* feat(geom): surfaces through curve networks, and spline spaces to build them
Adds spline_space (clamped B-spline spaces, Hermite interpolation, exact
embedding by Bézier degree elevation and knot insertion, a monotone cubic
for reparameterising) and network (loft, Coons and Gordon surfaces through
curves in one or two directions, with G1/G2 cross-boundary conditions
against a neighbouring face). Part of #763.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* feat(kernel): boundary surfaces from sketch curves, 3D curves and edges
kernel::boundary_network turns sketch chains, 3D sketch polylines and edge chains
into network curves, gives G1 frames of the faces along open edges
(EdgeFaces), builds the B-spline face (sides split at chain vertices so a
join shares the body's edges) and joins it into a surface body by stitching.
G2 is refused for now (not supported yet). Part of #763.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(kernel): second derivatives of B-spline surfaces in the vendored truck-geometry
BSplineSurface::uuder and vvder multiplied the second differences by p
instead of p·(p − 1), as BSplineCurve::der2 does, so every surface of
degree p ≥ 3 (NURBS too, through its homogeneous surface) reported
1/(p − 1) of its second derivative: a cubic surface's curvature read as
half. This is why a G2 boundary surface on a cylinder measured half the
curvature it carries (#763). New tests hold both to finite differences
for degrees 2 to 5.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* feat(kernel): G2 boundary surfaces against a body's face
The network always carried the face's curvature across a G2 edge; the
refusal came from measuring it with truck's halved surface second
derivatives (fixed in the previous commit). EdgeFaces now reads the
face's second fundamental form from the exact second derivatives
instead of differencing the normal. A new test holds the curvature
across a cylinder's edge to the cylinder's within 0.1%, also with a
sheared far curve; G3 is refused (a network holds up to G2).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* test(kernel): a boundary patch with straight corners measures its own area
A stadium's arcs meet its lines at 180°, so the Coons patch is singular
at its corners. From such a corner the reference mesher's boundary walk
ran onto the B-spline's extrapolation past its domain (a planar spline
passes through every point of its plane there), and the face measured
289 mm² for its 158.5 (#763). The vendored mesher's bounded projection
(nearest_projection, #2043) keeps the walk on the domain; this holds it
there, by the faces, the measuring mesh and the display mesh. The
display path (#1653) was never affected.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* feat(geom,kernel): three-sided boundary surfaces (one side collapsed to a point)
A network curve may be a PointCurve: the apex where the two sides beside
it meet. The curves through it cross it at the point itself, its row of
the net collapses there, and the kernel's face leaves that side out of
its loop (three edges, one vertex at the apex). One point per patch, as
a side; refused elsewhere, when it moves, or with a continuity
condition. Tests: a triangle and a quarter disc filled flat with their
analytic areas (40 mm², 25π), by geom and by the kernel's faces and
meshes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* feat(doc): boundary surfaces through curve networks and loops of three or four
FeatureKind::SurfaceNetwork saves a network as `u` and `v` curves, each
a sketch chain (planar or 3D), a chain of a body's edges with an
optional G1/G2 continuity, or a point (the apex of a three-sided
patch), and an `operation` that can join the surface into the body of
its edges. A SurfaceBoundary of three or four sketch curves, refused
until now, builds as the flat Coons patch of its loop (three collapse
the side opposite the first curve). The format change is one pending
file; feature-walk goldens record the new variant's sketches, bodies
and points.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* feat(engine): surface.boundary through loops of three or four and curve networks
The command keeps its loop form (two to four curves of one sketch; three
and four now build the flat patch of the loop, crown refused there) and
gains a network form: `u` and `v`, each curve a sketch curve id, a
{sketch?, curves} chain (planar or 3D), a {body, edges, continuity?}
edge chain (g1/g2 with the face beside it) or a {point} for a
three-sided patch, with `operation` new or join. Edits may move between
the two forms (timeline.redefine accepts the command now that it has a
dialog).
Tests: analytic areas of loop patches and of a hyperbolic paraboloid
bounded by four 3D lines (every mesh vertex on z = xy/10), a loft
across two sketches, G1 and G2 measured across a cylinder's edge with
inspect.continuity (angle < 0.1°; curvature jump 1e-16 with G2 against
0.027 with G1), 26 hostile networks refused without panicking, and u/v
added to hostile_params_never_panic.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* feat(ui): Boundary Surface dialog
Curves and Cross curves take sketch curves and edges (picks that meet
end to end in one sketch or body are one chain); Continuity and
Operation (New Body or Join). Two to four sketch curves of one sketch
with nothing across are the loop patch; anything else is a network.
Edit Feature brings either back (per-side orders, crown and stations
the dialog does not show are kept). Strings in en, ja and zh.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* docs: ROADMAP M8 and the bridge patch's notes for boundary networks (#763)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* test(oracle): a boundary surface through a loop, thickened (#763)
Case 83: four sketch curves (a square's three sides and a half circle
for its top) make one boundary surface, thickened 2 mm; analytic values
from tools/oracle-analytic/cases_surfaces.py (V = 2A, area 2A + 2P,
centroid by moments). Recipes gain boundary_surface, thicken and remove.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* refactor: boundary surfaces, review cleanups
Project onto the face once per derivative evaluation (the frame is
passed to natural() and reused by scale()), keep each track's
finite-difference step instead of rescanning its table, export the
kernel's edge-pick and chain caps and the default station count for
the engine, doc and dialog to share, map TooLarge spline errors to
KernelError::TooLarge, reuse the engine's operation parser, and skip
the dialog's sketch lookup when the picks are no loop.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
---------
Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Ruled Surface: strips off an edge chain in normal, tangent, angle or direction mode, exact planes/cylinders/cones where possible, mitred or round corners, stitched into one surface body. SurfaceRuled is noted under format 21. Closes#762.
The feature menu of the bottom timeline and the side history gets Copy (the selection, or the right-clicked feature) and Paste (at the marker). Ctrl+click in the bottom timeline toggles a feature in the selection (#1034).
Offsets picked faces along their normals into a new surface body: planes and cylinders move exactly, other faces get a fitted B-spline within tolerance, and offsets that would fold over are refused. Adds the SurfaceOffset feature (noted under format 18), the surface.offset engine command and an Offset Surface dialog.
Closes#758.
Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Surface Loft lofts open or closed curve chains, one section per sketch in pick order, into surface bodies. Adds the SurfaceLoft feature (format 18 note), the surface.loft command, a dialog with Edit Feature support, and kernel and engine tests.
Part of #757.
Surface Sweep carries open curves and closed profile boundaries along a sketch path into surface bodies, with smooth walls along curved point paths. Adds the SurfaceSweep feature (format 18 note), the surface.sweep command, a dialog with Edit Feature support, and kernel and engine tests.
Part of #757.
Surface Revolve turns open curves and closed profile boundaries about a sketch axis into surface bodies, with cone apexes and sphere poles where a chain ends on the axis, and a closed shell made solid. Adds the SurfaceRevolve feature (format 18 note), the surface.revolve command, a dialog with Edit Feature support and analytic kernel and engine tests.
Part of #757.
surface.extrude sweeps open curve chains and profile boundaries along the sketch normal into a surface body (walls only, no caps). Saved under format 17.
Refs #757
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Completes the Japanese catalog (all commands, panels, dialogs and preferences) and routes the remaining hard-coded UI labels through the translation lookup. English stays the default.
The feature history can sit in a panel on the left, with folders that hold one unbroken run of features, drag and drop as one undo step, and a resizable divider. Timeline folders save under format 17.
Cause: the feature buttons are placed by absolute x coordinates and take no layout space, so nothing in the panel could scroll. The playback controls and the feature strip shared one row with no scroll area.
Fix: the feature strip (after the playback controls) is a horizontal ScrollArea. The content width is allocated from the drawn features and joints so the scroll range matches them. Clicks, drags, the history marker, and context menus work inside the scrolled strip; the playback controls stay fixed.
Tests: cargo xtask ci passes. Checked by hand in the app with a long feature list. Not covered: auto-scroll while dragging a feature or the marker past the visible edge.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
The old ids live only in crates/engine/src/legacy_ids.rs (the legacy migration table): find_command maps them, so old scripts, recipes and control calls keep working, and saved shortcuts, recent and pinned commands are migrated on load (designs store no command ids). Parity maps the observed catalog ids to ours through xtask/data/fusion-ids.tsv. The agent rule now reads: our own dotted id, never another product's. Cargo.toml's repository points at github.com/bherbruck/solvecraft.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
What a component holds moves with its occurrence, and picks in the world land in the
component's frame:
- Sketches and construction planes show where their component is placed (free move, joint
drive, Capture Position); sketch.inspect reports sketch points in the world.
- frames.rs maps a command's world picks into the frame of the body they lie on (through the
inverse of its placement: a moved component or a pasted instance), points that make new
geometry into the active component's frame, and directions with them; instance body names
("Body1 (Pin:2)") become the component's body. Fillet/chamfer edges, shell/offset/draft
faces, face extrude/revolve, sketch on face, holes, sheet metal and plastic picks, primitives,
appearance faces, analyses. Once per command (not again for commands run by commands); the
active-frame fallback stays for commands without a table. Nothing changes while every
placement is the identity.
- component.move_bodies keeps a body where it is in the world (Document.body_offsets: from the
new component's frame to the one it was made in; renames and deleted components follow).
- The UI reads the placed model (Session::world_state) for display, picking, sketch editing and
dialogs; live previews use it once anything is placed.
Tests (engine): sketches and construction planes move (and turn) with the component; world
picks fillet, sketch, hole and make boxes in a moved component; a pick on a pasted instance;
move_bodies keeps the world place there and back; a sketch on a face follows a Move feature.
QA's s34 now runs.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
ASSEMBLE panel (SOLID, SHEET METAL, PLASTIC): New Component, Joint, As-built Joint, Joint Origin,
Rigid Group, Drive Joints, Motion Link, Interference. Joint origins are picked by hovering:
faces snap to their centre (round faces to the centre of the nearer end), edges to their middle
(round edges to their centre), vertices to themselves, shown as glyphs with their z axis. The
Joint dialog has the motion type, angle, offsets X/Y/Z, flip, per-value limits and Animate (the
preview plays the motion); joints and drives preview on the placed model (world states).
Drive Joints moves live with a slider. Interference lists the overlaps and shows them red.
Joints appear in the timeline and in a Browser Joints folder (edit, drive, suppress, delete).
SHEET METAL tab in Fusion's layout: Flange (base, edge or contour, from the picks; height arrow
on the canvas), Hem, Unfold, Refold, Convert to Sheet Metal, Sheet Metal Rules (rule manager),
Create Flat Pattern (flat view with up/down bend lines, bend table, DXF export).
PLASTIC tab with SETUP: Boss, Lip/Groove, Snap Fit, Rest, Manage and Assign Plastic Rules; Rib,
Web and the shared solid commands on the tab.
Every feature dialog has live preview, Edit Feature and pre-selection; icons drawn in code.
Toolbar layout per tab in workspace.rs; tests for the dialog to command mapping.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
Edit Sketch rolls the timeline back to just after the sketch and faces it;
Finish Sketch, Esc (once nothing else is left to cancel) and editing another
feature all leave it, restoring the marker and the previous view. Editing the
open sketch again is a no-op and editing another sketch switches cleanly.
The control channel's ui.click takes double: true.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
Export: ExportCommand/CLI --out/MCP export with .3mf write a 3MF Core package
([Content_Types].xml, _rels/.rels, 3D/3dmodel.model; millimetres), one
mesh object and build item per body, named after it, vertices shared and
welded watertight (T-junctions between faces split), base-material colours
when bodies carry one (STEP colours now ride on bodies). Tessellation as
for STL. File > Export 3MF.
Import: doc.open/drag-drop/CLI/MCP open accept .3mf and .stl; Insert Mesh
(ParaMeshInsertAlignCommand) adds them to a design as a MeshImport feature.
Kernel mesh bodies render, measure exactly, move and export; solid
features refuse them with a clear error. 3MF reading flattens components
and build transforms, converts units, reads colours; sizes, entries,
nesting and element counts are capped.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
Import base feature (FeatureKind::Import, timeline type BaseFeature) holding
the STEP text and the file's product tree; bodies named from the file.
doc.open accepts .step/.stp (any case) as a new design; Insert STEP
(FusionImportCommandFromToolbar) adds one to the current design; File menu,
SOLID > INSERT, drag-and-drop (insert into a non-empty design, else open),
'solvecraft part.step', MCP open. Features (fillet, hole, sketch-on-face
cut, shell) work on imported bodies. Imports are cached so a file is read
once per command. Measure tightens its chord tolerance for small radii.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
cronos