson–Cook updates. Verified: free expansion in every 2D theory
and element, a biaxially held plate, an explicit free bar (ΔL = αΔT L,
stress-free) and a clamped bar at −EαΔT, capped at the yield stress with
perfect plasticity.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* clippy
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* thermal: trusses take the axial thermal strain; keep the roadmap's M7 line
Truss::thermal_load and stresses_with project the thermal strain on the
member's tangent (Σ αₖ tₖ² ΔT); the static solver applies them to rod2/rod3
(#38). Explicit trusses take none yet and a warning says so.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
---------
Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
|
||
|
|
bf325bb234 |
Craft-family shell, native file dialogs, samples and one-click Solve (#46)
* Native file pickers, background opening, drag and drop and recent files Open (models, SolidCraft designs and tagged meshes in one picker), Save, Save As, Write Deck and Recover go through the host's file pickers (rfd in the desktop app, injected as Services so the UI crate stays portable and tests answer them). Files open on a copy of the session in a worker thread and replace it only on success; files dropped on the window or named on the command line open the same way. A recent-files list, an unsaved-changes prompt, Cmd/Ctrl+O/S/Shift+S. Programmatic calls never open a picker: ui.start opens the form. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * Samples and one-click Solve: results reachable from the window file.sample {name} opens a ready-to-run sample (the two parts, the cantilever with static and frequency steps, the bar impact) in place of the model; solve.run solves every step in order. Help > Samples, the empty viewport's start screen and the Tools > Samples entry open them (asking first over unsaved changes); Solve runs in the background like a file opening and the Results tab comes up. --sample [parts|cantilever|impact] on the command line. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * The Craft-family shell: title bar, workspace ribbon, browser, context panel, timeline The window now follows SolidCraft's and VectorCraft's layout and themes: - title bar with the mark, quick actions (File menu, save, undo, redo, Solve, search, theme, help), the model's document tab and the version; integrated under the macOS traffic lights, own caption buttons and resize zones elsewhere (titlebar.rs); - workspaces (Prepare, Model, Analysis, Results) with their tabs, and panels of icon buttons whose labelled drop-downs list the whole catalogue, coming-soon entries greyed with their milestone; panels collapse, then go into a » menu, when narrow; - the browser: geometry and mesh with eye toggles, definitions with counts, results; - no permanent Commands list: command search (S, Cmd/Ctrl+K) and a command line; - the context panel on the right only with context: the command form, results controls, the selected definition's properties with Edit and Delete; - navigation bar and orientation gizmo in the viewport; the journal timeline at the bottom with undo positions; - SolidCraft's light and dark tokens; craft-ui (IconButton, Tab, WidgetPalette). Menus and the search are view state (ui.set {menu, palette}), so captures show them. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * Shell polish, docs and licences Menus painted as the family's (flat File menu with recent files, decks and samples), the legend sized to its text, two-line panel labels inside the ribbon, glyphs the UI font has, offscreen captures without fade-in, ui.start runs in-window file actions (samples, recover, solve) but never a native picker, ui.select. Control protocol, architecture, ROADMAP, AGENTS and ATTRIBUTION updated; THIRD-PARTY-LICENSES.txt with craft-ui and rfd. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * Title bar mark from the application icon; fluid steps and domains in the shell The title bar draws the app icon's bracket (assets/app-icon/icon-small.svg's faces) as SolidCraft draws its mark; the window keeps its title-bar flags after the rebase. solve.run solves fluid steps too (solve.fluid); the browser lists fluid domains. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * Simplify: cached per-frame data, one command per timeline roll, workspace setters - Icon textures are kept per pixel size (the shell draws several sizes a frame; the cache used to clear on every size change and rasterise again). - Opening a model or recovering one starts from an empty session instead of copying the current one; the replaced session is freed off the window thread. - Element counts, timeline items, search results and the selected definition's properties are cached until what they show changes; timeline tooltips are built on hover; long lists in properties are summarised. - edit.undo and edit.redo take a count: a timeline click is one command. - solve.run dispatches on the step's procedure (no string round trip) and reports its name. - The workspace and tab change together through UiState::select_tab/select_workspace (ui.set {workspace} alone now sticks); no per-frame syncing. - One busy guard, Kind::verbs, a fit flag for background jobs, ModelApp::home_view, the title bar's actions as an enum, dead code removed. