- A solve or a mesher runs as a job with one progress mechanism: the overlay
shows the step, stage, count and elapsed time with a bar when bounded, OK
waits while it runs, and the status sums it up (elements, smallest angle,
time) (#322, #357).
- Over the control channel such a command is a job too: answered when it
ends however long it runs, or at once with wait: false, then job.status,
job.wait, job.cancel; ui.inspect gives job; MCP waits for it (#367).
- A command that cannot run yet lists what it misses in the context panel,
each with a button to the command that provides it (#323).
- A cancelled or refused solve stays in its workspace (#324, test).
- A mesher form starts from the parameters of the mesh it would replace (#343).
- Seed Edges and edge/vertex/face datum points switch the selection filter
while open and restore it (#341).
- Datum forms draw the datum live, the Partition form shows its datum, and
new datums and partitions get the next free name (#347).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
The setup checklist marks the mesh Outdated (a warm ⚠ in the browser, with
what changed and where to remesh) when seeds, partitions or datum planes
changed after the last mesher ran, and model.check warns (#342). Replacing
a mesh asks with the element type change it makes, such as tet10 → tet4 (#343).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
solve.heat's reply and the results report give heat_flows: each convection,
flux and source load's heat into the body, the prescribed temperatures'
total and their sum; the results panel lists them for a heat step.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
fieldcraft_model::progress: a host installs a Progress on the worker thread
and reads its snapshot from another; the engine names the step being solved,
the nonlinear solver its load factor, the explicit solver its time, the
fluid solver its steps, transient heat its increments and the tet mesher its
stage and pass. Without one installed every report is a no-op (#322, #357).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
A checkbox whose key is unset shows the field's default (#353). An empty JSON
field shows its format hint (#340). Vector components share a line only when
each fits a value such as -12000, else take a line each (#339). A space typed
in a definition name becomes _ and the form says why (#320).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
Every command with a schema now refuses a top-level key it does not take,
naming the key and the accepted ones (#316). A bad definition name's error
suggests the nearest valid one (#320). The load and material params docs list
the heat loads and the thermal block.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
A non-zero prescribed displacement is an arrow leaving the nodes along the
motion (its held degrees of freedom stay supports); a prescribed temperature
is a thermometer, convection a wave off the faces, a heat flux an arrow onto
them. In the tree, thermal conditions carry the heat icon and a moving
boundary condition a motion arrow.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
- describe.rs: a definition's fields in its form's labels and units (sets by
members and what they resolve to), for the context panel.
- reply::done: status lines that say what changed ("Showing Load deformed",
"Mode 2: 1637 Hz", "Added material Al").
- The context panel puts the form and the selection above reports; opening
another document clears both; what a form makes is selected.
- Use selection reuses a set with the same members, otherwise names one made
on OK; Cancel leaves the model unchanged. The Target's set row is labelled.
- The browser's state marks sit in one column at its left edge; a right click
selects the row its menu acts on.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
Ties constrain temperatures with the displacement tie's mortar weights in
steady and transient heat and in coupled temperature-displacement steps; the
heat solver eliminates them with the prescribed temperatures through
constraints::Reduction. refuse_ties is gone.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
Delaunay refinement split a boundary face edge at its midpoint even when that
midpoint lay inside the diametral sphere of a feature edge beside it. Each such
split halves the face vertices' distance to the curve, so they piled up against
it (the heated bracket grew face vertices 0.016 mm from a 4 mm-sized edge), the
improvement schedule could not lift the tetrahedra there to its target, and
inserted vertex after vertex around them: 29257 elements and about two minutes
to open instead of 23641 and 6 s. The SolidCraft pin move (4c91f9b) added one
interior vertex to the bracket's end faces, which changed the CDT enough to
expose it.
