1b-agent/OneCAD
1
0 Fork 0
forked from 1b-agent/solidcraft-upstream
Code Pull Requests Activity
457 Commits 16 Branches 33 Tags
07932d0f42d65097f583aa69df496b59a54fd908
Commit Graph
80 Commits
Author SHA1 Message Date
bherbruck 07932d0f42 feat: preserve modeling intent across sketches, assemblies, and fabrication 
Persist typed sketch dimensions and bounded ordered configuration rules in format 8. Use exact occurrence paths and source identity for editing, movement, appearance, and mass. Preserve sheet material regions through cutting, folding, and exact DXF export; retain nested cavities and material islands.

Validation: cargo xtask ci passed, including 368 engine tests, 178 UI tests, 68 UI scenarios, 136 kernel tests, and the 10-crate wasm check. Actual preview workflows and legacy format-7 origin-corner reopening were inspected.
 2026-10-11 01:28:01 -04:00
CypherNaugh_0x 5275911b44 Highlight modifier faces from timeline hover and selection 2026-10-11 01:59:02 +02:00
bherbruckN3MI-DGClaude Opus 5.5
 		95ae096265 Restore minimal view-cube turns and drag-to-orbit 
Recover N3MI-DG's TOP/BOTTOM heading and drag-to-orbit contributions
from PR #101, adapted to the existing 14-target cube. Add Y-up/Z-up
regressions, navigation ownership and dialog blocking coverage.

Original heading commit: c28e780f52
Original orbit commit: f30b30be6e
Source: https://github.com/bherbruck/solvecraft/pull/101

Co-authored-by: N3MI-DG <david1985gray@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
 2026-10-10 19:50:31 -04:00
N3MI-DGandClaude Opus 5.5 ff1453f868 View cube face labels are larger: one font size for all six, the widest (BOTTOM) spanning 90% of its face, instead of a fixed 9.5 px that left the names small on the cube. Tests: BOTTOM spans 90% of the face seen straight on, and every label stays within its face from any direction 
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
 2026-10-11 10:06:05 +11:00
bherbruck 63fd838f55 Fix hover highlight flicker during viewport navigation 
Resolve hover before rendering and suppress it throughout navigation gestures and animated views. Closes #92.
 2026-10-10 18:14:53 -04:00
bherbruck 6f16b31771 Fix viewport input leaking through dialogs 
Use egui pointer ownership for viewport navigation and picking, view-cube
interaction, and sketch-dimension hover. Cover scrolling, model selection,
and cube interaction under floating dialogs, including after they close.
Shield constraint glyph and move-gizmo highlights from overlapping UI too.

Clear strict Clippy warnings and use the same saved path in the recent-file
scenario on Windows and Unix.

Fixes #87
 2026-10-10 17:34:14 -04:00
bherbruck acf4669f73 fix: select complete circular rims and curved surfaces in 3D 
Group kernel pieces across circular rims and hidden surface seams for hovering, selection, dialogs, and measurement. Preserve physical references and cover full-item toggling and picking with regression tests.

