The oracle binary (modelcraft-testkit) runs each case's recipe through the
command engine, measures its quantities by JSON pointers into step outputs
or commands, compares them with the cited references and the frozen
fixtures, and writes docs/oracle.md. 20 theory cases (patch tests of every
solid element, Timoshenko cantilevers, Lame, Kirsch, beam frequencies,
torsion and bending through couplings, explicit waves and impact, CDT
invariants), 8 published benchmarks (MacNeal-Harder patch, straight and
curved cantilevers, thick cylinder, Scordelis-Lo with solids, NAFEMS LE1,
LE10, FV32) and 10 pending cases with citations.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
A structured mesh of a six-sided block from its corners, with circular
and elliptical edges (Gordon-Hall transfinite interpolation), grading,
named faces, edges and vertices as geometry tags, and joining to the
existing mesh face to face (refused otherwise). solve.probe takes "at"
points and reports the nearest node with a result.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* Model, fem and decks: point masses, rotary inertia, springs, dashpots and rod3 trusses
Model: PointMass and Spring definitions (spring | dashpot; to ground or
two-point; along a degree of freedom, a vector or the line of the ends) on a
set or reference point, resolved per node; ElementKind::Rod3. fem: rod2/rod3
truss kernel on Basis::Line2/Line3 declaring ElementDofs (translations).
Decks: Abaqus T3D3, MASS, ROTARYI, SPRING1/2/A, DASHPOT1/2/A; Nastran CONM1,
CELAS2, CDAMP2; LS-DYNA ELEMENT_MASS/INERTIA and ELEMENT_DISCRETE; what a
format cannot take is reported. Commands model.mass.* and model.spring.*.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* Implicit solver: trusses, point masses, rotary inertia and springs on the DofLayout
Trusses declare their translations like solids; point masses, inertia and
springs ask the layout for the kinds they need at their nodes (translations,
rotations), and reference points they use get six degrees of freedom. The
matrix pattern takes rows for those points; dashpots are ignored with a
warning. Existing results are bit-identical (hash-checked).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* Explicit solver: trusses, point masses, springs and dashpots on the node-major layout
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* docs: fem.md on trusses and discrete elements in the layout; regenerate features.md
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* docs: trusses in plane models and corotational explicit trusses
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
---------
Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Survey of ~40 papers for meshing curved B-rep faces for shells: frontal-Delaunay point placement in
the cross-field metric (Remacle et al. 2013), recombination to all-quad, cleanup (Reberol et al.
2021), global parity by minimum T-join, verification on shell benchmarks; licences of every code
base. Also fixes the Lee & Lo 1994 author initials in literature.md B7.2.
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
- model: materials gain solver-neutral plastic (bilinear isotropic/kinematic,
hardening table, Johnson-Cook with adiabatic heating), damage (Johnson-Cook
D1-D5) and erosion (plastic strain); explicit steps gain nonlinear_geometry
(default on) and stress_rate (jaumann | green_naghdi).
- fem: rotation (Hughes-Winget, Flanagan-Taylor), plasticity (radial return,
capped bracketed Newton for Johnson-Cook, damage; the update takes the
mechanical strain increment so thermal strains can be subtracted), closed-form
hex8 gradients for deformed configurations.
- explicit: updated Lagrangian hex8/tet4, per-element material state, erosion
with reported energy, plastic work in the energy account.
- solver: warns that the linear solver uses the elastic constants of plastic
materials (results hash-identical).
- decks: Abaqus *PLASTIC (+ Johnson-Cook keywords), Nastran MATS1/TABLES1,
LS-DYNA *MAT_PLASTIC_KINEMATIC / *MAT_PIECEWISE_LINEAR_PLASTICITY; what a
format cannot express is reported as Unsupported.
- engine: model.material.plasticity, model.material.damage (catalogue ready),
explicit element probe, eroded elements in the solve summary.
Step commits before the rebase onto the DOF framework: branch explicit-x2-steps.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
Model: planar section kinds with Extent, element edges in sets, edge-weighted 2D loads,
centrifugal load, 2D model checks. fem: Plane kernels on Basis::{Tri3,Tri6,Quad4,Quad8}
declaring ElementDofs::new(DofSet::PLANE); QM6 incompatible modes with the
Wilson-Ibrahimbegovic correction. Solver: Kernel enum on the DofLayout; 3D results
bit-identical (hash-checked). Decks: Abaqus CPS/CPE/CAX, Nastran membranes and RFORCE,
LS-DYNA ELFORM 12/13. Mesh: free triangle mesher, planar region meshing, face boundaries.
