Merge pull request #1712 from SychPL/feat/motion-analysis

Motion analysis: chart a study's joints and points, and find the parts that collide along it
This commit is contained in:
selune authored and GitHub committed 2026-10-17 00:09:37 +02:00
commit 37496198bf
23 files changed
+1588 -51

No files matched your search

+17
View File
@@ -7,6 +7,7 @@
"A new configuration, a copy of the active one": "新建配置,为当前配置的副本",
"AI": "AI",
"About SolidCraft": "关于 SolidCraft",
"Acceleration": "加速度",
"Active": "活动",
"Active rule": "活动规则",
"Add": "添加",
@@ -14,8 +15,10 @@
"Add Mid Radius": "添加中间半径",
"Add Row": "添加行",
"Add condition": "添加条件",
"Against": "对照",
"Alignment": "对齐",
"All Sketch Points": "所有草图点",
"All components": "所有零部件",
"All open designs": "所有打开的设计",
"Allowed expressions, separated by semicolons": "允许的表达式,以分号分隔",
"Also deletes": "同时删除",
@@ -57,6 +60,7 @@
"Configuration rules": "配置规则",
"Construction": "构造",
"Contact": "接触",
"Contact sets": "接触集",
"Continuity": "连续性",
"Copy Error Message": "复制错误消息",
"Copy Warning Message": "复制警告消息",
@@ -87,6 +91,7 @@
"Double-click to rename": "双击重命名",
"Double-clicking the middle button in the view: Home (the home view, framing what is shown), Fit (frame what is shown, keeping the orientation) or nothing": "在视图中双击中键:主视图(主视图,框住所显示的内容)、适合窗口(框住所显示的内容,保持方向)或无动作",
"Drive Joint": "驱动接头",
"Duration": "时长",
"Edges": "边",
"Edit Profile Sketch": "编辑轮廓草图",
"Enable rule": "启用规则",
@@ -150,6 +155,7 @@
"Move earlier": "向前移动",
"Move later": "向后移动",
"Name": "名称",
"New study": "新建研究",
"No crash reports.": "没有崩溃报告。",
"No matching appearances": "没有匹配的外观",
"No visible bodies to export.": "没有可导出的可见实体。",
@@ -168,8 +174,10 @@
"Per Edge": "每条边",
"Pick the tool bodies": "选择工具实体",
"Picked": "所选",
"Picked point": "选取的点",
"Place at the origin instead": "改为放置在原点",
"Playback": "播放",
"Plot": "图表",
"Position": "位置",
"Position (0 to 1)": "位置(0 到 1)",
"Position (G0)": "位置 (G0)",
@@ -178,6 +186,7 @@
"Preview leaves the current design unchanged.": "预览不会更改当前设计。",
"Profiles/Curves": "轮廓/曲线",
"Projection": "投影",
"Quantity": "物理量",
"RECENT": "最近使用",
"RULED SURFACE": "直纹曲面",
"Radius Fit": "半径拟合",
@@ -243,6 +252,7 @@
"Stand this part up?": "立起此零件?",
"Step": "步骤",
"Steps": "步数",
"Study": "研究",
"Style": "样式",
"Suppressed": "已抑制",
"Swap Ends": "交换端点",
@@ -272,6 +282,7 @@
"Use selected face as fixed plane": "使用所选面作为固定平面",
"VIEW": "视图",
"Value": "值",
"Velocity": "速度",
"Vertices": "顶点",
"View navigator": "视图导航器",
"Visible bodies only. Curves use line segments (0.01 mm tolerance).": "仅导出可见实体。曲线以线段近似(公差0.01毫米)。",
@@ -437,8 +448,10 @@
"cmd.motion_delete": "删除运动研究",
"cmd.motion_export": "导出运动研究",
"cmd.motion_export_animation": "导出运动动画",
"cmd.motion_interference": "运动研究干涉",
"cmd.motion_list": "列出运动研究",
"cmd.motion_play": "播放运动研究",
"cmd.motion_plot": "运动研究图表",
"cmd.motion_study": "运动研究",
"cmd.motion_trace": "运动轨迹",
"cmd.motion_trace_keep": "保留运动轨迹",
@@ -685,6 +698,10 @@
"joint.from_bodies_hint": "每个所选实体移入各自的新组件,位置保持不变。",
"joint.one_body": "两次选择都在 {body} 上。请在另一个零件上选择第二个。",
"joint.one_component": "这些零件是同一组件的实体:{bodies}。接头使一个组件相对另一个组件运动,因此每个零件都需要自己的组件。",
"motion.checked_to": "仅检查到第 {step} 步:检查已用完其工作量上限",
"motion.collision": "{a} · {b}:第 {steps} 步",
"motion.duration_hint": "秒(留空:按步)",
"motion.no_collisions": "整个研究中没有碰撞",
"nav.touchpad.help": "按住 Shift 并移动指针可平移;按住 Alt/Option 并移动可旋转。无需按鼠标按钮。垂直滚动可缩放。",
"nav.touchpad.label": "触控板",
"nav.touchpad.orbit": "旋转(按住 Alt/Option 并移动,无需鼠标按钮)",