Acceptance project (#27): examples/acceptance/sensor_enclosure.json, a sensor enclosure sized from user parameters (case with USB cut-out, patterned PCB standoffs and lid bosses, snap fit; lid with a lip from offsets of the case's rim and patterned screw holes). Scenario acceptance_sensor_enclosure edits it (USB moved, suppress and back, save and reopen, STEP out and back in); pending scenarios for what fails: #40 (lid lip after a resize), #41 (snap fit after a resize), #42 (pattern of a suppressed feature), #29 (Lip on the rounded rim). Harness: a script step runs a command script, $DIR in call parameters is the scenario's folder

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01RjGw4gA5ZvKrU8MQP6sBgT

crates/ui-egui/src/scenario.rs

@@ -27,6 +27,8 @@
 //!   `{"dimension": "d1"}` or `{"handle": "arrow"}` (a manipulator handle: see [`publish_handle`])
 //! - `{"autosave": true}`: autosave into the scenario's recovery folder; `{"restart": "crash" |
 //!   "close"}`: the app dies (or closes) and a new one starts on the same folders
+//! - `{"script": "examples/…/x.json"}`: run a command script through the engine; `"$DIR"` in a
+//!   `call` step's string parameters is the scenario's folder
 //! - `{"note": "…"}`: a comment; `{"pending": "why"}`: the scenario waits for a fix (its test
 //!   is ignored)
 //! - `{"expect": {…}}`: checks, see [`check`]; `{"until": {…}}` waits (frames) until they pass
@@ -95,6 +97,16 @@ pub fn clear_handles() {
     COUNTS.with(|h| h.borrow_mut().clear());
 }
 
+/// `v` with "$DIR" in its strings replaced by `dir`.
+fn with_dir(v: Value, dir: &str) -> Value {
+    match v {
+        Value::String(t) => Value::String(t.replace("$DIR", dir)),
+        Value::Array(a) => Value::Array(a.into_iter().map(|x| with_dir(x, dir)).collect()),
+        Value::Object(o) => Value::Object(o.into_iter().map(|(k, x)| (k, with_dir(x, dir))).collect()),
+        other => other,
+    }
+}
+
 /// A fresh folder for one scenario's files.
 fn scratch_dir() -> PathBuf {
     use std::sync::atomic::{AtomicUsize, Ordering};
@@ -363,8 +375,24 @@ impl Harness {
                     return Err(format!("{m} was answered after {frames} frames: the agent cursor did not act it out ({min})"));
                 }
                 v
+            } else if let Some(f) = s.get("script").and_then(Value::as_str) {
+                // A command script (`{"commands": [{command, params}]}`, path from the repository
+                // root) run through the engine, as `solvecraft-cli run` does.
+                let path = std::path::Path::new(env!("CARGO_MANIFEST_DIR")).join("../..").join(f);
+                let text = std::fs::read_to_string(&path).map_err(|e| format!("{f}: {e}"))?;
+                let v: Value = serde_json::from_str(&text).map_err(|e| format!("{f}: {e}"))?;
+                for (i, c) in v["commands"].as_array().into_iter().flatten().enumerate() {
+                    let r = self.call("engine.execute", json!({"command": c["command"], "params": c.get("params").cloned().unwrap_or(json!({}))}));
+                    if r["ok"] != true {
+                        return Err(format!("{f}: step {} ({}): {}", i + 1, c["command"], r["error"]));
+                    }
+                }
+                self.frames(2);
+                return Ok(());
             } else if let Some(m) = s.get("call").and_then(Value::as_str) {
-                self.call(m, s.get("params").cloned().unwrap_or(json!({})))
+                // "$DIR" in a string parameter is the scenario's folder.
+                let params = with_dir(s.get("params").cloned().unwrap_or(json!({})), &self.dir.to_string_lossy());
+                self.call(m, params)
             } else if s.get("note").is_some() || s.get("pending").is_some() {
                 return Ok(());
             } else if let Some(name) = s.get("shot").and_then(Value::as_str) {

crates/ui-egui/tests/scenarios/acceptance_lid_lip_after_resize.json

@@ -0,0 +1,27 @@
+[
+ {
+  "pending": "#40: offsets of projected geometry get new ids on recompute, the lid's lip fails"
+ },
+ {
+  "note": "Acceptance (#27): the board grows 60 \u2192 70 mm; the lid's lip (offsets of the case's projected rim) follows."
+ },
+ {
+  "script": "examples/acceptance/sensor_enclosure.json"
+ },
+ {
+  "call": "engine.execute",
+  "params": {
+   "command": "parameters.change",
+   "params": {
+    "name": "board_w",
+    "expression": "70 mm"
+   }
+  }
+ },
+ {
+  "expect": {
+   "errors": 0,
+   "bodies": 2
+  }
+ }
+]

crates/ui-egui/tests/scenarios/acceptance_lip_on_rounded_rim.json

@@ -0,0 +1,33 @@
+[
+ {
+  "pending": "#29: Plastic Lip fails on a rounded (filleted) shelled rim"
+ },
+ {
+  "note": "Acceptance (#27): a lip on the case's rounded rim with the Lip command."
+ },
+ {
+  "script": "examples/acceptance/sensor_enclosure.json"
+ },
+ {
+  "call": "engine.execute",
+  "params": {
+   "command": "plastic.lip",
+   "params": {
+    "face": [
+     0,
+     29,
+     25
+    ],
+    "width": 1,
+    "height": 1.5,
+    "body": "Case"
+   }
+  }
+ },
+ {
+  "expect": {
+   "errors": 0,
+   "bodies": 2
+  }
+ }
+]

