UI scenarios: named views (save the view from the browser, change it, restore it); targets written ahead of their features, ignored until they land: sheet metal Fold, configurations, motion study, autosave and recovery. Harness: note steps, named-view and camera checks

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL

crates/ui-egui/tests/scenarios.rs

@@ -42,5 +42,25 @@ scenarios!(
     s17_toolbox_and_visibility,
     s18_3d_sketch_pipe,
     s19_canvas_calibrate,
-    s20_section_with_joint_drive
+    s20_section_with_joint_drive,
+    s21_named_views
+);
+
+/// Scenarios written ahead of their features (the commands are in solvecraft-params' unpushed
+/// work, their dialogs follow): run with `--ignored`, enabled once the features land.
+macro_rules! pending {
+    ($($name:ident: $why:literal),* $(,)?) => {
+        $(#[test]
+        #[ignore = $why]
+        fn $name() {
+            run(stringify!($name));
+        })*
+    };
+}
+
+pending!(
+    s22_sheet_metal_fold: "waits for SheetMetalFoldCmd and its dialog",
+    s23_configurations: "waits for configurations (FusionStartDesignConfigModeCmd, config.activate) and their panel",
+    s24_motion_study: "waits for FusionMotionStudyCommand and its dialog",
+    s25_autosave_recovery: "waits for autosave and Recover unsaved design",
 );

crates/ui-egui/tests/scenarios/s21_named_views.json

@@ -0,0 +1,102 @@
+[
+ {
+  "start": "SketchCreate"
+ },
+ {
+  "click": {
+   "plane": "XY"
+  }
+ },
+ {
+  "start": "ShapeRectangleTwoPoint"
+ },
+ {
+  "click": {
+   "sketch": [
+    0,
+    0
+   ]
+  }
+ },
+ {
+  "click": {
+   "sketch": [
+    40,
+    20
+   ]
+  }
+ },
+ {
+  "key": "Escape"
+ },
+ {
+  "start": "SketchStop"
+ },
+ {
+  "start": "Extrude"
+ },
+ {
+  "text": "10"
+ },
+ {
+  "key": "Enter"
+ },
+ {
+  "call": "ui.view",
+  "params": {
+   "view": "iso"
+  }
+ },
+ {
+  "call": "ui.menu",
+  "params": {
+   "x": 100,
+   "y": 300,
+   "target": {
+    "type": "named_views"
+   }
+  }
+ },
+ {
+  "call": "ui.menuPick",
+  "params": {
+   "item": "New Named View"
+  }
+ },
+ {
+  "expect": {
+   "named_views": 1
+  }
+ },
+ {
+  "call": "ui.view",
+  "params": {
+   "view": "top"
+  }
+ },
+ {
+  "call": "ui.menu",
+  "params": {
+   "x": 100,
+   "y": 300,
+   "target": {
+    "type": "named_view",
+    "name": "Named View1"
+   }
+  }
+ },
+ {
+  "call": "ui.menuPick",
+  "params": {
+   "item": "Restore"
+  }
+ },
+ {
+  "expect": {
+   "camera_matches": "Named View1"
+  }
+ },
+ {
+  "shot": "s21_restored"
+ }
+]

crates/ui-egui/tests/scenarios/s22_sheet_metal_fold.json

@@ -0,0 +1,32 @@
+[
+  {"note": "Target: sheet metal plate folded along a sketch line (SheetMetalFoldCmd, solvecraft-params; dialog by solvecraft-dialogs). Adjust the dialog steps when it lands."},
+  {"call": "ui.set", "params": {"tab": "SHEET METAL"}},
+  {"start": "SketchCreate"},
+  {"click": {"plane": "XY"}},
+  {"start": "ShapeRectangleTwoPoint"},
+  {"click": {"sketch": [0, 0]}},
+  {"click": {"sketch": [60, 40]}},
+  {"key": "Escape"},
+  {"start": "SketchStop"},
+  {"call": "ui.view", "params": {"view": "iso"}},
+  {"start": "FusionSheetMetalFlangeCommand"},
+  {"click": {"world": [30, 20, 0]}},
+  {"key": "Enter"},
+  {"expect": {"bodies": 1, "volume": 6000}},
+  {"start": "SketchCreate"},
+  {"click": {"world": [30, 20, 2.5]}},
+  {"start": "DrawPolyline"},
+  {"click": {"sketch": [40, -5]}},
+  {"click": {"sketch": [40, 45]}},
+  {"key": "Escape"},
+  {"key": "Escape"},
+  {"start": "SketchStop"},
+  {"start": "SheetMetalFoldCmd"},
+  {"click": {"world": [40, 20, 2.5]}},
+  {"key": "Enter"},
+  {"expect": {"bodies": 1, "errors": 0, "dialog": null, "volume": [6000, 1e-3]}},
+  {"shot": "s22_folded"},
+  {"start": "FusionSheetMetalFlatPatternCmd"},
+  {"widget": "Export DXF…"},
+  {"expect": {"file": "Untitled-Body1.dxf"}}
+]

