buckle-euler-pinned and buckle-euler-cantilever (hex20 columns, −0.18 % from Euler with
Engesser's shear correction) and buckle-plate-square (a simply supported square plate, b/t =
100, −0.39 % from k = 4; the support and thickness choices in its README). ROADMAP and parity
updated, docs/oracle.md regenerated.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
Procedure::Buckle {modes, shift}: the step's loads as a linear preload, K_σ from its stresses,
and (K + λ K_σ) φ = 0 by block Lanczos in the K inner product: K⁻¹(−K_σ) on Cholesky without a
shift, the buckling transformation (K + σ K_σ)⁻¹ K on LDLᵀ with one, whose inertia counts the
load factors below σ (Grimes–Lewis–Simon 1994). Lanczos gains an operand and an eigenvalue map
(defaults keep frequency steps bit for bit) and reports converged negative eigenvalues. Results
are frequency results with a `buckling` part; modes display with their load factor.
solve.buckle (in the Static drop-down); Abaqus *BUCKLE, Nastran SOL 105 and LS-DYNA refuse it by
name. Euler columns of hex20 within 0.18 % of Engesser's load.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
CommandSpec::listing gives id, label, the parameter doc and the schema; MCP
list_commands, the control channel's engine.commands and the new
fieldcraft-cli commands --json use it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
Segment-to-segment penalty contact between element faces: each secondary
face and each main face facing it are projected onto the secondary face's
plane, split into triangles, clipped (Sutherland–Hodgman) and integrated
with a three-point rule per sub-triangle (Puso–Laursen segmentation, the
penalty at the integration points as Fischer–Wriggers), so a uniform
pressure gives the consistent nodal forces on both meshes and the contact
patch test passes on non-matching meshes. Every contact runs both ways at
half the penalty: pairs with each surface as the secondary, general and
self contact face against face. A bucket grid of face boxes every
increment, faces integrated in parallel and their forces added in face
order: the same numbers on any thread count.
The penalty per area ε = s γ min(m/A)/Δt² comes from the lumped masses,
each node's directional area and the stable increment, bounded by
Gershgorin's row sums so contact never shortens the increment. Coulomb
friction with exponential decay by a regularised return map at the
secondary nodes; rigid walls take Coulomb impulses. Contact work and
friction dissipation join the energy balance; each contact reports its
peak force, first and last contact, deepest penetration, friction and the
nodes adjusted at the start (initial penetrations adjusted strain-free or
refused with the node, face and depth); a cap on contact faces.
Verified (crates/explicit/tests/contact.rs, tests/oracle/explicit-*):
colliding bars (2L/c +1.2%, ρcAv₀/2, KE kept to 0.005%, contact energy
back to 8e-5 of it), blocks sliding to a stop on a rigid wall and on a
plate under constant and decaying friction (0.005–0.2%), the patch test
(σ_zz uniform to 0.06%), two spheres colliding against Hertz (peak +2.3%,
duration −0.4%; the oracle case waits for a graded sphere mesher), a free
body untouched by general contact, determinism across threads. Oracle
measures gain `over` (ratios). Existing fixtures do not move.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
Contact definitions on face sets: a pair (each surface's nodes against the
other's faces), general contact on a surface (self contact) or on every
exterior face of the solids; Coulomb friction with static and kinetic
coefficients and an exponential decay, a penalty scale and the choice to
adjust or refuse initially penetrating nodes, validated with caps. Rigid
walls of explicit steps gain friction. The check wants solid faces on
contact surfaces; sets used by a contact cannot be deleted.
fem::contact: the closest point of a triangle (Ericson) or a bilinear
quadrilateral (projected Newton) to a point, and a bucket grid of face
boxes for the global search, deterministic and bounded.