crates/ui-egui/tests/scenarios/acceptance_pattern_of_suppressed_feature.json

@@ -0,0 +1,29 @@
+[
+ {
+  "pending": "#42: suppressing a patterned feature keeps the pattern's copies"
+ },
+ {
+  "note": "Acceptance (#27): suppressing the PCB standoff takes the patterned copies with it."
+ },
+ {
+  "script": "examples/acceptance/sensor_enclosure.json"
+ },
+ {
+  "call": "engine.execute",
+  "params": {
+   "command": "timeline.suppress",
+   "params": {
+    "feature": "Standoff",
+    "suppressed": true
+   }
+  }
+ },
+ {
+  "expect": {
+   "body_volume": {
+    "body": "Case",
+    "volume": 24934.4
+   }
+  }
+ }
+]

crates/ui-egui/tests/scenarios/acceptance_sensor_enclosure.json

@@ -0,0 +1,145 @@
+[
+ {
+  "note": "Acceptance (#27): the sensor enclosure built from examples/acceptance/sensor_enclosure.json, then edited: the USB cut-out moved, the height changed, features suppressed and back, saved and reopened, exported to STEP and read back."
+ },
+ {
+  "script": "examples/acceptance/sensor_enclosure.json"
+ },
+ {
+  "call": "ui.view",
+  "params": {
+   "view": "home"
+  }
+ },
+ {
+  "expect": {
+   "bodies": 2,
+   "errors": 0,
+   "body_volume": {
+    "body": "Case",
+    "volume": 25401.7
+   }
+  }
+ },
+ {
+  "expect": {
+   "body_volume": {
+    "body": "Lid",
+    "volume": 19629.7
+   }
+  }
+ },
+ {
+  "call": "engine.execute",
+  "params": {
+   "command": "parameters.change",
+   "params": {
+    "name": "usb_offset",
+    "expression": "15 mm"
+   }
+  }
+ },
+ {
+  "expect": {
+   "errors": 0,
+   "bodies": 2,
+   "body_volume": {
+    "body": "Case",
+    "volume": 25401.7
+   }
+  }
+ },
+ {
+  "call": "engine.execute",
+  "params": {
+   "command": "timeline.suppress",
+   "params": {
+    "feature": "SnapFit1",
+    "suppressed": true
+   }
+  }
+ },
+ {
+  "expect": {
+   "errors": 0,
+   "body_volume": {
+    "body": "Case",
+    "volume": 25340.5
+   }
+  }
+ },
+ {
+  "call": "engine.execute",
+  "params": {
+   "command": "timeline.suppress",
+   "params": {
+    "feature": "SnapFit1",
+    "suppressed": false
+   }
+  }
+ },
+ {
+  "expect": {
+   "errors": 0,
+   "body_volume": {
+    "body": "Case",
+    "volume": 25401.7
+   }
+  }
+ },
+ {
+  "call": "engine.execute",
+  "params": {
+   "command": "file.save_as",
+   "params": {
+    "path": "$DIR/enclosure.solvecraft"
+   }
+  }
+ },
+ {
+  "call": "engine.execute",
+  "params": {
+   "command": "doc.open",
+   "params": {
+    "path": "$DIR/enclosure.solvecraft"
+   }
+  }
+ },
+ {
+  "expect": {
+   "errors": 0,
+   "bodies": 2,
+   "body_volume": {
+    "body": "Case",
+    "volume": 25401.7
+   }
+  }
+ },
+ {
+  "call": "engine.execute",
+  "params": {
+   "command": "file.export",
+   "params": {
+    "path": "$DIR/enclosure.step"
+   }
+  }
+ },
+ {
+  "call": "engine.execute",
+  "params": {
+   "command": "doc.open",
+   "params": {
+    "path": "$DIR/enclosure.step"
+   }
+  }
+ },
+ {
+  "expect": {
+   "bodies": 2,
+   "body_volume": {
+    "body": "Case",
+    "volume": 25401.7
+   }
+  }
+ }
+]

crates/ui-egui/tests/scenarios/acceptance_snap_fit_after_resize.json

@@ -0,0 +1,44 @@
+[
+ {
+  "pending": "#41: a snap fit stays at its old point when its wall moves (a floating body)"
+ },
+ {
+  "note": "Acceptance (#27): the board grows 40 \u2192 50 mm deep; the snap fit stays on the moved front wall."
+ },
+ {
+  "script": "examples/acceptance/sensor_enclosure.json"
+ },
+ {
+  "call": "engine.execute",
+  "params": {
+   "command": "parameters.change",
+   "params": {
+    "name": "board_d",
+    "expression": "50 mm"
+   }
+  }
+ },
+ {
+  "expect": {
+   "errors": 0,
+   "bodies": 2
+  }
+ },
+ {
+  "expect": {
+   "bbox": {
+    "body": "Case",
+    "min": [
+     -40,
+     -35,
+     0
+    ],
+    "max": [
+     40,
+     35,
+     25
+    ]
+   }
+  }
+ }
+]