 bherbruckandClaude Opus 5.5
|
f6b42f8750
|
Sketch drag feel like Fusion (sketch.drag): the grabbed point goes exactly to the cursor, a line (spline, conic) slides with it, a circle or arc grabbed on its edge changes radius about its centre (an ellipse its minor radius), the centre moves the circle; the grabbed geometry is held while the rest moves as little as it can; fixed and fully constrained geometry stays. Dragging a curve of the sketch being edited now drags it (it used to start a box selection). Tests for per-entity fully-constrained feedback
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
|
2026-10-08 07:50:35 +00:00 |
|
|
bherbruckandClaude Opus 5.5
|
bbd0a19260
|
Sketch Palette, docked at the right while sketching: line type of the selected curves (normal, construction, centerline), Look At, and options kept with each sketch (sketch.options: Sketch Grid, Snap, Slice, Show Profile, Show Points, Show Dimensions, Show Constraints, Show Projected Geometries, 3D Sketch), the degrees of freedom, Finish Sketch. Slice cuts the model at the sketch plane; Snap off places points at the cursor
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
|
2026-10-08 07:50:35 +00:00 |
|
|
bherbruckandClaude Opus 5.5
|
a7f301bde6
|
Delete for everything: selection.delete removes sketch entities, features and sketches (with their dependents), construction planes, bodies (Remove feature), occurrences and components, and canvases in one undo step, with a dry run; Delete/Backspace and every menu's Delete go through it and ask first, listing what goes with it and what would fail; faces say Delete Face is not available yet; ui.confirm control method
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
|
2026-10-08 06:44:11 +00:00 |
|
|
bherbruckandClaude Opus 5.5
|
4cba923bec
|
Large-model viewport performance: bounding-box culling for face/edge/vertex picking, cached per-body boxes and model extent, picks reused while nothing changed and skipped while the view moves (400 bodies: hover 18.7 -> 1.9 ms, orbit 21 -> 2.6 ms; docs/perf.md)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
|
2026-10-08 06:24:22 +00:00 |
|
|
bherbruckandClaude Opus 5.5
|
89c2c440ac
|
Dialog parity with Fusion: header with fold glyph, label column, Select/N selected chips, info glyph and OK greyed until valid, Fusion colours; Extrude rows Start (profile plane/offset), Direction (one side, two sides, symmetric), Extent Type (distance/all), Taper Angle; Hole rows Placement (single/multiple sketch points), Extents, Hole Tap Type (tapped size), Drill Point, Tip Angle; pattern Type switch; Mirror operation; pre-selection routes every item to the input that takes it (planar-only inputs, fillet tangent chains), with tests
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
|
2026-10-08 05:51:10 +00:00 |
|
|
bherbruckandClaude Opus 5.5
|
7757e6d9c7
|
Construction toggle on every curve type: the selection switches as a whole (slots, polygons; to construction unless all already are), projected curves too; construction curves are drawn dashed and centerlines dash-dot; profiles update at once
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
|
2026-10-08 05:36:15 +00:00 |
|
|
bherbruckandClaude Opus 5.5
|
00ddaa25f5
|
Canvas and Decal (FusionAddCanvasCommand, FusionAddEditDecalCommand): PNG/JPEG reference images stored in the design (base64), placed on an origin/construction plane, a sketch plane or a planar face; canvas.edit (position, width, angle, opacity, flip, visibility), canvas.calibrate (scale by a known distance), canvas.delete; drawn textured in the viewport; toolbar tools pick the file, then the plane or face
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
|
2026-10-08 05:31:06 +00:00 |
|
|
bherbruckandClaude Opus 5.5
|
5b8816aa7d
|
Fix/Unfix on every sketch entity: points (Fix constraint) and lines, arcs, circles, ellipses, splines and conics (fixed curves hold their points and radius); ConstraintFix takes entities (fixes them all unless all are fixed); the toolbar button and the context menu act on the whole selection; fixed points never move when dragged or solved; projected geometry counts as fixed; fixed geometry is drawn green; sketch.inspect reports fixed
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
|
2026-10-08 05:12:13 +00:00 |
|
|
bherbruckandClaude Opus 5.5
|
187ffd0a03
|
Sketch dimensions drawn as dimensions: extension lines, dimension lines and arcs with arrowheads (flipped outside when tight), the value centred on the line (fx: for expressions), R/Ø leaders, angle arcs, arc-length mark, driven ones in parentheses in a muted colour; click selects, Delete removes, drag moves the text (sketch.dimension_text, kept relative to the dimension), double-click edits the value in place with parameter completion
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
|
2026-10-08 04:44:24 +00:00 |
|
|
bherbruckandClaude Opus 5.5