Commands interaction.contact.pair, .general, .edit, .delete and .find
(the touching parts of the mesh, with face sets and pairs made of them);
contacts in the model browser. Abaqus writes *SURFACE INTERACTION with
*FRICTION (exponential decay), *CONTACT PAIR and general *CONTACT; LS-DYNA
*CONTACT_AUTOMATIC_SURFACE_TO_SURFACE and _SINGLE_SURFACE with FS, FD, DC;
Nastran refuses contact by name. The implicit solver refuses contact by
name (M7); the explicit solver refuses it until the next commit.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
nl-hybrid-incompressible: 27 hybrid hex8 at ν = 0.4999 pulled to λ = 2 by a prescribed
displacement, against the compressible neo-Hookean closed form (1.4·10⁻⁹); its first
iterations need the LDLᵀ factorization. ROADMAP and parity updated, docs/oracle.md regenerated.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A tangent that is not positive definite is factored by LDLᵀ (Cholesky first, one symbolic
factorization) instead of cutting the increment back; each iteration records the tangent's
negative eigenvalues and the summary warns when a converged state keeps some. A model that can
move freely is still an error at its first tangent, located by the undeformed Cholesky factor;
a singular tangent later is a cutback. Nearly incompressible hybrid hex8, hex20 and tet10 at
ν = 0.4999 under prescribed displacement now converge to the closed form.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A supernodal LDLᵀ on the Cholesky factor's symbolic factorization (ordering, supernodes, fill,
cap and parallel subtree tasks shared through a Symbolic and a generic driver; the Cholesky
numerics are unchanged bit for bit). Pivots by the bounded Bunch–Kaufman (rook) search of
Ashcraft, Grimes & Lewis among each supernode's columns (Schenk & Gärtner's supernode
Bunch–Kaufman), 1 × 1 and 2 × 2, right-looking panels whose trailing update reuses the tiled
Cholesky kernels with L D formed on the fly. Reports the inertia; a column without a pivot above
round-off is a located Singular error; NaN is refused. Symmetric::new picks Cholesky, LDLᵀ, or
Cholesky with an LDLᵀ fallback; solve_refined adds iterative refinement. 1.1–1.2× the Cholesky
time on a 140 000-equation hex8 pattern.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
The desktop's ModelApp in a web page through eframe's web runner
(WebGPU, WebGL2 fallback, `?webgl` to force it), built with Trunk.
The browser services sit behind the UI's host-service seams: File >
Open uses the browser's file picker, dropped files are read
asynchronously, and both go into the page's files; Save, Save As and
Write Deck hand the written file out as a download. Autosaves go to the
recovery folder as on the desktop and are mirrored to local storage, so
File > Recover offers what a closed or crashed page left. `?sample=NAME`
opens a sample. A loading screen with the app icon, and a message
instead of the app when neither WebGPU nor WebGL2 is available.
`cargo xtask wasm` (and so `cargo xtask ci`) now checks fieldcraft-web
for wasm32 with the library crates. docs/web.md: running it locally,
what works in the browser and what does not.
Part of #119
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
The browser has no file system a page can call synchronously. On wasm32,
fieldcraft_io::fs now reads and writes files kept in memory (memory.rs,
after SolidCraft's vfs): the web host puts picked and dropped files in
and takes out what commands wrote. The recovery folder works over the
same calls (list, remove, is_file), with in-memory entry locks and a
host-provided clock on wasm, so autosave and File > Recover work in the
browser as on the desktop. Native behaviour is unchanged.
Part of #119
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
OK on a mesher's form ran the command on the window thread: octree hex
on the bolted assembly froze the window for over a minute, with no
progress and no way to stop it. The tet and hex meshers' forms now run
their command as a background job on a copy of the session, as opening
a file and solving do: the window keeps drawing with the job's name and
Cancel, the form closes when the mesh is in and shows the error when it
is not. ui.dialog {run} stays synchronous for programmatic callers.
