1b-agent/OneCAD
1
0 Fork 0
forked from 1b-agent/solidcraft-upstream
Code Pull Requests Activity

Sheet metal: a hole drilled into a rim is a bore its panel keeps (#560) (#955)

Browse Source 
A hole drilled along a panel, into its rim, has no place in the flat pattern
as a cut-out, so every such hole was refused. It is now kept as a bore of that
panel, in flat coordinates, and cut only from that panel's material when the
folded part and its flat pattern are built, so the sheet still unfolds and
folds back with it. A hole that would run into a bend, or cross a panel at an
angle, is still refused. The flat pattern lists the bores.

The action matrix worker takes ACTION_MATRIX_ONLY (just these actions) and
ACTION_MATRIX_UNFOLD (unfold and refold every sheet after each action) for
rechecking one group by hand.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
This commit is contained in:
bherbruckandClaude Opus 5.5 authored and GitHub committed 2026-10-14 02:31:19 -04:00
1 parent b34d45233d
commit 6cb3025b72
8 files changed
+413 -90
Download Patch File Download Diff File Expand all files Collapse all files

No files matched your search

tests/action_matrix/baseline.json
+85 -85
View File
@@ -1037,14 +1037,14 @@
"Body1/F2:face:10|F2:face:12": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:10|F2:face:13": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:10|F2:face:19": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:11": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:11": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:11|F2:face:12": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:11|F2:face:20": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:11|F2:face:9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:12": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:12|F2:face:13": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:12|F2:face:9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:13": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:13": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:13|F2:face:21": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:13|F2:face:9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:14": "curved.axis curved.tangent_plane",
@@ -1074,23 +1074,23 @@
"Body1/F2:face:1|F2:face:2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:1|F2:face:3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:1|F2:face:4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:2": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:20": "face.angle_plane face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:20|F2:face:7": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:21": "face.angle_plane face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:21|F2:face:8": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:2|F2:face:4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:3": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:3|F2:face:4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:4": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:5": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:5": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:5|F2:face:7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:5|F2:face:8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:6": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:6": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:6|F2:face:7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:6|F2:face:8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:7": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:8": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:7": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:8": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:9": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/body": "body.copy body.mirror body.move body.pattern",
"Body1/v[F2:face:0 & F2:face:14 & F2:face:16 & F2:face:2]": "vertex.plane_three_points vertex.point",
@@ -8627,14 +8627,14 @@
"Body1/F2:face:1|F2:face:3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:1|F2:face:4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:1|F2:face:5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:2": "face.angle_plane face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:2": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:2|F2:face:3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:2|F2:face:5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:3": "face.angle_plane face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:3": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:3|F2:face:4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:4": "face.angle_plane face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:4": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:4|F2:face:5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:5": "face.angle_plane face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:5": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/body": "body.copy body.mirror body.move body.pattern",
"Body1/v[F2:face:0 & F2:face:2 & F2:face:3]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:0 & F2:face:2 & F2:face:5]": "vertex.plane_three_points vertex.point",
@@ -8676,19 +8676,19 @@
"Body1/F3:face:10|F3:face:5": "edge.axis edge.normal_plane edge.project",
"Body1/F3:face:11": "curved.axis curved.tangent_plane",
"Body1/F3:face:11|F3:face:6": "edge.axis edge.normal_plane edge.project",
"Body1/F3:face:5": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:5": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:5|F3:face:7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:5|F3:face:8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:5|F3:face:9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:6": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:6": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:6|F3:face:7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:6|F3:face:8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:6|F3:face:9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:7": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:7": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:7|F3:face:8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:8": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:8|F3:face:9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:9": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:9": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/body": "body.copy body.mirror body.move body.pattern",