Engine: mesh.planar with tagged edges. Analytic verification suite in solver/tests/plane.rs.
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Model: Newtonian fluid materials; fluid domains (box, spacing, conditions on
the box faces, obstacle bodies with conditions on their named faces, initial
velocity, body acceleration); fluid steps with caps. Deck writers refuse
fluid steps; a fluid-only model needs no mesh in model.check; one step
selector (Model::select_step) for every solver.
New L2 crate modelcraft-lbm: D3Q19 two-relaxation-time collision with Guo
forcing; halfway bounce-back walls (moving walls after Ladd), slip faces,
periodic pairs; Zou–He velocity and pressure faces with the D3Q19
transverse correction; obstacles voxelised from the face-tagged boundary
surface with exact predicates and symbolic perturbation; momentum-exchange
forces per box face and per B-rep face; unit conversion, automatic time step
and Mach/tau limits; bounded runs with frames and force histories.
Engine: model.fluid_domain.create/edit/delete, model.fluid_domain.boundary,
solve.fluid (obstacles from the open design or imported surfaces, lowerable
caps), solve.probe for fluid fields and wall force histories. Fluid Domain,
Inlet & Outlet and Lattice Boltzmann toolbar entries are ready.
Verification (analytic): plane Poiseuille exact with Λ = 3/16 and second
order (2.000) with Λ = 1/4; Couette exact with the wall shear; Taylor–Green
decay second order (2.01, 2.00); staircase pipe; Stokes drag of a sphere
array within 1.7% of Hasimoto at R = 6; Zou–He channel; mass conserved to
round-off; bit-for-bit reproducibility. Benchmark: Schäfer–Turek 2D-1.
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* fem: DofKind/DofLayout and the shape-function library with second derivatives
DofKind (Ux..Rz, T, P), DofSet, ElementDofs (per-node kinds and condensed
internal unknowns) and DofLayout: mesh nodes by label, kinds in order, then
reference points. basis::Basis covers line2/3, tri3/6, quad4/8/9, tet4/10,
wedge6/15, pyramid5, hex8/20/27 with values, first and second natural
derivatives (second-order forward AD, fem::jet) and the physical gradients,
Hessians and Laplacians with the map's second-derivative term. Tested for
Kronecker delta, partition of unity, polynomial completeness, finite
differences, affine and curved maps.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* solver, explicit: number degrees of freedom with DofLayout
The implicit mesh numbers its unknowns with a DofLayout (mesh nodes by label
with the kinds their elements declare, then six per coupled reference point);
assembly adds element blocks by (node, DofKind), so a node may carry any mix
of kinds; couplings, boundary conditions, loads and results address
(node, kind). The explicit system keeps node-major translations, now checked
against its layout (NODE_DOFS). Solid formulations declare their ElementDofs.
Every static, frequency and explicit result of the solver, explicit, engine
and io test suites hashes bit-identically before and after (957 results).
docs/fem.md describes the DOF model and the shape-function conventions.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* fem, solver: simplify after review
Block offsets resolved once per node pair; add_scalar/add_diagonal take
the kinds like add_block; one checked Jacobian inverse (dense::positive_inverse)
for the solid kernels and the basis library; static natural-node tables; the
Hessian path inverts the Jacobian once.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
---------
Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* ui.capture: the whole window drawn offscreen and rasterised on the CPU
ui.screenshot falls back to it when no frame is presented (hidden window,
locked screen), so agents can look at panels and the toolbar.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* Draw the open design and imported surfaces in the viewport
DisplayMesh keeps node labels on every element primitive (for results),
gains add_surface (geometry faces and their boundaries, coincident points
welded) and displaced (elements moved by nodal offsets). Bodies are
tessellated at a thousandth of their size; meshed models show the geometry
as boundaries only.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* results.* commands: deformed shape, contours, mode shapes, animation, reaction sums
The results display is session state (ResultsView), set by commands that are
not edits. Nodal fields (displacement, von Mises, principal and component
stresses; principal stresses in closed form after Smith 1961) and reaction
force and moment sums per set. Results kept from an earlier revision stay
viewable, marked stale; solve.probe says when a result is stale. The Results
tab's display and reaction entries are ready.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* Results display: deformed shape, contours with legend, mode shapes and animation, probe, reaction sums
The viewport draws the session's results view: elements moved by their nodes'
displacements or a mode shape (automatic or given scale), faces split exactly
along contour band boundaries into flat-coloured pieces (same on GPU and CPU),
a legend with levels and extremes, a results panel whose controls run the
results.* commands, a click probing the nearest node (solve.probe), and stale
results marked. Solving from the form shows the result on the Results tab.