Fixes #88
 2026-10-10 17:13:36 -04:00
bherbruck d6cdec40da Fix modelling regressions and reconcile WIP UI work 2026-10-10 15:37:00 -04:00
CypherNaugh_0x 81be4e74b8 browser.visibility hides and shows sketches, bodies, construction geometry and origin items (items: ids or names, or a whole folder; visible: bool), so agents can hide helper sketches over MCP. What is hidden moved from the egui UI state into the engine session (view state: not saved, not an undo step); the desktop eye toggles and menus use it, headless renders and fit leave hidden items out, and document.inspect, sketch.inspect and ui.inspect report visibility. ui.set still accepts hiddenBodies, hiddenOrigin, hiddenSketches and shownSketches. Tests: helper sketches hide and show in the engine (hostile input changes nothing) and through MCP only 2026-10-10 14:33:56 -04:00
CypherNaugh_0x b5fd55cce6 Section Analysis cut faces hide the inside of the body: the cap was drawn on the far walls' back faces at their own depth, so every edge between the cut and the far wall (hole and boss edges, corner seams) showed through it like a pane of glass. While a section is shown the solids mark in the stencil where the cap is the visible surface, then draw the cap again there at the depth where the view ray meets the section plane (orthographic and perspective), so holes stay open and the inside is hidden. The native app asks for an 8-bit stencil; without one (eframe's web painter has none) the cap draws as before. Not covered by an automated test (no GPU in the test suite); checked in the app with before/after screenshots 2026-10-10 13:51:00 -04:00
CypherNaugh_0x aa268f0f0e Faster tests: hostile_params_never_panic shares its commands across threads (154 s to 20 s), the design-file fuzz test tries its seeded cases on all cores (21 s to 7.5 s), the kernel's tangent-primitive boolean test runs its three seeds at once, and the headless scenario harness skips the software viewport render it threw away every frame (scenarios 63 s to 26 s). kill_mid_save waits for the saver to reach a varying round instead of sleeping a fixed time, so it holds on a busy machine 2026-10-10 13:24:08 -04:00
bherbruckandClaude Opus 5.5 c90070c497 Agent cursor speed: a slider from 1× to 5× with Instant at the far right. Instant no longer breaks: the command runs at once (as with the cursor off) and the pointer jumps to where it acted, with a click ripple. ui.agent_cursor speed takes 1–5 or "instant"; saved "slow" and "normal" read as 1×. Scenario covers 1×, 3× and Instant against the cursor-off result 
Fixes #79

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01RjGw4gA5ZvKrU8MQP6sBgT
 2026-10-10 16:56:30 +00:00
David GrayandClaude Opus 5.5 d57e90a32a View cube labels are printed on their faces: each face's name is laid out flat and mapped through the cube's projection, so it turns and foreshortens with the face and fades out as the face turns edge-on (instead of floating upright at the face's centre and vanishing past 70 degrees). TOP and BOTTOM read upright in the plan views clicking them turns to. Tests: every label reads upright in its own view and stays within its face from every direction 
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
 2026-10-10 11:01:31 -04:00
David GrayandClaude Opus 5.5 03790f5509 View cube, move triad plane squares and the Offset Plane preview no longer flash lines while orbiting: faces turned nearly edge-on are drawn with projected_polygon (an unfeathered fill, outlined edge by edge) instead of egui's convex_polygon, whose miter joins shot spikes hundreds of pixels long at the slivers' sharp ends. Tests check everything drawn stays within each shape from 4050 view directions 
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
 2026-10-10 20:28:08 +11:00
bherbruckandClaude Opus 5.5 535bd5dfff Section Analysis visuals: the cut faces are hatched at 45 degrees in the cap colour, and each body's outline along the cut is drawn 
Part of #51 (per-body cap colours and the cut in snapshots to follow)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01RjGw4gA5ZvKrU8MQP6sBgT
 2026-10-10 07:11:40 +00:00
bherbruckandClaude Opus 5.5 9dd901649c View cube with Y up (#3): the cube is drawn and clicked in the camera's up-axis frame, so TOP is the world's up; TOP and BOTTOM turn to the standard plan views (yaw 0). Scenario view_cube_y_up; the camera check can test the world direction the camera looks from 
Refs #15, #3

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01RjGw4gA5ZvKrU8MQP6sBgT
 2026-10-10 06:55:10 +00:00
bherbruckandClaude Opus 5.5 7318b98b8d Preferences: one Fusion-style dialog from the gear at the top right and Ctrl+, (Cmd+,) 
Pages: General (theme Dark/Light/System, UI scale, units of new designs, autosave, display
precision, the agent cursor), Navigation (Fusion, SolidWorks, Inventor, Alias and Tinkercad
mouse presets, reverse zoom, zoom to the cursor, orbit centre, view-change animation on/off and
speed), Keyboard Shortcuts (the old Shortcuts window as a page: search, rebind, conflicts),
Design (default modelling orientation Y up / Z up for #3, and the offer to stand up a Y-up STEP
or IGES file: a quarter turn about X as one undoable Move), Graphics, Sketch, Selection.
Changes apply at once; Cancel or Esc puts back what was there when the dialog opened, Apply
keeps them, OK closes, Restore Defaults resets the page. The theme, ground shadow and agent
cursor settings are now kept between runs. File and Help › Keyboard Shortcuts open the page;
the unused docked Preferences dialog is gone. Control: ui.prefs {open, button, stand_up, …}.
Scenario s45_preferences; tests for Cancel/Apply/defaults and standing a Y-up file up.

