1b-agent/OneCAD
1
0 Fork 0
forked from 1b-agent/solidcraft-upstream
Code Pull Requests Activity

Sketch commands return the ids of the points, curves, constraints and dimensions they create as created: {points, curves, constraints, dimensions}, worked out in Session::execute from the sketch before and after, so a script can dimension and constrain new geometry right away; ids stay stable and are not reused after a delete (undo rewinds the counters with the design). The MCP execute tool describes the field

Browse Source
This commit is contained in:
CypherNaugh_0x committed 2026-10-11 12:23:57 +02:00
1 parent 22672585c9
commit cc22672041
12 files changed
+510 -121
Download Patch File Download Diff File Expand all files Collapse all files

No files matched your search

crates/engine/src/cmd/sketch_modify.rs
+11 -11
View File
@@ -17,34 +17,34 @@ pub static COMMANDS: &[CommandSpec] = &[
.at("SKETCH", "MODIFY")
.icon("sketch_fillet")
.enabled(in_sketch)
.params("point: corner shared by two curves (\"l1.end\") | points: [corners] (all rounded alike: one radius, the rest equal) | a, b: two lines or arcs meeting at a corner; radius: expr"),
.params(concat!("point: corner shared by two curves (\"l1.end\") | points: [corners] (all rounded alike: one radius, the rest equal) | a, b: two lines or arcs meeting at a corner; radius: expr", created_doc!())),
CommandSpec::new("sketch.chamfer.equal_distance", "Equal Distance Chamfer", chamfer_equal)
.at("SKETCH", "MODIFY")
.icon("sketch_chamfer")
.enabled(in_sketch)
.params("point | a, b: a corner of two lines; distance"),
.params(concat!("point | a, b: a corner of two lines; distance", created_doc!())),
CommandSpec::new("sketch.chamfer.distance_angle", "Distance and Angle Chamfer", chamfer_dist_angle)
.at("SKETCH", "MODIFY")
.icon("sketch_chamfer")
.enabled(in_sketch)
.params("point | a, b: a corner of two lines; distance: along a, angle: deg from a"),
.params(concat!("point | a, b: a corner of two lines; distance: along a, angle: deg from a", created_doc!())),
CommandSpec::new("sketch.chamfer.two_distance", "Two Distance Chamfer", chamfer_two)
.at("SKETCH", "MODIFY")
.icon("sketch_chamfer")
.enabled(in_sketch)
.params("point | a, b: a corner of two lines; distance: along a, distance2: along b"),
.params(concat!("point | a, b: a corner of two lines; distance: along a, distance2: along b", created_doc!())),
CommandSpec::new("sketch.offset", "Offset", offset)
.at("SKETCH", "MODIFY")
.icon("offset")
.key("O")
.enabled(in_sketch)
.params("curves: [ids], distance: number (positive = left of the chain, or toward `side`), side?: [x,y], chain?: bool (default true: the connected chain)"),
.params(concat!("curves: [ids], distance: number (positive = left of the chain, or toward `side`), side?: [x,y], chain?: bool (default true: the connected chain)", created_doc!())),
CommandSpec::new("sketch.trim", "Trim", trim)
.at("SKETCH", "MODIFY")
.icon("trim")
.key("T")
.enabled(in_sketch)
.params("curve: id, at: [x,y] (the piece to remove: between the nearest intersections around it)"),
.params(concat!("curve: id, at: [x,y] (the piece to remove: between the nearest intersections around it)", created_doc!())),
CommandSpec::new("sketch.extend", "Extend", extend)
.at("SKETCH", "MODIFY")
.icon("extend")
@@ -54,7 +54,7 @@ pub static COMMANDS: &[CommandSpec] = &[
.at("SKETCH", "MODIFY")
.icon("break")
.enabled(in_sketch)
.params("curve: id, at: [x,y] (split at the nearest intersections around it) | params: split at points: [[x,y]…]"),
.params(concat!("curve: id, at: [x,y] (split at the nearest intersections around it) | params: split at points: [[x,y]…]", created_doc!())),
CommandSpec::new("sketch.scale", "Sketch Scale", scale)
.at("SKETCH", "MODIFY")
.icon("scale")
@@ -62,22 +62,22 @@ pub static COMMANDS: &[CommandSpec] = &[
.params("entities: [curve/point ids], base: [x,y] or point ref, factor: number"),
CommandSpec::new("sketch.move", "Move/Copy Sketch Entities", move_copy)
.enabled(in_sketch)
.params("entities: [ids], translate?: [dx,dy], angle?: deg, center?: [x,y], copy?: bool"),
.params(concat!("entities: [ids], translate?: [dx,dy], angle?: deg, center?: [x,y], copy?: bool", created_doc!())),
CommandSpec::new("sketch.mirror", "Mirror", mirror)
.at("SKETCH", "CREATE")
.icon("sketch_mirror")
.enabled(in_sketch)
.params("entities: [curve/point ids], line: mirror line id (symmetry constraints are added)"),
.params(concat!("entities: [curve/point ids], line: mirror line id (symmetry constraints are added)", created_doc!())),
CommandSpec::new("sketch.pattern.circular", "Circular Pattern", pattern_circular)
.at("SKETCH", "CREATE")
.icon("sketch_circ_pattern")
.enabled(in_sketch)
.params("entities: [ids], center: [x,y] or point ref, count: 2…500, angle?: total deg (default 360)"),
.params(concat!("entities: [ids], center: [x,y] or point ref, count: 2…500, angle?: total deg (default 360)", created_doc!())),
CommandSpec::new("sketch.pattern.rectangular", "Rectangular Pattern", pattern_rect)
.at("SKETCH", "CREATE")
.icon("sketch_rect_pattern")
.enabled(in_sketch)
.params("entities: [ids], dir?: [x,y] (default x), count, spacing; count2?, spacing2? (perpendicular direction)"),
.params(concat!("entities: [ids], dir?: [x,y] (default x), count, spacing; count2?, spacing2? (perpendicular direction)", created_doc!())),
];
const TOL: f64 = 1e-7;