bherbruck and Claude Opus 5.5
1e8fc25976
X and the toolbar's Construction no longer start a pick tool (Fusion has none): with a selection they convert it, with nothing selected they switch construction mode, outside a sketch they say so. Center Rectangle draws both diagonals as construction, the centre at their crossing, with only the first carrying the midpoint constraint (the second is implied), so a fresh one stays at 4 DOF. Scenarios s30 (pattern a hole) and s32 (cut in the active component) enabled now that b36b332 is on main
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 16:07:33 +00:00
bherbruck and Claude Opus 5.5
35ac9569dc
Holes as deep as the material: a drilled hole whose drill point would start exactly on the exit face is cut through (QA: depth = plate thickness failed with coincident faces on curved bodies)
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 15:41:02 +00:00
bherbruck and Claude Opus 5.5
c0f6aeb574
Regression test: lips, grooves and outside lips after bosses (to the rim, ribbed to the walls, against a wall, drafted and filleted) on a shelled enclosure
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 15:41:02 +00:00
bherbruck and Claude Opus 5.5
8497542a3d
Chamfers with two distances or a distance and an angle (distance2 / angle, flip for which face comes first), on straight edges between planar faces; pattern copies keep them
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 15:41:02 +00:00
bherbruck and Claude Opus 5.5
51ffaf9945
IGES 5.3 import and export; OBJ import; STL reading hardened
...
- IGES import (kernel iges_in, from the published specification). The file
is restated as STEP and read by the STEP reader, so an IGES file becomes
the same Import base feature.
- Manifold solid B-reps (186/514/510/508/504/502).
- Trimmed (144), bounded (143) and bare B-spline surfaces, sewn into a
solid by shared edges, with face orientation made consistent.
- Curves: lines, arcs, ellipses, composite and rational B-spline curves.
- Surfaces: planes, analytic surfaces 190-198, B-spline surfaces,
surfaces of revolution and tabulated cylinders.
- Transformations, units, colours, names (406 form 15 or labels).
Open, insert and drop .igs/.iges like STEP.
- IGES export (kernel iges_out): each body as a manifold solid B-rep on the
surfaces a STEP export uses, with name properties and colours.
ExportCommand to .igs.
- OBJ import as mesh bodies: objects/groups, polygons fanned, negative
indices, bad lines reported.
- STL: binary files whose header starts with "solid" and those with a zero
triangle count read as binary; non-finite vertices dropped; facet
normals ignored; ASCII with non-UTF-8 names. Mesh bodies get consistent
winding (stray inverted facets turned over).
- Tests: primitives and features round-trip through IGES (volume, area,
name, colour). Six trimmed patches sew into a closed box. Hostile IGES,
OBJ and STL inputs never panic. STL quirks. The engine exports a design
to IGES and opens it again. All 76 oracle parts round-trip through IGES
with matching volume (local check).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 15:17:25 +00:00
bherbruck and Claude Opus 5.5
7a2eb059c4
Components are frames (user bug #4 )
...
What a component holds moves with its occurrence, and picks in the world land in the
component's frame:
- Sketches and construction planes show where their component is placed (free move, joint
drive, Capture Position); sketch.inspect reports sketch points in the world.
- frames.rs maps a command's world picks into the frame of the body they lie on (through the
inverse of its placement: a moved component or a pasted instance), points that make new
geometry into the active component's frame, and directions with them; instance body names
("Body1 (Pin:2)") become the component's body. Fillet/chamfer edges, shell/offset/draft
faces, face extrude/revolve, sketch on face, holes, sheet metal and plastic picks, primitives,
appearance faces, analyses. Once per command (not again for commands run by commands); the
active-frame fallback stays for commands without a table. Nothing changes while every
placement is the identity.
- component.move_bodies keeps a body where it is in the world (Document.body_offsets: from the
new component's frame to the one it was made in; renames and deleted components follow).
- The UI reads the placed model (Session::world_state) for display, picking, sketch editing and
dialogs; live previews use it once anything is placed.
Tests (engine): sketches and construction planes move (and turn) with the component; world
picks fillet, sketch, hole and make boxes in a moved component; a pick on a pasted instance;
move_bodies keeps the world place there and back; a sketch on a face follows a Move feature.