"Body1/v[F2:face:0 & F2:face:3#[F2:face:0,F2:face:1,F2:face:4] & F2:face:3#[F3:face:10,F3:face:11,F3:face:9] & F3:face:10]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:0 & F2:face:3#[F2:face:0,F2:face:1,F2:face:4] & F2:face:4]": "vertex.plane_three_points vertex.point",
@@ -8719,21 +8719,21 @@
"Body1/F2:face:1|F3:face:35": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:1|F3:face:39": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:1|F3:face:43": "edge.axis edge.normal_plane edge.project",
"Body1/F3:face:10": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:face:10": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:face:10|F3:face:11": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:10|F3:face:12": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:10|F3:face:13": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:10|F3:face:14": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:10|F3:face:15": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:10|F3:face:35": "edge.axis edge.normal_plane edge.project",
"Body1/F3:face:11": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:face:11": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:face:11|F3:face:12": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:11|F3:face:15": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:11|F3:face:9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:12": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:face:12|F3:face:13": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:12|F3:face:9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:13": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:face:13": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:face:13|F3:face:14": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:13|F3:face:9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:14": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull !face.shell !face.sketch",
@@ -8742,52 +8742,52 @@
"Body1/F3:face:15": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull !face.shell !face.sketch",
"Body1/F3:face:15|F3:face:36": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:15|F3:face:9": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:16": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:face:16": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:face:16|F3:face:18": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:16|F3:face:19": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:16|F3:face:20": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:16|F3:face:21": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:16|F3:face:22": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:16|F3:face:38": "edge.axis edge.normal_plane edge.project",
"Body1/F3:face:17": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:face:17": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:face:17|F3:face:18": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:17|F3:face:19": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:17|F3:face:20": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:17|F3:face:21": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:17|F3:face:22": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:17|F3:face:39": "edge.axis edge.normal_plane edge.project",
"Body1/F3:face:18": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:face:18": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:face:18|F3:face:19": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:18|F3:face:22": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:19": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:face:19|F3:face:20": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:2": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:face:20": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:face:2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:face:20": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:face:20|F3:face:21": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:21": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull !face.shell !face.sketch",
"Body1/F3:face:21|F3:face:41": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:22": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull !face.shell !face.sketch",
"Body1/F3:face:22|F3:face:40": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:23": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:face:23": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:face:23|F3:face:25": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:23|F3:face:26": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:23|F3:face:27": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:23|F3:face:28": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:23|F3:face:29": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:23|F3:face:42": "edge.axis edge.normal_plane edge.project",
"Body1/F3:face:24": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:face:24": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:face:24|F3:face:25": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:24|F3:face:26": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:24|F3:face:27": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:24|F3:face:28": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:24|F3:face:29": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:24|F3:face:43": "edge.axis edge.normal_plane edge.project",
