One edge flange feature gave all its flanges one height and one angle. A
part whose flanges lean differently took one feature per angle, and
flanges of separate features don't close toward each other, so its
corners stayed open.
- sheet.flange (edge): an entry of `edges` is a point [x, y, z] as before,
or {point, angle?, height?} whose angle and height (expressions, checked
like the feature's) replace the feature's for that edge. Bad input is
refused with the edge named. Before, the object form was read for its
point and the rest was ignored without a word.
- The feature stores its edges as FlangeEdge. An edge without values of
its own is written as the plain point it always was, so designs without
them are read and written as before; an unknown key in an edge is
refused, not dropped.
- The edges' values are feature inputs of their own (Edge angle, Edge
height, after the feature's), so parameters, renames and
parameters.change reach them. timeline.edit names the edges again when
it changes them, so each value stays with its edge.
- SheetBody::add_flanges_each trims every edge by its own setback and
adds the flanges. The corners between them close as between equal
flanges: the closing already works from the two flanges it joins (each
one's fold and leg), so the flat pattern follows by hand from the
angles, the heights and the rule (the tests derive it).
- The Flange dialog shows a row per picked edge with an angle and a
height box (empty: the dialog's value) once more than one edge is
picked, and brings them back on Edit Feature.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Honor design units in sketch dimensions and measurements
* fix: apply document units to specialized length controls
* Accept explicit units in length fields; document design-unit dimension values
Length fields in a design-unit control now evaluate what is typed as a
length expression: a bare number stays in the design's units, while an
explicit unit ("10 mm", "0.5 in", "1 in + 5 mm") is converted.
Document that a bare numeric sketch.dimension value from scripts, the
control channel or MCP is read in the design's units.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01RjGw4gA5ZvKrU8MQP6sBgT
---------
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Record ownership transfers in the timeline so earlier Join/Cut membership,
world placement, machining data and styles survive component moves, edits,
independent copying, undo and reopening. Preserve pending positions in history
snapshots and keep constructor transfers ordered during feature redefinition.
Retain shallow sheet pockets and exact planar intersection islands through
unfold/refold, with depth-aware flat previews and DXF export. Store explicit
3D wire coordinate spaces and migrate known legacy provenance without moving
saved points or analytic fits.
Infer unique eligible cylindrical Emboss targets, align Revolve manipulators
with actual extent geometry, and discard obsolete preview errors after input
correction. Certify constructed and immutable imported face styles using exact
source metadata while preserving legacy face names. Upgrade designs to format10
with bounded validation and geometry-preserving legacy migration.
The old ids live only in crates/engine/src/legacy_ids.rs (the legacy migration table): find_command maps them, so old scripts, recipes and control calls keep working, and saved shortcuts, recent and pinned commands are migrated on load (designs store no command ids). Parity maps the observed catalog ids to ours through xtask/data/fusion-ids.tsv. The agent rule now reads: our own dotted id, never another product's. Cargo.toml's repository points at github.com/bherbruck/solvecraft.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
What a component holds moves with its occurrence, and picks in the world land in the
component's frame:
- Sketches and construction planes show where their component is placed (free move, joint
drive, Capture Position); sketch.inspect reports sketch points in the world.
- frames.rs maps a command's world picks into the frame of the body they lie on (through the
inverse of its placement: a moved component or a pasted instance), points that make new
geometry into the active component's frame, and directions with them; instance body names
("Body1 (Pin:2)") become the component's body. Fillet/chamfer edges, shell/offset/draft
faces, face extrude/revolve, sketch on face, holes, sheet metal and plastic picks, primitives,
appearance faces, analyses. Once per command (not again for commands run by commands); the
active-frame fallback stays for commands without a table. Nothing changes while every
placement is the identity.
- component.move_bodies keeps a body where it is in the world (Document.body_offsets: from the
new component's frame to the one it was made in; renames and deleted components follow).
- The UI reads the placed model (Session::world_state) for display, picking, sketch editing and
dialogs; live previews use it once anything is placed.
Tests (engine): sketches and construction planes move (and turn) with the component; world
picks fillet, sketch, hole and make boxes in a moved component; a pick on a pasted instance;
move_bodies keeps the world place there and back; a sketch on a face follows a Move feature.
QA's s34 now runs.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
Fold: the bend line (a sketch line), an optional stationary side, Bend Line Position
(centerline, start, end, outside mould line), angle (on the canvas), bend radius (default from
the rule) and flip; live preview and Edit Feature (folds made from two points keep them). Its
own icon; listed after Hem on the SHEET METAL tab and in the timeline.
Configurations: Add Column lists parameters and features to pick, Add Row names the new row
Configuration<N> when no name is typed, bare numbers show with their parameter's unit, the row
name comes before its Activate button, and Enter commits a cell instead of closing the panel.
Motion Study: steps default to the engine's 100, the key's value row is "Value" and Enter there
commits the key (OK makes the study).
Scenarios s22 (fold, flat pattern, DXF; the expected volume is the folded sheet's, the bend
keeping the neutral layer), s23 (configurations) and s24 (motion study) now run.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
ASSEMBLE panel (SOLID, SHEET METAL, PLASTIC): New Component, Joint, As-built Joint, Joint Origin,
Rigid Group, Drive Joints, Motion Link, Interference. Joint origins are picked by hovering:
faces snap to their centre (round faces to the centre of the nearer end), edges to their middle
(round edges to their centre), vertices to themselves, shown as glyphs with their z axis. The
Joint dialog has the motion type, angle, offsets X/Y/Z, flip, per-value limits and Animate (the
preview plays the motion); joints and drives preview on the placed model (world states).
Drive Joints moves live with a slider. Interference lists the overlaps and shows them red.
Joints appear in the timeline and in a Browser Joints folder (edit, drive, suppress, delete).
SHEET METAL tab in Fusion's layout: Flange (base, edge or contour, from the picks; height arrow
on the canvas), Hem, Unfold, Refold, Convert to Sheet Metal, Sheet Metal Rules (rule manager),
Create Flat Pattern (flat view with up/down bend lines, bend table, DXF export).
PLASTIC tab with SETUP: Boss, Lip/Groove, Snap Fit, Rest, Manage and Assign Plastic Rules; Rib,
Web and the shared solid commands on the tab.
Every feature dialog has live preview, Edit Feature and pre-selection; icons drawn in code.
Toolbar layout per tab in workspace.rs; tests for the dialog to command mapping.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