sample::cantilever is a solvable model for tests and demos.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* Simplify the results display (review)
One Contour in the plot; the results scene reuses scene::build; a solve shows
its result through the engine (ResultsView::for_result) and the UI raises the
Results tab when a view appears; the plot's scale and contour values are kept
across animation frames; design bodies are tessellated once per design; the
first content is framed where the display is rebuilt; field_values in one
match; probe reuses results::displacements.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* Results display for explicit steps: field frames, energy histories
The results view works on the engine's step results (static, frequency,
explicit): ResultsView.frame and results.frame {frame | time} pick an explicit
field frame; the deformed shape (true scale) and contours (element stresses
averaged to the nodes, velocity) follow it; animation runs through the frames.
The Results panel has a frame slider and plots the kinetic, internal, hourglass
and external energies with their values at the frame. sample::impact is a
steel bar flying onto a rigid wall.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* docs/features.md after the rebase
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
---------
Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* docs: verification and validation against theory, experiments and published benchmarks; fixtures
Owner decision 2026-10-13: test against experimental and theoretical data; results published by
vendors (e.g. Abaqus benchmark and verification manuals) may be used as cited reference values for
our own models of the same problems; once a case matches, its result becomes a fixture so fidelity
cannot regress. Commercial products are still never run and their files and text never copied.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* docs: V&V policy in AGENTS.md, ADR 0001 and the roadmap
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
---------
Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* fem: wedge6 element (triangle × interval, 3 × 2 points), patch and cantilever tests
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* solver: reference points, kinematic and distributing couplings, moments by constraint elimination
Coupled reference points get six degrees of freedom; kinematic couplings are rigid
links, distributing couplings least-squares interpolation constraints. Every
constraint row and prescribed value is eliminated master-slave (Abel-Shephard
pivot choice), so the reduced matrix stays SPD; no coupling gives the old
elimination bit for bit. Verified: rigid motion of a coupled block, clamping
through a point, distributing tension vs pressure, bending and tube torsion.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* engine: reference point results in solve.static and solve.probe
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* docs: couplings, moments and wedge6 in the solver docs, literature and roadmap
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* solver: simplify constraint elimination and reference point plumbing
Rows combine by one sort; T_f transposed once; K and M reduced in one pass on a
shared pattern; prescribed motion computed once; reference point loads and BCs go
through Resolved like node ones (Mesh::label_dofs); one dof-direction rule;
StepResult::locate for probes; dead Csr::restrict removed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* solver: refuse oversized reductions before allocating them
A held distributing coupling point makes a dense (3N)^2 block; estimate it from
the constraint rows and refuse it against the factorization's memory budget
with a clear message, before anything is built. Other reductions with
dependents count their entries first (stopping at the budget) and reserve
fallibly.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
---------
Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Renumber the layer table for solver crates: fem at L1, solver at L2, fsi at L3
L0 model -> L1 geometry, mesh, fem, decks, render -> L2 solver (explicit, lbm later)
-> L3 fsi (later) -> L4 doc -> L5 io -> L6 engine -> L7 ui-egui, mcp -> apps.
UI_MIN_LAYER moves to 7, the testkit sits above it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* modelcraft-fem: element kernels for tet4, tet10, hex8 (full, incompatible modes), hex20 (full, reduced)
Shape functions, Gauss and conical-product quadrature, stiffness, consistent and HRZ-lumped
mass, body forces, consistent pressure loads on faces, integration-point stresses and their
least-squares extrapolation to nodes, isotropic and orthotropic elasticity. The element table is
one row per kind, so wedges, shells and beams are added locally.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* modelcraft-solver: linear static and frequency analysis with an analytic verification suite
Assembly from the resolved model on the node graph, boundary conditions by elimination,
consistent pressure, gravity and body-force loads, nested-dissection ordering, sparse up-looking
Cholesky with a factor-size cap, reactions, integration-point and nodal-averaged stresses, von
Mises; shift-invert block Lanczos with full reorthogonalization for natural modes, participation
and effective mass. ADR 0001 records the own-linear-algebra decision (determinism, wasm).
