NonlinearStatic.arc_length {constraint, max_load_factor, displacement_limit}: Riks–Crisfield
arc-length increments (cylindrical or spherical arc, tangent predictor signed by the angle
criterion, the constraint's quadratic root chosen by the angle with the last iterate), arcs
grown, shrunk and cut back as increments are. The converged state's tangent is factored for the
next predictor (LDLᵀ when indefinite); its negative eigenvalues are recorded per increment and
changes in their count are reported as limit or bifurcation points. Ends at the maximum load
factor, a displacement limit or the increment cap. Abaqus *STATIC, RIKS; LS-DYNA refuses it by
name; forms gain the arc-length group. A shallow arch of hex20 snaps through on the closed-form
path (1.9 %), both limit points found, inertia 0 → 1 → 0 between them.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
Procedure::Buckle {modes, shift}: the step's loads as a linear preload, K_σ from its stresses,
and (K + λ K_σ) φ = 0 by block Lanczos in the K inner product: K⁻¹(−K_σ) on Cholesky without a
shift, the buckling transformation (K + σ K_σ)⁻¹ K on LDLᵀ with one, whose inertia counts the
load factors below σ (Grimes–Lewis–Simon 1994). Lanczos gains an operand and an eigenvalue map
(defaults keep frequency steps bit for bit) and reports converged negative eigenvalues. Results
are frequency results with a `buckling` part; modes display with their load factor.
solve.buckle (in the Static drop-down); Abaqus *BUCKLE, Nastran SOL 105 and LS-DYNA refuse it by
name. Euler columns of hex20 within 0.18 % of Engesser's load.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhhZMBTviDQxZvwnyP89fo
Contact definitions on face sets: a pair (each surface's nodes against the
other's faces), general contact on a surface (self contact) or on every
exterior face of the solids; Coulomb friction with static and kinetic
coefficients and an exponential decay, a penalty scale and the choice to
adjust or refuse initially penetrating nodes, validated with caps. Rigid
walls of explicit steps gain friction. The check wants solid faces on
contact surfaces; sets used by a contact cannot be deleted.
fem::contact: the closest point of a triangle (Ericson) or a bilinear
quadrilateral (projected Newton) to a point, and a bucket grid of face
boxes for the global search, deterministic and bounded.
Commands interaction.contact.pair, .general, .edit, .delete and .find
(the touching parts of the mesh, with face sets and pairs made of them);
contacts in the model browser. Abaqus writes *SURFACE INTERACTION with
*FRICTION (exponential decay), *CONTACT PAIR and general *CONTACT; LS-DYNA
*CONTACT_AUTOMATIC_SURFACE_TO_SURFACE and _SINGLE_SURFACE with FS, FD, DC;
Nastran refuses contact by name. The implicit solver refuses contact by
name (M7); the explicit solver refuses it until the next commit.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
Two more large-strain options on the isotropic constants, decoupled like
neo-Hookean with the volume kappa/2 (J - 1)^2: Mooney-Rivlin with C10 = mu/2 - C01
(0 <= C01 <= mu/2) and Yeoh with C10 = mu/2 and the higher terms C20, C30, so the
small-strain material is the elastic one everywhere. MaterialModel::Polynomial
gives the isochoric stress and tangent from Holzapfel's fictitious quantities
(eqs. 6.168, 6.193), consistent by central differences, equal to neo-Hookean
with C10 alone; hybrid elements take it. Abaqus writes *HYPERELASTIC,
MOONEY-RIVLIN and YEOH; LS-DYNA keeps refusing hyperelastic materials in
nonlinear steps by name. Verified in uniaxial and equibiaxial tension and pure
shear against the compressible closed form (exact).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
Elements of a plastic material take the J2 material point: total Lagrangian
with nonlinear geometry, the small-strain loops without (elastic elements keep
their linear stiffness, so elastic results do not move). The plastic history is
committed per converged increment. Increments follow the step's load path,
ending at its points, the extrapolated predictor scaled by the change of the
load factor. Steps with path-dependent materials start an increment without a
predictor from the tangent predictor (the prescribed motion spread through the
converged tangent), and a first tangent that is not positive definite is a
cutback when the undeformed model's is. Refused by name: the Johnson-Cook rate
term (a static step has no time) and kinematic hardening at finite strain;
damage, erosion and adiabatic heating are left out with a warning. Results
carry the equivalent plastic strain at the integration points (solve.probe,
the step summary). LS-DYNA writes a load path as the step's curve; Abaqus
refuses it and a plastic deck of several general steps (Abaqus carries the
plastic state between them).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
A nonlinear_static procedure (nonlinear geometry, initial/min/max increments,
increment and iteration caps, force/displacement/energy tolerances, line
search), validated with caps against hostile values. Materials gain an
explicit hyperelastic option (decoupled compressible neo-Hookean on the
isotropic constants). Abaqus writes *STEP, NLGEOM, INC / *STATIC with the
increments and *HYPERELASTIC, NEO HOOKE; LS-DYNA writes the ramped implicit
run with full Newton and *CONTROL_IMPLICIT_AUTO; Nastran refuses SOL 400 by
name, as LS-DYNA does hyperelastic materials in nonlinear steps. Explicit
dynamics refuses hyperelastic materials by name; solve.run names the solver
still to come.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
Crates fieldcraft-*, binaries fieldcraft and fieldcraft-cli, the .fieldcraft file (format tag
fieldcraft/1, manifest fieldcraft.json), FIELDCRAFT_* environment variables, the MCP server
name, egui widget ids (fc_*), the app icon document FieldCraft.icon and its generated family,
docs and licences. No compatibility shim: no files of the earlier name exist.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* Model, fem and decks: point masses, rotary inertia, springs, dashpots and rod3 trusses
Model: PointMass and Spring definitions (spring | dashpot; to ground or
two-point; along a degree of freedom, a vector or the line of the ends) on a
set or reference point, resolved per node; ElementKind::Rod3. fem: rod2/rod3
truss kernel on Basis::Line2/Line3 declaring ElementDofs (translations).