The new test walks a first-time user's path: Open picks a SolidCraft
design, Tet Mesh opens its form, OK with the defaults meshes the part,
and a mapped hex mesh of a holed plate says why it does not fit.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
The Open dialog is a native picker the control channel cannot click, so
nothing could walk a person's open path end to end: ui.start file.open
opens the command's JSON form instead. ui.drop {paths} hands the paths
to the next frame with the window system's drops, which open them
through the same route a picked file takes (open_path: by type, in the
background, the unsaved-changes prompt, the recent list). At most 16
paths of at most 4096 bytes each.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
The bracket's tet mesh is not bit-identical across platforms (#115): its fillet peak is 213.31 MPa
on macOS and 212.42 on Linux CI, which turned the oracle job red after #110. Those two quantities
are no longer frozen; the page names them mesh-dependent instead of printing one platform's value.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
The end-to-end demo met a raw-CDT sliver that the validity gate accepted (exactly positive) and
the solver refused. Now:
- One validity criterion, `fieldcraft_model::admissible_jacobian` (normalized Jacobian above
1e-12), used by the implicit solver (fem `positive_inverse`), the explicit tet4/hex8
kinematics and the mesh gate, which proves it on the whole element (tet4: the solvers' own
Jacobian; curved kinds: a Bernstein floor), so whatever passes the gate passes the solvers.
- CDT rounding repaired by flips on the rounded mesh (Diazzi et al. 2023 §5.1) instead of the
±2-ulp nudge.
- `fieldcraft-mesh::tet`: a mutable tetrahedral complex whose every change is a checked
replacement (positive and admissible tetrahedra, faces matched with opposite orientation) with
an exact undo log; edge removal (Klincsek), multi-face removal, Delaunay insertion with
boundary faces, edge collapse; a curvature- and thickness-graded size field; constrained
Delaunay refinement with encroachment splits; ODT smoothing; the Klingner–Shewchuk schedule;
boundary vertices moved onto the exact B-rep surfaces at the end; tet10 with mid-edge nodes on
the geometry.
- `mesh.tet.generate` gains size, order, quality, quality_target, curvature_angle, grading,
max_passes, max_points and reports the CDT's and the mesh's quality; `solve.probe` takes a set
and reports its largest von Mises stress.
- Oracle cases filleted-bracket-fillet-stress(-coarse): the fillet's peak von Mises stress on
tet10 meshes of 2k and 13.5k elements, 213.3 MPa (a four-level study stays within 1.8%); the
CDT cases keep the raw tetrahedralization.
- Corpus quality columns: all 20 valid parts mesh and pass the gate.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
ui.select now also drives the viewport's selection: the filter, box
mode, items by name and label as model.set.create takes them, a pick at
a window point or the visible items in a box, changed by a mode
(replace, add, remove, toggle). ui.selection reads it back with its set
members and the hover; ui.dialog takes use_selection (the form's Target
row). Selection stays in the window: no engine command. Documented in
docs/control-protocol.md, with a test that picks the cantilever's free
end by a simulated click and a box, makes sets of it and resolves them,
and hostile-input tests (bad points and boxes, labels, huge lists).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
A push to the release branch (or workflow_dispatch) builds the macOS universal dmg and CLI zip,
the Linux tar.gz and AppImage and the Windows zip, with the version from Cargo.toml. The last
job checks the set, writes SHA256SUMS.txt and notes saying how the macOS app was signed, and
creates or updates a draft release; it never publishes. Off the release branch it only uploads
the files as a run artifact (dry run). macOS signing and notarization use the APPLE_* secrets
when they exist and fall back to ad-hoc signing (#72).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
The corpus runs mesh.hex.octree's mesher on every part at 1/25 of its diagonal (the size of
the structured hex column) and reports hexahedra, the smallest and mean scaled Jacobian, the
mesh volume against SolidCraft's and the time; a part it cannot mesh gets the reason. The
column caps the elements at 500 000 so a part whose grid explodes is refused in seconds.
