Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

The old ids live only in crates/engine/src/legacy_ids.rs (the legacy migration table): find_command maps them, so old scripts, recipes and control calls keep working, and saved shortcuts, recent and pinned commands are migrated on load (designs store no command ids). Parity maps the observed catalog ids to ours through xtask/data/fusion-ids.tsv. The agent rule now reads: our own dotted id, never another product's. Cargo.toml's repository points at github.com/bherbruck/solvecraft.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

apps/solvecraft-cli/tests/corpus/scripts/components-arm.json

@@ -1,15 +1,15 @@
 {"commands": [
- {"command": "PrimitiveBox", "params": {"length": 10, "width": 10, "height": 10, "body_name": "Base"}},
- {"command": "FusionCreateNewComponentCommand", "params": {"name": "Arm"}},
- {"command": "PrimitiveBox", "params": {"corner": [20, 0, 0], "length": 10, "width": 4, "height": 4, "body_name": "ArmBody"}},
- {"command": "FusionFilletEdgesCommand", "params": {"edges": [[25, 4, 4]], "radius": 1}},
+ {"command": "solid.box", "params": {"length": 10, "width": 10, "height": 10, "body_name": "Base"}},
+ {"command": "component.create", "params": {"name": "Arm"}},
+ {"command": "solid.box", "params": {"corner": [20, 0, 0], "length": 10, "width": 4, "height": 4, "body_name": "ArmBody"}},
+ {"command": "solid.fillet", "params": {"edges": [[25, 4, 4]], "radius": 1}},
  {"command": "component.activate", "params": {"component": 0}},
  {"command": "occurrence.move", "params": {"occurrence": 3, "translate": [0, 50, 0]}},
  {"command": "occurrence.copy", "params": {"component": "Arm", "translate": [0, 20, 0]}},
  {"command": "component.paste_new", "params": {"component": "Arm", "translate": [0, -30, 0]}},
  {"command": "occurrence.ground", "params": {"occurrence": 3}},
- {"command": "SketchCreate", "params": {"plane": "XY", "name": "S1"}},
- {"command": "CircleCenterRadius", "params": {"center": [5, 5], "radius": 2}},
- {"command": "SketchStop", "params": {}},
- {"command": "Extrude", "params": {"distance": 10, "operation": "cut"}}
+ {"command": "sketch.create", "params": {"plane": "XY", "name": "S1"}},
+ {"command": "sketch.circle.center", "params": {"center": [5, 5], "radius": 2}},
+ {"command": "sketch.finish", "params": {}},
+ {"command": "solid.extrude", "params": {"distance": 10, "operation": "cut"}}
 ]}

apps/solvecraft-cli/tests/corpus/scripts/joints-hinge.json

@@ -1,14 +1,14 @@
 {"commands": [
- {"command": "ChangeParameterCommand", "params": {"name": "open_angle", "expression": "90 deg"}},
- {"command": "FusionCreateNewComponentCommand", "params": {"name": "LeafA"}},
- {"command": "PrimitiveBox", "params": {"length": 40, "width": 30, "height": 3, "corner": [0, 0, 0]}},
- {"command": "PrimitiveCylinder", "params": {"base": [0, 33, 4], "axis": [1, 0, 0], "radius": 4, "height": 40, "operation": "new"}},
+ {"command": "parameters.change", "params": {"name": "open_angle", "expression": "90 deg"}},
+ {"command": "component.create", "params": {"name": "LeafA"}},
+ {"command": "solid.box", "params": {"length": 40, "width": 30, "height": 3, "corner": [0, 0, 0]}},
+ {"command": "solid.cylinder", "params": {"base": [0, 33, 4], "axis": [1, 0, 0], "radius": 4, "height": 40, "operation": "new"}},
  {"command": "component.activate", "params": {"component": "root"}},
- {"command": "FusionCreateNewComponentCommand", "params": {"name": "LeafB"}},
- {"command": "PrimitiveBox", "params": {"length": 40, "width": 30, "height": 3, "corner": [0, 0, 0]}},
- {"command": "PrimitiveCylinder", "params": {"base": [0, 33, 4], "axis": [1, 0, 0], "radius": 4, "height": 40, "operation": "new"}},
+ {"command": "component.create", "params": {"name": "LeafB"}},
+ {"command": "solid.box", "params": {"length": 40, "width": 30, "height": 3, "corner": [0, 0, 0]}},
+ {"command": "solid.cylinder", "params": {"base": [0, 33, 4], "axis": [1, 0, 0], "radius": 4, "height": 40, "operation": "new"}},
  {"command": "component.activate", "params": {"component": "root"}},
  {"command": "occurrence.ground", "params": {"occurrence": 2, "grounded": true}},
- {"command": "JointAssembleCmdNew", "params": {"type": "revolute", "a": {"occurrence": "LeafA", "circle": [1, 37, 4]}, "b": {"occurrence": "LeafB", "circle": [1, 37, 4]}, "name": "Hinge"}},
- {"command": "FusionMoveJointsCommand", "params": {"joint": "Hinge", "value": "open_angle"}}
+ {"command": "joint.create", "params": {"type": "revolute", "a": {"occurrence": "LeafA", "circle": [1, 37, 4]}, "b": {"occurrence": "LeafB", "circle": [1, 37, 4]}, "name": "Hinge"}},
+ {"command": "joint.drive", "params": {"joint": "Hinge", "value": "open_angle"}}
 ]}