Following Shewchuk (1998), an encroaching midpoint now splits the encroached
feature edge instead.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
examples.md and mcp.md tell the one-datum workflow and its numbers; the
crank gallery captures and Start card thumbnails are taken again on this
build; ROADMAP marks the automatic blocks of extruded cross-sections done,
and features.md's Decompose entry says what is left (3D parts).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
crank-arm and crank-mirror now take one datum (Sym) and its partition:
mesh.hex.generate extrudes the half CrankArm/a, cutting its cross-section
into blocks itself, with no seeds, and mesh.mirror reflects it. 8 664
hex20, scaled Jacobian min 0.371; root sigma_xx -62.44/+62.44 MPa against
M/Z 62.6 (0.25 %), spindle reaction 1500 N. The seven partitions and
eleven exact seeds go.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
Every half hour the page fetches its own address past the browser's cache; when it loads
another content-hashed build of the app than the running one, the status bar offers "Reload
to update" (the page's unsaved-changes question still guards the reload). Rust only, no
service worker: the browser build has no other update path and none of the desktop's
download code.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
The window checks at start-up at most once a day when automatic checks are on (Settings and
the first run's question), never while that question is open and never without a host, so the
browser and tests make no network call. A newer release shows a quiet notice in the status bar
("FieldCraft X is available — What's new · Install · Skip"); Install downloads and verifies
through the host, then asks to restart, saving or asking about unsaved changes first, and the
host swaps the release in after the window closes. A .deb/.rpm install offers the system's
installer and the command instead. Skip this version is kept in the preferences.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
The same check as the app's Help › Check for Updates and fieldcraft-cli update --check: the
latest release, whether it is newer, its page, whether it is signed and the asset this install
would download. It only reports. Checking reaches the network, so only the desktop app and the
CLI switch it on; tests, scratch sessions and the browser build refuse without asking.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
Versions ordered as SemVer, the GitHub Releases API reply read as hostile input, how this
copy is installed (macOS app or CLI, Windows folder, AppImage, tar.gz folder, .deb/.rpm) and
which release asset updates it, the checksum list's minisign signature checked against the
built-in release key, the asset's SHA-256 checked against the list, archives unpacked inside
the staging folder, and the swap planned and applied by renames with undo on failure. The
network and unpacking parts are native only; a mock release server drives the tests.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
The extrusion's automatic cross-section blocks reach both commands; the
half crank arm, cut only on its symmetry plane, meshes all-structured
(sJ >= 0.37) with no seeds either way, and mesh.hex.generate's
description says so.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
A region of an extrusion's (or revolution's) cross-section that no
structured scheme fits is now cut by straight lines into blocks that fit,
before interval assignment, so the cuts are curves of the arrangement and
their counts are assigned with the rest; nothing reaches the model
(hex::decompose, after Tam and Armstrong's medial-axis subdivision and Li,
Armstrong and McKeag's primitives).
Per region: several holes are separated by lines across the gaps between
neighbouring holes; a piece with one hole gets the O-grid layout whose
pieces score best (lines from the outer corners towards the hole or along
their bisectors, from the hole's corners, or along four directions from
the hole); pieces without holes are cut by a two-ply search over lines
from concave corners and fillets and from convex corners. Candidates are
scored by meshing the pieces with their schemes (smallest corner scaled
Jacobian). A region's blocks are kept when fair (at least 0.5) or no worse
than its free mesh, and cuts never end inside a seeded curve.
This replaces the cuts from reflex corners along an edge. Tests on an L,
a T, a plate with a hole, with a slot and with three holes, and the half
crank's cross-section: every region structured, the quads conforming and
the smallest corner scaled Jacobian bounded. The half crank arm now
extrudes in 12 structured regions with a hex20 minimum scaled Jacobian of
0.37 (the arm meeting the bosses 20 degrees off tangent bounds it) where
it had 2 free regions and 0.009.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
The schemes, interval constraints, curve nodes and region meshes of a
multi-level sweep's cross-section move out of layered::mesh into
hex::section, with the curve placement (seeds, projection onto walls)
passed in, so the cross-section can be meshed on its own.
region::mesh_structured gives a scheme's mesh or None where it would fold,
without falling back to the free mesher. No change in behaviour.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
The first run asks whether to share anonymous usage (only when the host
says this run may), the answer and a random install id are kept in the
preferences, and Help › Settings… changes it. Commands are counted by
where they came from (ui, palette, script; mcp when the MCP server says
so), and cancelled forms and clicks on commands that cannot run yet are
recorded. The preferences go through a PrefsStore (a file, or the
browser's storage). Control channel: ui.settings, ui.prompt answers.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
fieldcraft_engine::usage holds the events docs/privacy.md lists, typed so
that only registry names (command ids, sample names, requirements) and
durations can go in them, a bounded queue that records nothing until the
host enables it, and the PostHog batch body. Session::execute counts each
top-level command of a session with an origin (ui, palette, script, mcp):
its id, kind, duration and error class, and the funnel's milestones and
opened samples. Nothing here touches the network.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
All six docs/media/examples images at 1400 x 860 in the light theme, the
solved sample in the home view (the crank mirror from below, as its text
says), with the wireframe symbols, no SETUP card and the crank's planes
hidden; the Start card thumbnails cropped to the model from them.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
geometry.partition hides the plane it cuts by (view state, saved with the
model): the cut shows as edges on the cells. The eye or selecting it in
the browser shows it again. The crank samples so open without their
planes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
A datum plane is drawn as the model's extent within it (where it cuts the
model's box, in the plane's axes) plus a 5 % margin, a datum axis along the
model's extent plus the margin, instead of squares 1.2 diagonals wide.