QA's s34 now runs.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 15:04:32 +00:00
bherbruck and Claude Opus 5.5
b36b332619
Patterns and mirrors of holes drill each copy afresh (its spot moved by the instance transform and found on the surface there), so a blind hole's depth counts from the face at the copy instead of from the bottom of the original hole (QA s30: three blind holes now remove three holes)
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 14:25:27 +00:00
bherbruck and Claude Opus 5.5
83a10c813a
Unit-less parameters used as lengths read in the design's units (feature evaluation and parameter values; bare numbers stored in inputs stay mm); document.units checks what the geometry reads (Document::length_inputs) and writes the old unit (with it as the parameter's unit) into bare unit-less parameters that would move; cached results keyed on the design's units
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 14:25:27 +00:00
bherbruck and Claude Opus 5.5
e30309be0d
Insert Fastener (FusionFastenersCommand) on SOLID > INSERT, icon "fastener": the Insert Part dialog's command (same as parts.insert)
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 14:25:27 +00:00
bherbruck and Claude Opus 5.5
f7c26d8dfe
Standard parts library (parts.library, parts.insert, parts.resize): ISO 4762 socket head cap screws, ISO 4014/4017 hex bolts, ISO 4032 nuts, ISO 7089 washers, ISO 4026 set screws, ISO 8734 dowel pins and 6000/6200/600-series bearing envelopes, M3–M20, built in code from the standards' dimensions as their own components with cosmetic threads; inserted at a hole's rim they get a rigid joint that puts them on the hole's axis seated on its face; resize rebuilds in place. Circle joint origins are named after the cylindrical wall
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 14:25:27 +00:00
bherbruck and Claude Opus 5.5
b2d0452656
Fold: with no fixed side the larger side stays, whichever side of the line it is on (the side areas were measured from the wrong point for one side; QA s22)
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 14:25:27 +00:00
bherbruck and Claude Opus 5.5
05b38e0f5f
Persistent naming for sheet metal: base panel edges are named after the base sketch line they lie on, flange edges after their flange (F<feature>.<k>) and side (far / side0 / side1, top or bottom face); flanges and hems store edge names and pick by name first (a name that is gone keeps the point with a warning)
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 14:25:27 +00:00
bherbruck and Claude Opus 5.5
23e50e4540
Persistent naming: shell inner faces named after the wall face they offset (F<shell>:inner:<face>), sweep and loft faces by start/end caps and the profile curve each side sweeps
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 14:25:27 +00:00
bherbruck and Claude Opus 5.5
7c611aec0c
Booleans stay in their component: a join, cut or intersect without explicit targets changes only its own component's bodies (and what it made), auto join/cut looks only at the active component; any feature takes participants: [bodies] to reach other components ("*" = every body); file format 5 gives older features in designs with components participants ["*"] so they keep their shape
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 14:25:27 +00:00
bherbruck and Claude Opus 5.5
2886399215
Bare lengths typed into features (commands and parameter edits) mean the design's units: they are stored with the unit written in (2 in an inch design is "2 in"); lengths with units, angles and mm designs are unchanged
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 14:25:27 +00:00
bherbruck and Claude Opus 5.5
294597cc96
Face colours and opacity in STEP and 3MF export (and STEP import)
...
- Bodies carry a Paint for export (opacity, per-face colours), set by
Document::painted from the appearance model. The paint comes from a
face appearance, a body/component appearance's opacity or a material
look (Glass), and falls back to the paint the body was imported with.
- STEP: faces with colours of their own get a STYLED_ITEM on their
ADVANCED_FACE. See-through looks add SURFACE_STYLE_TRANSPARENT.
Differently coloured pieces are not merged into one face.
- STEP import reads face styles and transparency. The reader tracks the
file face of each kernel face (bands split in two keep it), so imported
face colours land on the right faces; the design shows them through
face_colors.
- 3MF: per-triangle colours (pid/p1 into the base materials, carried
through welding) and the object's alpha (#RRGGBBAA).
- Tests: a blue half-transparent cube with a red top exports, re-imports
with its opacity and the red top face, and keeps it when opened and
exported again. 3MF writes the alpha and the face entry.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 14:02:10 +00:00
bherbruck and Claude Opus 5.5
06186be555
Press Pull on a fillet's or chamfer's face edits that feature's size by the distance (found through the face's persistent name); on another curved face it offsets the face, with the rest of its surface (both halves of a hole's wall)
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 13:39:34 +00:00
bherbruck and Claude Opus 5.5
0a1b6f0fff
STEP export: pieces of a plane or extruded cylinder written as one face
...
Fusion round trip WARNs on face counts:
- 48: the pulley's annular end faces arrived as 240° and 120° sectors.
- 54: the side faces and holes of a body glued to its mirror image came
in halves.