apps/solvecraft-cli/tests/corpus/scripts/m0-box-fillet-hole.json

@@ -1,12 +1,12 @@
 {"commands": [
- {"command": "ChangeParameterCommand", "params": {"name": "width", "expression": "40 mm"}},
- {"command": "SketchCreate", "params": {"plane": "XY"}},
- {"command": "ShapeRectangleTwoPoint", "params": {"p0": [0, 0], "p1": [40, 30]}},
- {"command": "SketchStop", "params": {}},
- {"command": "Extrude", "params": {"distance": "width / 2"}},
- {"command": "FusionFilletEdgesCommand", "params": {"edges": [[0, 0, 10]], "radius": 3}},
- {"command": "SketchCreate", "params": {"plane": "XY"}},
- {"command": "CircleCenterRadius", "params": {"center": [20, 15], "radius": 5}},
- {"command": "SketchStop", "params": {}},
- {"command": "Extrude", "params": {"distance": 20, "operation": "cut"}}
+ {"command": "parameters.change", "params": {"name": "width", "expression": "40 mm"}},
+ {"command": "sketch.create", "params": {"plane": "XY"}},
+ {"command": "sketch.rectangle.two_point", "params": {"p0": [0, 0], "p1": [40, 30]}},
+ {"command": "sketch.finish", "params": {}},
+ {"command": "solid.extrude", "params": {"distance": "width / 2"}},
+ {"command": "solid.fillet", "params": {"edges": [[0, 0, 10]], "radius": 3}},
+ {"command": "sketch.create", "params": {"plane": "XY"}},
+ {"command": "sketch.circle.center", "params": {"center": [20, 15], "radius": 5}},
+ {"command": "sketch.finish", "params": {}},
+ {"command": "solid.extrude", "params": {"distance": 20, "operation": "cut"}}
 ]}

apps/solvecraft-cli/tests/corpus/scripts/m0-revolve-primitives.json

@@ -1,11 +1,11 @@
 {"commands": [
- {"command": "SketchCreate", "params": {"plane": "XZ"}},
- {"command": "DrawPolyline", "params": {"points": [[10, 0], [15, 0], [15, 5], [10, 5]], "closed": true}},
- {"command": "SketchStop", "params": {}},
- {"command": "Revolve", "params": {"axis": "y"}},
- {"command": "PrimitiveBox", "params": {"length": 10, "width": 10, "height": 10, "corner": [30, 0, 0]}},
- {"command": "PrimitiveCylinder", "params": {"diameter": 4, "height": 20, "base": [35, 5, -5]}},
- {"command": "FusionCombineCommand", "params": {"target": "Body2", "tools": ["Body3"], "operation": "cut"}},
- {"command": "FusionChamferCommand", "params": {"edges": [[30, 5, 10]], "distance": 1}},
+ {"command": "sketch.create", "params": {"plane": "XZ"}},
+ {"command": "sketch.line", "params": {"points": [[10, 0], [15, 0], [15, 5], [10, 5]], "closed": true}},
+ {"command": "sketch.finish", "params": {}},
+ {"command": "solid.revolve", "params": {"axis": "y"}},
+ {"command": "solid.box", "params": {"length": 10, "width": 10, "height": 10, "corner": [30, 0, 0]}},
+ {"command": "solid.cylinder", "params": {"diameter": 4, "height": 20, "base": [35, 5, -5]}},
+ {"command": "solid.combine", "params": {"target": "Body2", "tools": ["Body3"], "operation": "cut"}},
+ {"command": "solid.chamfer", "params": {"edges": [[30, 5, 10]], "distance": 1}},
  {"command": "timeline.edit", "params": {"feature": "Revolve1", "set": {"angle": "180 deg"}}}
 ]}

