A Markdown table sizes its columns by the captions, so the pictures came out
at different sizes; an HTML table with a third of the width per cell keeps
them even. The crank-arm picture is scaled to 1400x860 like the others, and
flow-past (no picture yet) moves to the end.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
file.sample crank-arm: a 170 mm 6061-T6 crank built in SolidCraft
(crates/engine/samples/crank-arm.json), swept along z by mesh.hex.generate
as 7274 hex20 elements of 3 mm (scaled Jacobian min 0.17). The hex variant
drops the pocket floor fillet and boss chamfers, and its root arcs meet the
bosses 20 degrees off tangent so the arm's top face has no zero-angle cusp.
The square bore is fixed and 1500 N acts on the pedal hole; the faces are
picked by their surfaces, not their names. Its heavy test matches the root
bending stress to M/Z = 62.6 MPa within 3 % (0.3 % in practice).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
file.sample bracket-hex: the corpus bracket split into 30 SolidCraft cells,
meshed by mesh.hex.blocks as one conforming hex20 mesh of 3 mm, clamped at
the upright and loaded at the foot. The sample's script finds the clamp and
load faces in every cell that has them. Its test matches the tip deflection
of a fine tet10 solution within 1 % and checks the clamp carries the load.
Closes#166
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
file.sample heated-bracket: the corpus filleted bracket in steel, tet10, its
hole bores clamped, the upright's end held at 120 C and the rest cooled by
still air; one coupled temperature-displacement step. Its test checks the
temperatures against the heater and the air, then warms the bracket evenly,
clamps one hole, and matches the free thermal expansion alpha dT times the
distance from the hole along x.
Closes#165
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
file.sample rubber-seal: a gasket ring of hybrid hex8 elements in four
mapped quarter blocks, squeezed 2.5 mm between plates bonded to it
(nonlinear static, Mooney-Rivlin rubber). Its test frees the plates and
matches the closed form for incompressible uniaxial compression within 3 %,
and bounds the bonded ring's extra stiffness. The plates are prescribed
displacements until implicit contact (#161) can press it into a groove.
Closes#163
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
file.sample drop-test: an L-bracket standing on its foot (a SolidCraft script
in sample.rs) swept into hex8, falling 2 m onto a rigid floor tilted 15 deg;
explicit dynamics for 1 ms with gravity and plasticity. Its test checks the
mass against rho V, the impact speed sqrt(2 g h) and kinetic energy, the
energy balance and the momentum the floor takes. docs/examples.md starts
with it, and its picture is docs/media/examples/drop-test.png.
Closes#162
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