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * Title bar: Solve and tools at the right end; no traffic-light inset in full screen The owner's feedback on the title bar: Solve, search, theme and help sit at its right end before the version; on macOS the left group (mark, name, quick actions) moves into the traffic lights' room in full screen, where there are none, and back when leaving it. The layout is a pure function (bar_layout) tested for both states, narrow windows and custom caption buttons. ui.fullscreen {on} for agents. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * Caps labels in Inter SemiBold egui has no bold weight of its default font, so the ribbon's tabs and panel labels, the workspace switcher and its menu, menu headings, the browser header, the context panel's headers and the Solve label were thin, especially in the light theme. They now use a label font family: Inter SemiBold 4.1 (SIL OFL 1.1, unmodified, fonts/OFL.txt, ATTRIBUTION.md), with egui's fonts as fallback, installed with the theme on the live and offscreen contexts. theme::label_font falls back to the default font until the family is bound (fonts take effect from the next pass), so nothing can panic. Panels widen to their label's longest word. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * docs: regenerate features.md after rebase Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm --------- Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com> Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
29ae46ff84 |
Shells and beams: MITC4/MITC3 shells, Timoshenko beams, six-DOF nodes (M4) (#47)
* fem: MITC4/MITC3 flat shells and Timoshenko beams with profile properties (ElementDofs STRUCTURAL) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * solver: shells and beams on the DofLayout beside solids, 2D elements and trusses; analytic verification and tagged benchmarks Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * engine: probe rotations, reaction moments and shell and beam element results; docs for shells and beams Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm --------- Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com> Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
jyvikoandClaude Opus 5.5
|
84e81acf3a |
mesh.block: 2D patches (quad4, quad8, tri3, tri6) with arc and ellipse edges
A four-sided planar patch at z = 0, meshed by the Coons transfinite interpolation of its edges for plane stress, plane strain and axisymmetric sections: the elements fill a named face of the body, edges and corners carry names, patches join edge to edge (the join check treats the edges of 2D elements as their sides). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm |
||
|
jyvikoandClaude Opus 5.5
|
6dda34e837 |
simplify: joining in modelcraft-mesh::join, shared label helper, run_script returns step outputs
Weld and face-to-face check move from the mesh.block command to modelcraft_mesh::join (bounding-box-limited weld, grid-binned hanging-node test), for node merging and imports to reuse. mesh.block and mesh.tet.generate share fresh_labels. The block map evaluates each edge curve once per lattice parameter; vector helpers come from vec3; tet10 and hex20 mid-side nodes follow ElementKind::edges. Session::run_script returns each step's output, which the oracle reads instead of its own loop. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm |
||
|
jyvikoandClaude Opus 5.5
|
cbff230734 |
docs: oracle in architecture and roadmap; fmt
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm |
||
|
jyvikoandClaude Opus 5.5
|
6d9452ad84 |
Verification oracle: tests/oracle cases, cargo xtask oracle, fixtures, docs/oracle.md, CI job
The oracle binary (modelcraft-testkit) runs each case's recipe through the command engine, measures its quantities by JSON pointers into step outputs or commands, compares them with the cited references and the frozen fixtures, and writes docs/oracle.md. 20 theory cases (patch tests of every solid element, Timoshenko cantilevers, Lame, Kirsch, beam frequencies, torsion and bending through couplings, explicit waves and impact, CDT invariants), 8 published benchmarks (MacNeal-Harder patch, straight and curved cantilevers, thick cylinder, Scordelis-Lo with solids, NAFEMS LE1, LE10, FV32) and 10 pending cases with citations. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm |
||
|
jyvikoandClaude Opus 5.5
|
a3cb6d749b |
mesh.block: mapped hex, tet and wedge blocks with curved edges; solve.probe at points
A structured mesh of a six-sided block from its corners, with circular and elliptical edges (Gordon-Hall transfinite interpolation), grading, named faces, edges and vertices as geometry tags, and joining to the existing mesh face to face (refused otherwise). solve.probe takes "at" points and reports the nearest node with a result. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm |
||
|
|
15a9ac9157 |
1D elements I: trusses (rod2, rod3), point masses, rotary inertia, springs and dashpots (#38)