apps/solvecraft-cli/tests/corpus/scripts/modern-path-pattern.json

@@ -1,14 +1,14 @@
 {
   "commands": [
     {
-      "command": "SketchCreate",
+      "command": "sketch.create",
       "params": {
         "name": "Plate_sketch",
         "plane": "XY"
       }
     },
     {
-      "command": "DrawPolyline",
+      "command": "sketch.line",
       "params": {
         "construction": false,
         "ids": [
@@ -27,7 +27,7 @@
       }
     },
     {
-      "command": "DrawPolyline",
+      "command": "sketch.line",
       "params": {
         "construction": false,
         "ids": [
@@ -43,7 +43,7 @@
       }
     },
     {
-      "command": "DrawPolyline",
+      "command": "sketch.line",
       "params": {
         "construction": false,
         "ids": [
@@ -59,7 +59,7 @@
       }
     },
     {
-      "command": "DrawPolyline",
+      "command": "sketch.line",
       "params": {
         "construction": false,
         "ids": [
@@ -72,11 +72,11 @@
       }
     },
     {
-      "command": "SketchStop",
+      "command": "sketch.finish",
       "params": {}
     },
     {
-      "command": "Extrude",
+      "command": "solid.extrude",
       "params": {
         "body_names": [
           "Plate"
@@ -110,14 +110,14 @@
       }
     },
     {
-      "command": "SketchCreate",
+      "command": "sketch.create",
       "params": {
         "name": "PathSketch",
         "plane": "XY"
       }
     },
     {
-      "command": "ArcThreePoint",
+      "command": "sketch.arc.three_point",
       "params": {
         "end": [
           20,
@@ -135,7 +135,7 @@
       }
     },
     {
-      "command": "CircleCenterRadius",
+      "command": "sketch.circle.center",
       "params": {
         "center": "a1.start",
         "construction": false,
@@ -144,11 +144,11 @@
       }
     },
     {
-      "command": "SketchStop",
+      "command": "sketch.finish",
       "params": {}
     },
     {
-      "command": "Extrude",
+      "command": "solid.extrude",
       "params": {
         "body_names": [
           "Plate"
@@ -179,7 +179,7 @@
       }
     },
     {
-      "command": "PatternOnPath",
+      "command": "solid.pattern.path",
       "params": {
         "count": 7,
         "features": [

apps/solvecraft-cli/tests/corpus/scripts/modern-plastic.json

@@ -1,10 +1,10 @@
 {"commands": [
- {"command": "ChangeParameterCommand", "params": {"name": "wall", "expression": "2 mm"}},
- {"command": "PrimitiveBox", "params": {"length": 80, "width": 50, "height": 30}},
- {"command": "FusionShellBodyCommand", "params": {"faces": [[40, 25, 30]], "thickness": "wall"}},
- {"command": "FusionLipCommand", "params": {"face": [1, 25, 30], "width": 1, "height": 2}},
- {"command": "FusionBossCommand", "params": {"position": [20, 20, 2], "diameter": 6, "height": 10, "hole_diameter": 2.5, "draft": "1 deg"}},
- {"command": "FusionRestCommand", "params": {"position": [60, 30, 2], "width": 8, "length": 12, "height": 3, "thickness": 1}},
- {"command": "FusionSnapFitCommand", "params": {"position": [40, 12, 2], "direction": [0, 0, 1], "hook": [0, 1, 0], "length": 12, "thickness": 1.5, "width": 6, "catch_depth": 1, "catch_length": 2}},
- {"command": "FusionManagePlasticRuleCommand", "params": {"name": "ABS (1.5mm)", "active": true}}
+ {"command": "parameters.change", "params": {"name": "wall", "expression": "2 mm"}},
+ {"command": "solid.box", "params": {"length": 80, "width": 50, "height": 30}},
+ {"command": "solid.shell", "params": {"faces": [[40, 25, 30]], "thickness": "wall"}},
+ {"command": "plastic.lip", "params": {"face": [1, 25, 30], "width": 1, "height": 2}},
+ {"command": "plastic.boss", "params": {"position": [20, 20, 2], "diameter": 6, "height": 10, "hole_diameter": 2.5, "draft": "1 deg"}},
+ {"command": "plastic.rest", "params": {"position": [60, 30, 2], "width": 8, "length": 12, "height": 3, "thickness": 1}},
+ {"command": "plastic.snap_fit", "params": {"position": [40, 12, 2], "direction": [0, 0, 1], "hook": [0, 1, 0], "length": 12, "thickness": 1.5, "width": 6, "catch_depth": 1, "catch_length": 2}},
+ {"command": "plastic.manage_rules", "params": {"name": "ABS (1.5mm)", "active": true}}
 ]}

apps/solvecraft-cli/tests/corpus/scripts/modern-sheet-metal.json

@@ -1,7 +1,7 @@
 {
   "commands": [
     {
-      "command": "SketchCreate",
+      "command": "sketch.create",
       "params": {
         "name": "Contour",
         "plane": {
@@ -24,7 +24,7 @@
       }
     },
     {
-      "command": "DrawPolyline",
+      "command": "sketch.line",
       "params": {
         "construction": false,
         "ids": [
@@ -43,7 +43,7 @@
       }
     },
     {
-      "command": "DrawPolyline",
+      "command": "sketch.line",
       "params": {
         "construction": false,
         "ids": [
@@ -59,7 +59,7 @@
       }
     },
     {
-      "command": "DrawPolyline",
+      "command": "sketch.line",
       "params": {
         "construction": false,
         "ids": [
@@ -75,11 +75,11 @@
       }
     },
     {
-      "command": "SketchStop",
+      "command": "sketch.finish",
       "params": {}
     },
     {
-      "command": "FusionSheetMetalFlangeCommand",
+      "command": "sheet.flange",
       "params": {
         "curves": [
           "l1",