Fit, Home, the standard views and headless pictures frame the model
without the datums (they stay inside the clipping radius). The datum
selected in the browser is drawn highlighted and on top, even when hidden.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
The desktop app installs the crash reporter and a log file at start
(both in a temporary folder in --control and CI runs, #266), journals
the window's commands (background jobs included) and every control
request's method, and ends the journal on a clean exit. A start after a
crash asks: "FieldCraft closed unexpectedly", Report It… or Not Now.
Help › Report a Bug (also Tools › Help and ui.start
diagnostics.bug_report) shows exactly what the GitHub bug form will be
filled with: the version, the OS, the last error, and for a crash where
it happened. Share my session adds the replayable commands, Include the
model file the model. Open GitHub Issue opens the form in the browser
through the system's opener; files to attach are saved to
bug-reports/<time>/ and a long session goes on the clipboard. Nothing is
sent without that click and the user's submit on GitHub.
The control channel answers the new prompts (crashed: report, close;
report_bug: set, close) and ui.inspect shows the draft; it never opens
the browser.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
crash: a panic hook and a locked per-run command journal (adapted from
SolidCraft's crash reports). A panic in a command becomes a report with
the model from before it and the command; one outside commands, or an
unclean exit found at the next start (abort, segfault, a crash in a
graphics driver, a kill: what #248 needs), a report with the model the
journal starts from (autosave, file or a copy) and the commands since,
the last control request and the dead run's log lines. Reports are
bounded, deduplicated by signature and replayable (crash::replay, with
writes confined to a scratch folder). The crash folder follows the
automation temp area in --control and CI runs.
logfile: a small size-rotated file logger behind the log facade.
bug_report: GitHub bug-form drafts. Version, OS and what happened by
default, home folder shown as ~; the command journal only with Share my
session, the model only with Include the model as well; a session too
long for the link becomes a file to attach and the clipboard text.
Commands: diagnostics.crash_reports, diagnostics.crash_report,
diagnostics.bug_report (Tools › Help, with its icon) and
diagnostics.crash_test (FIELDCRAFT_CRASH_TEST=1 only).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
recovery::data_dir() names the per-user data folder (the temporary
fieldcraft-automation folder in automated runs) that the recovery, crash
and log folders live in. Roots::writes_within lets reads go anywhere
while writes stay in one folder, for replaying a crash report safely.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
The Start card and File › Samples show a grid of sample cards (thumbnail, name,
one-line description, the full text on hover) in a scroll area with a solid
scrollbar; Help › Samples keeps rows in the same order. The card stays clear of
the view cube and the navigation bar.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
Right-click on any browser item (body, surface, datum, partition, set,
material, section, step, boundary condition, load, reference point,
coupling, contact, fluid domain) opens its menu: Edit…, Hide/Show,
Isolate, Show All, Active in step (boundary conditions and loads) and
Delete…. A right click on a datum or a partition's cut face in the
viewport opens the same menu. Each item the viewport draws on its own
has an eye; hidden items are neither drawn nor picked. Datums and
partitions are selectable with properties. Delete… and the Delete key
ask first (the prompt lists what uses the item: a datum's partitions
are deleted with it, other definitions in use are refused); ui.prompt
answers it. Every entry runs the same command as the ribbon and forms.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
view.hide, view.show, view.isolate and view.show_all change which
bodies, surfaces, datums, boundary conditions, loads, reference points
and couplings the viewport draws. The hidden items are view state: the
manifest's `view` keeps them, a change marks the model unsaved, but it
is neither journalled nor undone and leaves results current. Items that
go away are forgotten. Headless pictures leave hidden items out; the
glyph builders take a filter. Tools > View > Show All claims the
commands.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
A datum point by coordinates, at a mesh vertex, a fraction along a
design edge, at a face's centre, or where a datum axis crosses a datum
plane. Datum planes take three datum points or a normal to a datum axis;
axes take two datum points. geometry.datum.edit, .axis.edit and
.point.edit redefine a datum of their kind (partitions cut again);
geometry.datum.delete with cascade also deletes the partitions that cut
by it. The ribbon shows Datum Plane, Datum Axis, Datum Point and
Partition, each with its own icon; edit and delete leave the ribbon
(still commands, claimed by their entries).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