* Model, fem and decks: point masses, rotary inertia, springs, dashpots and rod3 trusses Model: PointMass and Spring definitions (spring | dashpot; to ground or two-point; along a degree of freedom, a vector or the line of the ends) on a set or reference point, resolved per node; ElementKind::Rod3. fem: rod2/rod3 truss kernel on Basis::Line2/Line3 declaring ElementDofs (translations). Decks: Abaqus T3D3, MASS, ROTARYI, SPRING1/2/A, DASHPOT1/2/A; Nastran CONM1, CELAS2, CDAMP2; LS-DYNA ELEMENT_MASS/INERTIA and ELEMENT_DISCRETE; what a format cannot take is reported. Commands model.mass.* and model.spring.*. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * Implicit solver: trusses, point masses, rotary inertia and springs on the DofLayout Trusses declare their translations like solids; point masses, inertia and springs ask the layout for the kinds they need at their nodes (translations, rotations), and reference points they use get six degrees of freedom. The matrix pattern takes rows for those points; dashpots are ignored with a warning. Existing results are bit-identical (hash-checked). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * Explicit solver: trusses, point masses, springs and dashpots on the node-major layout Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * docs: fem.md on trusses and discrete elements in the layout; regenerate features.md Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * docs: trusses in plane models and corotational explicit trusses Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm --------- Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com> Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
5e5a2ae251 |
Fast PR CI: small hostile-test caps, heavy tests in a separate job (#43)
* test: hostile-params test runs under small session work caps Session gains Limits, the defaults of mesh.tet.generate's max_steiner and max_tets (production values unchanged; a parameter still overrides them; file.open keeps them). The registry-wide hostile-params test runs on sessions with small caps, so the needle-triangle tessellation it meshes is refused at once instead of meshing to the 50k Steiner cap: the engine test binary drops from ~350 s to ~20 s locally. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * ci: move heavy tests to a heavy job on main, nightly and on demand Four slow tests are #[ignore = "heavy: ..."] (every corpus recipe, the cantilever convergence study, the explicit-vs-modal cantilever period, the generic-predicate rational cross-check); fast representative tests of each area stay in the PR gate. cargo xtask test --heavy runs every ignored test (benchmarks included) and the doc tests; cargo xtask test and ci run the rest without the doc tests. The new heavy CI job runs it on pushes to main, nightly and on workflow_dispatch. Branch jobs restore main's rust cache and no longer save their own. AGENTS.md documents the rule. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * test: the three slow LBM verification cases run in the heavy job The Stokes-drag sphere array, the staircase-pipe convergence study and the developing-channel case are heavy (21 s, 11 s, 6 s alone); plane Poiseuille, Couette, Taylor-Green, reproducibility and the stability limits stay in the PR gate. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm --------- Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com> Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
jyvikoandClaude Opus 5.5
|
50764def18 |
Explicit X2: large deformation, J2 and Johnson-Cook plasticity, damage and erosion (M10)
- model: materials gain solver-neutral plastic (bilinear isotropic/kinematic, hardening table, Johnson-Cook with adiabatic heating), damage (Johnson-Cook D1-D5) and erosion (plastic strain); explicit steps gain nonlinear_geometry (default on) and stress_rate (jaumann | green_naghdi). - fem: rotation (Hughes-Winget, Flanagan-Taylor), plasticity (radial return, capped bracketed Newton for Johnson-Cook, damage; the update takes the mechanical strain increment so thermal strains can be subtracted), closed-form hex8 gradients for deformed configurations. - explicit: updated Lagrangian hex8/tet4, per-element material state, erosion with reported energy, plastic work in the energy account. - solver: warns that the linear solver uses the elastic constants of plastic materials (results hash-identical). - decks: Abaqus *PLASTIC (+ Johnson-Cook keywords), Nastran MATS1/TABLES1, LS-DYNA *MAT_PLASTIC_KINEMATIC / *MAT_PIECEWISE_LINEAR_PLASTICITY; what a format cannot express is reported as Unsupported. - engine: model.material.plasticity, model.material.damage (catalogue ready), explicit element probe, eroded elements in the solve summary. Step commits before the rebase onto the DOF framework: branch explicit-x2-steps. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm |
||
|
|
4c0fcc80ad |
2D elements: plane stress, plane strain and axisymmetric sections on the DOF framework; mesh.planar (M4) (#39)
Model: planar section kinds with Extent, element edges in sets, edge-weighted 2D loads,
centrifugal load, 2D model checks. fem: Plane kernels on Basis::{Tri3,Tri6,Quad4,Quad8}
declaring ElementDofs::new(DofSet::PLANE); QM6 incompatible modes with the
Wilson-Ibrahimbegovic correction. Solver: Kernel enum on the DofLayout; 3D results
bit-identical (hash-checked). Decks: Abaqus CPS/CPE/CAX, Nastran membranes and RFORCE,
LS-DYNA ELFORM 12/13. Mesh: free triangle mesher, planar region meshing, face boundaries.