Fixes #36

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01RjGw4gA5ZvKrU8MQP6sBgT
 2026-10-10 05:09:03 +00:00
bherbruckandClaude Opus 5.5 a5729f1f97 Constraint glyphs: one per constrained entity, beside it, readable 
Fixes #43

- Two-entity constraints (parallel, tangent, equal, ...) get a glyph on each entity.
- Glyphs sit beside their entity (offset along its screen normal), step along it when crowded,
  with a faint leader when pushed away; 15 px boxes with the toolbar's constraint icons
  (H/V stay letters), coloured from the theme's glyph tokens in both themes.
- Hovering a glyph lights both of its glyphs and its curves/points and names the constraint.
- Removes the old duplicate glyph drawer in viewport.rs (it drew a second, green set).
- Scenario expect key `glyphs` ({constraint id: count}, none overlapping) and the scenario
  constraint_glyphs_both_entities.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01RjGw4gA5ZvKrU8MQP6sBgT
 2026-10-10 03:27:42 +00:00
bherbruckandClaude Opus 5.5 1e5356e056 Selected and hovered edges, and a selected face's outline, show dimmed where the model hides them 
Fixes #50

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01RjGw4gA5ZvKrU8MQP6sBgT
 2026-10-10 00:51:37 +00:00
bherbruckandClaude Opus 5.5 ab574952b1 Hidden origin planes and axes are not pickable: Create Sketch only brings the Origin back when no body is shown; origin and construction planes give way to a face or profile at the same depth (a shelled box's floor where the XZ plane crosses it). Scenarios hidden_origin_planes_not_pickable and face_wins_over_origin_plane 
Fixes #31

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01RjGw4gA5ZvKrU8MQP6sBgT
 2026-10-10 00:14:00 +00:00
bherbruckandClaude Opus 5.5 5d69452db3 View cube: the axis triad is drawn behind the cube, so only its parts outside the cube show 
Refs #15

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01RjGw4gA5ZvKrU8MQP6sBgT
 2026-10-09 23:56:55 +00:00
bherbruckandClaude Opus 5.5 322a357dee Y-up worlds in the camera: an up axis on the camera (Z by default, or Y), with yaw and pitch measured about it; standard views, the home view, Look At, orbit, pan, the ground grid (XZ with Y up), the ground shadow and snapshots follow it. ui upAxis setting (app.set_up_axis re-aims and frames); cam.up_dir / to_frame / from_frame for the view cube and others 
Part of #3 (the camera half; the preference and import offer are shell's)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01RjGw4gA5ZvKrU8MQP6sBgT
 2026-10-09 23:49:12 +00:00
bherbruckandClaude Opus 5.5 0a1ab40ea0 View cube with chamfered corners: its only targets are the 6 faces (orthographic views) and the 8 corner facets (iso views); edges are not targets, a point on one goes to a neighbouring face or facet, and hover lights exactly the face or facet under the pointer. Design decision. 
Fixes #15

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
 2026-10-09 20:28:16 +00:00
bherbruckandClaude Opus 5.5 90fde44c32 Construction axes and points in the viewport: axes dashed in the construction colour across the model (past it either side), points as small stars; axes are picked like the origin axes and work as axes in dialogs (pattern directions, revolve, rotate); hidden like construction planes; timeline icons 
Fixes #16

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
 2026-10-09 19:07:19 +00:00
bherbruckandClaude Opus 5.5 cbdc4fe0d8 View cube hover lights the whole region a click turns to: a corner its 3 patches, an edge its 2 strips, a face its middle (one hit test for hover and click; test over all 26 regions). View animations ease with smoothstep and take longer for turns past a quarter turn, so no frame sweeps much more than 9 degrees; s38 and s39 enabled 
Fixes #15

