{
 "description": "Bike front triangle (lofted tubes joined to a bottom-bracket cylinder): the display mesh drew a flat triangle inside the down tube bend at Fine/Ultra.",
 "commands": [
  {
   "command": "sketch.create",
   "params": {
    "plane": {
     "origin": [
      12,
      0.0,
      18
     ],
     "x_dir": [
      0.0,
      1.0,
      0.0
     ],
     "y_dir": [
      -0.947,
      0.0,
      -0.322
     ]
    },
    "name": "S13"
   }
  },
  {
   "command": "sketch.ellipse",
   "params": {
    "center": [
     0,
     0
    ],
    "major": [
     19.0,
     0
    ],
    "minor_radius": 18.0
   }
  },
  {
   "command": "sketch.finish",
   "params": {}
  },
  {
   "command": "sketch.create",
   "params": {
    "plane": {
     "origin": [
      -13.0,
      0.0,
      91.5
     ],
     "x_dir": [
      0.0,
      1.0,
      0.0
     ],
     "y_dir": [
      -0.947,
      0.0,
      -0.322
     ]
    },
    "name": "S14"
   }
  },
  {
   "command": "sketch.ellipse",
   "params": {
    "center": [
     0,
     0
    ],
    "major": [
     27.0,
     0
    ],
    "minor_radius": 24.0
   }
  },
  {
   "command": "sketch.finish",
   "params": {}
  },
  {
   "command": "sketch.create",
   "params": {
    "plane": {
     "origin": [
      -38,
      0.0,
      165
     ],
     "x_dir": [
      0.0,
      1.0,
      0.0
     ],
     "y_dir": [
      -0.959,
      0.0,
      -0.282
     ]
    },
    "name": "S15"
   }
  },
  {
   "command": "sketch.ellipse",
   "params": {
    "center": [
     0,
     0
    ],
    "major": [
     24.0,
     0
    ],
    "minor_radius": 22.0
   }
  },
  {
   "command": "sketch.finish",
   "params": {}
  },
  {
   "command": "sketch.create",
   "params": {
    "plane": {
     "origin": [
      -76.646,
      0.0,
      320.0
     ],
     "x_dir": [
      0.0,
      1.0,
      0.0
     ],
     "y_dir": [
      -0.97,
      0.0,
      -0.242
     ]
    },
    "name": "S16"
   }
  },
  {
   "command": "sketch.circle.center",
   "params": {
    "center": [
     0,
     0
    ],
    "radius": 20.0
   }
  },
  {
   "command": "sketch.finish",
   "params": {}
  },
  {
   "command": "sketch.create",
   "params": {
    "plane": {
     "origin": [
      -110.577,
      0.0,
      456.089
     ],
     "x_dir": [
      0.0,
      1.0,
      0.0
     ],
     "y_dir": [
      -0.97,
      0.0,
      -0.242
     ]
    },
    "name": "S17"
   }
  },
  {
   "command": "sketch.circle.center",
   "params": {
    "center": [
     0,
     0
    ],
    "radius": 19.0
   }
  },
  {
   "command": "sketch.finish",
   "params": {}
  },
  {
   "command": "solid.loft",
   "params": {
    "sections": [
     {
      "sketch": "S13"
     },
     {
      "sketch": "S14"
     },
     {
      "sketch": "S15"
     },
     {
      "sketch": "S16"
     },
     {
      "sketch": "S17"
     }
    ],
    "operation": "new",
    "name": "SeatTube",
    "body_name": "SeatTube"
   }
  },
  {
   "command": "solid.cylinder",
   "params": {
    "diameter": 46,
    "height": 73.0,
    "base": [
     0,
     -36.5,
     0
    ],
    "axis": "Y",
    "operation": "new",
    "name": "BBShell",
    "body_name": "BBShell"
   }
  },
  {
   "command": "sketch.create",
   "params": {
    "plane": {
     "origin": [
      459.471,
      0.0,
      607.143
     ],
     "x_dir": [
      0.0,
      1.0,
      0.0
     ],
     "y_dir": [
      0.349,
      0.0,
      -0.937
     ]
    },
    "name": "S10"
   }
  },
  {
   "command": "sketch.ellipse",
   "params": {
    "center": [
     0,
     0
    ],
    "major": [
     22.0,