Engine: mesh.planar with tagged edges. Analytic verification suite in solver/tests/plane.rs.
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
|
||
|
|
a17752a49f |
Lattice Boltzmann flow on the CPU: model, solver, engine (M12) (#36)
Model: Newtonian fluid materials; fluid domains (box, spacing, conditions on the box faces, obstacle bodies with conditions on their named faces, initial velocity, body acceleration); fluid steps with caps. Deck writers refuse fluid steps; a fluid-only model needs no mesh in model.check; one step selector (Model::select_step) for every solver. New L2 crate modelcraft-lbm: D3Q19 two-relaxation-time collision with Guo forcing; halfway bounce-back walls (moving walls after Ladd), slip faces, periodic pairs; Zou–He velocity and pressure faces with the D3Q19 transverse correction; obstacles voxelised from the face-tagged boundary surface with exact predicates and symbolic perturbation; momentum-exchange forces per box face and per B-rep face; unit conversion, automatic time step and Mach/tau limits; bounded runs with frames and force histories. Engine: model.fluid_domain.create/edit/delete, model.fluid_domain.boundary, solve.fluid (obstacles from the open design or imported surfaces, lowerable caps), solve.probe for fluid fields and wall force histories. Fluid Domain, Inlet & Outlet and Lattice Boltzmann toolbar entries are ready. Verification (analytic): plane Poiseuille exact with Λ = 3/16 and second order (2.000) with Λ = 1/4; Couette exact with the wall shear; Taylor–Green decay second order (2.01, 2.00); staircase pipe; Stokes drag of a sphere array within 1.7% of Hasimoto at R = 6; Zou–He channel; mass conserved to round-off; bit-for-bit reproducibility. Benchmark: Schäfer–Turek 2D-1. Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com> Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
0e97f8dd1d |
Results display (M4) and offscreen full-UI capture (#28)
* ui.capture: the whole window drawn offscreen and rasterised on the CPU ui.screenshot falls back to it when no frame is presented (hidden window, locked screen), so agents can look at panels and the toolbar. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * Draw the open design and imported surfaces in the viewport DisplayMesh keeps node labels on every element primitive (for results), gains add_surface (geometry faces and their boundaries, coincident points welded) and displaced (elements moved by nodal offsets). Bodies are tessellated at a thousandth of their size; meshed models show the geometry as boundaries only. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * results.* commands: deformed shape, contours, mode shapes, animation, reaction sums The results display is session state (ResultsView), set by commands that are not edits. Nodal fields (displacement, von Mises, principal and component stresses; principal stresses in closed form after Smith 1961) and reaction force and moment sums per set. Results kept from an earlier revision stay viewable, marked stale; solve.probe says when a result is stale. The Results tab's display and reaction entries are ready. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * Results display: deformed shape, contours with legend, mode shapes and animation, probe, reaction sums The viewport draws the session's results view: elements moved by their nodes' displacements or a mode shape (automatic or given scale), faces split exactly along contour band boundaries into flat-coloured pieces (same on GPU and CPU), a legend with levels and extremes, a results panel whose controls run the results.* commands, a click probing the nearest node (solve.probe), and stale results marked. Solving from the form shows the result on the Results tab. sample::cantilever is a solvable model for tests and demos. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * Simplify the results display (review) One Contour in the plot; the results scene reuses scene::build; a solve shows its result through the engine (ResultsView::for_result) and the UI raises the Results tab when a view appears; the plot's scale and contour values are kept across animation frames; design bodies are tessellated once per design; the first content is framed where the display is rebuilt; field_values in one match; probe reuses results::displacements. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * Results display for explicit steps: field frames, energy histories The results view works on the engine's step results (static, frequency, explicit): ResultsView.frame and results.frame {frame | time} pick an explicit field frame; the deformed shape (true scale) and contours (element stresses averaged to the nodes, velocity) follow it; animation runs through the frames. The Results panel has a frame slider and plots the kinetic, internal, hourglass and external energies with their values at the frame. sample::impact is a steel bar flying onto a rigid wall. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * docs/features.md after the rebase Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm --------- Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com> Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
aa68bbbcdf |
Constrained Delaunay tetrahedralization (boundary recovery) and mesh.tet.generate (M2) (#29)