"Body1/F3:face:25": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:face:25": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:face:25|F3:face:26": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:25|F3:face:29": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:26": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:face:26|F3:face:27": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:27": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:face:27": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:face:27|F3:face:28": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:28": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull !face.shell !face.sketch",
"Body1/F3:face:28|F3:face:45": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
@@ -8799,7 +8799,7 @@
"Body1/F3:face:2|F3:face:6": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:2|F3:face:7": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:2|F3:face:8": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:3": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:face:3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:face:30": "curved.axis curved.tangent_plane",
"Body1/F3:face:30|F3:face:32": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:30|F3:face:33": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
@@ -8834,7 +8834,7 @@
"Body1/F3:face:3|F3:face:6": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:3|F3:face:7": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:3|F3:face:8": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:4": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:face:4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:face:40": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:face:40|F3:face:45": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:41": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
@@ -8850,11 +8850,11 @@
"Body1/F3:face:4|F3:face:8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:5": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:face:5|F3:face:6": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:6": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:face:6": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:face:6|F3:face:7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:7": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull !face.shell !face.sketch",
"Body1/F3:face:8": "face.angle_plane !face.draft_neutral !face.extrude !face.hole !face.offset_plane !face.press_pull !face.shell !face.sketch",
"Body1/F3:face:9": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:face:9": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/body": "body.copy body.mirror body.move body.pattern",
"Body1/v[F2:face:0 & F3:face:30 & F3:face:32 & F3:face:34 & F3:face:37]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:0 & F3:face:30 & F3:face:33 & F3:face:42 & F3:face:44]": "vertex.plane_three_points vertex.point",
@@ -8925,7 +8925,7 @@
"Body1/F2:face:1|F2:face:4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:1|F2:face:5#[F2:face:0,F2:face:1,F2:face:4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:1|F3:face:11": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:3#[F2:face:0,F2:face:1,F2:face:4]": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:3#[F2:face:0,F2:face:1,F2:face:4]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:3#[F2:face:0,F2:face:1,F2:face:4]|F2:face:3#[F3:face:10,F3:face:11,F3:face:9]": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:3#[F2:face:0,F2:face:1,F2:face:4]|F2:face:4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:3#[F3:face:10,F3:face:11,F3:face:9]": "face.angle_plane face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
@@ -8934,7 +8934,7 @@
"Body1/F2:face:3#[F3:face:10,F3:face:11,F3:face:9]|F3:face:9": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:4": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:4|F2:face:5#[F2:face:0,F2:face:1,F2:face:4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:5#[F2:face:0,F2:face:1,F2:face:4]": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:5#[F2:face:0,F2:face:1,F2:face:4]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:5#[F2:face:0,F2:face:1,F2:face:4]|F2:face:5#[F3:face:10,F3:face:11,F3:face:7]": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:5#[F3:face:10,F3:face:11,F3:face:7]": "face.angle_plane face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:5#[F3:face:10,F3:face:11,F3:face:7]|F3:face:10": "edge.chamfer edge.fillet edge.normal_plane edge.project",
@@ -8944,19 +8944,19 @@
"Body1/F3:face:10|F3:face:5": "edge.axis edge.normal_plane edge.project",
"Body1/F3:face:11": "curved.axis curved.tangent_plane",
"Body1/F3:face:11|F3:face:6": "edge.axis edge.normal_plane edge.project",
"Body1/F3:face:5": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:5": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:5|F3:face:7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:5|F3:face:8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:5|F3:face:9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:6": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:6": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:6|F3:face:7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:6|F3:face:8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:6|F3:face:9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:7": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:7": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:7|F3:face:8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:8": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:8|F3:face:9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:9": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:9": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/body": "body.copy body.mirror body.move body.pattern",
"Body1/v[F2:face:0 & F2:face:3#[F2:face:0,F2:face:1,F2:face:4] & F2:face:3#[F3:face:10,F3:face:11,F3:face:9] & F3:face:10]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:0 & F2:face:3#[F2:face:0,F2:face:1,F2:face:4] & F2:face:4]": "vertex.plane_three_points vertex.point",
@@ -9001,19 +9001,19 @@
