The old ids live only in crates/engine/src/legacy_ids.rs (the legacy migration table): find_command maps them, so old scripts, recipes and control calls keep working, and saved shortcuts, recent and pinned commands are migrated on load (designs store no command ids). Parity maps the observed catalog ids to ours through xtask/data/fusion-ids.tsv. The agent rule now reads: our own dotted id, never another product's. Cargo.toml's repository points at github.com/bherbruck/solvecraft.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
New kernel file blend_variable.rs. The hooks into blend.rs are visibility
only: plane_normal, vtx, rebuild_face and unsupported are now pub(crate).
- fillet_variable(body, edge, start, r0, r1) works on the same edge
configuration as the constant fillet (straight edge, planar faces, end
faces square to it). The radius runs linearly from the end nearest
`start`, and every section square to the edge is a circular arc. The
blend is an exact degree (2, 1) rational B-spline: arc control points
move linearly.
- fillet_chord(body, edges, chord): the radius per edge comes from its
face angle (chord = 2 r cos(phi/2)).
Fillet feature: style constant | chord | variable {radius2, start};
FusionFilletEdgesCommand takes type, radius2 and start.
Tests:
- Variable 2 -> 5 on a box edge removes (1 - pi/4) L (r0^2 + r0 r1 + r1^2)/3.
Starting from the other end gives the same solid; equal radii give the
constant fillet; too large is refused.
- Chord 4 on a right angle equals radius 4/sqrt(2).
- Engine: both types by command.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
- solvecraft_io::vfs: the engine's file access (disk natively; in the browser an in-memory set of
files the host loads and stores). File commands and write_atomic go through it.
- Web host (apps/solvecraft-web/src/files.rs): stored designs are read from OPFS at start
(storage.persist() asked for) and written back when a command writes one; Save/Save As keep
designs in the browser, exports (STEP, STL, 3MF, OBJ, ...) download as files.
- File > Open shows "Files in this browser": open, insert, rename, download, delete, plus open or
insert from the computer (showOpenFilePicker where there is one, an <input type=file>
otherwise). Files dropped on the page are inserted or opened.
- Unsaved work is autosaved to OPFS and offered again after a reload or crash.
- Start page recents come from the stored designs, with thumbnails. In the browser the samples
are built when opened (a picture blocks the page there, and a kernel panic can't be caught).
- Pages without OPFS (http on a network address, old browsers) keep designs in local storage.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
The standard parts library by type (with its ISO standard), size and length, the size's table
values and a picture of the part; picking a hole's wall or rim seats it there with a rigid joint
(the live preview shows it seated), without a pick it goes at the origin. Opens on
FusionFastenersCommand (and parts.insert); OK runs FusionFastenersCommand. Its own icon.
Insert's world picks (`at`, `point`, `direction`) go through the component frames like other
picks. Tests for the library parsing and the insert parameters; checked in the app: an M3 socket
head cap screw seated in a drilled hole with its joint.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
Kernel extend(body, edges, distance) moves the picked straight edges of a
planar surface outward in its plane, with neighbours meeting them. Doc
feature SurfaceExtend, engine FusionExtendCommand. Tests: 10x10 extended
by 5 past one edge gives 150, past two gives 225; the engine patch, trim,
extend and thicken gives 240.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
Kernel (surfaces):
- Bodies with an open shell are surface bodies (Body::is_surface).
- patch_region: a planar patch of a sketch region. patch_edges: a planar
patch filling a closed loop of a body's edges.
- copy_faces: faces copied out as a surface.
- stitch: sew surfaces along coinciding edges, turning faces to agree; the
result is a solid when it closes.
- trim: cut a surface by a plane or face and keep one side.
- thicken: offset planar and circular-cylindrical faces along their
normals (one side or symmetric) into a solid. Plane copies slide;
cylinder copies scale about the axis, exact for NURBS circles. Free
edges get ruled walls. Faces meeting at a sharp edge are refused.
Doc features Patch, Stitch, Thicken (with operations) and SurfaceTrim;
engine commands FusionSurfacePatchCommand, FusionSurfaceStitchCommand,
FusionSurfaceThickenCommand and FusionSurfaceTrimCommand.
Tests (volumes):
- A 10x10 patch thickened by 2 gives 200, also symmetric.
- Half a cylinder side thickened outward gives half a ring; both halves
inward give the full ring.
- Six faces of a box stitched back give 6000; an open box with its top
patched from the edges, stitched, gives 6000.
- Trim keeps 30 or 70 of 100.
- Engine: patch, trim, thicken gives 140.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
The Split feature takes an optional face tool (FaceAt, the face through a
point on a named body) and splits with kernel split_body, the tool's
surface extended; otherwise the plane as before. Engine test: a box split
by a cylinder's side into the core and the rest.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
- IGES import (kernel iges_in, from the published specification). The file
is restated as STEP and read by the STEP reader, so an IGES file becomes
the same Import base feature.
