Curvature-continuous (G2) fillets for straight planar edges (#862)

Fillet gets a Curvature (G2) radius type (type: "curvature", alias "g2"): a quintic blend whose size is the equivalent circular setback, for convex and concave straight edges between planar faces with a perpendicular planar end face at each end. Unsupported cases are refused rather than falling back to a circular fillet, and a blend that would cross a loop in its end face is refused. Persisted as a fillet style under format 19; labels in en/de/ja/ko/zh.

Co-authored-by: midasdf <midasdf@users.noreply.github.com>

crates/engine/src/cmd/features.rs

@@ -31,7 +31,7 @@ pub static COMMANDS: &[CommandSpec] = &[
         .at("SOLID", "MODIFY")
         .icon("fillet")
         .key("F")
-        .params("edges: [[x,y,z] point on edge | {body, index}]; radius: expr; body?; type?: constant|chord (radius is the width across)|variable (radius at the end nearest start, radius2 at the other; one end may be 0, where the round closes to the corner)|spline (the radius along the edge is a clamped B-spline from the end nearest start: radius is its first control radius, radii the rest, knots its knot vector from 0 to 1; one end may be 0); radius2?; start?: [x,y,z]; radii?: [expr, …]; knots?: [number, …]; mid?: [[position 0…1 from start, radius expr], …] (variable radii between the ends); smooth?: bool (smooth instead of straight between the radii); fit?: exact|reduce|taper (exact, the default: a radius too large for the geometry around the edges is refused; reduce: where it doesn't fit it is reduced to the largest that does, one radius for edges sharing a face; the smallest used is returned as `radius_applied`, each edge's as `radii_applied: [{edge: [x,y,z], radius}]`, and noted in the feature's warning; taper: along each straight edge between planar faces where it doesn't fit, the radius follows the room there as a smooth spline, down to 0 where a face closes to a point, noted in the feature's warning)"),
+        .params("edges: [[x,y,z] point on edge | {body, index}]; radius: expr; body?; type?: constant|curvature (alias g2: curvature-continuous quintic between planar faces along straight edges, one perpendicular planar end face at each end; radius sets the equivalent circular setback, not constant curvature; exact fit only)|chord (radius is the width across)|variable (radius at the end nearest start, radius2 at the other; one end may be 0, where the round closes to the corner)|spline (the radius along the edge is a clamped B-spline from the end nearest start: radius is its first control radius, radii the rest, knots its knot vector from 0 to 1; one end may be 0); radius2?; start?: [x,y,z]; radii?: [expr, …]; knots?: [number, …]; mid?: [[position 0…1 from start, radius expr], …] (variable radii between the ends); smooth?: bool (smooth instead of straight between the radii); fit?: exact|reduce|taper (exact, the default: a radius too large for the geometry around the edges is refused; reduce: where it doesn't fit it is reduced to the largest that does, one radius for edges sharing a face; the smallest used is returned as `radius_applied`, each edge's as `radii_applied: [{edge: [x,y,z], radius}]`, and noted in the feature's warning; taper: along each straight edge between planar faces where it doesn't fit, the radius follows the room there as a smooth spline, down to 0 where a face closes to a point, noted in the feature's warning)"),
     CommandSpec::new("solid.chamfer", "Chamfer", chamfer).at("SOLID", "MODIFY").icon("chamfer").params("edges: [[x,y,z] | {body, index}]; distance: expr; distance2?: expr (along the second face) | angle?: expr (from the first face); flip?: bool (which face is first: by default the one facing up most); body?"),
     CommandSpec::new("solid.combine", "Combine", combine).at("SOLID", "MODIFY").icon("combine").params("target: body; tools: [body]; operation?: join|cut|intersect; keep_tools?: bool; new_component?: bool (the result goes into a new component; component_name?)"),
     CommandSpec::new("solid.pattern.rectangular", "Rectangular Pattern", pattern_rect)
@@ -857,6 +857,7 @@ fn fillet(s: &mut Session, p: &Value) -> Result<Value> {
     let style = match str_(p, "type").map(str::to_ascii_lowercase).as_deref() {
         None | Some("constant") | Some("rolling_ball") => solidcraft_doc::FilletStyle::Constant,
         Some("chord") | Some("chord_length") => solidcraft_doc::FilletStyle::Chord,
+        Some("curvature") | Some("g2") => solidcraft_doc::FilletStyle::Curvature,
         Some("variable") => {
             let radius2 = req_expr(cmd, p, "radius2")?;
             check_expr(s, &radius2, Kind::Length, cmd, "radius2")?;
@@ -906,7 +907,7 @@ fn fillet(s: &mut Session, p: &Value) -> Result<Value> {
             }
             solidcraft_doc::FilletStyle::Spline { start, knots, radii }
         }
-        Some(o) => return Err(bad(cmd, format!("unknown fillet type `{o}` (constant, chord, variable or spline)"))),
+        Some(o) => return Err(bad(cmd, format!("unknown fillet type `{o}` (constant, chord, variable, spline or curvature)"))),
     };
     let fit = match str_(p, "fit").map(str::to_ascii_lowercase).as_deref() {
         None | Some("exact") => solidcraft_doc::FilletFit::Exact,