"Body1/F2:face:5#[F3:face:14,F3:face:15,F3:face:8]|F3:face:14": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:5#[F3:face:14,F3:face:15,F3:face:8]|F3:face:15": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:5#[F3:face:14,F3:face:15,F3:face:8]|F3:face:8": "edge.axis edge.normal_plane edge.project",
"Body1/F3:face:10": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:10": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:10|F3:face:11": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:10|F3:face:12": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:10|F3:face:13": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:10|F3:face:19": "edge.axis edge.normal_plane edge.project",
"Body1/F3:face:11": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:11": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:11|F3:face:12": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:11|F3:face:20": "edge.axis edge.normal_plane edge.project",
"Body1/F3:face:11|F3:face:9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:12": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:12|F3:face:13": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:12|F3:face:9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:13": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:13": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:13|F3:face:9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:14": "curved.axis curved.tangent_plane",
"Body1/F3:face:14|F3:face:16": "edge.chamfer edge.fillet edge.normal_plane edge.project",
@@ -9029,20 +9029,20 @@
"Body1/F3:face:19": "curved.axis curved.tangent_plane",
"Body1/F3:face:19|F3:face:20": "edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:20": "face.angle_plane face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:4": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:4|F3:face:6": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:4|F3:face:7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:4|F3:face:8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:5": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:5": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:5|F3:face:6": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:5|F3:face:7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:5|F3:face:8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:6": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:6": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:6|F3:face:7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:7": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:7|F3:face:8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:8": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:9": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:8": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:9": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/body": "body.copy body.mirror body.move body.pattern",
"Body1/v[F2:face:0 & F2:face:3#[F2:face:0,F2:face:1,F3:face:16] & F2:face:3#[F3:face:13,F3:face:18,F3:face:19] & F3:face:18]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:0 & F2:face:3#[F2:face:0,F2:face:1,F3:face:16] & F3:face:14 & F3:face:16]": "vertex.plane_three_points vertex.point",
@@ -9082,14 +9082,14 @@
"Body1/F2:face:10|F2:face:12": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:10|F2:face:13": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:10|F2:face:19": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:11": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:11": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:11|F2:face:12": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:11|F2:face:20": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:11|F2:face:9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:12": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:12|F2:face:13": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:12|F2:face:9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:13": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:13": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:13|F2:face:21": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:13|F2:face:9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:14": "curved.axis curved.tangent_plane",
@@ -9119,23 +9119,23 @@
"Body1/F2:face:1|F2:face:2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:1|F2:face:3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:1|F2:face:4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:2": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:20": "face.angle_plane face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:20|F2:face:7": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:21": "face.angle_plane face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:21|F2:face:8": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:2|F2:face:4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:3": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:3|F2:face:4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:4": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:5": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:5": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:5|F2:face:7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:5|F2:face:8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:6": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:6": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:6|F2:face:7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:6|F2:face:8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:7": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:8": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:7": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:8": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:9": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/body": "body.copy body.mirror body.move body.pattern",
"Body1/v[F2:face:0 & F2:face:14 & F2:face:16 & F2:face:2]": "vertex.plane_three_points vertex.point",
@@ -9202,23 +9202,23 @@
"Body1/F3:face:6|F3:face:7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:6|F3:face:9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:6|F4:face:19": "edge.axis edge.normal_plane edge.project",