Changes:
- Planes merge: PLANE faces and flat B-spline sheets, as well as revolved
planes. A plane keeps several loops (an annulus, a face with holes), no
seam. Flat B-spline sheets are written as PLANE.
- Pieces of an extruded cylinder (B-spline sheets) merge when their edges
are circles square to the axis. The merged face is written as a
CYLINDRICAL_SURFACE, with its parameter seam on the face's seam edge.
- A full turn's loop is built explicitly: ring, seam, other ring (or the
apex on the axis), seam back. Before, it depended on edge order, and
after 81c85b5noreply@anthropic.com >
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 13:16:39 +00:00
bherbruck and Claude Opus 5.5
9bd7c8eb33
document.units: unit-less user parameters that would change meaning keep the old unit written out (values are compared before and after); test with a length and a count
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 12:52:22 +00:00
bherbruck and Claude Opus 5.5
1c12fa83b0
Holes: a tapped hole takes the tap drill of its thread (major − pitch) when no diameter is given, and clearance: "M6" (fit close, normal or loose) gives the ISO 273 clearance diameter
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 12:24:04 +00:00
bherbruck and Claude Opus 5.5
13070abc55
Document Settings: design units (document.units: mm, cm, m, in, ft; values keep their meaning) from the browser's Units row, display precision row; new designs take the preferred units; the Properties window shows lengths, areas and volumes in the design's units with the chosen precision
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 12:09:31 +00:00
bherbruck and Claude Opus 5.5
6653db806e
Joint dialog after the engine's mating default: the dialog's Flip is the command's flip (no double flip with 4c3a5d9); Appearance dialog on the new appearance model; AppearanceCommand takes a colour with any name (the dialog's palette names)
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 11:37:33 +00:00
bherbruck and Claude Opus 5.5
2c383460e9
Joints mate by default (Fusion's convention): origin B's z is turned against origin A's, so two picked faces meet face to face and B sits on A instead of inside it; Flip now means don't mate. File format 4 inverts older joints' flip so they keep their placement; as-built joints and rigid groups stay where they are
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 11:37:33 +00:00
bherbruck and Claude Opus 5.5
e7a85b30f7
Persistent naming: joint origins on faces and circular ends, and face appearances, store the face's name and find it by name first (a joint whose face is gone reports it instead of attaching elsewhere)
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 11:37:33 +00:00
bherbruck and Claude Opus 5.5
e7aff4fef0
Persistent naming: shell, draft, offset-face and replace-face faces and hole placements store their faces' names (Feature.face_names) and are moved onto the named face before evaluating (a split face: the nearest piece, with a warning; a vanished face: the picked point, with a warning)
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 11:37:33 +00:00
bherbruck and Claude Opus 5.5
99886594e7
Persistent naming: sketches on faces store the face's name and find it by name first (an upstream feature that adds a nearer parallel face no longer moves the sketch); a vanished face falls back to the old geometric search with a warning
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 11:37:33 +00:00
bherbruck and Claude Opus 5.5
452ee5f9f9
Persistent naming, step 2: revolved faces named by the section curve they sweep and their angle caps, box faces by side (+x … -z), cylinders by top/bottom/side, and pattern and mirror copies after their sources through the instance transforms (<source>@F<pattern>.<instance>)
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 11:37:33 +00:00
bherbruck and Claude Opus 5.5
72297047d5
Persistent naming, step 1 (plan/adr/0002): faces are named from their history (a face lying on an input face keeps its name; new faces by role: F<feature>:side:<sketch curve>, :start/:top/:bottom caps, :blend:<edge>, …; split pieces #k along their spread), edges by the faces they separate (pieces ~k); names worked out lazily per body and shared by its clones; fillets and chamfers store edge names and resolve by name first (a split edge takes the piece nearest the picked point with a warning, a vanished one falls back to the point with a warning); model.faces and model.edges report names; tests for resize, suppress, reorder, an upstream split and a removed sketch segment
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 11:37:33 +00:00
bherbruck and Claude Opus 5.5
3efe347809
Appearance API for the dialog: faces as {body, point} too, library entries carry a category, appearance.list gives in_design (each look used, with its bodies, faces and components)
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 11:37:33 +00:00
bherbruck and Claude Opus 5.5
99385b1e31
Fillets and chamfers keep their edges through upstream edits: each picked edge remembers its direction and its body's bounding box when picked (Feature.edge_refs, set by the commands and by timeline.edit); a reference point that is off every edge after an edit is carried to the same place in the body as it is now and kept when an edge running the same way is there (QA s06: a fillet on the right top edge follows the edge when the sketch widens); otherwise the nearest edge with a warning as before
