A PR that saves something new adds crates/doc/src/format/pending/<name>.rs (a note, and an upgrade step if older designs must be rewritten). The build writes the next format number while changes are pending and lists them in format_pending; scripts/fold-format-pending.sh fixes them as v<N>/ at release time. Formats 23 and 24 move into v23/ and v24/.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Clippy, the test archive and the test shards cover the packages a PR changes plus their dependents. Main, nightly and manual runs stay full.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
An Edge Flange feature can set the shape and size of the relief at the corners its flanges make, in place of the sheet metal rule's. Design format 24.
Co-authored-by: NOWN-DEV <NOWN-DEV@users.noreply.github.com>
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Adds File > Export > Current View as DXF: the visible bodies projected from the current camera onto 2D LINE/LWPOLYLINE entities, with hidden edges omitted or dashed.
Co-authored-by: cronos <19868002+crono2250@users.noreply.github.com>
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
FreeCAD .FCStd and Rhino .3dm files open, insert and drop like STEP and IGES:
cadmpeg (Apache-2.0, pinned =0.6.1, native builds only) detects the format,
decodes it under its service resource caps, validates the model and writes it
as STEP AP214, which becomes an Import feature in a new component named after
the file, with the up and names options.
Only the fcstd, rhino and step codecs are compiled in (no default features).
ACIS is left out: cadmpeg's sat codec is a ShapeManager stream decoder.
native_cad.rs is the single importer seam. Self-made FreeCAD and Rhino box
fixtures, hostile-input, ZIP-bomb and cap tests, engine tests for the
component path; the browser build reports these formats as not supported.
A note under design format 23 says an Import's file can name these formats.
Co-authored-by: Jacob Oursland <jacob.oursland@gmail.com>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Thin extrude caps are certified by the curves the wall follows, so a sketch attached to a cap survives switching between solid and thin (#1519).
Co-Authored-By: Philipp Bischoff <PhilippBischoff0@users.noreply.github.com>
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Motion links can carry a coupling (gear pair, rack and pinion, screw) whose ratio follows radii, picked round faces or pitch. Design format 23.
Co-authored-by: SychPL <SychPL@users.noreply.github.com>
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
The web app reads a 3D mouse through the Gamepad API and drives the camera through navigation::device, so it follows each page's navigation capabilities (#1336).
Co-authored-by: CamWight <CamWight@users.noreply.github.com>
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Adds an Interface font setting that leads the proportional family, with the default face and CJK/Hangul fallbacks kept behind it (#1290).
Co-authored-by: DuBearte <DuBearte@users.noreply.github.com>
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
A field the definition doesn't have is refused with the fields it does have, instead of reporting success and changing nothing (#1491).
Co-Authored-By: Erikas <erkexzcx@users.noreply.github.com>
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
glTF files open, insert and drop like 3MF/STL/OBJ: a component named after the file, the node tree as nested rigid components, repeated meshes as occurrences, metres to mm, Y up turned to Z up by default (up: z keeps axes), materials as PBR appearances. Bounded, hostile-input tested reader; no new persisted data. Closes#1505.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Copy, cut and paste sketch geometry (Ctrl+C/X/V, context menu)
Sketch geometry had no copy or paste: Ctrl+C / Ctrl+X / Ctrl+V arrive as
clipboard events that nothing handled, and the sketch context menu had no
Copy, Cut or Paste.
- sketch.copy / sketch.cut / sketch.paste: lines, arcs, circles, ellipses,
splines, conics, points and text. Constraints and dimensions wholly among
the copied entities come along (each dimension gets its own parameter
with the same expression); ones that reach outside, fixes and pattern or
offset relations are dropped. Paste goes centred at `at`, by
`translate`, or offset from the original (same sketch) / at the same
coordinates (another sketch, on its plane). One undo step; the pasted
geometry is selected.
- Ctrl+C / Ctrl+X / Ctrl+V in a sketch (paste at the cursor), and Cut,
Copy and Paste in the sketch context menu. Outside a sketch Ctrl+C /
Ctrl+V copy and paste the selected timeline features. A copy also puts a
line of text on the system clipboard so the next Ctrl+V is delivered.
Fixes#1480
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Keep a pasted text's height and angle expressions, drop its place's
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Checked locally on main merged with this: cargo check --workspace and the ui-egui tests (the only failures are the local-only TexturesDelta ones that main has too).
The product preview asked the viewport executor for the full physical
viewport, so a maximised 4K window (~8 MP) was refused against the 4 MP
limit on every frame. The preview now draws at the largest size of the
same aspect the executor admits (RenderLimits::fit, scratch included)
and filters it up into the viewport through the existing offscreen
blit. Viewports within the limits still draw at full size.
PNG setups past the image limits now say what the limits are and the
largest size at that aspect, and the image panel offers to use it.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A sketch text's height, place (x and y) and angle can each be an expression over the design's parameters, and the text follows parameter changes, undo and reopening. Closes#1362.
Co-authored-by: NOWN-DEV <NOWN-DEV@users.noreply.github.com>
The flat pattern now keeps a 2D view of its own, driven by navigation::handle with orbit off,
so pan, zoom to the cursor and reverse zoom follow the navigation preset. Input over it no
longer reaches the Design camera, and Fit and Home frame the pattern. Closes#1483.