Loaded parts carry their bounding-box diagonal for the stages. docs/meshing/corpus.md
regenerated: 15 of 21 parts mesh, including filleted-bracket, rounded-box, sphere-on-plate
and the analytic sphere.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
A slow theory case: the corpus bracket meshed by mesh.hex.octree at 7, 5 and 4 mm, clamped
at the base and loaded by 2 kN. Checks equilibrium, that every element is certified valid,
the mesh volume against the CAD volume, the beam bending stress of the upright leg
(sigma = M c / I = 145.3 MPa, within 5%) and the convergence of the fillet von Mises stress
against the 4 mm mesh.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
Replaces the mesh with the octree all-hex mesh of a body, an imported surface or every body
of the open design, and tags boundary element faces with their B-rep faces so sets by
geometry resolve. Size, tolerance, refinement depth, element cap, attempts and optimiser
sweeps are validated and capped; the element cap defaults to the session limit
(`Limits::max_hex_elements`), which the hostile-params test keeps small. Body input and face
tagging are shared with mesh.hex.generate. The catalogue's Automatic Hex entry is ready.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
`fieldcraft_mesh::octree::octree_hex_mesh` meshes any closed part with hex8 only:
- an adaptive 3-refinement grid (27-tree) with strong balance and closure, filled with
conforming node-marking transition templates (Schneiders; checked over all 48 symmetries);
- a core of grid cells kept clear of the boundary (the HybridOctree buffer rule), with
non-manifold cleanup and a genus check against the part;
- a feature graph from the B-rep (corners, curves, patches) and a partition-first map of the
core's boundary onto it, then two boundary layers: a padding layer and a pillow per patch,
so every face boundary and sharp edge is captured by element edges;
- a Garanzha-type untangling and fitting energy (shape term |J|^3/chi, a volume term and a
soft fitting term, deterministic across platforms), a compass search on the worst
elements and a certified repair; failures refine the grid near them and rebuild, within
bounded attempts and growth.
The output passes the certified Jacobian check of every element and a gate that the
boundary encloses the elements' volume; boundary quads carry their B-rep faces. Quality is
reported with the same scaled Jacobian as mesh.quality. Literature notes for each step are in
docs/meshing/literature.md (B1.6-B1.10).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
Five cases against closed forms: a Mooney-Rivlin block in Treloar's
uniaxial, equibiaxial and pure-shear modes and a Yeoh block in uniaxial
tension (the compressible energy's stresses, exact); a stretched
Mooney-Rivlin tube inflated by a follower pressure (Rivlin's incompressible
solution, 0.6 % at nu = 0.4995); free and fully held thermal expansion at a
thermal stretch of 1.2 (exact); a bar held at its ends heated past yield
(exact). docs/fem.md, the literature, ROADMAP (M15, M17), parity and the
oracle page follow.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
Four cases, each against its closed form: uniaxial tension of a J2 cube to a
logarithmic strain of 0.2 (Kirchhoff stress exact; 0.13 % from the explicit
solver's hypoelastic Cauchy stress, the elastic volume change between the two
laws), the Bauschinger effect of linear kinematic hardening on a load path
back to zero strain (exact), Hill's elastic-perfectly plastic thick cylinder
(bore displacement at a plastic radius of 1.5a within 0.009 %, collapse
pressure within 2e-8; the pending case is now active) and a cantilever's
plastic collapse, converged 3.1 % above beam theory's hinge, the bound a
continuum exceeds. docs/fem.md, the literature, ROADMAP (M15), parity and the
oracle page follow.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
filleted-bracket-blocks splits the bracket with SolidCraft's Split Body
into three slabs across its width, the fillet corner halved along its
diagonal and a four-cell O-grid round each hole; the corpus runner meshes
partitioned parts as one conforming block mesh. A heavy test clamps the
upright, loads the foot and checks hex8 and hex20 converge (hex20 tip
deflection within 0.1 % of a fine tet10 solution). Roadmap M5:
conforming interfaces done.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
Meshes the open design's bodies (or the listed ones) as the cells of one
conforming all-hex mesh with one size and tessellation tolerance for all;
elements carry their cell's body, boundary faces its B-rep faces. A cell