* predicates: LNC points, generic insphere and its perturbed form (Diazzi et al. 2023 §4.3) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * mesh: constrained Delaunay tetrahedralization (segment recovery with LNC Steiner points, gift-wrapping facet recovery, labelling) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * cdt: rounding repair, mesh.tet.generate, corpus CDT column; review cleanups (shared perturbation rule, one facet scan, cached coordinates, worklist segment recovery) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * mesh.tet.generate is ready in the catalogue; corpus table with the CDT column Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm --------- Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com> Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
d45a2da5b5 |
Explicit dynamics core: central differences, one-point hex8 with hourglass control, nodal-pressure tet4, solve.explicit (M10 X1) (#27)
* Model: explicit dynamic steps (end time, increment scale and cap, output intervals, initial velocities, rigid walls, hourglass and bulk viscosity controls); deck writers refuse them Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * fem: uniform-strain hex8 and tet4 kinematics, Flanagan–Belytschko hourglass shape vectors, element frequency bound Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * Explicit solver crate (L2): central differences with lumped mass, one-point hex8 with Flanagan–Belytschko hourglass control, Bonet–Burton tet4, bulk viscosity, rigid walls, energy account; wave and impact verification Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * Engine: solve.explicit and solve.history commands, explicit results in the session and solve.probe; cantilever period against the modal solver Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * Docs: explicit solver in the architecture, roadmap (M10 started), parity and literature (Part H) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * Simplify: Model::select_step shared by both solvers, Procedure::sets/is_dynamic, fused per-increment passes without allocation, shared element tail, generic command caps Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * Catalogue: solve.explicit is ready; solve.history beside solve.probe Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * Rebase onto the implicit couplings work: Procedure is no longer Copy Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm --------- Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com> Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
48039639cb |
Implicit solver: reference points, couplings, moments, wedge6 (M4) (#26)
* fem: wedge6 element (triangle × interval, 3 × 2 points), patch and cantilever tests Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * solver: reference points, kinematic and distributing couplings, moments by constraint elimination Coupled reference points get six degrees of freedom; kinematic couplings are rigid links, distributing couplings least-squares interpolation constraints. Every constraint row and prescribed value is eliminated master-slave (Abel-Shephard pivot choice), so the reduced matrix stays SPD; no coupling gives the old elimination bit for bit. Verified: rigid motion of a coupled block, clamping through a point, distributing tension vs pressure, bending and tube torsion. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * engine: reference point results in solve.static and solve.probe Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * docs: couplings, moments and wedge6 in the solver docs, literature and roadmap Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * solver: simplify constraint elimination and reference point plumbing Rows combine by one sort; T_f transposed once; K and M reduced in one pass on a shared pattern; prescribed motion computed once; reference point loads and BCs go through Resolved like node ones (Mesh::label_dofs); one dof-direction rule; StepResult::locate for probes; dead Csr::restrict removed. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * solver: refuse oversized reductions before allocating them A held distributing coupling point makes a dense (3N)^2 block; estimate it from the constraint rows and refuse it against the factorization's memory budget with a clear message, before anything is built. Other reductions with dependents count their entries first (stopping at the budget) and reserve fallibly. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm --------- Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com> Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
40f98f0af9 |
Implicit solver: fem kernels (tet4/10, hex8, hex20), sparse Cholesky, block Lanczos, solve.* commands (M4) (#23)
* Renumber the layer table for solver crates: fem at L1, solver at L2, fsi at L3 L0 model -> L1 geometry, mesh, fem, decks, render -> L2 solver (explicit, lbm later) -> L3 fsi (later) -> L4 doc -> L5 io -> L6 engine -> L7 ui-egui, mcp -> apps. UI_MIN_LAYER moves to 7, the testkit sits above it. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * modelcraft-fem: element kernels for tet4, tet10, hex8 (full, incompatible modes), hex20 (full, reduced) Shape functions, Gauss and conical-product quadrature, stiffness, consistent and HRZ-lumped mass, body forces, consistent pressure loads on faces, integration-point stresses and their least-squares extrapolation to nodes, isotropic and orthotropic elasticity. The element table is one row per kind, so wedges, shells and beams are added locally. