* claim: #1801
* Insert SVG: the file picker opens on SVG files (#1801)
Every Open went through one host picker whose filters start with designs, CAD
files and meshes, so Insert SVG (and Insert DXF) in a sketch opened on STEP,
IGES and meshes, and the SVG file had to be found under another filter.
The host's pick_open now takes the extensions the command reads and offers
them as the picker's first, default filter. Insert SVG and Insert DXF pass
their type; every other Open passes none and keeps the list it had. The
browser host ignores them (it shows its own file panel).
---------
Co-authored-by: MateuszSychXpl <151755914+MateuszSychXpl@users.noreply.github.com>
SolidCraft read the HID device directly, which bypasses spacenavd and
everything set in spnavcfg (swapped and inverted axes, sensitivity, dead
zones). When the daemon's socket is there it is read instead, with a fixed
32-byte record decoder and no library; without it the hidraw path is
unchanged. The daemon sends a record only when values change, so its
readings are held until the next one rather than going stale.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
FreeCAD .FCStd and Rhino .3dm files open, insert and drop like STEP and IGES:
cadmpeg (Apache-2.0, pinned =0.6.1, native builds only) detects the format,
decodes it under its service resource caps, validates the model and writes it
as STEP AP214, which becomes an Import feature in a new component named after
the file, with the up and names options.
Only the fcstd, rhino and step codecs are compiled in (no default features).
ACIS is left out: cadmpeg's sat codec is a ShapeManager stream decoder.
native_cad.rs is the single importer seam. Self-made FreeCAD and Rhino box
fixtures, hostile-input, ZIP-bomb and cap tests, engine tests for the
component path; the browser build reports these formats as not supported.
A note under design format 23 says an Import's file can name these formats.
Co-authored-by: Jacob Oursland <jacob.oursland@gmail.com>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The web app reads a 3D mouse through the Gamepad API and drives the camera through navigation::device, so it follows each page's navigation capabilities (#1336).
Co-authored-by: CamWight <CamWight@users.noreply.github.com>
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
glTF files open, insert and drop like 3MF/STL/OBJ: a component named after the file, the node tree as nested rigid components, repeated meshes as occurrences, metres to mm, Y up turned to Z up by default (up: z keeps axes), materials as PBR appearances. Bounded, hostile-input tested reader; no new persisted data. Closes#1505.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Agent chat prototype: drive an ACP agent the user already has from a side panel
A desktop-only chat panel (off by default) that starts a coding agent over the
Agent Client Protocol and gives it SolidCraft's MCP server, bridged to the open
window through the token-protected control channel with the default folder
limits. It finds installed agents (Claude Code and Codex adapters, Gemini CLI,
Copilot, Qwen, OpenCode, goose) with version and login state, streams text,
tool calls and plans, shows the agent's permission requests, and when an agent
isn't signed in shows its own login methods without handling any credential.
Design notes and findings: docs/design/in-app-agent-chat.md.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* docs: say only what the end-to-end run showed
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Agent chat: gate, one undo per message, docking, process groups, discovery polish
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Agent chat: Settings → AI, several agents with a switcher, OpenAI-compatible endpoints, permission modes, toolbar button
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Agent chat: translations, tool cards, Add agent dialog fixes, test agent saves on its own
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Agent chat: third-party licences for the keychain crates; clippy
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Agent chat: badge text from the theme tokens
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Agent chat: Auto-allow model edits is the default permission mode
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Windows: resize border from the first frame, DPI-correct window moves (#1381)
- The egui resize zones were laid out after the start page's early return, so a launch without
a design had no resize edges at all. They now run on every page.
- Windows: the main window's procedure answers WM_NCHITTEST with the resize edges and corners,
Windows' own border width at the window's DPI (8 px at 100 %), so the OS shows its resize
cursors and runs its own resize (snap included) from the first message; no egui zones there.
- Windows: WM_GETDPISCALEDSIZE returns the size winit then applies (same logical size), so the
rect the OS suggests while the title bar is dragged onto a monitor with another scale is the
rect the window gets.