|
9a9caa6511
|
Browser tree: components with an activation radio (others drawn faded), ground pin, groups in Bodies/Sketches/Construction (new, from selection, rename, ungroup, kept in the design: browser.group/ungroup/rename_group/move/order), drag and drop to reorder, into and out of groups and into another component, Ctrl/Shift multi-select, hover lights the bodies, folds remembered; occurrence Move/Copy with a gizmo and Capture Position/Revert; the viewport shows bodies where their occurrences place them
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
|
2026-10-08 03:37:36 +00:00 |
|
|
bherbruckandClaude Opus 5.5
|
063d55bdb3
|
Sketch drawing: a point snapped to a line's midpoint stays there ("mid:<line>" point arguments add a MidPoint constraint)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
|
2026-10-08 02:45:17 +00:00 |
|
|
bherbruckandClaude Opus 5.5
|
0da4c756c8
|
Sketch drawing inference: the cursor snaps to line midpoints and to horizontal/vertical alignment with the previous point (with an H/V/Mid hint), so lines drawn that way get their constraints inferred
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
|
2026-10-08 02:35:08 +00:00 |
|
|
bherbruckandClaude Opus 5.5
|
888ac0f5c4
|
Navigation bar: Look At (selected face or plane, else the active sketch) and visual style (shaded with edges, shaded, wireframe; kept between runs); F6 fits the view
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
|
2026-10-08 02:22:43 +00:00 |
|
|
bherbruckandClaude Opus 5.5
|
0136567d4d
|
Double-click an edge selects its smooth loop
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
|
2026-10-08 02:05:07 +00:00 |
|
|
bherbruckandClaude Opus 5.5
|
fa8da64613
|
Context menus: radial marking menu in the viewport (Repeat on top, Undo, Delete, Press Pull, Create Sketch, Extrude, Move/Copy, Hole; right press-and-hold or a right drag on the ring flicks to pick), contextual lists for faces, edges, bodies, sketch entities (construction, fix, applicable constraints) and empty space; browser menus for bodies, sketches and components; rename box, Properties window; body.rename and sketch.redefine commands; ui.menu / ui.menuPick / ui.rename control methods
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
|
2026-10-08 01:38:52 +00:00 |
|
|
bherbruckandClaude Opus 5.5
|
1b664bb1b0
|
Sketch UI: click a constraint glyph to select it, Delete removes the constraint; glyphs sit half way along their curve; lighter randomized sketch test
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
|
2026-10-08 01:31:16 +00:00 |
|
|
bherbruckandClaude Opus 5.5
|
967bee179a
|
Physical Material dialog (body appearance follows the material: steel, brass, copper, PLA…), Enter applies every OK dialog
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
|
2026-10-08 01:20:33 +00:00 |
|
|
bherbruckandClaude Opus 5.5
|
1988594a13
|
Section Analysis (FusionHalfSectionViewCommand, INSPECT): cut the view by an origin plane, construction plane or planar face with an offset (drag arrow) and flip; the inside of cut bodies shows a flat cap colour; live while the dialog is open, Remove Section on the right-click menu; viewport shader validated in a test
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
|
2026-10-08 00:45:44 +00:00 |
|
|
bherbruckandClaude Opus 5.5
|
24627d4f0a
|
Selection filter in the SELECT panel: select bodies (a face picks and highlights its body), faces, edges, vertices, sketch geometry
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
|
2026-10-08 00:45:38 +00:00 |
|
|
bherbruckandClaude Opus 5.5
|
cde3af7a3c
|
UI: interactive tools for the new sketch commands (crates/ui-egui/src/sketch_tools.rs): Project/Intersect/Include and the other model-pick tools, Trim/Extend/Break by clicking the piece, Offset (curve then side), sketch Fillet/Chamfer at a corner (radius dialog), Curvature, tangent circles, SketchConstrainer, Polygon, Mirror and sketch patterns, Project To Surface, Intersection Curve, Spun Profile, point tools for midpoint line, tangent arc, ellipse, conic, splines, arc slots, blend curve, and a text box for Text; constraint glyphs on the active sketch; text outline points hidden. Hooks in tools.rs/viewport.rs/lib.rs are a few lines
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
|
2026-10-08 00:28:02 +00:00 |
|
|
bherbruckandClaude Opus 5.5
|
beab69cfb2
|
Measure tool (I): pick one or two vertices, edges or faces for length/area/position, minimum distance with ΔX/ΔY/ΔZ and a line in the view, and the angle between planar faces or straight edges (MeasureCommand items, engine test); theme switch from the control channel no longer leaves stale scene colours
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
|
2026-10-07 23:54:36 +00:00 |
|
|
bherbruckandClaude Opus 5.5
|
b511ac6124
|
Sketch: drag points of the active sketch (the solver keeps the constraints, one undo step per drag); closed profiles shaded
