 bherbruckandClaude Opus 5.5
|
846bb112e2
|
Construction axes, points and planes from model geometry (SOLID ▸ CONSTRUCT): axes through a cylinder/cone/torus, perpendicular to a face at a point, through two planes, two points or an edge; points at a vertex, through two edges, three planes, at the centre of a circle/sphere/torus, at an edge and a plane, along a path; midplane, planes through two edges or three points, tangent to a face, along a path. References (doc::construct::GeoRef) keep picked faces and edges by persistent name and resolve on each evaluation (they follow the model); results live in ModelState.construct, in the component's frame; view::construction_axes/points/planes for the viewport; kernel::face_surface for a face's analytic surface
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
|
2026-10-09 12:47:56 +00:00 |
|
|
bherbruckandClaude Opus 5.5
|
05b38e0f5f
|
Persistent naming for sheet metal: base panel edges are named after the base sketch line they lie on, flange edges after their flange (F<feature>.<k>) and side (far / side0 / side1, top or bottom face); flanges and hems store edge names and pick by name first (a name that is gone keeps the point with a warning)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
|
2026-10-08 14:25:27 +00:00 |
|
|
bherbruckandClaude Opus 5.5
|
99385b1e31
|
Fillets and chamfers keep their edges through upstream edits: each picked edge remembers its direction and its body's bounding box when picked (Feature.edge_refs, set by the commands and by timeline.edit); a reference point that is off every edge after an edit is carried to the same place in the body as it is now and kept when an edge running the same way is there (QA s06: a fillet on the right top edge follows the edge when the sketch widens); otherwise the nearest edge with a warning as before
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
|
2026-10-08 11:37:33 +00:00 |
|
|
bherbruckandClaude Opus 5.5
|
9f8915996d
|
Sheet metal Fold (SheetMetalFoldCmd): fold the base panel along a sketch line (followed when the sketch changes) or two points on its face; angle, bend radius and K-factor from the rule; the bend zone (BA = θ(R + K·T)) comes out of the existing sheet so the flat pattern keeps its size; the line at the bend's centre, start, end or on the mould line; the side holding a picked point stays (default the larger), flip folds down; flanges on the moving part ride along
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
|
2026-10-08 11:37:33 +00:00 |
|
|
bherbruckandClaude Opus 5.5
|
66df249c0f
|
Plastic: Rest (round or rectangular pad, solid or hollow wall, draft) and Plastic Rules (the six-rule library, design rules from expressions using Thickness, active rule, rules assigned to bodies; a body's rule gives Boss and Rest their draft and grooves their clearance), plastic.rules; docs/oracle.md lists the plastic features as no oracle (licence) with the analytic tests that cover them
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
|
2026-10-08 05:50:50 +00:00 |
|
|
bherbruckandClaude Opus 5.5
|
4adfd69d6a
|
Plastic: Boss (draft, root fillet, hole, ribs), Lip and Groove along a shelled body's rim (inside or outside edge, groove clearance), Snap Fit (cantilever arm with a catch)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
|
2026-10-08 04:43:27 +00:00 |
|
|
bherbruckandClaude Opus 5.5
|
e5560e8035
|
Sheet metal: rules as expressions (Thickness, K-factor, bend radius, reliefs, gaps; may use parameters), sheet bodies kept as flat patterns and sewn folded from exact faces (new kernel::sew), Flange (base, edge with height to the outer face, angle, inside/outside/middle, several edges at once with corners closed to the rule gap, contour from an open chain), Hem, Unfold/Refold with cut-outs that follow the bends, Convert to Sheet Metal, flat pattern with bend lines and bend table, DXF export; recipes: sm_flange, sm_hem, unfold/refold, rule edits (oracle 67-76 all pass)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
|
2026-10-08 04:11:35 +00:00 |
|
|
bherbruckandClaude Opus 5.5
|
b5051b2744
|
Rib and Web (to the next face or a depth, flip), Emboss/deboss on planar faces (EmbossCmd), Replace Face onto a parallel plane or face, Align (point to point, face to face), Remove (SoftDeleteCommand), timeline Copy/Paste of features (independent copies: own dimension parameters and input names, references remapped, optional translation)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
|
2026-10-08 00:42:26 +00:00 |
|