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
 2026-10-09 18:45:27 +00:00
bherbruckandClaude Opus 5.5 50a74ac66d Agent cursor: a violet pointer labelled Agent acts out control-channel and MCP commands. It glides to the command's toolbar button (or its panel) and clicks with a ripple, then to each pick (faces, edges and points projected to the screen, sketch points, a new sketch's plane, the profiles an extrude takes), then the command runs; the reply waits for it and later requests queue behind. Speed instant/normal/slow; follow camera turns to a new sketch and back on finish. View settings on the navigation bar (Show Agent Cursor, speed, follow camera; remembered, off by default); ui.agent_cursor {show, speed, follow_camera}; "animate": false per call. Tests: pick to screen mapping; scenario with the cursor on (replies wait for the animation) matching the cursor-off result 
Fixes #35

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
 2026-10-09 18:21:47 +00:00
bherbruckandClaude Opus 5.5 d10312b7fd Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs 
The old ids live only in crates/engine/src/legacy_ids.rs (the legacy migration table): find_command maps them, so old scripts, recipes and control calls keep working, and saved shortcuts, recent and pinned commands are migrated on load (designs store no command ids). Parity maps the observed catalog ids to ours through xtask/data/fusion-ids.tsv. The agent rule now reads: our own dotted id, never another product's. Cargo.toml's repository points at github.com/bherbruck/solvecraft.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
 2026-10-09 12:17:23 +00:00
bherbruckandClaude Opus 5.5 305c1c9a9b Dragging sketch geometry snaps like Fusion: a dragged point (or a line dragged by its body, by its ends) snaps onto other points, line midpoints and curves, and letting go there adds the coincident, midpoint or point-on-curve constraint in the drag's undo step; it lines up horizontally and vertically with other points (dashed guides, no constraint). Snap distances in screen pixels; Ctrl or Alt held turns snapping off, also while drawing. Ring and Pt/Mid/On label on the snap. Scenario s42 (coincident and DOF, exact H alignment without a constraint, Ctrl-drag, undo, line body drag); ui.drag hold_end; synthetic drags keep their modifiers 
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-08 18:00:42 +00:00
bherbruckandClaude Opus 5.5 c45f3173fa QA targets for the newest UX reports (pending until their owners land): s37 browser chevrons on every node kind (all toggle; no Joints folder yet), s38 view animations to Top/Bottom end without a jump (the last frame turns 22.5 degrees today), s39 view cube edge/corner hover lights 2/3 patches, s40 toolbar Pin/Remove/reorder survive a restart and the workspace switcher spans the toolbar; ui_layout tests: every command dialog docked right at 260-380 px (or 480-560 for tables; the exploded view is 635), other windows fit on screen. Harness: published rects and counts, browser rows/fold arrows as handles, camera and view_anim steps, ui.at cube points, settings carried over a close restart, an adhoc scenario runner 
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-08 16:07:33 +00:00
bherbruckandClaude Opus 5.5 7a2eb059c4 Components are frames (user bug #4) 
What a component holds moves with its occurrence, and picks in the world land in the
component's frame:
- Sketches and construction planes show where their component is placed (free move, joint
  drive, Capture Position); sketch.inspect reports sketch points in the world.
- frames.rs maps a command's world picks into the frame of the body they lie on (through the
  inverse of its placement: a moved component or a pasted instance), points that make new
  geometry into the active component's frame, and directions with them; instance body names
  ("Body1 (Pin:2)") become the component's body. Fillet/chamfer edges, shell/offset/draft
  faces, face extrude/revolve, sketch on face, holes, sheet metal and plastic picks, primitives,
  appearance faces, analyses. Once per command (not again for commands run by commands); the
  active-frame fallback stays for commands without a table. Nothing changes while every
  placement is the identity.
- component.move_bodies keeps a body where it is in the world (Document.body_offsets: from the
  new component's frame to the one it was made in; renames and deleted components follow).
- The UI reads the placed model (Session::world_state) for display, picking, sketch editing and
  dialogs; live previews use it once anything is placed.
Tests (engine): sketches and construction planes move (and turn) with the component; world
picks fillet, sketch, hole and make boxes in a moved component; a pick on a pasted instance;
move_bodies keeps the world place there and back; a sketch on a face follows a Move feature.