Verified against closed forms: displacement and traction patch tests for every element, cantilever
tip deflection (Timoshenko) with convergence rates, Lamé cylinder, Kirsch hole (Kt -> 3),
cantilever and free-free beam frequencies with six rigid-body modes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* Engine: solve.static, solve.frequency and solve.probe; results kept in the session
Results are stored per step, restored on a failed command and cleared when the model changes.
Caps (degrees of freedom, factor entries, Lanczos vectors) may only be lowered; hostile parameters
are tested against a solvable session.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* docs: implicit solver architecture, roadmap M4, parity and references
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* Simplify the solver: shared face integration, block assembly, cached extrapolation
- model: one face integrator (nodal::face_normal_weights) for tractions and pressures
- fem: mid-side tables from ElementKind::edges, orthotropic via inverse3, symmetric
accumulation without a symmetrize pass, incompatible-mode recovery without K_uu, model's
coordinate check, dead table rows removed
- solver: one pattern search per node pair (block, scalar and diagonal adds), extrapolation built
once per element type, reactions from the prescribed rows only, matrices dropped after
restriction, the free-body shift keyed on the factorization error, step selection in the solver,
Error::Element naming the element
- engine: the solver owns the default step and the shift check; the model comparison runs once
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* docs: results are stamped with the session revision
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
---------
Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* modelcraft-io: the .modelcraft file (modelcraft/1), atomic writes, autosave storage
A stored ZIP of a manifest (format tag, geometry sources with SHA-256,
part sizes and hashes), the model definition as stable pretty JSON, the
mesh and geometry tags in a compact binary part, and the journal one
command per line. Reading caps every size, checks every checksum and
replays the model through its checked methods. Model::without_mesh and
empty mesh fields left out of the model's JSON; geometry::read_file.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* engine: undo/redo on the journal, file.open/save/save_as, autosave and recovery
CommandSpec gains a kind: Model commands are journalled and become undo
steps; Session commands (file.*, edit.*) manage the session. Undo history
is bounded by steps and estimated memory. Geometry sources are recorded
with content hashes and reopened on file.open (missing or changed files
are warnings). Desktop app autosaves every 30 s and reports recoverable
models; Ctrl/Cmd+Z and Shift+Z/Y undo and redo.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* docs: the .modelcraft format, undo history, roadmap and parity status
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* simplify: shared path parameter, one load path for open/recover, history accounting in History
Session commands skip the per-command model copy; saved revision is an
Option; journal written from borrowed entries and read without an
intermediate tree; backups copied by the file system; recovery lock and
error helpers; geometry file wrappers use read_file.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
---------
Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* model: split nodes and elements into a mesh module (no behaviour change)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* model: sets by geometry name, materials and units, sections, couplings, BCs, loads, steps and the check
Sets bind to persistent geometry names through the mesh's geometry tags
(element, element face/edge and node classification) and resolve against
the current mesh, so they survive a remesh. Steps list their active loads
and boundary conditions explicitly. Model::check names every missing or
bad item; Model::resolve gives the writers' view.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* engine: model definition commands (sets, materials, sections, RPs, couplings, BCs, loads, steps, tags, check)
Each definition has create/edit/delete with its model JSON form as
parameters; model.step.activate and model.activity drive the explicit step
table; mesh.tag records where the mesh lies on the geometry; model.check
and model.set.resolve report against the current mesh. Hostile params run
against an empty and a fully defined session.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* docs: model definition in architecture and roadmap
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* model, engine: review cleanups
Validated deserialization (a file replays through the checked methods),
interned geometry tags by index, set resolution with tag bitsets and sorted
vectors, one delete policy (a load or BC listed by a step is in use),
shared helpers (context, remove_existing, step_mut, opt/req/name/listed),
dead code removed, Resolved without a per-element section map.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* model: mesh-independent force distribution, tractions, stable reference point labels
Force and moment on a set default to a total, split by consistent nodal
weights over the set's faces (or equally over a node set); per_node is an
explicit opt-in. Traction is force per area. resolve() expands them to
nodal values for every writer and the solver. Reference points keep a
stored node label taken from the top of the label range.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
---------
Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Owner decisions 2026-10-13: own solvers beyond linear (explicit dynamics with equations of state,
lattice Boltzmann CFD, fluid-structure interaction; blast fluids after), flow first; published
reference values allowed as a tagged benchmark suite beside the analytic gate; GPU backends
deterministic per device and checked against the bit-exact CPU path; layered crates (fem kernels,
solvers, fsi). ADR 0001 lists the GPL-family solver codes (Palabos, OpenFOAM, ...) and the
readable references.