     0
    ],
    "minor_radius": 20.0
   }
  },
  {
   "command": "sketch.finish",
   "params": {}
  },
  {
   "command": "sketch.create",
   "params": {
    "plane": {
     "origin": [
      181.44,
      0.0,
      503.572
     ],
     "x_dir": [
      0.0,
      1.0,
      0.0
     ],
     "y_dir": [
      0.349,
      0.0,
      -0.937
     ]
    },
    "name": "S11"
   }
  },
  {
   "command": "sketch.ellipse",
   "params": {
    "center": [
     0,
     0
    ],
    "major": [
     27.0,
     0
    ],
    "minor_radius": 23.0
   }
  },
  {
   "command": "sketch.finish",
   "params": {}
  },
  {
   "command": "sketch.create",
   "params": {
    "plane": {
     "origin": [
      -96.592,
      0.0,
      400.0
     ],
     "x_dir": [
      0.0,
      1.0,
      0.0
     ],
     "y_dir": [
      0.349,
      0.0,
      -0.937
     ]
    },
    "name": "S12"
   }
  },
  {
   "command": "sketch.ellipse",
   "params": {
    "center": [
     0,
     0
    ],
    "major": [
     17.0,
     0
    ],
    "minor_radius": 16.0
   }
  },
  {
   "command": "sketch.finish",
   "params": {}
  },
  {
   "command": "solid.loft",
   "params": {
    "sections": [
     {
      "sketch": "S10"
     },
     {
      "sketch": "S11"
     },
     {
      "sketch": "S12"
     }
    ],
    "operation": "new",
    "name": "TopTube",
    "body_name": "TopTube"
   }
  },
  {
   "command": "sketch.create",
   "params": {
    "plane": {
     "origin": [
      501.231,
      0.0,
      519.592
     ],
     "x_dir": [
      0.0,
      1.0,
      0.0
     ],
     "y_dir": [
      -0.903,
      0.0,
      -0.431
     ]
    },
    "name": "S1"
   }
  },
  {
   "command": "sketch.circle.center",
   "params": {
    "center": [
     0,
     0
    ],
    "radius": 32.0
   }
  },
  {
   "command": "sketch.finish",
   "params": {}
  },
  {
   "command": "sketch.create",
   "params": {
    "plane": {
     "origin": [
      473.678,
      0.0,
      577.358
     ],
     "x_dir": [
      0.0,
      1.0,
      0.0
     ],
     "y_dir": [
      -0.903,
      0.0,
      -0.431
     ]
    },
    "name": "S2"
   }
  },
  {
   "command": "sketch.circle.center",
   "params": {
    "center": [
     0,
     0
    ],
    "radius": 28.0
   }
  },
  {
   "command": "sketch.finish",
   "params": {}
  },
  {
   "command": "sketch.create",
   "params": {
    "plane": {
     "origin": [
      447.417,
      0.0,
      632.416
     ],
     "x_dir": [
      0.0,
      1.0,
      0.0
     ],
     "y_dir": [
      -0.903,
      0.0,
      -0.431
     ]
    },
    "name": "S3"
   }
  },
  {
   "command": "sketch.circle.center",
   "params": {
    "center": [
     0,
     0
    ],
    "radius": 26.0
   }
  },
  {
   "command": "sketch.finish",
   "params": {}
  },
  {
   "command": "solid.loft",
   "params": {
    "sections": [
     {
      "sketch": "S1"
     },
     {
      "sketch": "S2"
     },
     {
      "sketch": "S3"
     }
    ],
    "operation": "new",
    "name": "HeadTube",
    "body_name": "HeadTube"
   }
  },
  {
   "command": "sketch.create",
   "params": {
    "plane": {
     "origin": [
      8,
      0.0,
      3
     ],
     "x_dir": [
      0.0,
      1.0,
      0.0
     ],
     "y_dir": [
      -0.178,
      0.0,
      0.984
     ]
    },
    "name": "S4"
   }
  },
  {
   "command": "sketch.rectangle.rounded",
   "params": {
    "p0": [
     -19.0,
     -18.0
    ],
    "p1": [
     19.0,
     18.0
    ],
    "radius": 10.799999999999999
   }
  },
  {
   "command": "sketch.finish",
   "params": {}
  },
  {
   "command": "sketch.create",