- Zone sizes and hit test shared in titlebar.rs and unit-tested; Windows CI checks the hit test
right after launch and a real edge drag.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Windows resize smoke: find the main window by its title
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Windows resize smoke: probe the maximized window at the screen's edge
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
One docked Save as mesh dialog replaces Export STL / 3MF / 3MF with face tags, with an optional Send to slicer that lists the slicers installed on this machine. Engine: file.save_mesh and file.slicers; the Convert Mesh dialog goes (mesh.convert and the MeshConvert feature stay, so existing designs open). Strings in all catalogs; screenshots in the PR. Checked on main + this branch: cargo check --workspace, the engine slicer/mesh/file tests, the UI catalog and menu tests and scenario s14 (the one local colour-token failure is epaint's TexturesDelta panic, which main shows on this machine too).
Without a 3DxWare profile, Linux now uses the driver's object-mode mapping (physical Ry and Rz swapped and reversed), so a tilt rolls and a twist spins. Windows and macOS are unchanged; a profile still takes precedence. Fixes#1172.
The empty design shown at launch, New on a design that is still empty, file.new and the blank design left when the last tab closes all take the Units of new designs preference. Opened files and the sample part keep their own units. Fixes#1205.
Co-authored-by: raythurman2386 <raythurman2386@users.noreply.github.com>
The preview builds only the tool; the boolean runs once on OK, off the window thread, with a Computing label while it takes a while. Follow-up to #1020.
A crash inside a graphics driver left only "an unclean exit between
commands": no backtrace, no module, no hint that it was at startup.
- The crash journal now keeps the startup step the app is in (window,
graphics instance, surface, adapter request, adapter chosen, device
creation, renderer and viewport shader compiles, surface configure,
first frame and its present, running) and the renderer as soon as the
adapter is picked. egui-wgpu tells the app about its steps through a
small hook. An unclean exit before the first frame names the step.
- Windows: an unhandled-exception filter (src/native_crash.rs, the one
Windows-only module allowed unsafe) writes the exception code, the
faulting module and offset, and a minidump next to the journal; the
next start puts them into the report.
- The Windows CI job runs a child that faults on purpose and checks the
report.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Windows: start Direct3D 12 first, and Vulkan only without a D3D12 GPU
wgpu started Vulkan, D3D12 and OpenGL together and preferred Vulkan, so
every Windows start loaded all installed Vulkan drivers. An old Intel
Vulkan driver (igvk64.dll) crashed 0.10.1 at startup inside the driver.
The app now probes D3D12, then Vulkan, then OpenGL, one backend at a
time, and starts only the first with a hardware adapter (WARP when none
has one). WGPU_BACKEND still wins; graphics.json's "backend" sets the
order by hand; the software renderer (safe mode, the retry) uses D3D12
alone. A new Windows CI job starts the real app under several settings.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* CI: a test filter YAML parses
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* CI: the startup smoke test writes graphics.json where the app reads it
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* CI: run the WARP shader tests one at a time
WARP's shader JIT (d3d10warp.dll) crashed twice in 124 runs of the gpu
tests with four test threads, with a null read inside its own optimizer
while several devices compiled compute pipelines at once. Serial runs
did not crash.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Open and Save use parented AsyncFileDialog sheets; their answers run on the UI thread in a later frame, so resizing the window while a picker is open no longer re-enters winit and aborts. Editors, tab changes, Close/Quit and model-changing control requests wait for the answer; the local library Open and Export in the Appearance dialog use the same flow. Fixes#1088.
Startup no longer stops at a bad settings file or a missing GPU: a settings file that fails to load is set aside, a failed GPU start retries with the software renderer, and a safe mode starts with defaults. Adds a troubleshooting page to the guide.
Where SolidCraft can replace itself safely, the Update window gets Update now:
- AppImage: the new AppImage is downloaded next to the old one, verified and renamed over
it; Restart now starts it as SolidCraft exits.
- Windows MSI: the verified .msi starts (msiexec /i … /passive) once SolidCraft has closed,
after the usual questions about unsaved designs.