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* mesh: boundary surface preparation (weld, manifold and orientation checks, exact self-intersection, feature edges)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* engine: mesh.surface.check on an open design's body or an imported surface
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* engine: struct-init the test session
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* surface: weld at an absolute distance too; the engine welds CAD tessellations at twice SolidCraft's linear tolerance
Faces of a SolidCraft tessellation carry their own copies of shared boundary points, which agree
only to within the kernel's tolerance (up to ~2e-6 mm on the test corpus).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* docs: surface preparation in the literature survey, architecture and roadmap
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* surface: simplify after review
- The weld distance travels with the mesh (SurfaceMesh::weld_distance, set by Shape::tessellate),
so every consumer welds a tessellation correctly without opting in.
- Exact tests are infallible on predicates::orient2d_projected (shared with generic_orient2d), and
compute each vertex's plane side once per pair with an early reject.
- One Box3 for the weld, the BVH and shells; a Half struct for edges; the weld's two lookups share
one loop, with chained grid cells; cached normals for feature edges; shared parameter helpers.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* corpus: boundary surface preparation as a corpus stage
20 of 21 parts are valid boundaries with their expected genus; cross-cylinders' tessellation has
cracks and flipped triangles where its two intersection curves meet.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
---------
Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
One end-to-end slice first (sets bound to SolidCraft names, materials, sections, BCs, loads,
steps, three deck writers, own solve) on tet meshes; then structured hex (sweep, mapped,
automatic decomposition) before octree all-hex; then contact, materials and explicit, and
post-processing. docs/parity.md lists capabilities by milestone, with the areas where we aim
to be better than Abaqus/CAE.
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* render: display data from the FE model, orbit camera and CPU rasterizer
modelcraft-render (L1, no GPU): DisplayMesh (the unshared faces of solid
elements, shells, element edges, line elements, nodes), the orbit camera
and a CPU rasterizer with PNG output for headless snapshots, adapted from
SolidCraft's render crate. Workspace: egui/eframe/egui-wgpu 0.36 and
SolidCraft's patched egui-wgpu from the pinned rev.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* engine: sample model script (a hex8 block and a tet4 cube)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* Desktop app: egui/wgpu viewport, model tree, commands, status bar, control channel
modelcraft-ui-egui (L5): ModelApp over the engine Session; GPU viewport
(lit faces, element edges, nodes) with a CPU fallback; orbit/pan/zoom,
standard views and fit; model tree; commands panel generated from the
registry with a JSON parameter form; status bar; control request
handling (engine.*, ui.*, ui.screenshot, ui.render). apps/modelcraft:
eframe window, --sample, --control PORT loopback JSON-lines server.
Adapted from SolidCraft's ui-egui and app.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* THIRD-PARTY-LICENSES: the desktop app's dependencies
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* docs: control protocol, desktop app in architecture, roadmap and attribution
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* render: simplify the display mesh (sorted face keys over maps, no unused fields)
Interior faces are found by sorting fixed-size face keys instead of a BTreeMap of Vecs, edges
are deduplicated by sort, and each element's corners are looked up once. Drops the unused
`element` fields on DisplayTri/DisplayLine, the unused Mat4::IDENTITY and corner_count, and
hoists the line colour out of the raster loop.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* viewport: split GPU geometry into batches within the buffer limit; refuse oversized CPU renders
A mesh with a few million boundary triangles made one vertex buffer larger than the device's
max_buffer_size (256 MiB under the limits eframe requests), and wgpu's default error handler
panicked. Geometry is now uploaded in batches of whole primitives, each at most 128 MiB and the
device limit, and all are drawn. A device error handler logs errors and shows them in the status
bar instead of panicking.