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * modelcraft-solver: linear static and frequency analysis with an analytic verification suite Assembly from the resolved model on the node graph, boundary conditions by elimination, consistent pressure, gravity and body-force loads, nested-dissection ordering, sparse up-looking Cholesky with a factor-size cap, reactions, integration-point and nodal-averaged stresses, von Mises; shift-invert block Lanczos with full reorthogonalization for natural modes, participation and effective mass. ADR 0001 records the own-linear-algebra decision (determinism, wasm). Verified against closed forms: displacement and traction patch tests for every element, cantilever tip deflection (Timoshenko) with convergence rates, Lamé cylinder, Kirsch hole (Kt -> 3), cantilever and free-free beam frequencies with six rigid-body modes. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * Engine: solve.static, solve.frequency and solve.probe; results kept in the session Results are stored per step, restored on a failed command and cleared when the model changes. Caps (degrees of freedom, factor entries, Lanczos vectors) may only be lowered; hostile parameters are tested against a solvable session. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * docs: implicit solver architecture, roadmap M4, parity and references Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * Simplify the solver: shared face integration, block assembly, cached extrapolation - model: one face integrator (nodal::face_normal_weights) for tractions and pressures - fem: mid-side tables from ElementKind::edges, orthotropic via inverse3, symmetric accumulation without a symmetrize pass, incompatible-mode recovery without K_uu, model's coordinate check, dead table rows removed - solver: one pattern search per node pair (block, scalar and diagonal adds), extrapolation built once per element type, reactions from the prescribed rows only, matrices dropped after restriction, the free-body shift keyed on the factorization error, step selection in the solver, Error::Element naming the element - engine: the solver owns the default step and the shift check; the model comparison runs once Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * docs: results are stamped with the session revision Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm --------- Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com> Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
81fa8d7220 |
LS-DYNA keyword writer (implicit static and eigenvalue, M3) (#25)
* decks: LS-DYNA keyword writer (long format, implicit static and eigenvalue) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * decks: LS-DYNA golden files, Jacobian-sign node-order tests, re-reader and refusals Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * docs: LS-DYNA writer status and deck notes Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * decks: simplify the LS-DYNA writer (plan decides once, cards written in place, shared test tables) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * decks: LS-DYNA joins FORMATS (deck.write lsdyna), refusals reported together, shared concentrated loads Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * decks: LS-DYNA on main's shared deck API (steps parameter, model helpers) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm --------- Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com> Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
f4a0333d28 |
Nastran bulk data writer (SOL 101/103) and deck.write steps (M3) (#24)
* Nastran bulk data writer: fixed-format entries, exact large-field reals, SOL 101/103 decks Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * Nastran writer tests: golden decks, a re-reader of our output, node order against Nastran's conventions Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * docs: Nastran writer in the roadmap, parity table and deck notes Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * Nastran writer: simplify planning (subcases, one property table), stream cards into the deck, write through the VFS ElementKind::corner_count/is_quadratic and Dofs::bits/from_bits join the model. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * Nastran joins the shared deck formats; deck.write chooses steps for every format nastran::write_resolved is the FORMATS row; Format::write_steps and with_steps write a subset of steps (a Nastran run is static or frequency steps); problems go through the shared unsupported(). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm --------- Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com> Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
a71f85eb58 |
Abaqus input writer and deck.write (M3) (#22)
* decks: Abaqus input writer with golden decks, read-back, Jacobian and unsupported tests Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * engine: deck.write command (format dispatch, atomic file write), docs Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * decks: format table, one resolve per write, direct buffer writes; engine: shared path parameter Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm --------- Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com> Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
2d99a8571c |
The .modelcraft file, undo/redo on the journal, atomic saves and autosave recovery (M3) (#21)