QA's s34 now runs.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-08 15:04:32 +00:00
bherbruckandClaude Opus 5.5 8fa566af33 Continuous orbit (navigation bar): the view turns about the vertical until the next click or key 
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-08 14:14:29 +00:00
bherbruckandClaude Opus 5.5 1970b8c680 Viewport: a soft ground shadow under the model, seen from above (ui groundShadow, on by default) 
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-08 14:14:29 +00:00
bherbruckandClaude Opus 5.5 54c7690271 Viewport: silhouette outlines on curved surfaces (back faces pushed out on screen, drawn behind the model) in the styles with edges; new visual style Shaded with Hidden Edges (edges behind the model drawn faintly) 
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-08 14:14:29 +00:00
bherbruckandClaude Opus 5.5 aee1e941bf Camera: Fit (F6, navigation bar) frames the selection when there is one; the wheel zooms toward the model's surface under the cursor 
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-08 14:14:29 +00:00
bherbruckandClaude Opus 5.5 a3d187ccd1 Appearances in the viewport: per-face looks colour their faces, and see-through bodies and faces (opacity below 1) draw as glass: far sides first, then near sides, blended over the model 
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-08 14:14:29 +00:00
bherbruckandClaude Opus 5.5 c99e7e41ec Preferences window (File › Preferences): theme, units of new designs, recovery copies every N minutes (to a Recovery folder beside the preferences), mouse presets (Fusion, SolidWorks, Inventor), reverse zoom, orbit around the point under the cursor, grid, perspective, visual style, display precision, anti-aliasing (on restart), sketch and selection options; all kept between runs; ui.prefs control method 
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-08 12:09:31 +00:00
bherbruckandClaude Opus 5.5 a283e424d9 Appearances on faces, bodies and components (face > body > component > material > imported colour), with names and opacity and a built-in library of 20 (metals, ABS colours, glass, rubber, wood, paint); AppearanceCommand takes bodies, faces (points) or components, a library name or a colour with opacity, or nothing to clear; appearance.library, appearance.list (a body's resolved look and per-face colours); file format 3 turns the old body colour map into body appearances 
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-08 11:37:33 +00:00
bherbruckandClaude Opus 5.5 940c425316 Accessibility Analysis: faces a tool coming along a direction reaches (facing it, nothing above: a depth map of the model seen from that direction, tested per pixel on the GPU) shade green, the rest red; the analyses (zebra, draft, curvature map, environment map, accessibility, minimum radius, isocurves, curvature comb, center of mass) also on SOLID INSPECT, and Interference on sketch INSPECT; path patterns follow 3D sketch curves through the same path chain as sweeps (path_segments_3d folded into path_points) 
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-08 10:36:53 +00:00
bherbruckandClaude Opus 5.5 187e9a97b9 UI scenarios, batch 2: edit an early sketch from the timeline, components with a revolute joint driven to 90°, sheet metal base and edge flange to flat pattern and DXF, STEP export, new design and STEP insert with a hole on the imported face, parameters table drives the model, sketch constraints workflow (dimensions, delete and undo, fix, construction), rectangular pattern. Harness: widgets found by their text through the accessibility tree, file pickers answered from the scenario's folder, model renders at shot steps (SOLVECRAFT_SCENARIO_SHOTS), query/file checks; ui.at takes a dimension. Fix: a click on a sketch point under a dimension line (a diameter through the centre) selects the point; only the dimension's text takes precedence 
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-08 10:15:21 +00:00
bherbruckandClaude Opus 5.5 7a2b81fbf2 Environment Map Analysis: the model's faces as a mirror reflecting a studio (sky, horizon band, floor with light streaks, two light panels); toggles like the other surface analyses 
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-08 09:42:34 +00:00
bherbruckandClaude Opus 5.5 dea1f46266 Zebra, Draft and Curvature Map analyses (view state on the session, no undo step): the GPU shades the model's faces with reflected stripes, draft-angle bands to a pull direction (green, yellow within the angle, red) or a blue-green-red curvature map; the toolbar button toggles each 
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-08 09:42:34 +00:00