The CPU renderer refuses sizes over 8192 per side or 16 MP, and scenes over 20 million
primitives, with an error, and allocates its buffers fallibly. ui.render reports a size out of
range instead of clamping it; the CPU viewport fits a large window into the limit.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
---------
Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* mesh: element quality metrics and a certified Jacobian validity check
Bernstein-form Jacobian determinants for tet4/tet10/wedge6/hex8/hex20, certified
by bounds and subdivision (Johnen-Remacle-Geuzaine 2013); Shewchuk 2002 tet
metrics, Knupp 2001 hex/wedge/quad metrics; quality report and the validity
gate meshers run on their output.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* engine: mesh.quality command; model documents its node order
mesh.quality reports certified validity, volume and per-metric statistics with
fixed-range histograms. The model's ElementKind doc states the Abaqus/VTK node
order and that deck code reorders formats like Nastran CHEXA20.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* quality: simplify after review; exact orient3d for tet4; gate on raw mesher arrays
- tet4 validity from the exact orient3d of the input coordinates
- validity_gate_elements takes (label, kind, coordinates) straight from a mesher
- one Jacobian per solid; certify caches piece bounds; product weights precomputed
- model::check_coordinates shared by set_node and quality; ElementKind is Ord
- engine: shared labels() parameter parser
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
---------
Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
read_3mf_file reads through solidcraft_io::vfs like open_design_file (regular files only,
browser files too), so the engine drops its own capped reader and EngineError::File.
A build item whose transform flattens its object is an error, and coordinates use
modelcraft_model::MAX_COORD (1e9) instead of a looser limit of their own.
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
docs/formats/tagged-mesh.md defines the exchange: 3MF Core with an optional
ft:face attribute per triangle (and ft:faces per object) in a ModelCraft
namespace. modelcraft_geometry::tagged_mesh::read_3mf reads it from bytes
(wasm), capping every size and count and range-checking every index and
coordinate. geometry.import.mesh adds the surfaces to the session, which keeps
them beside the open design and restores them when a command fails.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* geometry: open .solidcraft designs, rebuild them and keep persistent face names
open_design(bytes) reads a design (container or JSON) with solidcraft-io, rebuilds its
timeline with solidcraft-doc and returns its bodies; each Shape carries SolidCraft's
persistent face names by B-rep face index, so a face keeps its name through a parameter
edit. sample::plate_design builds a parametric test plate in code.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* engine: geometry.open, geometry.bodies and geometry.tessellate
The session holds the open design (shared, restored on a failed command, journalled when
it changes). Hostile-params coverage includes non-files, missing files, oversized paths and
extreme tolerances against an open design.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* docs: opening SolidCraft designs in the architecture and roadmap
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* geometry: open_design_file reads through SolidCraft's bounded file access; simplify
The engine's hand-rolled capped read is replaced by open_design_file, which uses
solidcraft_io::vfs::read (refuses non-regular files before opening, works on the browser's
in-memory files). Drops the duplicate size check, simplifies the sample sketch and the
design-change test in Session::execute.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
---------
Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Owner decisions 2026-10-13: no public CAD datasets (Thingi10K included); test parts are
SolidCraft recipes and analytic shapes. Icons are VectorCraft artwork with the editable
source committed; cargo xtask assets now also requires .vectorcraft and .solidcraft files
to be attributed. AGENTS.md: GitHub CI runs the full gate, commit after each working step.
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Survey of about 75 papers on robust predicates, Delaunay tetrahedralization, boundary
recovery, quality improvement and hexahedral meshing, with verified DOIs and the
licence of every associated code base. Architecture and roadmap now name the chosen
methods (robust CDT after Diazzi et al. 2023; octree-dual all-hex first). ADR 0001
adds the licence findings and the test-geometry rule.
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A pure-Rust CAE modeling workspace following the SolidCraft conventions:
- modelcraft-model: nodes and elements by label with hostile-input validation
- modelcraft-geometry: SolidCraft's kernel (pinned git dependency) behind our own API;
tessellation into a face-tagged boundary surface for volume meshing
- modelcraft-engine: CommandSpec registry, Session::execute with rollback and panic guard,
scripts and a journal
- modelcraft-cli: list commands, run scripts
- xtask: layers (only geometry may use solidcraft-*), assets, licences, tests, wasm, ci
- AGENTS.md, architecture, ADR 0001 (libraries and licences), roadmap, CI
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