- Manifold solid B-reps (186/514/510/508/504/502).
- Trimmed (144), bounded (143) and bare B-spline surfaces, sewn into a
solid by shared edges, with face orientation made consistent.
- Curves: lines, arcs, ellipses, composite and rational B-spline curves.
- Surfaces: planes, analytic surfaces 190-198, B-spline surfaces,
surfaces of revolution and tabulated cylinders.
- Transformations, units, colours, names (406 form 15 or labels).
Open, insert and drop .igs/.iges like STEP.
- IGES export (kernel iges_out): each body as a manifold solid B-rep on the
surfaces a STEP export uses, with name properties and colours.
ExportCommand to .igs.
- OBJ import as mesh bodies: objects/groups, polygons fanned, negative
indices, bad lines reported.
- STL: binary files whose header starts with "solid" and those with a zero
triangle count read as binary; non-finite vertices dropped; facet
normals ignored; ASCII with non-UTF-8 names. Mesh bodies get consistent
winding (stray inverted facets turned over).
- Tests: primitives and features round-trip through IGES (volume, area,
name, colour). Six trimmed patches sew into a closed box. Hostile IGES,
OBJ and STL inputs never panic. STL quirks. The engine exports a design
to IGES and opens it again. All 76 oracle parts round-trip through IGES
with matching volume (local check).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
What a component holds moves with its occurrence, and picks in the world land in the
component's frame:
- Sketches and construction planes show where their component is placed (free move, joint
drive, Capture Position); sketch.inspect reports sketch points in the world.
- frames.rs maps a command's world picks into the frame of the body they lie on (through the
inverse of its placement: a moved component or a pasted instance), points that make new
geometry into the active component's frame, and directions with them; instance body names
("Body1 (Pin:2)") become the component's body. Fillet/chamfer edges, shell/offset/draft
faces, face extrude/revolve, sketch on face, holes, sheet metal and plastic picks, primitives,
appearance faces, analyses. Once per command (not again for commands run by commands); the
active-frame fallback stays for commands without a table. Nothing changes while every
placement is the identity.
- component.move_bodies keeps a body where it is in the world (Document.body_offsets: from the
new component's frame to the one it was made in; renames and deleted components follow).
- The UI reads the placed model (Session::world_state) for display, picking, sketch editing and
dialogs; live previews use it once anything is placed.
Tests (engine): sketches and construction planes move (and turn) with the component; world
picks fillet, sketch, hole and make boxes in a moved component; a pick on a pasted instance;
move_bodies keeps the world place there and back; a sketch on a face follows a Move feature.
QA's s34 now runs.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
- Bodies carry a Paint for export (opacity, per-face colours), set by
Document::painted from the appearance model. The paint comes from a
face appearance, a body/component appearance's opacity or a material
look (Glass), and falls back to the paint the body was imported with.
- STEP: faces with colours of their own get a STYLED_ITEM on their
ADVANCED_FACE. See-through looks add SURFACE_STYLE_TRANSPARENT.
Differently coloured pieces are not merged into one face.
- STEP import reads face styles and transparency. The reader tracks the
file face of each kernel face (bands split in two keep it), so imported
face colours land on the right faces; the design shows them through
face_colors.
- 3MF: per-triangle colours (pid/p1 into the base materials, carried
through welding) and the object's alpha (#RRGGBBAA).
- Tests: a blue half-transparent cube with a red top exports, re-imports
with its opacity and the red top face, and keeps it when opened and
exported again. 3MF writes the alpha and the face entry.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
Fusion round trip WARNs on face counts:
- 48: the pulley's annular end faces arrived as 240° and 120° sectors.
- 54: the side faces and holes of a body glued to its mirror image came
in halves.
Changes:
- Planes merge: PLANE faces and flat B-spline sheets, as well as revolved
planes. A plane keeps several loops (an annulus, a face with holes), no
seam. Flat B-spline sheets are written as PLANE.
- Pieces of an extruded cylinder (B-spline sheets) merge when their edges
are circles square to the axis. The merged face is written as a
CYLINDRICAL_SURFACE, with its parameter seam on the face's seam edge.
- A full turn's loop is built explicitly: ring, seam, other ring (or the
apex on the axis), seam back. Before, it depended on edge order, and
after 81c85b5 the pulley's last pieces no longer merged.
- The read-back check moved to the whole file. If the merged file reads
with warnings and the unmerged one does not, the unmerged one is
written.
Results: 48 has 12 faces (Fusion 12), 54 has 12 (Fusion 12). Oracle
results are unchanged (73 PASS) and the STEP corpus passes 76/76. New
test: a plate with a hole glued to its mirror exports 8 faces, all
planes and cylinders, and round-trips.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