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 11:37:33 +00:00
bherbruck and Claude Opus 5.5
5b9749aad6
Fold on flange panels (the side toward the flange's own bend stays; flanges and folds on the moving part ride along) and through cut-outs whose edges run along or across the bend; slanted or curved edges across a bend still say not supported (they would need helical edges)
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 11:37:33 +00:00
bherbruck and Claude Opus 5.5
a01f191d25
Evaluation cache: every feature evaluation is kept by a key of its own inputs, the document context it reads and a digest of the model it starts from (bodies identified by the evaluation that made them, kept while passed through), shared with previews and scratch copies; setting a value back, undo, redo and repeated evaluations reuse results (a 20 × 20 patterned plate builds in 1.7 s instead of 7.5 s; undo/redo of a parameter edit 0 ms); cached and from-scratch evaluation compared in a test; numbers in docs/perf.md (solvecraft-cli bench-edit). Designs read now always get feature input names and occurrences filled in
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 11:37:33 +00:00
bherbruck and Claude Opus 5.5
b78cb886b8
Configurations: a configuration table of rows (parameter expressions and feature suppressions per row) that switch the design (config.activate: undoable, all or nothing), kept through parameter renames and feature deletes; FusionStartDesignConfigModeCmd, FusionShowDesignConfigPanelCmd (with whether the design still matches the active row), config.column, config.row
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 11:37:33 +00:00
bherbruck and Claude Opus 5.5
10a67ef259
Contact Sets (EnableContactSetsCmd, EnableAllContactCmd, DisableAllContactCmd, ContactSetCmd, contact.edit/list/check): driving a joint stops where bodies of one set would pass through each other (bisection to the touch; penetration found by ray parity and depth on the tessellations); Motion Study (FusionMotionStudyCommand: joint values keyed along a timeline, motion.play, motion.export of occurrence poses per step as JSON or CSV without changing the design, contact-aware); Exploded views (explode.create automatic or by hand, explode.show without changing placements)
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 11:37:33 +00:00
bherbruck and Claude Opus 5.5
a283e424d9
Appearances on faces, bodies and components (face > body > component > material > imported colour), with names and opacity and a built-in library of 20 (metals, ABS colours, glass, rubber, wood, paint); AppearanceCommand takes bodies, faces (points) or components, a library name or a colour with opacity, or nothing to clear; appearance.library, appearance.list (a body's resolved look and per-face colours); file format 3 turns the old body colour map into body appearances
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 11:37:33 +00:00
bherbruck and Claude Opus 5.5
9f8915996d
Sheet metal Fold (SheetMetalFoldCmd): fold the base panel along a sketch line (followed when the sketch changes) or two points on its face; angle, bend radius and K-factor from the rule; the bend zone (BA = θ(R + K·T)) comes out of the existing sheet so the flat pattern keeps its size; the line at the bend's centre, start, end or on the mould line; the side holding a picked point stays (default the larger), flip folds down; flanges on the moving part ride along
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 11:37:33 +00:00
bherbruck and Claude Opus 5.5
f40356a74f
Never lose work: atomic saves (temporary file, flush, rename) keeping the replaced version as <file>.bak; autosave of unsaved changes into a recovery folder (every 5 min, preference autosave_minutes, and after commands over 1.5 s; skipped when unchanged; entries locked while their app runs); Recover unsaved design? at launch; doc.recovery_list / doc.recover / doc.recovery_discard; kill-mid-save test
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 11:37:33 +00:00
bherbruck and Claude Opus 5.5
940c425316
Accessibility Analysis: faces a tool coming along a direction reaches (facing it, nothing above: a depth map of the model seen from that direction, tested per pixel on the GPU) shade green, the rest red; the analyses (zebra, draft, curvature map, environment map, accessibility, minimum radius, isocurves, curvature comb, center of mass) also on SOLID INSPECT, and Interference on sketch INSPECT; path patterns follow 3D sketch curves through the same path chain as sweeps (path_segments_3d folded into path_points)
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 10:36:53 +00:00
bherbruck and Claude Opus 5.5
a7fc1fe532
S box: command search at the cursor (fuzzy over name, id, tab and panel; recent first; pinned favourites as a mini toolbar; kept between runs); Named Views in the browser (save the camera, restore animated, rename, update, delete; Top/Front/Right/Home listed; view.save/rename/delete/list, saved in the design); Keyboard Shortcuts (File menu): rebind any command, conflicts reported, clear, reset, kept between runs; ui.shortcut control method
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 10:29:11 +00:00
bherbruck and Claude Opus 5.5
d0a9ef27ca
Appearance dialog (MODIFY > Appearance, A)
...
