XY Plot opens a section in the results panel: a quantity picker, the
series from results.xy plotted against the step's own axis with the
frame or mode shown marked (a click shows the nearest), nodal fields
read at the probed node, and Export CSV through results.xy. The energy
plot and the XY plot share one line-plot function.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
geometry.check keeps its findings on the session (not an edit: not journalled,
saved or undone) while the checked design stays open; the picture and the app's
viewport draw the faces of small, sliver and near faces in the marker colour,
short edges as thick lines and a dot at each finding over everything. `mark:
false` or a clean check clears them.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
A Sides field kind: element faces or edges typed as element:side with
ranges (1-20:3, 25:1), no row cap, and Use selection for picked faces.
Set and mesh-tag forms use it instead of a JSON box (#449).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
Two field kinds: NameOr (a name as a bare string, or an object of fields)
and RefText (a text per item of a collection). The mirror's plane is a
datum plane or a point and normal; its images a body name per body
(#449).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
Four field kinds in the schema, each checked and described in JSON Schema: labels (nodes or
elements, typed as 1-5, 8 with Use selection taking the viewport's picks), points (rows of
x, y, z, added and removed), multi (checkboxes: coupling DOFs, step output) and number or
auto (the deformed scale). Node and element lists, probe and Delaunay points and block
corners use them; the remaining JSON fields hold geometry-specific shapes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
The context panel reads mesh.quality's reply as the counts (an area only for a surface mesh),
each metric's min, mean and max over its histogram (the bad end warm), and its worst element: a
click selects and frames it. Invalid and undetermined elements have a button that selects
and frames them.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
results.export.csv runs solve.probe or results.reactions and writes their reply as an RFC 4180
CSV: a row per node (node, x, y, z and the quantities the step has, columns it does not have
left out) or per set with the total and the applied load; numbers in shortest round-trip form,
so they read back bit for bit. A stale result is refused. The results panel has Export CSV…
beside Reaction sums and under the probed node: the save picker, or the form without one.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
results.contour takes range {min?, max?} (or "auto"), kept until the field changes: a
singular peak no longer squeezes the field into the bottom bands. Values above a clamped
maximum go to an extra band drawn in the over colour, split exactly at the clamp; the legend
shows that band up to the true maximum and says it is clamped. The results panel has Legend
max/min (Auto or a value), the MCP show_results tool a range argument, and headless pictures
follow the clamp too.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
diagnostics.crash_reports.delete deletes one report or all. The window lists each report
(when, what, how many times) with Report…, Copy Path and Delete, and Delete All; ui.prompt
answers it over the control channel.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
The README video's model as a sample: the corpus cantilever-i-beam design opened as geometry,
swept all-hex, clamped at F2:start, 1 kN on F2:top through a kinematic coupling; static step
Load. It has a Start-card thumbnail and a gallery capture; a test checks its tip deflection
against beam theory with shear.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
file.new replaces the session with an empty one: no design, mesh, definitions, results or
journal, nothing to save, the undo history empty. The File menu and Cmd/Ctrl+N run it, asking
first over unsaved changes. A sample name the app does not know (a typo, an old ?sample= link)
opens the samples to choose from, and the status names it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
One formatter (four significant digits, thousands separators, round-off as
0) and the model's units through every results readout:
- legend title with its unit, a mode shape normalised; Max/Min with units,
clickable to show and probe the node; markers at both in the viewport
(#321, #330)
- the deformation scale field shows the scale Deformed would use, never 0,
in the shared format; true scale named (#325, #326)
- setup symbols off over results by default (Show › Loads & BCs), and then
only the shown step's (#327)
- reaction sums in the results panel however they are run: per set and in
all, force and moment with units, applied beside reacted (#328)
- the probe: U [mm], |U|, Mises, stresses and principals with units, the
label kept inside the viewport, rows in the results panel (#329)
- hiding the mesh over a plot hides the element edges, not the contours
(#317); a hidden body's contours go with it, the range follows what is
shown (#365)
- the solve summary: peaks with units, n/a rows left out, counts grouped,
internals under Details (#321, #319)
- the energies plot: axes with units, a cursor at the frame (click or drag
to move it), hover to read (#331)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
- Select: Vertices picks the design's B-rep vertices (meshed or not), and
a selected vertex is marked (#346).
- Use selection on Datum Point (vertex, edge, face, or a hole's centre)
and Reference Point (geometry.centre: a hole's centre, a vertex, nodes)
(#346, #351).
- Partitioned Mesh: Use selection takes the picked bodies as cells; the
cell list has All, None and Invert; hovering a cell's row (or its method
row) highlights the cell in the viewport (#344).
- Rigid Wall's form takes its set from the selection; the Interactions
branch lists the explicit steps' rigid walls, each opening its step
(#350).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
- geometry.bodies lists each body's vertices; geometry.datum.point by
vertex takes the design's vertex names (labelled Vertex, not Mesh
vertex) (#346).
- geometry.centre: the point for what is picked: a vertex, nodes, a
hole's centre (cylindrical faces or circular edges), else a centroid
(#351).
- mesh.cells' form: the cells first, and a method drop-down per cell
(schema kind RefChoices) instead of JSON (#344).
- interaction.rigid_wall(.delete): rigid walls of an explicit step from
the Interactions tab, no longer coming soon (#350).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
Meshes that do not tag their element edges with the design's edge names
(tet, hex, blocks) left a selected edge with no highlight while the mesh
was shown. The edge is now marked along its own polyline, which the scene
already draws over the mesh.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
- A solve or a mesher runs as a job with one progress mechanism: the overlay
shows the step, stage, count and elapsed time with a bar when bounded, OK
waits while it runs, and the status sums it up (elements, smallest angle,
time) (#322, #357).
- Over the control channel such a command is a job too: answered when it
ends however long it runs, or at once with wait: false, then job.status,
job.wait, job.cancel; ui.inspect gives job; MCP waits for it (#367).
- A command that cannot run yet lists what it misses in the context panel,
each with a button to the command that provides it (#323).
- A cancelled or refused solve stays in its workspace (#324, test).
- A mesher form starts from the parameters of the mesh it would replace (#343).
- Seed Edges and edge/vertex/face datum points switch the selection filter
while open and restore it (#341).
- Datum forms draw the datum live, the Partition form shows its datum, and
new datums and partitions get the next free name (#347).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
The setup checklist marks the mesh Outdated (a warm ⚠ in the browser, with
what changed and where to remesh) when seeds, partitions or datum planes
changed after the last mesher ran, and model.check warns (#342). Replacing
a mesh asks with the element type change it makes, such as tet10 → tet4 (#343).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
solve.heat's reply and the results report give heat_flows: each convection,
flux and source load's heat into the body, the prescribed temperatures'
total and their sum; the results panel lists them for a heat step.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
A checkbox whose key is unset shows the field's default (#353). An empty JSON
field shows its format hint (#340). Vector components share a line only when
each fits a value such as -12000, else take a line each (#339). A space typed
in a definition name becomes _ and the form says why (#320).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
A non-zero prescribed displacement is an arrow leaving the nodes along the
motion (its held degrees of freedom stay supports); a prescribed temperature
is a thermometer, convection a wave off the faces, a heat flux an arrow onto
them. In the tree, thermal conditions carry the heat icon and a moving
boundary condition a motion arrow.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