* Chamfer: refuse a result that grew a convex edge's part (or shrank a concave one's)
A chamfer of a curved edge that runs off a face it skims (robustness seed 57's
ball rim) built a part bigger than before. Checked from the two faces' normals
at the edge; rounds and unclear angles are left to the wedge bound.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Action matrix: the sheet metal tray's relief corners refuse a 0.25 mm chamfer
Each is a 2.5 mm concave edge (the corner of a corner relief, between two
planes at right angles): a chamfer there fills at most 0.25²/2 × 2.5 = 0.08
mm³. What was built took 0.95 mm³ away; the chamfer guard now refuses it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Robustness goldens: seed 57's wrong-way chamfer is now refused (#1390)
On main with #391, seed 57's chamfer grew the part; this refuses it, so the run goes on
to its later steps and ends ok.
---------
Co-authored-by: Phanoob <phanoob@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* Agent chat prototype: drive an ACP agent the user already has from a side panel
A desktop-only chat panel (off by default) that starts a coding agent over the
Agent Client Protocol and gives it SolidCraft's MCP server, bridged to the open
window through the token-protected control channel with the default folder
limits. It finds installed agents (Claude Code and Codex adapters, Gemini CLI,
Copilot, Qwen, OpenCode, goose) with version and login state, streams text,
tool calls and plans, shows the agent's permission requests, and when an agent
isn't signed in shows its own login methods without handling any credential.
Design notes and findings: docs/design/in-app-agent-chat.md.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* docs: say only what the end-to-end run showed
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Agent chat: gate, one undo per message, docking, process groups, discovery polish
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Agent chat: Settings → AI, several agents with a switcher, OpenAI-compatible endpoints, permission modes, toolbar button
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Agent chat: translations, tool cards, Add agent dialog fixes, test agent saves on its own
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Agent chat: third-party licences for the keychain crates; clippy
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Agent chat: badge text from the theme tokens
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Agent chat: Auto-allow model edits is the default permission mode
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A motion link's ratio is read in b's units per a's (mm per degree, degrees per mm) when an angle and a distance are linked; stored values stay per radian, so saved designs are unchanged. Follow-up to #1415.
Co-authored-by: SychPL <SychPL@users.noreply.github.com>
Adds a bounded normalization path for PNG16 and ICC-bearing JPEG texture inputs, producing float RGBA with recorded color and orientation decisions.
Co-authored-by: 0xlillith <0xlillith@users.noreply.github.com>
Adds a read-only review window to Validate Physical Material Data: paste a schema-1 card, see its known properties in SI units, unknown ones marked, with stated conditions and source claims. Nothing is assigned or saved.
Co-authored-by: 0xlillith <0xlillith@users.noreply.github.com>
* Render preview uses the shared camera navigation
The Render workspace's product preview had its own hard-coded camera
controls. Camera input now lives in one component, navigation::handle,
which the modelling viewport and the Render preview both call (NavCaps:
orbit, pick). Render gets the navigation preset, Orbit around, zoom to the
cursor, the middle double-click and the axis view or navigation cube.
Flat pages can call it with orbit off. A test rejects pages that read the
wheel or move the camera themselves.
Fixes#1454
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Render panel hint says the camera moves as in Design
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The continuity core (kernel bridge: Hermite control rows reproducing a support surface's position, tangent, curvature and change of curvature, G0 to G3), surface.blend between two edge chains (#764), and a crown for fitted patches. Existing patches and fillets are unchanged by default (crown 0 is the plain patch bit for bit). SurfaceBlend and Patch.crown are noted under format 22.
A point within the point tolerance of a boundary curve's end is that end in the boolean, whatever its parameter, so text cuts no longer leave unmatched sliver vertices (#391). Robustness goldens re-recorded for seeds 0, 34, 39, 41 and 57 with reasons.
Every other package (AppImage, deb, rpm, tar, Flatpak, Snap, MSI, portable zip, FreeBSD) already
puts solidcraft-cli next to the app; the macOS bundle only had it in a separate zip. The agent
chat starts it as its agent's MCP server and looks for it beside the running program.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: the first dimension scales a sketch drawn by eye (#1365)
Lines drawn by eye have no size of their own until a dimension gives them one, but the first
dimension kept every other drawn length and distorted the sketch to fit (a free construction
line through the origin turned instead of the shape moving). The dimension tool now scales
the whole sketch about its origin to the first length dimension, as long as nothing in the
sketch fixes a size yet: no other driving length dimension, nothing fixed, projected or
patterned. Every geometric constraint and angle holds on the scaled sketch. Later
dimensions size what they measure as before; sketch.dimension does this only with
scale_sketch: true, so scripts are unchanged.
Fixes#1365
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Scenario s01: dimension the box's height too, now that the first dimension scales the sketch
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Material-card validation now names the exact condition fields missing for each property (missing_condition_fields), alongside the existing unspecified_conditions.
Co-authored-by: 0xlillith <0xlillith@users.noreply.github.com>