"Body1/F3:face:7": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:7": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:7|F4:face:20": "edge.axis edge.normal_plane edge.project",
"Body1/F3:face:9": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:9": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:9|F4:face:21": "edge.axis edge.normal_plane edge.project",
"Body1/F4:face:10": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F4:face:10": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F4:face:10|F4:face:11": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:face:10|F4:face:12": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:face:10|F4:face:13": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:face:10|F4:face:19": "edge.axis edge.normal_plane edge.project",
"Body1/F4:face:11": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F4:face:11": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F4:face:11|F4:face:12": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:face:11|F4:face:20": "edge.axis edge.normal_plane edge.project",
"Body1/F4:face:11|F4:face:9": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F4:face:12": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F4:face:12|F4:face:13": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:face:12|F4:face:9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:face:13": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F4:face:13": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F4:face:13|F4:face:21": "edge.axis edge.normal_plane edge.project",
"Body1/F4:face:13|F4:face:9": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F4:face:18": "curved.axis curved.tangent_plane",
@@ -9281,7 +9281,7 @@
"Body1/F2:face:5#[F4:face:0,F4:face:13]": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:5#[F4:face:0,F4:face:13]|F4:face:0#[F2:face:3,F2:face:5,F6:side:l2,F6:side:l3,F6:side:l4,F7:face:21,F7:face:25,F7:face:29]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:5#[F4:face:0,F4:face:13]|F4:face:13#[F2:face:3,F2:face:5,F6:side:l2,F6:side:l3,F6:side:l4,F7:face:20,F7:face:24,F7:face:28]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:11": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:11": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:11|F3:face:12": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:11|F4:face:0#[F3:face:11,F3:face:12,F3:face:13,F6:side:l1,F6:side:l2,F6:side:l4,F7:face:25,F7:face:29]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:11|F4:face:13#[F3:face:11,F3:face:12,F3:face:13,F6:side:l1,F6:side:l2,F6:side:l4,F7:face:24,F7:face:28]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
@@ -9289,10 +9289,10 @@
"Body1/F3:face:12|F3:face:13": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:12|F4:face:0#[F3:face:11,F3:face:12,F3:face:13,F6:side:l1,F6:side:l2,F6:side:l4,F7:face:25,F7:face:29]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:12|F4:face:13#[F3:face:11,F3:face:12,F3:face:13,F6:side:l1,F6:side:l2,F6:side:l4,F7:face:24,F7:face:28]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:13": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:13": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:13|F4:face:0#[F3:face:11,F3:face:12,F3:face:13,F6:side:l1,F6:side:l2,F6:side:l4,F7:face:25,F7:face:29]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:13|F4:face:13#[F3:face:11,F3:face:12,F3:face:13,F6:side:l1,F6:side:l2,F6:side:l4,F7:face:24,F7:face:28]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:6": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:6": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:6|F3:face:7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:6|F4:face:0#[F3:face:6,F3:face:7,F3:face:8,F7:face:21]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:6|F4:face:13#[F3:face:6,F3:face:7,F3:face:8,F7:face:20]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
@@ -9301,7 +9301,7 @@
"Body1/F3:face:7|F3:face:8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:7|F4:face:0#[F3:face:6,F3:face:7,F3:face:8,F7:face:21]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:7|F4:face:13#[F3:face:6,F3:face:7,F3:face:8,F7:face:20]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:8": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:8": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:8|F4:face:0#[F3:face:6,F3:face:7,F3:face:8,F7:face:21]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:8|F4:face:13#[F3:face:6,F3:face:7,F3:face:8,F7:face:20]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:face:0#[F2:face:3,F2:face:5,F6:side:l2,F6:side:l3,F6:side:l4,F7:face:21,F7:face:25,F7:face:29]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
@@ -9311,13 +9311,13 @@
"Body1/F4:face:0#[F2:face:3,F2:face:5,F6:side:l2,F6:side:l3,F6:side:l4,F7:face:21,F7:face:25,F7:face:29]|F7:face:21": "edge.axis edge.normal_plane edge.project",
"Body1/F4:face:0#[F2:face:3,F2:face:5,F6:side:l2,F6:side:l3,F6:side:l4,F7:face:21,F7:face:25,F7:face:29]|F7:face:25": "edge.axis edge.normal_plane edge.project",
"Body1/F4:face:0#[F2:face:3,F2:face:5,F6:side:l2,F6:side:l3,F6:side:l4,F7:face:21,F7:face:25,F7:face:29]|F7:face:29": "edge.axis edge.normal_plane edge.project",
"Body1/F4:face:0#[F3:face:11,F3:face:12,F3:face:13,F6:side:l1,F6:side:l2,F6:side:l4,F7:face:25,F7:face:29]": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F4:face:0#[F3:face:11,F3:face:12,F3:face:13,F6:side:l1,F6:side:l2,F6:side:l4,F7:face:25,F7:face:29]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F4:face:0#[F3:face:11,F3:face:12,F3:face:13,F6:side:l1,F6:side:l2,F6:side:l4,F7:face:25,F7:face:29]|F6:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:face:0#[F3:face:11,F3:face:12,F3:face:13,F6:side:l1,F6:side:l2,F6:side:l4,F7:face:25,F7:face:29]|F6:side:l2#[F4:face:0,F4:face:13,F6:side:l1]": "edge.axis !edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:face:0#[F3:face:11,F3:face:12,F3:face:13,F6:side:l1,F6:side:l2,F6:side:l4,F7:face:25,F7:face:29]|F6:side:l4#[F4:face:0,F4:face:13,F6:side:l1]": "edge.axis !edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:face:0#[F3:face:11,F3:face:12,F3:face:13,F6:side:l1,F6:side:l2,F6:side:l4,F7:face:25,F7:face:29]|F7:face:25": "edge.axis edge.normal_plane edge.project",
