Seed design edges by their persistent names with a count or a size, a bias
and a constraint; one undo step each, saved with the model. Seeds on edges a
reopened design lacks are reported as stale.
Part of #230.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
Datum planes by principal plane and offset, three points, or point and
normal; datum axes by principal axis, two points, or point and direction.
geometry.partition cuts the open design by a datum plane and keeps the
partition in the model, so geometry.open, file.open and undo cut the design
again. Requirements, forms and the Prepare entries are wired; features.md
lists them as ready.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
CommandSpec gains `requires: &[Requirement]` (crates/engine/src/requirement.rs): an open
design, geometry, nodes, a mesh, something to analyse, materials and sections for the
elements, sets, the definition an edit or delete acts on, a step, a result. Session::execute
checks them before running, so a command missing one fails at once with no partial work,
naming each missing piece and the toolbar entry that provides it ("Needs a material —
Properties › Material"). Requirements are real prerequisites (the model's own reference
checks and model.check's rules), never a workflow order. engine.commands / list_commands
list them.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
geometry.open with "model": "new" cleared the model but kept the session's
file path, so File > Save wrote the new model over the previous one. The path
and the revision saved there (which document the session is) were not part of
the undo state. A step now records the document when its command changed it:
the new model is untitled and unsaved; undo restores the old file and its
clean state, redo the untitled model (or the file it was saved to since).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
Opening a design over a model kept its mesh and every definition silently,
even when the design was another part (#145, #114). geometry.open now takes
`model`: "keep" (default: same-design reopen keeps the mesh and sets that
follow persistent face names) or "new" (clears mesh, definitions and
imported surfaces, keeps the unit system). The reply says whether the design
is `related` to the model's geometry references and lists `stale` mesh
bodies and sets. One undo step either way.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
cmd/forms.rs describes each command's parameters: model definitions (sets,
materials with elasticity, plasticity, hyperelasticity, damage, thermal and fluid
options, sections, reference points, couplings, masses, springs, boundary
conditions, loads, fluid domains, steps including nonlinear and explicit),
meshers, solvers, deck export, files and results. Tests check that every command
has a form and that a form's defaults are accepted or refused only for the
required fields left empty.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
Field, Kind, Dim and Collection describe a command's JSON parameters: numbers with
unit dimensions, choices, vectors, references to model items, groups, one-of
variants and rows. prefill, switch_variant and problems serve forms; json_schema
gives the same as JSON Schema. No command is described yet (form: None).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
file.open, geometry.open, geometry.import.mesh and reopening a model's
geometry read through the io crate's file edge instead of SolidCraft's
vfs, so in the browser they see the files the page holds (the same
store saves write to). Natively it is the same capped regular-file read.
fieldcraft-geometry drops its path-based readers (read_file,
open_design_file, read_3mf_file): it works on bytes, and reading files
is the io crate's job.
Part of #119
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
Crates fieldcraft-*, binaries fieldcraft and fieldcraft-cli, the .fieldcraft file (format tag
fieldcraft/1, manifest fieldcraft.json), FIELDCRAFT_* environment variables, the MCP server
name, egui widget ids (fc_*), the app icon document FieldCraft.icon and its generated family,
docs and licences. No compatibility shim: no files of the earlier name exist.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* modelcraft-io: the .modelcraft file (modelcraft/1), atomic writes, autosave storage
A stored ZIP of a manifest (format tag, geometry sources with SHA-256,
part sizes and hashes), the model definition as stable pretty JSON, the
mesh and geometry tags in a compact binary part, and the journal one
command per line. Reading caps every size, checks every checksum and
replays the model through its checked methods. Model::without_mesh and
empty mesh fields left out of the model's JSON; geometry::read_file.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* engine: undo/redo on the journal, file.open/save/save_as, autosave and recovery
CommandSpec gains a kind: Model commands are journalled and become undo
steps; Session commands (file.*, edit.*) manage the session. Undo history
is bounded by steps and estimated memory. Geometry sources are recorded
with content hashes and reopened on file.open (missing or changed files
are warnings). Desktop app autosaves every 30 s and reports recoverable
models; Ctrl/Cmd+Z and Shift+Z/Y undo and redo.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* docs: the .modelcraft format, undo history, roadmap and parity status
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* simplify: shared path parameter, one load path for open/recover, history accounting in History
Session commands skip the per-command model copy; saved revision is an
Option; journal written from borrowed entries and read without an
intermediate tree; backups copied by the file system; recovery lock and
error helpers; geometry file wrappers use read_file.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
---------
Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* mesh: boundary surface preparation (weld, manifold and orientation checks, exact self-intersection, feature edges)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* engine: mesh.surface.check on an open design's body or an imported surface
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* engine: struct-init the test session
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* surface: weld at an absolute distance too; the engine welds CAD tessellations at twice SolidCraft's linear tolerance
Faces of a SolidCraft tessellation carry their own copies of shared boundary points, which agree
only to within the kernel's tolerance (up to ~2e-6 mm on the test corpus).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* docs: surface preparation in the literature survey, architecture and roadmap
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* surface: simplify after review
- The weld distance travels with the mesh (SurfaceMesh::weld_distance, set by Shape::tessellate),
so every consumer welds a tessellation correctly without opting in.
- Exact tests are infallible on predicates::orient2d_projected (shared with generic_orient2d), and
compute each vertex's plane side once per pair with an early reject.
- One Box3 for the weld, the BVH and shells; a Half struct for edges; the weld's two lookups share
one loop, with chained grid cells; cached normals for feature edges; shared parameter helpers.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* corpus: boundary surface preparation as a corpus stage
20 of 21 parts are valid boundaries with their expected genus; cross-cylinders' tessellation has
cracks and flipped triangles where its two intersection curves meet.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
---------
Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
read_3mf_file reads through solidcraft_io::vfs like open_design_file (regular files only,
browser files too), so the engine drops its own capped reader and EngineError::File.
A build item whose transform flattens its object is an error, and coordinates use
modelcraft_model::MAX_COORD (1e9) instead of a looser limit of their own.
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
docs/formats/tagged-mesh.md defines the exchange: 3MF Core with an optional
ft:face attribute per triangle (and ft:faces per object) in a ModelCraft
namespace. modelcraft_geometry::tagged_mesh::read_3mf reads it from bytes
(wasm), capping every size and count and range-checking every index and
coordinate. geometry.import.mesh adds the surfaces to the session, which keeps
them beside the open design and restores them when a command fails.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* geometry: open .solidcraft designs, rebuild them and keep persistent face names
open_design(bytes) reads a design (container or JSON) with solidcraft-io, rebuilds its
timeline with solidcraft-doc and returns its bodies; each Shape carries SolidCraft's
persistent face names by B-rep face index, so a face keeps its name through a parameter
edit. sample::plate_design builds a parametric test plate in code.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* engine: geometry.open, geometry.bodies and geometry.tessellate
The session holds the open design (shared, restored on a failed command, journalled when
it changes). Hostile-params coverage includes non-files, missing files, oversized paths and
extreme tolerances against an open design.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* docs: opening SolidCraft designs in the architecture and roadmap
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* geometry: open_design_file reads through SolidCraft's bounded file access; simplify
The engine's hand-rolled capped read is replaced by open_design_file, which uses
solidcraft_io::vfs::read (refuses non-regular files before opening, works on the browser's
in-memory files). Drops the duplicate size check, simplifies the sample sketch and the
design-change test in Session::execute.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
---------
Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