- Windows portable zip / standalone exe: the running solidcraft.exe is renamed to .old, the
new one takes its name (solidcraft-cli.exe too), Restart now; .old goes at the next start.
- macOS: the verified .dmg is opened (the app is ad-hoc signed and not notarized, so it isn't
replaced behind the user's back).
- Flatpak, Snap, deb, rpm, tar.gz: never replaced; the window shows the command.
Every package's SHA-256 must match the release's SHA256SUMS.txt (HTTPS, same release); a
mismatch deletes the download and changes nothing. With PUBLIC_KEY set in update/install.rs,
SHA256SUMS.txt.minisig must also verify (minisign-verify, MIT) with a trusted comment naming
the release. release.yml signs the list when the UPDATE_SIGNING_KEY secret exists and fails
when the app expects signatures but the secret is missing; docs/releasing.md has the steps.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
At start, and at most once a day, a background thread asks GitHub for the latest stable
release (one HTTPS GET to releases/latest, nothing else sent; 15 s timeout; silent when
offline; GitHub's rate limit respected). When it is newer than this build, an Update button
appears next to Report a bug. It opens a window with the version, the release notes and
Download (the asset that fits this installation), Skip this version and Remind me later.
- Versions compare as semver; a nightly counts as the release it was built after, so it is
offered only a newer stable release.
- The installation is detected (AppImage, Flatpak, Snap from the store or a file, deb, rpm,
tar.gz, Windows MSI/portable/exe, macOS app); Download picks the fixed-name asset.
Development builds and the Flatpak (no network permission) never check.
- Preferences > General > Updates: Check for updates automatically (on) and Check now.
- HTTP via ureq + rustls with the operating system's certificates (desktop app only).
- docs: Updates and privacy page.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
macOS hands files opened from Finder, the Dock or open -a to the application delegate's application:openURLs:, which winit's delegate lacks, so AppKit showed "SolidCraft cannot open files in the SolidCraft design format". open_documents adds that method to the delegate's class before launch finishes and queues the paths for the UI, which opens them like files named on the command line.
This is the one place SolidCraft's own code uses unsafe: the app crate denies unsafe_code instead of forbidding it, and only the two macOS-only functions in open_documents.rs allow it, with the reason documented there and in AGENTS.md. Adapted from VectorCraft (see ATTRIBUTION.md).
Closes#997.
Closing a socket with unread input resets the connection, and the reset could reach the client before the refusal did (requests_run_only_after_the_token failed 17 times in 100). The server now ends its side and drains, briefly and up to 64 KiB, what the client had sent before closing: 0 in 100.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The app's control protocol gets engine.batch: the steps run in one request (so one frame), each as engine.execute runs it, stopping at the first failure and rolling back to the checkpoint by default. The MCP batch tool sends it to a running app (with the control token), is never resent after a lost reply, and falls back to step-by-step when the app refuses (agent cursor shown, or a step loads a file). A batch may take up to an hour to answer.
solidcraft --control PORT writes a random per-launch token to a user-only file (<data>/control/PORT.token; 0700/0600 on Unix, icacls on Windows; SOLIDCRAFT_CONTROL_TOKEN overrides) and refuses any connection whose first request lacks it. mcp --connect, the demo and packaging smoke clients send it. MCP execute/batch/open/save/export/screenshot are annotated destructive and open-world, new_design destructive. Docs: control-protocol.md, mcp.md, AGENTS.md, pending release note in releasing.md.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Flatpak app id, desktop/metainfo/MIME file names, icon name and the window's Wayland app_id / X11 class are now ai.storyteller.solidcraft, the id the ArtCraft launcher expects.
Existing Flatpak installs move over: the Pages repo marks app/ai.storyteller.solvecraft end-of-life with a rebase to the new id, so flatpak update offers the switch and Flatpak carries ~/.var/app along. A new install next to the old one copies settings and autosaves on first launch through a read-only grant on the old data folder. The metainfo declares <replaces>/<provides>, the desktop entry X-Flatpak-RenamedFrom, and AppImages drop the menu entry an older AppImage installed. deb/rpm upgrades remove the old-named files.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Nomad