1b-agent/OneCAD
1
0 Fork 0
forked from 1b-agent/solidcraft-upstream
Code Pull Requests Activity
501 Commits 16 Branches 33 Tags
4e595deff2d1f4d458be91050659f28d0bdbba84
Commit Graph
14 Commits
Author SHA1 Message Date
bherbruck a6bb8fc924 feat: stabilize face attachments and closed spline workflows 2026-10-11 05:32:46 -04:00
bherbruck 07932d0f42 feat: preserve modeling intent across sketches, assemblies, and fabrication 
Persist typed sketch dimensions and bounded ordered configuration rules in format 8. Use exact occurrence paths and source identity for editing, movement, appearance, and mass. Preserve sheet material regions through cutting, folding, and exact DXF export; retain nested cavities and material islands.

Validation: cargo xtask ci passed, including 368 engine tests, 178 UI tests, 68 UI scenarios, 136 kernel tests, and the 10-crate wasm check. Actual preview workflows and legacy format-7 origin-corner reopening were inspected.
 2026-10-11 01:28:01 -04:00
bherbruck d71bdb78ec feat: strengthen modeling, configuration, and assembly workflows 
Preserve linked sketch identities through deterministic face projection and resizing. Fix origin-corner picking, persistent inline navigation, appearance editing, configuration styles, component properties, contact sweeps, sheet exports, analytic STEP offsets, and bounded rolling-ball fit accuracy.

Validated with full cargo xtask ci, native workflow screenshots, repeated enclosure replays, and analytic geometry regressions.
 2026-10-11 00:37:26 -04:00
CypherNaugh_0x 9c09e82cff sketch.dimension reports measured on the solved sketch: it reported the value the geometry had before the new dimension was solved, so dimensioning a 99.84 mm trough line to 100 answered measured: 99.84 and looked like the dimension had not taken. The command now measures the new dimension again once the sketch is solved (driven dimensions too), through a new solvecraft_sketch::measure_dimension that shares the solver's own measuring. Tests: lengths, a driven distance and a diameter report their solved values 2026-10-11 00:01:19 +02:00
bherbruckandClaude Opus 5.5 7f9a8f2afd Two-entity constraints move only the second pick (tangent, parallel, perpendicular, equal, concentric, coincident, collinear, symmetric, midpoint): the constraint is applied with the first entity held (solve_holding), the second keeping its size where it can (lines turn and slide, circles translate), then resizing; if the second is fixed, projected or fully constrained the first moves instead, and if neither can the constraint is refused and nothing changes; later solves hold nothing. Context-menu constraints keep the selection order; a curve picked before a point puts the point on the curve 
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-08 06:39:38 +00:00
bherbruckandClaude Opus 5.5 5b8816aa7d Fix/Unfix on every sketch entity: points (Fix constraint) and lines, arcs, circles, ellipses, splines and conics (fixed curves hold their points and radius); ConstraintFix takes entities (fixes them all unless all are fixed); the toolbar button and the context menu act on the whole selection; fixed points never move when dragged or solved; projected geometry counts as fixed; fixed geometry is drawn green; sketch.inspect reports fixed 
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-08 05:12:13 +00:00
bherbruckandClaude Opus 5.5 f9b7604ed1 Large sketches: the solver works on each component's own Jacobian (block-diagonal DOF analysis, no dense whole-sketch matrices), component grouping by map, and profile finding uses its grid for end checks and keyed sorting. A 10 000-entity sketch solves in 65 ms instead of 1.3 s and commands on it take ~0.2 s instead of 5 s; numbers in docs/perf.md 
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-08 04:56:07 +00:00
bherbruckandClaude Opus 5.5 94a0cdef77 Ellipse dimensions: major radius (type major: centre to axis end) and minor radius (a radius dimension on the ellipse) 
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-08 03:34:02 +00:00
bherbruckandClaude Opus 5.5 a6dc759a02 Fix: rectangles over-constrained after an edit (dragged sides collapsed) 
Parallel and perpendicular residuals were the cross/dot product over the sum of
the line lengths, so the solver could satisfy them by shrinking a line to
nothing. Dragging a corner of a rotated (3-point) rectangle collapsed a side to
zero; every later dimension then conflicted. The residuals are now the sine or
cosine of the angle (over the product of the lengths), which shrinking can't
improve. Tests drag, dimension, pin and square center, 2-point and 3-point
rectangles and check their degrees of freedom; oracle unchanged at 53/66.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-08 03:03:27 +00:00
bherbruckandClaude Opus 5.5 54ee20bef4 Sketch constraints and dimensions: Curvature (G2, ConstraintSmooth) and Polygon constraints; redundant constraints and dimensions are refused as over-constraining (Fusion behaviour), with driven (reference) dimensions that measure instead; arc length and linear diameter (about a centerline) dimensions; sketch.glyphs (constraint glyph anchors, conflicts) and sketch.snap (coincident/midpoint/on-curve/horizontal/vertical inference); solver damping floor keeps weakly seen variables from flying off 
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-07 23:10:03 +00:00
bherbruckandClaude Opus 5.5 8d7a0cf3d0 Sketch free-form curves: Ellipse (centre, major axis end, minor radius), Fit Point and Control Point (degree 3 and 5) Splines, Conic Curve (rho); solved like other curves (points on them, tangency at shared ends, drag fit points), profiled as polylines; mirror/pattern/move/scale copy them; Tangent Arc continues splines and conics 
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-07 22:35:04 +00:00
bherbruckandClaude Opus 5.5 9301bc4210 Sketch projection: Project (edges, face loops, body silhouettes, vertices, other sketches' curves and points, origin, axes, planes), Intersect (body/face/edge section with the sketch plane) and Include 3D Geometry as linked reference geometry: fixed, purple, re-resolved on every recompute (follows upstream edits, keeps ids when the shape is unchanged, flagged when the reference is lost), usable in profiles, constraints and dimensions; Break Link; sketching on a face auto-projects its edges (sketch.auto_project); drawing on a model vertex or edge projects it 
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-07 21:58:18 +00:00
bherbruckandClaude Opus 5.5 b85ccd62cf M1: oracle recipe coverage (arcs, refs-based constraints/dimensions, extents), taper and through-all extrudes, curve splitting in profiles, region merging, angle dimensions by sector, smoother tangency solve, merged topology for revolves 
Oracle: 13/29 parts match Fusion.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
 2026-10-07 18:19:28 +00:00
bherbruckandClaude Opus 5.5 dafce1f4e2 M0: workspace, geometry foundation, sketch constraint solver, kernel boundary 
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
 2026-10-07 17:01:29 +00:00