bherbruckandClaude Opus 5.5 f79b5c1045 Sweeps and pipes along 3D sketch curves (projected, intersection and included curves): a path that uses sketch wires is followed as one chain of points by a new kernel sweep_path (rotation-minimising frame; smooth B-spline walls per profile segment, or ruled walls mitred at sharp corners and for profiles with holes); 3D sketch curves can be picked as sweep paths 
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-08 09:42:34 +00:00
bherbruckandClaude Opus 5.5 3aacebdda4 Canvases in the 3D pass: textured quads depth-tested against the model (the model hides them, decals sit on their face), with the section cut applied; Canvas panel (opened after placing a canvas or by Edit Canvas in INSERT): opacity slider, width, angle, flip, visibility, delete 
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-08 09:42:34 +00:00
bherbruckandClaude Opus 5.5 2ac226cf0a Line tool inference like Fusion: parallel or perpendicular to existing lines, on a line's extension and tangent to circles and arcs, shown with a dashed guide and the snap label; placing the point adds the constraint (the existing curve stays, the new line follows) 
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-08 08:39:22 +00:00
bherbruckandClaude Opus 5.5 d40ef5bbdc 3D sketch: with 3D Sketch on, the Line, Spline and Point tools take points off the sketch plane, snapping to model vertices, edges and faces and to drawn 3D points (segments that stay on the plane are ordinary sketch lines); drawn 3D curves are wires with fit points (sketch.line3d, sketch.spline3d: centripetal Catmull-Rom, sketch.point3d), a clicked 3D point gets a move triad (drag along X/Y/Z or parallel to the sketch plane: sketch.move3d, joined ends move together), Delete removes it; sweep and pipe paths may mix 3D curves with sketch curves; control: ui.triad, ui.worldToScreen 
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-08 08:39:22 +00:00
bherbruckandClaude Opus 5.5 d2068e07a3 Selection inside sketches: double-click a curve selects the chain joined to it end to end (sketch.chain; shared or coincident ends), dimensions and constraint glyphs are selectable like other entities (Sel::SketchConstraint: Ctrl/Shift toggle, window and crossing boxes take them, Delete removes them with the rest), boxes leave out the origin, and the selection filter has sketch curves, points, dimensions and constraints 
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-08 08:39:22 +00:00
bherbruckandClaude Opus 5.5 ae4570ed39 Colours in exports from materials and appearances; Appearance command 
- Bodies export (STEP, 3MF) in the colour they are shown in: an appearance,
  else the physical material's look, else the colour the body was imported
  with (Document::body_color / painted). Physical materials used to export
  no colour at all.
- AppearanceCommand (Modify): a colour per body ("#rrggbb" or [r, g, b];
  null follows the material again), kept in the design and across renames.
- Material looks move to solvecraft-doc (material_color); the viewport draws
  appearance, material or imported colour, as exported.
- Engine test: brass and red ABS bodies export, re-import with their RGB, and
  keep it through open and export again.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-08 08:11:28 +00:00
bherbruckandClaude Opus 5.5 f6b42f8750 Sketch drag feel like Fusion (sketch.drag): the grabbed point goes exactly to the cursor, a line (spline, conic) slides with it, a circle or arc grabbed on its edge changes radius about its centre (an ellipse its minor radius), the centre moves the circle; the grabbed geometry is held while the rest moves as little as it can; fixed and fully constrained geometry stays. Dragging a curve of the sketch being edited now drags it (it used to start a box selection). Tests for per-entity fully-constrained feedback 
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-08 07:50:35 +00:00
bherbruckandClaude Opus 5.5 bbd0a19260 Sketch Palette, docked at the right while sketching: line type of the selected curves (normal, construction, centerline), Look At, and options kept with each sketch (sketch.options: Sketch Grid, Snap, Slice, Show Profile, Show Points, Show Dimensions, Show Constraints, Show Projected Geometries, 3D Sketch), the degrees of freedom, Finish Sketch. Slice cuts the model at the sketch plane; Snap off places points at the cursor 
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-08 07:50:35 +00:00
bherbruckandClaude Opus 5.5 a7f301bde6 Delete for everything: selection.delete removes sketch entities, features and sketches (with their dependents), construction planes, bodies (Remove feature), occurrences and components, and canvases in one undo step, with a dry run; Delete/Backspace and every menu's Delete go through it and ask first, listing what goes with it and what would fail; faces say Delete Face is not available yet; ui.confirm control method 
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-08 06:44:11 +00:00