"Body1/F4:face:0#[F3:face:11,F3:face:12,F3:face:13,F6:side:l1,F6:side:l2,F6:side:l4,F7:face:25,F7:face:29]|F7:face:29": "edge.axis edge.normal_plane edge.project",
"Body1/F4:face:0#[F3:face:6,F3:face:7,F3:face:8,F7:face:21]": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F4:face:0#[F3:face:6,F3:face:7,F3:face:8,F7:face:21]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F4:face:0#[F3:face:6,F3:face:7,F3:face:8,F7:face:21]|F7:face:21": "edge.axis edge.normal_plane edge.project",
"Body1/F4:face:13#[F2:face:3,F2:face:5,F6:side:l2,F6:side:l3,F6:side:l4,F7:face:20,F7:face:24,F7:face:28]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F4:face:13#[F2:face:3,F2:face:5,F6:side:l2,F6:side:l3,F6:side:l4,F7:face:20,F7:face:24,F7:face:28]|F6:side:l2#[F4:face:0,F4:face:13,F6:side:l3]": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
@@ -9326,15 +9326,15 @@
"Body1/F4:face:13#[F2:face:3,F2:face:5,F6:side:l2,F6:side:l3,F6:side:l4,F7:face:20,F7:face:24,F7:face:28]|F7:face:20": "edge.axis edge.normal_plane edge.project",
"Body1/F4:face:13#[F2:face:3,F2:face:5,F6:side:l2,F6:side:l3,F6:side:l4,F7:face:20,F7:face:24,F7:face:28]|F7:face:24": "edge.axis edge.normal_plane edge.project",
"Body1/F4:face:13#[F2:face:3,F2:face:5,F6:side:l2,F6:side:l3,F6:side:l4,F7:face:20,F7:face:24,F7:face:28]|F7:face:28": "edge.axis edge.normal_plane edge.project",
"Body1/F4:face:13#[F3:face:11,F3:face:12,F3:face:13,F6:side:l1,F6:side:l2,F6:side:l4,F7:face:24,F7:face:28]": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F4:face:13#[F3:face:11,F3:face:12,F3:face:13,F6:side:l1,F6:side:l2,F6:side:l4,F7:face:24,F7:face:28]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F4:face:13#[F3:face:11,F3:face:12,F3:face:13,F6:side:l1,F6:side:l2,F6:side:l4,F7:face:24,F7:face:28]|F6:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:face:13#[F3:face:11,F3:face:12,F3:face:13,F6:side:l1,F6:side:l2,F6:side:l4,F7:face:24,F7:face:28]|F6:side:l2#[F4:face:0,F4:face:13,F6:side:l1]": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F4:face:13#[F3:face:11,F3:face:12,F3:face:13,F6:side:l1,F6:side:l2,F6:side:l4,F7:face:24,F7:face:28]|F6:side:l4#[F4:face:0,F4:face:13,F6:side:l1]": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F4:face:13#[F3:face:11,F3:face:12,F3:face:13,F6:side:l1,F6:side:l2,F6:side:l4,F7:face:24,F7:face:28]|F7:face:24": "edge.axis edge.normal_plane edge.project",
"Body1/F4:face:13#[F3:face:11,F3:face:12,F3:face:13,F6:side:l1,F6:side:l2,F6:side:l4,F7:face:24,F7:face:28]|F7:face:28": "edge.axis edge.normal_plane edge.project",
"Body1/F4:face:13#[F3:face:6,F3:face:7,F3:face:8,F7:face:20]": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F4:face:13#[F3:face:6,F3:face:7,F3:face:8,F7:face:20]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F4:face:13#[F3:face:6,F3:face:7,F3:face:8,F7:face:20]|F7:face:20": "edge.axis edge.normal_plane edge.project",
"Body1/F6:side:l1": "face.angle_plane !face.draft_neutral !face.extrude !face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
"Body1/F6:side:l1": "face.angle_plane !face.draft_neutral !face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",
"Body1/F6:side:l1|F6:side:l2#[F4:face:0,F4:face:13,F6:side:l1]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F6:side:l1|F6:side:l4#[F4:face:0,F4:face:13,F6:side:l1]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F6:side:l2#[F4:face:0,F4:face:13,F6:side:l1]": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",
@@ -9444,33 +9444,33 @@
"Body1/F3:face:11": "curved.axis curved.tangent_plane",
"Body1/F3:face:11|F3:face:6": "edge.axis edge.normal_plane edge.project",
"Body1/F3:face:11|F4:face:18": "!edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:5": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:face:5": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:face:5|F3:face:7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:5|F3:face:8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:5|F3:face:9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:5|F4:face:9": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:6": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:face:6": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:face:6|F3:face:7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:6|F3:face:8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:6|F3:face:9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:6|F4:face:9": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:7": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:face:7": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:face:7|F3:face:8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:8": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:face:8|F3:face:9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:9": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:face:9": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:face:9|F4:face:9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:face:10": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F4:face:10": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F4:face:10|F4:face:12": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F4:face:10|F4:face:13": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:face:10|F4:face:14": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:face:10|F4:face:19": "edge.axis edge.normal_plane edge.project",
"Body1/F4:face:11": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F4:face:11": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F4:face:11|F4:face:12": "edge.axis edge.chamfer !edge.fillet edge.normal_plane edge.project",
"Body1/F4:face:11|F4:face:13": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:face:11|F4:face:14": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:face:11|F4:face:20": "edge.axis edge.normal_plane edge.project",
