 bherbruckandClaude Opus 5.5
|
fa8da64613
|
Context menus: radial marking menu in the viewport (Repeat on top, Undo, Delete, Press Pull, Create Sketch, Extrude, Move/Copy, Hole; right press-and-hold or a right drag on the ring flicks to pick), contextual lists for faces, edges, bodies, sketch entities (construction, fix, applicable constraints) and empty space; browser menus for bodies, sketches and components; rename box, Properties window; body.rename and sketch.redefine commands; ui.menu / ui.menuPick / ui.rename control methods
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
|
2026-10-08 01:38:52 +00:00 |
|
|
bherbruckandClaude Opus 5.5
|
1988594a13
|
Section Analysis (FusionHalfSectionViewCommand, INSPECT): cut the view by an origin plane, construction plane or planar face with an offset (drag arrow) and flip; the inside of cut bodies shows a flat cap colour; live while the dialog is open, Remove Section on the right-click menu; viewport shader validated in a test
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
|
2026-10-08 00:45:44 +00:00 |
|
|
bherbruckandClaude Opus 5.5
|
b5051b2744
|
Rib and Web (to the next face or a depth, flip), Emboss/deboss on planar faces (EmbossCmd), Replace Face onto a parallel plane or face, Align (point to point, face to face), Remove (SoftDeleteCommand), timeline Copy/Paste of features (independent copies: own dimension parameters and input names, references remapped, optional translation)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
|
2026-10-08 00:42:26 +00:00 |
|
|
bherbruckandClaude Opus 5.5
|
dd7485503a
|
Parameters: unit-aware parameters (an inch parameter reads bare numbers as inches), atan2/mod/trunc and clearer unit errors, cycle paths (a → b → a), rename with every reference following (expressions, feature inputs, dimensions, favourites, comments), deletes refused with the list of users, parameter errors shown on the features using them, parameters.add/rename/delete/comment/users/graph/complete and expr.evaluate; ChangeParameterCommand renames and favourites; hostile test no longer writes stray files
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
|
2026-10-08 00:15:22 +00:00 |
|
|
bherbruckandClaude Opus 5.5
|
beab69cfb2
|
Measure tool (I): pick one or two vertices, edges or faces for length/area/position, minimum distance with ΔX/ΔY/ΔZ and a line in the view, and the angle between planar faces or straight edges (MeasureCommand items, engine test); theme switch from the control channel no longer leaves stale scene colours
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
|
2026-10-07 23:54:36 +00:00 |
|
|
bherbruckandClaude Opus 5.5
|
6f349b79f5
|
AutoConstrain (from datum, and Finish with AutoConstrain): infers coincident, horizontal/vertical and tangent constraints, then dimensions until fully constrained; Insert DXF (ASCII: lines, arcs, circles, bulged polylines, ellipses, splines, text; $INSUNITS) and Insert SVG (paths with all commands, shapes, transforms, units; Béziers kept exact as splines/conics; text) into sketches; sketch.export_dxf; text outline points hidden (view::sketch_point_visible)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
|
2026-10-07 23:22:28 +00:00 |
|
|
bherbruckandClaude Opus 5.5
|
54ee20bef4
|
Sketch constraints and dimensions: Curvature (G2, ConstraintSmooth) and Polygon constraints; redundant constraints and dimensions are refused as over-constraining (Fusion behaviour), with driven (reference) dimensions that measure instead; arc length and linear diameter (about a centerline) dimensions; sketch.glyphs (constraint glyph anchors, conflicts) and sketch.snap (coincident/midpoint/on-curve/horizontal/vertical inference); solver damping floor keeps weakly seen variables from flying off
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
|
2026-10-07 23:10:03 +00:00 |
|
|
bherbruckandClaude Opus 5.5
|
b3ca8911eb
|
Holes at sketch points (one feature, many holes, following the points) and threaded holes; cosmetic threads (FusionThreadCommand, ISO metric, model.threads); components groundwork: the document is a component tree (New Component, Create Components from Bodies, active component, component.list)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
|
2026-10-07 23:00:57 +00:00 |
|
|
bherbruckandClaude Opus 5.5
|
73f68f3f50
|
Sketch tools: Midpoint Line, Tangent Arc, 2-Tangent and 3-Tangent Circle, Center Point Slot, three-point and center-point Arc Slots; Trim, Extend, Break, sketch Fillet (radius dimension), equal/distance-angle/two-distance Chamfers, Offset (chains, side point), Mirror (symmetry constraints), Circular and Rectangular sketch patterns, Sketch Scale, sketch.move (move/rotate/copy)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
|
2026-10-07 22:20:17 +00:00 |
|
|
bherbruckandClaude Opus 5.5
|
b2b9331415
|
Drag manipulators and automatic operation: extrude (two arrows when symmetric), fillet/chamfer, shell and move arrows drag their value with round-step snapping (Alt/Ctrl: free) and the dialog follows; Extrude operation "auto" (engine) and the dialog follow the geometry: into a body cuts (red), out of one joins, free space makes a new body; a manual choice sticks
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
|
2026-10-07 21:58:43 +00:00 |
|
|
bherbruckandClaude Opus 5.5
|
9301bc4210
|
Sketch projection: Project (edges, face loops, body silhouettes, vertices, other sketches' curves and points, origin, axes, planes), Intersect (body/face/edge section with the sketch plane) and Include 3D Geometry as linked reference geometry: fixed, purple, re-resolved on every recompute (follows upstream edits, keeps ids when the shape is unchanged, flagged when the reference is lost), usable in profiles, constraints and dimensions; Break Link; sketching on a face auto-projects its edges (sketch.auto_project); drawing on a model vertex or edge projects it
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
|
2026-10-07 21:58:18 +00:00 |
|
|
bherbruckandClaude Opus 5.5
|
7ef3426cb3
|
Keyboard-first commands: E/F/H open with the on-canvas value box focused as soon as the geometry is picked (typing replaces the value, Enter applies, Tab moves on, Esc cancels), extrude direction arrow; Extrude takes planar body faces (face: [x,y,z] copies the face boundary into a sketch), so select-face-then-E press-pulls; join/cut previews show the tool body (cut see-through red)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
|
2026-10-07 21:23:47 +00:00 |
|
|
bherbruckandClaude Opus 5.5
|
cdca1e59f3
|
M0: engine command registry, file formats, view math and CPU renderer
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
2026-10-07 17:30:37 +00:00 |
|