Datum::Point joins planes and axes (checked like them, refused by
partitions with the kind named). The users each remove_* refuses with
(sets, materials, boundary conditions, loads, reference points, fluid
domains, datums) are public functions, so a caller can list them before
deleting.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
crank-arm (and crank-mirror, kept as the same model under the name of
its mirror workflow) now cut the crank on its symmetry plane and the
half into seven cells: across the arm at x = 30, 60, 110 and 148, and on
two diagonals radial to the pocket's corner fillets. Every cell's
cross-section maps (four-sided blocks, the half O-grids round the bores,
triangle primitives at the pocket's corners); exact edge seeds give each
cut the same divisions on both sides, so mesh.cells merges all six cuts
and mesh.mirror reflects the half: 7 710 hex20, scaled Jacobian min 0.37
(was 0.17, and 0.009 for the swept mirrored half), edge ratio at most
7.0. Root σxx ±62.43 MPa against M/Z 62.6 MPa, the spindle carries the
1500 N. The test asserts the quality floor. Gallery images regenerated.
Fixes#247
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
A cross-section region with three corners (a fillet's quarter disk, a
pocket corner cut off by a partition) was left to the free all-quad
mesher. It now gets midpoint subdivision's triangle primitive (Tam and
Armstrong 1991; Li, Armstrong, McKeag 1997): lines from a centre to a
node on each side split it into three mapped blocks, the interior then
smoothed and every quadrilateral checked (a fold falls back to free).
Interval assignment gains dominance constraints (a side shorter than
the other two together) so the split always exists.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
Boundary condition, load and interaction symbols are wireframes (thin lines,
no shaded cones), so they never hide the mesh or a contour plot:
- a crossed wire triangle per constrained translation, tip on the node,
coming from outside the part where the set's faces say which side that is;
a held rotation adds a smaller triangle behind it (the double mark); fixed
shows all three axes, a symmetry plane only its normal;
- forces as open-headed arrows ending on the node, as long as four support
units at one place and 2.5 over a set, so loads and supports stay in
proportion (#78); moments as an axis line and a right-handed curved arrow
(#79); contact and tie surfaces as small squares on their faces;
- a constant size on screen at any zoom (#80): the symbol unit is the size
setting (View > Symbol size, `ui.set {symbol_size}`, 14 pt by default)
times the model length a pixel spans, rounded to a quarter of a doubling;
- spread evenly on a grid a few symbol units across, so their density follows
the screen, never more than 400 per definition;
- a layer of their own on the desktop (GPU and CPU): zooming rebuilds and
uploads the symbols only, never the mesh's scene; framing leaves them out;
- colour per kind from the theme's tokens (a new contact colour), and the
definition selected in the browser drawn in the selection colour, wider;
- depth-tested against the model with the line bias that keeps them on their
own surface; a load at a reference point or a single node and a reference
point's cross are drawn over the part (#78).
Headless pictures (MCP screenshot, `ui.render`) frame the camera first and
draw the symbols at the default size for it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
A scene's `on_top` lines are drawn after every depth-tested layer, over the
model, so a concentrated load at a point inside the part can be seen from any
side (#78). `render_layers` takes a list of overlays (the setup's symbols and
the selection highlight become separate layers), and draws every layer's
labels. `Camera::length_per_pixel` is the model length a pixel spans at the
target: the scale symbols of a fixed screen size are drawn at.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
An orbit turns about the model point under the press (the pick ray's
first hit on the plot, the mesh or the design), or the centre of what is
drawn when it starts on empty space, keeps that point still on screen and
marks it while orbiting. The wheel and a pinch zoom toward the point
under the cursor; the wheel's delta is read as it arrives, so a notch
zooms in full in orthographic and perspective views alike (#273).
Mouse presets and reverse zoom come from SolidCraft (prefs.rs NavPreset,
NAV_PRESETS; MIT OR Apache-2.0): FieldCraft's own (left drag per the
navigation bar) stays the default, Ctrl + left drag from empty space
orbits in every preset. They are chosen in the display menu, settable
with ui.set and kept in prefs.json beside recent.json (the browser build
keeps them for the page's run); an older prefs.json still loads.
Fixes#262, fixes#273.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