   "params": {
    "plane": {
     "origin": [
      80,
      0.0,
      16
     ],
     "x_dir": [
      0.0,
      1.0,
      0.0
     ],
     "y_dir": [
      -0.211,
      0.0,
      0.977
     ]
    },
    "name": "S5"
   }
  },
  {
   "command": "sketch.rectangle.rounded",
   "params": {
    "p0": [
     -30.0,
     -26.0
    ],
    "p1": [
     30.0,
     26.0
    ],
    "radius": 15.6
   }
  },
  {
   "command": "sketch.finish",
   "params": {}
  },
  {
   "command": "sketch.create",
   "params": {
    "plane": {
     "origin": [
      175,
      0.0,
      40
     ],
     "x_dir": [
      0.0,
      1.0,
      0.0
     ],
     "y_dir": [
      -0.596,
      0.0,
      0.803
     ]
    },
    "name": "S6"
   }
  },
  {
   "command": "sketch.rectangle.rounded",
   "params": {
    "p0": [
     -38.0,
     -33.0
    ],
    "p1": [
     38.0,
     33.0
    ],
    "radius": 19.8
   }
  },
  {
   "command": "sketch.finish",
   "params": {}
  },
  {
   "command": "sketch.create",
   "params": {
    "plane": {
     "origin": [
      314.248,
      0.0,
      271.657
     ],
     "x_dir": [
      0.0,
      1.0,
      0.0
     ],
     "y_dir": [
      -0.857,
      0.0,
      0.515
     ]
    },
    "name": "S7"
   }
  },
  {
   "command": "sketch.rectangle.rounded",
   "params": {
    "p0": [
     -37.0,
     -33.0
    ],
    "p1": [
     37.0,
     33.0
    ],
    "radius": 19.8
   }
  },
  {
   "command": "sketch.finish",
   "params": {}
  },
  {
   "command": "sketch.create",
   "params": {
    "plane": {
     "origin": [
      422.553,
      0.0,
      451.835
     ],
     "x_dir": [
      0.0,
      1.0,
      0.0
     ],
     "y_dir": [
      -0.857,
      0.0,
      0.515
     ]
    },
    "name": "S8"
   }
  },
  {
   "command": "sketch.rectangle.rounded",
   "params": {
    "p0": [
     -33.0,
     -30.0
    ],
    "p1": [
     33.0,
     30.0
    ],
    "radius": 18.0
   }
  },
  {
   "command": "sketch.finish",
   "params": {}
  },
  {
   "command": "sketch.create",
   "params": {
    "plane": {
     "origin": [
      484.441,
      0.0,
      554.793
     ],
     "x_dir": [
      0.0,
      1.0,
      0.0
     ],
     "y_dir": [
      -0.857,
      0.0,
      0.515
     ]
    },
    "name": "S9"
   }
  },
  {
   "command": "sketch.rectangle.rounded",
   "params": {
    "p0": [
     -23.0,
     -22.0
    ],
    "p1": [
     23.0,
     22.0
    ],
    "radius": 13.2
   }
  },
  {
   "command": "sketch.finish",
   "params": {}
  },
  {
   "command": "solid.loft",
   "params": {
    "sections": [
     {
      "sketch": "S4"
     },
     {
      "sketch": "S5"
     },
     {
      "sketch": "S6"
     },
     {
      "sketch": "S7"
     },
     {
      "sketch": "S8"
     },
     {
      "sketch": "S9"
     }
    ],
    "operation": "new",
    "name": "DownTube",
    "body_name": "DownTube"
   }
  },
  {
   "command": "solid.combine",
   "params": {
    "target": "SeatTube",
    "tools": [
     "BBShell"
    ],
    "operation": "join"
   }
  },
  {
   "command": "solid.combine",
   "params": {
    "target": "SeatTube",
    "tools": [
     "TopTube"
    ],
    "operation": "join"
   }
  },
  {
   "command": "solid.combine",
   "params": {
    "target": "SeatTube",
    "tools": [
     "HeadTube"
    ],
    "operation": "join"
   }
  },
  {
   "command": "solid.combine",
   "params": {
    "target": "SeatTube",
    "tools": [
     "DownTube"
    ],
    "operation": "join"
   }
  },
  {
   "command": "body.rename",
   "params": {
    "body": "SeatTube",
    "name": "FrontTriangle"
   }
  }
 ]
}