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
|
2026-10-07 23:16:59 +00:00 |
|
|
bherbruckandClaude Opus 5.5
|
a1accbf46e
|
Extrude: Two sides direction with a second draggable arrow, taper angle field; ground grid drawn under the model (bodies below the grid plane are no longer hidden by it); preview extent included in the view depth range
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
|
2026-10-07 23:06:33 +00:00 |
|
|
bherbruckandClaude Opus 5.5
|
79a4194f6e
|
Revolve angle rotator (drag the arc end, 5 degree steps), right-click menu in the viewport (Repeat last command, commands for the selection, fit/home/undo), larger inline sketch dimension boxes
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
|
2026-10-07 22:46:34 +00:00 |
|
|
bherbruckandClaude Opus 5.5
|
956492c993
|
Dark theme (default): Fusion-like blue-grey viewport #2e3440, darker chrome, subtle grid, light text, blue accent; light theme kept as a second Tokens set; toggle on the application bar (sun/moon), ui.set {dark}, kept between runs (eframe storage; browser local storage on the web); viewport, sketch, glyph, view cube, timeline and overlay colours all come from the theme; preview spinner and state in ui.inspect
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
|
2026-10-07 22:30:36 +00:00 |
|
|
bherbruckandClaude Opus 5.5
|
eb22a149b1
|
Sketch inline dimensions while drawing (line length/angle, rectangle width/height, circle diameter, arc radius/sweep, polygon radius/sides, slot length/width): boxes sit on what they measure, typing goes into the first box and locks it, Tab moves on, Enter places the shape, typed values become dimension constraints (expressions and units); Press Pull (Q: faces extrude/cut by sign, edges fillet), X toggles construction on selected curves, Move dialog (M) with preview
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
|
2026-10-07 21:40:14 +00:00 |
|
|
bherbruckandClaude Opus 5.5
|
7ef3426cb3
|
Keyboard-first commands: E/F/H open with the on-canvas value box focused as soon as the geometry is picked (typing replaces the value, Enter applies, Tab moves on, Esc cancels), extrude direction arrow; Extrude takes planar body faces (face: [x,y,z] copies the face boundary into a sketch), so select-face-then-E press-pulls; join/cut previews show the tool body (cut see-through red)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
|
2026-10-07 21:23:47 +00:00 |
|
|
bherbruckandClaude Opus 5.5
|
d44083d1cc
|
Live operation previews: open feature dialogs (new or Edit Feature) evaluate on a scratch session off the UI thread (Session::preview, no document or undo changes) and draw the result in place: new surface tinted, removed material as a translucent ghost; errors show in the dialog and keep the last good preview; a failing join/cut still shows its tool body
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
|
2026-10-07 21:09:16 +00:00 |
|
|
bherbruckandClaude Opus 5.5
|
6c819a7b06
|
UI: command dialogs dock flush to the right edge of the viewport below the view cube, shrink-wrapped (260-380 px), anchored on resize; Esc on an edit restores the timeline marker
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
|
2026-10-07 20:53:00 +00:00 |
|
|
bherbruckandClaude Opus 5.5
|
9dfd7cad60
|
Timeline editing: double-click or Edit Feature reopens the feature's dialog filled in (model rolled back to it, references highlighted) and rebuilds it in place; history marker drag; drag to reorder with dependency checks; context menu (edit, edit profile sketch, rename, suppress, roll marker here, find in browser, delete with dependents); hover links timeline and geometry; fillet edges and hole positions re-resolve after upstream edits (warnings when moved)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
|
2026-10-07 20:19:56 +00:00 |
|
|
bherbruckandClaude Opus 5.5
|
97e73b0935
|
Selection feedback and origin: hover and selected highlights (theme tokens), origin planes/axes/point at a fixed screen size with browser eye toggles, click-to-pick sketch planes and faces with camera animation (Finish Sketch returns), multi-select dialog inputs with pre-selection, tangent chains and face-to-edges, window/crossing box selection, shell/draft/mirror/hole dialogs
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
|
2026-10-07 20:00:17 +00:00 |
|
|
bherbruckandClaude Opus 5.5
|
cd993e35a3
|
View changes animate: view cube faces, edges and corners, Home and Fit move the camera over 500 ms (quaternion slerp, ease in-out); mouse navigation cancels; control channel snaps unless animate
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
|
2026-10-07 19:33:19 +00:00 |
|
|
bherbruckandClaude Opus 5.5
|
8a811f8eff
|
M0: desktop app: toolbar, browser, timeline, GPU viewport, view cube, sketch tools, dialogs, control channel
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
2026-10-07 17:54:58 +00:00 |
|