that is no block, or cells that touch without sharing whole faces, is an
error naming the bodies. Catalogue entry with its VectorCraft icon, the
MCP mesh tool's hex_blocks method, docs/features.md.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
hex_mesh_cells meshes cells that meet face to face (SolidCraft split
bodies) as one conforming all-hex mesh: each cell a mapped block after
smoothly meeting faces are joined (virtual topology: the halves of a hole,
a plane running into a fillet), vertices, edges and faces shared by
identity, interval assignment over all cells, each shared face meshed
once, radial edges graded off curved faces. finish spans several cells:
tags per cell, hex20 mid-edge nodes shared across cells, a closed
2-manifold boundary and no free internal face.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
Theory cases for the nonlinear solver, each frozen as a fixture: uniaxial
stretch of a neo-Hookean block to twice its length (closed form), the
nonlinear patch test on a distorted hex8 mesh, a quarter turn of the same
mesh (objectivity: zero stress), the elastica of a hex20 cantilever at
P L²/(E I) = 1, 2, 5, 10 against Bisshopp–Drucker (0.2–0.5 %), and the
inflation of a thick neo-Hookean tube by a follower pressure against
Rivlin's closed form (0.08 % at the bore). A finite-strain Cook's membrane
is pending its transcribed reference. docs/fem.md describes the
formulation, the material point interface, the follower-pressure choice and
what nonlinear steps refuse; the literature, parity and roadmap pages
follow.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
solve.nonlinear follows a nonlinear static step in load increments: dead
loads and prescribed displacements ramp with the load factor, a pressure
follows the deformed faces (its load stiffness symmetrised so the
supernodal Cholesky stays), the consistent tangent is refactored every
iteration with an optional line search, and an increment converges on
force, displacement and energy together. Increments start from the
extrapolated last one, grow after fast convergence and are cut back on
inversion, a non-finite or growing residual, an indefinite tangent or too
many iterations; the step stops cleanly at the minimum increment, the
increment cap or the Newton iteration limit. Elements are assembled in
parallel in label order (same bits on any thread count). Results carry
Cauchy stress, logarithmic strain, the increment history and a displacement
frame per increment, which results.frame and the results panel show.
Trusses, shells, beams, plane stress, incompatible modes, temperature and
centrifugal loads are refused by name; couplings warn that they stay
linear.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
The setup's symbols (fieldcraft_render::glyphs) are built with the display
data and drawn over the model in every style, at the drawn nodes (a results
plot's deformed shape), muted over results; the clipping radius holds them.
Theme tokens give their colours in light and dark. The browser's Loads & BCs
and Interactions rows get eye toggles (ui.set show_loads, show_interactions),
also in the view menu. The GPU viewport draws reference point names with the
interface's font; the bottom left says which definitions are sampled.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
view::scene draws the boundary conditions, loads and interactions as the
viewport does (muted over a results plot) and frames them; Shown.sampled and
the MCP picture info's sampled_symbols list definitions drawn with a sample.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
A command run by a script, the control channel, MCP, the command search
or the browser left the ribbon on whatever tab it showed, so an agent's
session never showed the stage it was at. `catalogue::stage_tab` is the
rule, from the catalogue: a command's entry tab, none for the Tools tab
(files, history, the model summary). The app follows it after a command
that changed the model or the results display (queries leave the ribbon
alone); a script follows its last command with a stage. A ribbon click
runs a command of the tab shown, so it never moves the ribbon: a test
checks every entry and drop-down command against its tab.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
The demo used the corpus I-beam, which is extruded along z and so stood
upright. A new corpus part, cantilever-i-beam, is the same section on the
YZ plane extruded along x, web upright: a sweep along a horizontal axis
for the meshers, and a cantilever that bends downward on screen. The
i-beam part is unchanged (its corpus row and the meshing tests keep it).