* modelcraft-io: the .modelcraft file (modelcraft/1), atomic writes, autosave storage A stored ZIP of a manifest (format tag, geometry sources with SHA-256, part sizes and hashes), the model definition as stable pretty JSON, the mesh and geometry tags in a compact binary part, and the journal one command per line. Reading caps every size, checks every checksum and replays the model through its checked methods. Model::without_mesh and empty mesh fields left out of the model's JSON; geometry::read_file. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * engine: undo/redo on the journal, file.open/save/save_as, autosave and recovery CommandSpec gains a kind: Model commands are journalled and become undo steps; Session commands (file.*, edit.*) manage the session. Undo history is bounded by steps and estimated memory. Geometry sources are recorded with content hashes and reopened on file.open (missing or changed files are warnings). Desktop app autosaves every 30 s and reports recoverable models; Ctrl/Cmd+Z and Shift+Z/Y undo and redo. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * docs: the .modelcraft format, undo history, roadmap and parity status Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * simplify: shared path parameter, one load path for open/recover, history accounting in History Session commands skip the per-command model copy; saved revision is an Option; journal written from borrowed entries and read without an intermediate tree; backups copied by the file system; recovery lock and error helpers; geometry file wrappers use read_file. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm --------- Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com> Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
57b4b2f4d2 |
Model definition: sets by geometry name, materials, sections, couplings, BCs, loads, steps, check (#16)
* model: split nodes and elements into a mesh module (no behaviour change) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * model: sets by geometry name, materials and units, sections, couplings, BCs, loads, steps and the check Sets bind to persistent geometry names through the mesh's geometry tags (element, element face/edge and node classification) and resolve against the current mesh, so they survive a remesh. Steps list their active loads and boundary conditions explicitly. Model::check names every missing or bad item; Model::resolve gives the writers' view. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * engine: model definition commands (sets, materials, sections, RPs, couplings, BCs, loads, steps, tags, check) Each definition has create/edit/delete with its model JSON form as parameters; model.step.activate and model.activity drive the explicit step table; mesh.tag records where the mesh lies on the geometry; model.check and model.set.resolve report against the current mesh. Hostile params run against an empty and a fully defined session. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * docs: model definition in architecture and roadmap Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * model, engine: review cleanups Validated deserialization (a file replays through the checked methods), interned geometry tags by index, set resolution with tag bitsets and sorted vectors, one delete policy (a load or BC listed by a step is in use), shared helpers (context, remove_existing, step_mut, opt/req/name/listed), dead code removed, Resolved without a per-element section map. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * model: mesh-independent force distribution, tractions, stable reference point labels Force and moment on a set default to a total, split by consistent nodal weights over the set's faces (or equally over a node set); per_node is an explicit opt-in. Traction is force per area. resolve() expands them to nodal values for every writer and the solver. Reference points keep a stored node label taken from the top of the label range. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm --------- Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com> Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
02cc9dab57 |
Boundary surface preparation (weld, manifold/orientation, exact self-intersection, feature edges) and mesh.surface.check (#15)
* mesh: boundary surface preparation (weld, manifold and orientation checks, exact self-intersection, feature edges) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * engine: mesh.surface.check on an open design's body or an imported surface Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * engine: struct-init the test session Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * surface: weld at an absolute distance too; the engine welds CAD tessellations at twice SolidCraft's linear tolerance Faces of a SolidCraft tessellation carry their own copies of shared boundary points, which agree only to within the kernel's tolerance (up to ~2e-6 mm on the test corpus). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * docs: surface preparation in the literature survey, architecture and roadmap Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * surface: simplify after review - The weld distance travels with the mesh (SurfaceMesh::weld_distance, set by Shape::tessellate), so every consumer welds a tessellation correctly without opting in. - Exact tests are infallible on predicates::orient2d_projected (shared with generic_orient2d), and compute each vertex's plane side once per pair with an early reject. - One Box3 for the weld, the BVH and shells; a Half struct for edges; the weld's two lookups share one loop, with chained grid cells; cached normals for feature edges; shared parameter helpers. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * corpus: boundary surface preparation as a corpus stage 20 of 21 parts are valid boundaries with their expected genus; cross-cylinders' tessellation has cracks and flipped triangles where its two intersection curves meet. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm --------- Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com> Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
94dc50bb0c |