Library swatches by category (the engine's library when it offers one, else built-in looks:
metals, plastics, paints, woods, glass with opacity), the looks in this design, a colour picker
and opacity, and the objects to apply to (bodies/components or faces). A swatch dragged onto a
body or face in the viewport, or onto a body's row in the Browser, applies at once; Apply and
OK give the picked objects the current look; pre-selected bodies become the objects.
Browser: rows under a drag of another kind count as hovered, and the Browser's own drops no
longer swallow other payloads (egui's take_payload takes any type), so swatches dropped on its
rows land.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 10:22:53 +00:00
bherbruck and Claude Opus 5.5
a3d9eec238
Test: a pipe along 3D sketch curves ends square to the path (its end cap may reach past the end point)
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 09:42:34 +00:00
bherbruck and Claude Opus 5.5
7a2b81fbf2
Environment Map Analysis: the model's faces as a mirror reflecting a studio (sky, horizon band, floor with light streaks, two light panels); toggles like the other surface analyses
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 09:42:34 +00:00
bherbruck and Claude Opus 5.5
4126ae5a75
Clippy: assign operators in the path sweep, isocurve grid and centre of mass
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 09:42:34 +00:00
bherbruck and Claude Opus 5.5
dea1f46266
Zebra, Draft and Curvature Map analyses (view state on the session, no undo step): the GPU shades the model's faces with reflected stripes, draft-angle bands to a pull direction (green, yellow within the angle, red) or a blue-green-red curvature map; the toolbar button toggles each
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 09:42:34 +00:00
bherbruck and Claude Opus 5.5
319386760f
Isocurve Analysis (FusionIsoCurveAnalysisCommand): a grid of isoparametric curves each way across picked faces (the face cut by evenly spaced planes of each family), drawn while the tool is active
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 09:42:34 +00:00
bherbruck and Claude Opus 5.5
561df89b1d
Minimum Radius Analysis (sketch curves exactly, edges, faces from the mesh normals; every face when nothing is picked) and Center of Mass (all bodies or picked ones, uniform density) in the sketch INSPECT panel, with markers and labels in the viewport and their own icons
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 09:42:34 +00:00
bherbruck and Claude Opus 5.5
b9bc75670c
Exact profiles for splines of any degree (a degree-4…7 Bézier segment kind, Seg2::Bezier, extruded as B-spline edges) and for free-form curves cut by crossings (exact sub-curves whose ends are moved to the true crossing, found by Newton; polylines only where that fails)
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 09:42:34 +00:00
bherbruck and Claude Opus 5.5
f79b5c1045
Sweeps and pipes along 3D sketch curves (projected, intersection and included curves): a path that uses sketch wires is followed as one chain of points by a new kernel sweep_path (rotation-minimising frame; smooth B-spline walls per profile segment, or ruled walls mitred at sharp corners and for profiles with holes); 3D sketch curves can be picked as sweep paths
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 09:42:34 +00:00
bherbruck and Claude Opus 5.5
3aacebdda4
Canvases in the 3D pass: textured quads depth-tested against the model (the model hides them, decals sit on their face), with the section cut applied; Canvas panel (opened after placing a canvas or by Edit Canvas in INSERT): opacity slider, width, angle, flip, visibility, delete
...
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 09:42:34 +00:00
bherbruck and Claude Opus 5.5
bdc15d2204
Start page and document tabs
...
Start page (shown on launch without a file, and from the house button in the application bar):
New Design, Open, recent designs (kept in the preferences, newest first) and built-in samples,
each card with a picture rendered from the design in the background. Samples are scripts of
engine commands: the sample plate plus a sheet metal bracket, a hinge assembly with a revolute
joint, a plastic enclosure (lip, bosses, rest, snap fit), a bolted flange with a parametric
circular pattern and a vent plate with a parametric rectangular pattern (test: all build
without a failing feature).
Several open designs as tabs in the application bar: each keeps its own session (undo,
selection), camera and hidden/shown items; + and Ctrl+N open a new design, opening a file or a
sample uses a new tab unless the current design is blank, closing a tab with unsaved changes
asks Save / Don't Save / Cancel. Control channel: ui.documents and ui.home (docs/control-protocol.md).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 09:23:46 +00:00