crates/ui-egui/tests/scenarios/s23_configurations.json

@@ -0,0 +1,32 @@
+[
+  {"note": "Target: a configuration table switches the design (FusionStartDesignConfigModeCmd, config.row/column/activate by solvecraft-params; panel by solvecraft-dialogs). Adjust the panel steps when it lands."},
+  {"start": "SketchCreate"},
+  {"click": {"plane": "XY"}},
+  {"start": "ShapeRectangleTwoPoint"},
+  {"click": {"sketch": [0, 0]}},
+  {"click": {"sketch": [40, 20]}},
+  {"key": "Escape"},
+  {"start": "SketchDimension"},
+  {"click": {"sketch": [20, 0]}},
+  {"text": "40"},
+  {"key": "Enter"},
+  {"key": "Escape"},
+  {"start": "SketchStop"},
+  {"start": "Extrude"},
+  {"text": "10"},
+  {"key": "Enter"},
+  {"expect": {"volume": 8000}},
+  {"start": "FusionStartDesignConfigModeCmd"},
+  {"widget": "Add Column"},
+  {"widget": "d1"},
+  {"widget": "Add Row"},
+  {"widget": "40 mm", "near": "Configuration2"},
+  {"key": "A", "cmd": true},
+  {"text": "60 mm"},
+  {"key": "Enter"},
+  {"widget": "Activate", "near": "Configuration2"},
+  {"expect": {"param": {"d1": 60}, "volume": 12000, "errors": 0}},
+  {"widget": "Activate", "near": "Default"},
+  {"expect": {"param": {"d1": 40}, "volume": 8000}},
+  {"shot": "s23_configs"}
+]

crates/ui-egui/tests/scenarios/s24_motion_study.json

@@ -0,0 +1,49 @@
+[
+  {"note": "Target: a motion study keys a revolute joint and plays it (FusionMotionStudyCommand, motion.play by solvecraft-params; dialog by solvecraft-dialogs). Starts like s07; adjust the study steps when the dialog lands."},
+  {"start": "FusionCreateNewComponentCommand"},
+  {"key": "Enter"},
+  {"start": "SketchCreate"},
+  {"click": {"plane": "XY"}},
+  {"start": "ShapeRectangleTwoPoint"},
+  {"click": {"sketch": [0, 0]}},
+  {"click": {"sketch": [20, 20]}},
+  {"key": "Escape"},
+  {"start": "SketchStop"},
+  {"call": "ui.view", "params": {"view": "iso"}},
+  {"start": "Extrude"},
+  {"text": "10"},
+  {"key": "Enter"},
+  {"call": "ui.menu", "params": {"x": 100, "y": 170, "target": {"type": "component", "id": 0}}},
+  {"call": "ui.menuPick", "params": {"item": "Activate"}},
+  {"start": "FusionCreateNewComponentCommand"},
+  {"key": "Enter"},
+  {"start": "SketchCreate"},
+  {"click": {"plane": "XZ"}},
+  {"start": "ShapeRectangleTwoPoint"},
+  {"click": {"sketch": [30, 0]}},
+  {"click": {"sketch": [50, 10]}},
+  {"key": "Escape"},
+  {"start": "SketchStop"},
+  {"call": "ui.view", "params": {"view": "iso"}},
+  {"start": "Extrude"},
+  {"click": {"world": [40, 0, 5]}},
+  {"text": "20"},
+  {"key": "Enter"},
+  {"start": "JointAssembleCmdNew"},
+  {"click": {"world": [10, 10, 10]}},
+  {"click": {"world": [40, -20, 5]}},
+  {"widget": "Rigid"},
+  {"widget": "Revolute"},
+  {"widget": "OK"},
+  {"start": "FusionMotionStudyCommand"},
+  {"widget": "Add Key"},
+  {"widget": "0 deg", "near": "Value"},
+  {"key": "A", "cmd": true},
+  {"text": "90"},
+  {"key": "Enter"},
+  {"widget": "OK"},
+  {"expect": {"dialog": null, "errors": 0}},
+  {"call": "engine.execute", "params": {"command": "motion.play", "params": {"study": 1, "step": 100}}},
+  {"expect": {"query": {"command": "joint.list", "path": ["joints", 0, "values", 0, "value"], "value": 90}}},
+  {"shot": "s24_motion_end"}
+]

crates/ui-egui/tests/scenarios/s25_autosave_recovery.json

@@ -0,0 +1,17 @@
+[
+  {"note": "Target: unsaved work is autosaved and offered back after a crash (autosave, Recover unsaved design?, doc.recovery_list/doc.recover by solvecraft-params). The harness needs a 'restart' step (drop the app without saving, start a new one on the same recovery folder) once the recovery folder can be pointed at the scenario's folder."},
+  {"start": "SketchCreate"},
+  {"click": {"plane": "XY"}},
+  {"start": "ShapeRectangleTwoPoint"},
+  {"click": {"sketch": [0, 0]}},
+  {"click": {"sketch": [30, 20]}},
+  {"key": "Escape"},
+  {"start": "SketchStop"},
+  {"start": "Extrude"},
+  {"text": "10"},
+  {"key": "Enter"},
+  {"expect": {"bodies": 1, "volume": 6000}},
+  {"restart": "crash"},
+  {"widget": "Recover"},
+  {"expect": {"bodies": 1, "volume": 6000, "errors": 0}}
+]