"Body1/F4:face:12": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F4:face:12": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F4:face:12|F4:face:13": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F4:face:12|F4:face:21": "edge.axis edge.normal_plane edge.project",
"Body1/F4:face:13": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
@@ -9546,7 +9546,7 @@
"Body1/F2:face:3#[F3:face:10,F3:face:11,F3:face:9]|F3:face:9": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:4": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:4|F2:face:5#[F2:face:0,F2:face:1,F2:face:4]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:5#[F2:face:0,F2:face:1,F2:face:4]": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:5#[F2:face:0,F2:face:1,F2:face:4]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:5#[F2:face:0,F2:face:1,F2:face:4]|F2:face:5#[F3:face:10,F3:face:11,F3:face:7]": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:5#[F3:face:10,F3:face:11,F3:face:7]": "face.angle_plane face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:5#[F3:face:10,F3:face:11,F3:face:7]|F3:face:10": "edge.chamfer edge.fillet edge.normal_plane edge.project",
@@ -9556,19 +9556,19 @@
"Body1/F3:face:10|F3:face:5": "edge.axis edge.normal_plane edge.project",
"Body1/F3:face:11": "curved.axis curved.tangent_plane",
"Body1/F3:face:11|F3:face:6": "edge.axis edge.normal_plane edge.project",
"Body1/F3:face:5": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:5": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:5|F3:face:7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:5|F3:face:8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:5|F3:face:9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:6": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:6": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:6|F3:face:7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:6|F3:face:8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:6|F3:face:9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:7": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:7": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:7|F3:face:8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:8": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:8|F3:face:9": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:9": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:9": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/body": "body.copy body.mirror body.move body.pattern",
"Body1/v[F2:face:0 & F2:face:3#[F2:face:0,F2:face:1,F2:face:4] & F2:face:3#[F3:face:10,F3:face:11,F3:face:9] & F3:face:10]": "vertex.plane_three_points vertex.point",
"Body1/v[F2:face:0 & F2:face:3#[F2:face:0,F2:face:1,F2:face:4] & F2:face:4]": "vertex.plane_three_points vertex.point",
@@ -11145,7 +11145,7 @@
"Body1/F2:face:2|F2:face:5#[F2:face:0,F2:face:1,F2:face:2]": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F2:face:3": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F2:face:3|F3:face:12": "edge.axis edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F2:face:5#[F2:face:0,F2:face:1,F2:face:2]": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude !face.hole face.midplane face.midplane+edit face.offset_plane face.offset_plane+edit face.press_pull face.shell face.shell+edit face.sketch",
"Body1/F2:face:5#[F2:face:0,F2:face:1,F2:face:2]": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude face.hole face.midplane face.midplane+edit face.offset_plane face.offset_plane+edit face.press_pull face.shell face.shell+edit face.sketch",
"Body1/F2:face:5#[F2:face:0,F2:face:1,F2:face:2]|F2:face:5#[F3:face:10,F3:face:11,F3:face:9]": "edge.axis edge.normal_plane edge.project",
"Body1/F2:face:5#[F3:face:10,F3:face:11,F3:face:9]": "face.angle_plane face.extrude !face.hole face.midplane face.midplane+edit face.offset_plane face.offset_plane+edit face.press_pull face.shell face.sketch",
"Body1/F2:face:5#[F3:face:10,F3:face:11,F3:face:9]|F3:face:10": "edge.chamfer edge.fillet edge.normal_plane edge.project",
@@ -11159,19 +11159,19 @@
"Body1/F3:face:11|F3:face:6": "edge.axis edge.normal_plane edge.project",
"Body1/F3:face:12": "face.angle_plane face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch face.sketch+edit",
"Body1/F3:face:12|F3:face:7": "edge.axis edge.axis+edit edge.normal_plane edge.project edge.project+edit",
"Body1/F3:face:5": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:face:5": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",
"Body1/F3:face:5|F3:face:7": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:5|F3:face:8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:5|F3:face:9": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:6": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull face.press_pull+edit face.shell face.sketch",
"Body1/F3:face:6": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.press_pull+edit face.shell face.sketch",
"Body1/F3:face:6|F3:face:7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:6|F3:face:8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",
"Body1/F3:face:6|F3:face:9": "edge.axis edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F3:face:7": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude !face.hole face.midplane face.midplane+edit face.offset_plane face.press_pull face.shell face.shell+edit face.sketch",
"Body1/F3:face:7": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude face.hole face.midplane face.midplane+edit face.offset_plane face.press_pull face.shell face.shell+edit face.sketch",
"Body1/F3:face:7|F3:face:8": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",
"Body1/F3:face:8": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",
"Body1/F3:face:8|F3:face:9": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.normal_plane+edit edge.project",
"Body1/F3:face:9": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.shell+edit face.sketch",
"Body1/F3:face:9": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.shell+edit face.sketch",
"Body1/F5:side:c1#1": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
"Body1/F5:side:c1#2": "curved.axis curved.tangent_plane curved.tangent_plane+edit",
"Body1/F5:side:c2#1": "curved.axis curved.tangent_plane",