 bherbruckandClaude Opus 5.5
|
a88b8eb6b3
|
SketchConstrainer (applies the constraint one or two entities nearly satisfy) and sketch.toggle_driven (driven/driving dimensions, with over-constraint check)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
|
2026-10-08 00:12:56 +00:00 |
|
|
bherbruckandClaude Opus 5.5
|
cb01314d35
|
3D sketch curves (wires): Include 3D Geometry keeps out-of-plane edges and curves 3D; Project To Surface (curves onto a face along the sketch normal), Intersection Curve (bodies/faces), Isoparametric Curve (u/v or a direction), Spun Profile (a body's outline about an axis) and Fit Curves to Mesh Section; all linked and re-resolved; wires drawn, inspected and deletable
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
|
2026-10-07 23:59:59 +00:00 |
|
|
bherbruckandClaude Opus 5.5
|
6f349b79f5
|
AutoConstrain (from datum, and Finish with AutoConstrain): infers coincident, horizontal/vertical and tangent constraints, then dimensions until fully constrained; Insert DXF (ASCII: lines, arcs, circles, bulged polylines, ellipses, splines, text; $INSUNITS) and Insert SVG (paths with all commands, shapes, transforms, units; Béziers kept exact as splines/conics; text) into sketches; sketch.export_dxf; text outline points hidden (view::sketch_point_visible)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
|
2026-10-07 23:22:28 +00:00 |
|
|
bherbruckandClaude Opus 5.5
|
eb2a5d27b9
|
Scope decisions (in-scope parity headline, deferred tabs), STEP import and kernel notes in ROADMAP/plan
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
|
2026-10-07 23:15:09 +00:00 |
|
|
bherbruckandClaude Opus 5.5
|
54ee20bef4
|
Sketch constraints and dimensions: Curvature (G2, ConstraintSmooth) and Polygon constraints; redundant constraints and dimensions are refused as over-constraining (Fusion behaviour), with driven (reference) dimensions that measure instead; arc length and linear diameter (about a centerline) dimensions; sketch.glyphs (constraint glyph anchors, conflicts) and sketch.snap (coincident/midpoint/on-curve/horizontal/vertical inference); solver damping floor keeps weakly seen variables from flying off
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
|
2026-10-07 23:10:03 +00:00 |
|
|
bherbruckandClaude Opus 5.5
|
6e20038906
|
Sketch Blend Curve (tangent control-point spline between two curve ends) and the Centerline line type (sketch.centerline: left out of profiles, drawn as an axis)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
|
2026-10-07 22:55:34 +00:00 |
|
|
bherbruckandClaude Opus 5.5
|
2491c40fef
|
Sketch Text (MTextCmd, sketch.edit_text): glyph outlines of the embedded Liberation Sans (SIL OFL 1.1, attributed) as lines and conics that close into extrudable profiles; editable text, height, position and angle
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
|
2026-10-07 22:49:49 +00:00 |
|
|
bherbruckandClaude Opus 5.5
|
8d7a0cf3d0
|
Sketch free-form curves: Ellipse (centre, major axis end, minor radius), Fit Point and Control Point (degree 3 and 5) Splines, Conic Curve (rho); solved like other curves (points on them, tangency at shared ends, drag fit points), profiled as polylines; mirror/pattern/move/scale copy them; Tangent Arc continues splines and conics
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
|
2026-10-07 22:35:04 +00:00 |
|
|
bherbruckandClaude Opus 5.5
|
73f68f3f50
|
Sketch tools: Midpoint Line, Tangent Arc, 2-Tangent and 3-Tangent Circle, Center Point Slot, three-point and center-point Arc Slots; Trim, Extend, Break, sketch Fillet (radius dimension), equal/distance-angle/two-distance Chamfers, Offset (chains, side point), Mirror (symmetry constraints), Circular and Rectangular sketch patterns, Sketch Scale, sketch.move (move/rotate/copy)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
|
2026-10-07 22:20:17 +00:00 |
|
|
bherbruckandClaude Opus 5.5
|
f5c2c725c8
|
Extrude/revolve "all profiles" means the drawn ones: auto-projected face edges only count when the drawn curves make no profile
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
|
2026-10-07 21:58:18 +00:00 |
|
|
bherbruckandClaude Opus 5.5
|
9301bc4210
|
Sketch projection: Project (edges, face loops, body silhouettes, vertices, other sketches' curves and points, origin, axes, planes), Intersect (body/face/edge section with the sketch plane) and Include 3D Geometry as linked reference geometry: fixed, purple, re-resolved on every recompute (follows upstream edits, keeps ids when the shape is unchanged, flagged when the reference is lost), usable in profiles, constraints and dimensions; Break Link; sketching on a face auto-projects its edges (sketch.auto_project); drawing on a model vertex or edge projects it
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
|
2026-10-07 21:58:18 +00:00 |
|
|
bherbruckandClaude Opus 5.5
|
97e73b0935
|
Selection feedback and origin: hover and selected highlights (theme tokens), origin planes/axes/point at a fixed screen size with browser eye toggles, click-to-pick sketch planes and faces with camera animation (Finish Sketch returns), multi-select dialog inputs with pre-selection, tangent chains and face-to-edges, window/crossing box selection, shell/draft/mirror/hole dialogs
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
|
2026-10-07 20:00:17 +00:00 |
|
|
bherbruckandClaude Opus 5.5
|
431b87c2b9
|
M1: hole feature (simple, drilled, counterbore, countersink), cone classification and apex counting
Oracle: 19/29 parts match Fusion.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
2026-10-07 19:22:27 +00:00 |
|
|
bherbruckandClaude Opus 5.5
|
3714342737
|
M0: xtask layers, parity, oracle, assets, ci; Fusion command catalog
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
2026-10-07 17:34:53 +00:00 |
|