Exact 3D Delaunay tetrahedralization (Bowyer–Watson, ghost hull, BRIO/Hilbert, verifier) (#14)
* mesh: exact Bowyer-Watson Delaunay tetrahedralization with ghost tets, BRIO/Hilbert order and a verifier Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * mesh: Delaunay benchmark, hash-paired cavity faces, mesh.delaunay.points debug command Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * mesh: simplify Delaunay helpers, share predicates and parsers, halve verifier work Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm --------- Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com> Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
d8b3bb51e0 |
Element quality metrics and the certified validity gate (mesh.quality) (#12)
* mesh: element quality metrics and a certified Jacobian validity check Bernstein-form Jacobian determinants for tet4/tet10/wedge6/hex8/hex20, certified by bounds and subdivision (Johnen-Remacle-Geuzaine 2013); Shewchuk 2002 tet metrics, Knupp 2001 hex/wedge/quad metrics; quality report and the validity gate meshers run on their output. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * engine: mesh.quality command; model documents its node order mesh.quality reports certified validity, volume and per-metric statistics with fixed-range histograms. The model's ElementKind doc states the Abaqus/VTK node order and that deck code reorders formats like Nastran CHEXA20. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * quality: simplify after review; exact orient3d for tet4; gate on raw mesher arrays - tet4 validity from the exact orient3d of the input coordinates - validity_gate_elements takes (label, kind, coordinates) straight from a mesher - one Jacobian per solid; certify caches piece bounds; product weights precomputed - model::check_coordinates shared by set_node and quality; ElementKind is Ord - engine: shared labels() parameter parser Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm --------- Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com> Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
2c1821d0ad |
geometry: read tagged meshes through the VFS, refuse singular transforms, share the model's coordinate limit (#6)
read_3mf_file reads through solidcraft_io::vfs like open_design_file (regular files only, browser files too), so the engine drops its own capped reader and EngineError::File. A build item whose transform flattens its object is an error, and coordinates use modelcraft_model::MAX_COORD (1e9) instead of a looser limit of their own. Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com> Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
jyvikoandClaude Opus 5.5
|
f181c98b75 |
Face-tagged 3MF exchange: format spec, reader, geometry.import.mesh
docs/formats/tagged-mesh.md defines the exchange: 3MF Core with an optional ft:face attribute per triangle (and ft:faces per object) in a ModelCraft namespace. modelcraft_geometry::tagged_mesh::read_3mf reads it from bytes (wasm), capping every size and count and range-checking every index and coordinate. geometry.import.mesh adds the surfaces to the session, which keeps them beside the open design and restores them when a command fails. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm |
||
|
|
f36b1d9a69 |
Open .solidcraft designs: rebuild, persistent face names, geometry commands (#4)
* geometry: open .solidcraft designs, rebuild them and keep persistent face names open_design(bytes) reads a design (container or JSON) with solidcraft-io, rebuilds its timeline with solidcraft-doc and returns its bodies; each Shape carries SolidCraft's persistent face names by B-rep face index, so a face keeps its name through a parameter edit. sample::plate_design builds a parametric test plate in code. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * engine: geometry.open, geometry.bodies and geometry.tessellate The session holds the open design (shared, restored on a failed command, journalled when it changes). Hostile-params coverage includes non-files, missing files, oversized paths and extreme tolerances against an open design. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * docs: opening SolidCraft designs in the architecture and roadmap Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm * geometry: open_design_file reads through SolidCraft's bounded file access; simplify The engine's hand-rolled capped read is replaced by open_design_file, which uses solidcraft_io::vfs::read (refuses non-regular files before opening, works on the browser's in-memory files). Drops the duplicate size check, simplifies the sample sketch and the design-change test in Session::execute. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm --------- Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com> Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
jyvikoandClaude Opus 5.5
|
b64ec3f698 |
ModelCraft foundation: workspace, quality gates, FE model, command engine, geometry boundary
A pure-Rust CAE modeling workspace following the SolidCraft conventions: - modelcraft-model: nodes and elements by label with hostile-input validation - modelcraft-geometry: SolidCraft's kernel (pinned git dependency) behind our own API; tessellation into a face-tagged boundary surface for volume meshing - modelcraft-engine: CommandSpec registry, Session::execute with rollback and panic guard, scripts and a journal - modelcraft-cli: list commands, run scripts - xtask: layers (only geometry may use solidcraft-*), assets, licences, tests, wasm, ci - AGENTS.md, architecture, ADR 0001 (libraries and licences), roadmap, CI Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm |