1b-agent/OneCAD
1
0 Fork 0
forked from 1b-agent/solidcraft-upstream
Code Pull Requests Activity
571 Commits 16 Branches 33 Tags
d8beaedfa4c0f0961e4e9b917f294f0ac25d70bd
Commit Graph
14 Commits
Author SHA1 Message Date
bherbruck 4e39869023 Merge pull request #179 from tbreckle/fix/177-centerline-to-construction 
fix(sketch): a centerline can be switched straight to construction
 2026-10-11 16:46:04 -04:00
tbreckle 6dc6372b13 fix(sketch): a centerline can be switched straight to construction 
sketch.construction set `construction` but left `centerline` on, so the
curve stayed a centerline (drawn dash-dot, still marked as an axis) until
it was first switched back to normal. Making a curve construction now
clears its centerline flag, mirroring sketch.centerline.
 2026-10-11 20:40:21 +02:00
lillith 1adb2cd69f fix: accept two line picks for sketch coincidence 2026-10-11 20:34:04 +02:00
CypherNaugh_0x 5d5ff44db2 Drawing connects to existing points: a new point landing exactly on an existing point (the origin too) gets a coincident constraint in the engine, for every drawing command and every caller (MCP, scripts, clicks), in the same undo step; connect: false opts out. Re-tying an existing coincident returns it ("existing": true) instead of failing; the UI's after-the-fact tie_snaps is gone 2026-10-10 12:08:19 -04:00
bherbruckandClaude Opus 5.5 d10312b7fd Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs 
The old ids live only in crates/engine/src/legacy_ids.rs (the legacy migration table): find_command maps them, so old scripts, recipes and control calls keep working, and saved shortcuts, recent and pinned commands are migrated on load (designs store no command ids). Parity maps the observed catalog ids to ours through xtask/data/fusion-ids.tsv. The agent rule now reads: our own dotted id, never another product's. Cargo.toml's repository points at github.com/bherbruck/solvecraft.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
 2026-10-09 12:17:23 +00:00
bherbruckandClaude Opus 5.5 a3d9eec238 Test: a pipe along 3D sketch curves ends square to the path (its end cap may reach past the end point) 
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-08 09:42:34 +00:00
bherbruckandClaude Opus 5.5 d40ef5bbdc 3D sketch: with 3D Sketch on, the Line, Spline and Point tools take points off the sketch plane, snapping to model vertices, edges and faces and to drawn 3D points (segments that stay on the plane are ordinary sketch lines); drawn 3D curves are wires with fit points (sketch.line3d, sketch.spline3d: centripetal Catmull-Rom, sketch.point3d), a clicked 3D point gets a move triad (drag along X/Y/Z or parallel to the sketch plane: sketch.move3d, joined ends move together), Delete removes it; sweep and pipe paths may mix 3D curves with sketch curves; control: ui.triad, ui.worldToScreen 
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-08 08:39:22 +00:00
bherbruckandClaude Opus 5.5 d2068e07a3 Selection inside sketches: double-click a curve selects the chain joined to it end to end (sketch.chain; shared or coincident ends), dimensions and constraint glyphs are selectable like other entities (Sel::SketchConstraint: Ctrl/Shift toggle, window and crossing boxes take them, Delete removes them with the rest), boxes leave out the origin, and the selection filter has sketch curves, points, dimensions and constraints 
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-08 08:39:22 +00:00
bherbruckandClaude Opus 5.5 f6b42f8750 Sketch drag feel like Fusion (sketch.drag): the grabbed point goes exactly to the cursor, a line (spline, conic) slides with it, a circle or arc grabbed on its edge changes radius about its centre (an ellipse its minor radius), the centre moves the circle; the grabbed geometry is held while the rest moves as little as it can; fixed and fully constrained geometry stays. Dragging a curve of the sketch being edited now drags it (it used to start a box selection). Tests for per-entity fully-constrained feedback 
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-08 07:50:35 +00:00
bherbruckandClaude Opus 5.5 bbd0a19260 Sketch Palette, docked at the right while sketching: line type of the selected curves (normal, construction, centerline), Look At, and options kept with each sketch (sketch.options: Sketch Grid, Snap, Slice, Show Profile, Show Points, Show Dimensions, Show Constraints, Show Projected Geometries, 3D Sketch), the degrees of freedom, Finish Sketch. Slice cuts the model at the sketch plane; Snap off places points at the cursor 
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-08 07:50:35 +00:00
bherbruckandClaude Opus 5.5 7f9a8f2afd Two-entity constraints move only the second pick (tangent, parallel, perpendicular, equal, concentric, coincident, collinear, symmetric, midpoint): the constraint is applied with the first entity held (solve_holding), the second keeping its size where it can (lines turn and slide, circles translate), then resizing; if the second is fixed, projected or fully constrained the first moves instead, and if neither can the constraint is refused and nothing changes; later solves hold nothing. Context-menu constraints keep the selection order; a curve picked before a point puts the point on the curve 
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-08 06:39:38 +00:00
bherbruckandClaude Opus 5.5 7757e6d9c7 Construction toggle on every curve type: the selection switches as a whole (slots, polygons; to construction unless all already are), projected curves too; construction curves are drawn dashed and centerlines dash-dot; profiles update at once 
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-08 05:36:15 +00:00
bherbruckandClaude Opus 5.5 5b8816aa7d Fix/Unfix on every sketch entity: points (Fix constraint) and lines, arcs, circles, ellipses, splines and conics (fixed curves hold their points and radius); ConstraintFix takes entities (fixes them all unless all are fixed); the toolbar button and the context menu act on the whole selection; fixed points never move when dragged or solved; projected geometry counts as fixed; fixed geometry is drawn green; sketch.inspect reports fixed 
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-08 05:12:13 +00:00
bherbruckandClaude Opus 5.5 187ffd0a03 Sketch dimensions drawn as dimensions: extension lines, dimension lines and arcs with arrowheads (flipped outside when tight), the value centred on the line (fx: for expressions), R/Ø leaders, angle arcs, arc-length mark, driven ones in parentheses in a muted colour; click selects, Delete removes, drag moves the text (sketch.dimension_text, kept relative to the dimension), double-click edits the value in place with parameter completion 
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-08 04:44:24 +00:00