Decks: Abaqus T3D3, MASS, ROTARYI, SPRING1/2/A, DASHPOT1/2/A; Nastran CONM1,
CELAS2, CDAMP2; LS-DYNA ELEMENT_MASS/INERTIA and ELEMENT_DISCRETE; what a
format cannot take is reported. Commands model.mass.* and model.spring.*.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* Implicit solver: trusses, point masses, rotary inertia and springs on the DofLayout
Trusses declare their translations like solids; point masses, inertia and
springs ask the layout for the kinds they need at their nodes (translations,
rotations), and reference points they use get six degrees of freedom. The
matrix pattern takes rows for those points; dashpots are ignored with a
warning. Existing results are bit-identical (hash-checked).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* Explicit solver: trusses, point masses, springs and dashpots on the node-major layout
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* docs: fem.md on trusses and discrete elements in the layout; regenerate features.md
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
* docs: trusses in plane models and corotational explicit trusses
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
---------
Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
- model: materials gain solver-neutral plastic (bilinear isotropic/kinematic,
hardening table, Johnson-Cook with adiabatic heating), damage (Johnson-Cook
D1-D5) and erosion (plastic strain); explicit steps gain nonlinear_geometry
(default on) and stress_rate (jaumann | green_naghdi).
- fem: rotation (Hughes-Winget, Flanagan-Taylor), plasticity (radial return,
capped bracketed Newton for Johnson-Cook, damage; the update takes the
mechanical strain increment so thermal strains can be subtracted), closed-form
hex8 gradients for deformed configurations.
- explicit: updated Lagrangian hex8/tet4, per-element material state, erosion
with reported energy, plastic work in the energy account.
- solver: warns that the linear solver uses the elastic constants of plastic
materials (results hash-identical).
- decks: Abaqus *PLASTIC (+ Johnson-Cook keywords), Nastran MATS1/TABLES1,
LS-DYNA *MAT_PLASTIC_KINEMATIC / *MAT_PIECEWISE_LINEAR_PLASTICITY; what a
format cannot express is reported as Unsupported.
- engine: model.material.plasticity, model.material.damage (catalogue ready),
explicit element probe, eroded elements in the solve summary.
Step commits before the rebase onto the DOF framework: branch explicit-x2-steps.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
Model: planar section kinds with Extent, element edges in sets, edge-weighted 2D loads,
centrifugal load, 2D model checks. fem: Plane kernels on Basis::{Tri3,Tri6,Quad4,Quad8}
declaring ElementDofs::new(DofSet::PLANE); QM6 incompatible modes with the
Wilson-Ibrahimbegovic correction. Solver: Kernel enum on the DofLayout; 3D results
bit-identical (hash-checked). Decks: Abaqus CPS/CPE/CAX, Nastran membranes and RFORCE,
LS-DYNA ELFORM 12/13. Mesh: free triangle mesher, planar region meshing, face boundaries.
Engine: mesh.planar with tagged edges. Analytic verification suite in solver/tests/plane.rs.
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Model: Newtonian fluid materials; fluid domains (box, spacing, conditions on
the box faces, obstacle bodies with conditions on their named faces, initial
velocity, body acceleration); fluid steps with caps. Deck writers refuse
fluid steps; a fluid-only model needs no mesh in model.check; one step
selector (Model::select_step) for every solver.
New L2 crate modelcraft-lbm: D3Q19 two-relaxation-time collision with Guo
forcing; halfway bounce-back walls (moving walls after Ladd), slip faces,
periodic pairs; Zou–He velocity and pressure faces with the D3Q19
transverse correction; obstacles voxelised from the face-tagged boundary
surface with exact predicates and symbolic perturbation; momentum-exchange
forces per box face and per B-rep face; unit conversion, automatic time step
and Mach/tau limits; bounded runs with frames and force histories.
Engine: model.fluid_domain.create/edit/delete, model.fluid_domain.boundary,
solve.fluid (obstacles from the open design or imported surfaces, lowerable
caps), solve.probe for fluid fields and wall force histories. Fluid Domain,
Inlet & Outlet and Lattice Boltzmann toolbar entries are ready.
Verification (analytic): plane Poiseuille exact with Λ = 3/16 and second
order (2.000) with Λ = 1/4; Couette exact with the wall shear; Taylor–Green
decay second order (2.01, 2.00); staircase pipe; Stokes drag of a sphere
array within 1.7% of Hasimoto at R = 6; Zou–He channel; mass conserved to
round-off; bit-for-bit reproducibility. Benchmark: Schäfer–Turek 2D-1.
Claude-Session: https://claude.ai/code/session_01NmAttHhUZTokgPeEJia8sm
Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