The demo clamps it at x = 0 and loads the free end with 1000 N in -z
through a kinematic coupling, and now checks the solution against beam
theory and stops when it is off: tip deflection (bending plus shear)
within 3 %, root bending stress (stress_xx along the top flange,
extrapolated to the root, nodes from the Abaqus deck) within 2 %.
docs/meshing/corpus.md regenerated with the new part.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
A factor of 0 was refused, so a picture sequence swinging the deformation
out from the undeformed shape had to start at a small factor or switch
`show` off. 0 is now a factor like any other (the view stays deformed), and
the results panel no longer works around the refusal. The MCP show_results
docs say so, beside `deformed: false`.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
`ui.view` and the MCP `screenshot` tool only turned to the named views, so
a picture sequence could only cut between them. `Orientation` (render) is a
camera orientation in degrees, {yaw, pitch, distance?}, checked as hostile
input: angles finite, distance finite and above 0, yaw wrapped, pitch
clamped to ±90, distance to 0.001–1e9. `modelcraft_engine::view::orientation`
parses it from JSON for both callers:
- control channel `ui.camera {yaw, pitch, distance?}` turns the app's camera;
- MCP `screenshot {camera}` turns it first (bridged through `ui.camera`,
headless in the CPU render, framed unless a distance is given). `view` and
`camera` are not given together.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
Crates fieldcraft-*, binaries fieldcraft and fieldcraft-cli, the .fieldcraft file (format tag
fieldcraft/1, manifest fieldcraft.json), FIELDCRAFT_* environment variables, the MCP server
name, egui widget ids (fc_*), the app icon document FieldCraft.icon and its generated family,
docs and licences. No compatibility shim: no files of the earlier name exist.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
Main's oracle job failed at 8cba3a7: scordelis-lo-roof-solid u_z moved from
-0.3014029226397275 (blessed before #50) beyond its 1e-9 band. The case is a
thin shell (R/t = 100) of one layer of hex20R solids, ill-conditioned, so
rounding alone moves u_z by about 1e-9 relative: on macOS #50's multithreaded
supernodal factorisation moved it by 8.2e-10 (to -0.3014029223929), #52's
interpolation order by a further 1.3e-10 (to -0.3014029223541), and Linux
CI by slightly more, past the band. #52 kept the lattice geometry the same.
The result itself is unchanged at the 1e-9 level (0.33% from the
reference).
A quantity may now set `fixture_relative` (with a required
`fixture_reason`) for a wider fixture band; Scordelis-Lo uses 1e-7 and is
re-blessed. Moved-fixture messages print full precision.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* mesh: one transfinite interpolation for mapped hex and mesh.block; stable oracle report
mesh.block's lattice is now built from the structured hex mesher's
transfinite code: faces by quad::transfinite_grid, the interior by the new
quad::transfinite_volume (Gordon-Thiel, blended by the block's graded
parameters), which hex::mapped now calls too. 2D patches are the
transfinite_grid of their sides. Edge curves return their corners exactly.
Oracle: a zero-reference quantity (rounding noise) keeps its absolute
tolerance as its fixture band, and docs/oracle.md shows such noise and
relative errors inside the fixture band as bounds, so the report no longer
changes with the order of floating-point operations (it failed the
'docs/oracle.md is current' check on main after #50). Scordelis-Lo moved by
1.4e-9 relative (an ill-conditioned thin shell of solids: sub-ulp node
changes) and is re-blessed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* simplify: shared face filling and lattice index; faces blended like the volume; exact ends for every edge
quad::transfinite_faces fills a block's six faces (with a per-face hook
that hex::mapped uses to project onto its B-rep faces) and
quad::lattice_index fixes the lattice layout for all three users.
transfinite_grid_blended blends faces by the block's graded parameters, so
faces and interior use one parametrisation and mesh.block reproduces its
earlier Gordon-Hall lattice (the Scordelis-Lo fixture is back to its
blessed value). Straight edges also return their corners exactly.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
---------
Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
