# Fusion command parity

Generated by `cargo xtask parity` from `xtask/data/fusion-catalog.tsv` (the toolbar commands of Fusion's Design workspace, ids and names only) and the live command registry (`solvecraft-cli commands`). A command counts as live when SolveCraft registers the same command id. This measures breadth, not depth; see ROADMAP.md and docs/oracle.md for depth.

**SOLID + SKETCH: 57 / 291 commands live (20%).** All Design tabs: 137 / 1175 (12%). Registered commands: 78.

| Tab | Panel | Live | Total | % |
|---|---|---:|---:|---:|
| SOLID | CREATE | 13 | 35 | 37% |
| SOLID | MODIFY | 10 | 32 | 31% |
| SOLID | ASSEMBLE | 0 | 21 | 0% |
| SOLID | CONFIGURE | 0 | 3 | 0% |
| SOLID | CONSTRUCT | 2 | 20 | 10% |
| SOLID | INSPECT | 1 | 25 | 4% |
| SOLID | INSERT | 0 | 11 | 0% |
| SOLID | SELECT | 0 | 15 | 0% |
| SOLID | POSITION | 0 | 2 | 0% |
| SKETCH | CREATE | 16 | 41 | 39% |
| SKETCH | MODIFY | 2 | 12 | 17% |
| SKETCH | CONSTRAINTS | 11 | 15 | 73% |
| SKETCH | CONFIGURE | 0 | 3 | 0% |
| SKETCH | INSPECT | 1 | 25 | 4% |
| SKETCH | INSERT | 0 | 13 | 0% |
| SKETCH | ASSEMBLE | 0 | 1 | 0% |
| SKETCH | SELECT | 0 | 15 | 0% |
| SKETCH | FINISH SKETCH | 1 | 2 | 50% |
| SURFACE | CREATE | 4 | 25 | 16% |
| SURFACE | MODIFY | 7 | 26 | 27% |
| SURFACE | ASSEMBLE | 0 | 20 | 0% |
| SURFACE | CONFIGURE | 0 | 3 | 0% |
| SURFACE | CONSTRUCT | 2 | 20 | 10% |
| SURFACE | INSPECT | 1 | 25 | 4% |
| SURFACE | INSERT | 0 | 11 | 0% |
| SURFACE | SELECT | 0 | 15 | 0% |
| SURFACE | POSITION | 0 | 2 | 0% |
| MESH | CREATE | 0 | 5 | 0% |
| MESH | PREPARE | 0 | 4 | 0% |
| MESH | MODIFY | 4 | 30 | 13% |
| MESH | ASSEMBLE | 0 | 21 | 0% |
| MESH | CONFIGURE | 0 | 3 | 0% |
| MESH | CONSTRUCT | 2 | 20 | 10% |
| MESH | INSPECT | 1 | 25 | 4% |
| MESH | INSERT | 0 | 10 | 0% |
| MESH | SELECT | 0 | 10 | 0% |
| MESH | EXPORT | 0 | 1 | 0% |
| MESH | POSITION | 0 | 2 | 0% |
| FORM | CREATE | 1 | 14 | 7% |
| FORM | MODIFY | 2 | 31 | 6% |
| FORM | SYMMETRY | 0 | 6 | 0% |
| FORM | UTILITIES | 0 | 5 | 0% |
| FORM | CONSTRUCT | 2 | 20 | 10% |
| FORM | INSPECT | 1 | 25 | 4% |
| FORM | INSERT | 0 | 13 | 0% |
| FORM | ASSEMBLE | 0 | 1 | 0% |
| FORM | SELECT | 0 | 15 | 0% |
| FORM | FINISH FORM | 0 | 1 | 0% |
| SHEET METAL | CREATE | 6 | 19 | 32% |
| SHEET METAL | MODIFY | 6 | 21 | 29% |
| SHEET METAL | ASSEMBLE | 0 | 20 | 0% |
| SHEET METAL | CONFIGURE | 0 | 3 | 0% |
| SHEET METAL | CONSTRUCT | 2 | 20 | 10% |
| SHEET METAL | INSPECT | 1 | 25 | 4% |
| SHEET METAL | INSERT | 0 | 11 | 0% |
| SHEET METAL | SELECT | 0 | 15 | 0% |
| SHEET METAL | REFOLD | 0 | 1 | 0% |
| SHEET METAL | POSITION | 0 | 2 | 0% |
| PLASTIC | SETUP | 0 | 2 | 0% |
| PLASTIC | CREATE | 13 | 35 | 37% |
| PLASTIC | MODIFY | 10 | 32 | 31% |
| PLASTIC | ASSEMBLE | 0 | 20 | 0% |
| PLASTIC | CONFIGURE | 0 | 3 | 0% |
| PLASTIC | CONSTRUCT | 2 | 20 | 10% |
| PLASTIC | INSPECT | 1 | 26 | 4% |
| PLASTIC | INSERT | 0 | 11 | 0% |
| PLASTIC | SELECT | 0 | 15 | 0% |
| PLASTIC | POSITION | 0 | 2 | 0% |
| ASSEMBLY | INSERT | 0 | 8 | 0% |
| ASSEMBLY | CREATE | 3 | 8 | 38% |
| ASSEMBLY | RELATIONSHIPS | 0 | 11 | 0% |
| ASSEMBLY | MOTION | 0 | 3 | 0% |
| ASSEMBLY | MODIFY | 4 | 11 | 36% |
| ASSEMBLY | CONTACT | 0 | 2 | 0% |
| ASSEMBLY | CONFIGURE | 0 | 3 | 0% |
| ASSEMBLY | CONSTRUCT | 2 | 20 | 10% |
| ASSEMBLY | INSPECT | 1 | 25 | 4% |
| ASSEMBLY | SELECT | 0 | 15 | 0% |
| ASSEMBLY | POSITION | 0 | 2 | 0% |
| MANAGE | ASSIGN | 0 | 1 | 0% |
| MANAGE | RELEASE | 0 | 2 | 0% |
| MANAGE | BOM | 0 | 2 | 0% |
| MANAGE | PROCESS MANAGEMENT | 0 | 3 | 0% |
| MANAGE | TASK MANAGEMENT | 0 | 3 | 0% |
| UTILITIES | MODELING TOOLS | 0 | 1 | 0% |
| UTILITIES | MAKE | 0 | 1 | 0% |
| UTILITIES | NEST | 0 | 1 | 0% |
| UTILITIES | ADD-INS | 0 | 2 | 0% |
| UTILITIES | UTILITY | 1 | 3 | 33% |
| UTILITIES | INSPECT | 1 | 24 | 4% |
| UTILITIES | CREATE PMI | 0 | 4 | 0% |
| UTILITIES | SELECT | 0 | 15 | 0% |
| UTILITIES | POSITION | 0 | 2 | 0% |

## Live (SOLID, SKETCH)

- SOLID › CREATE › Create Sketch (`SketchCreate`)
- SOLID › CREATE › Extrude (`Extrude`)
- SOLID › CREATE › Revolve (`Revolve`)
- SOLID › CREATE › Sweep (`Sweep`)
- SOLID › CREATE › Loft (`SolidLoft`)
- SOLID › CREATE › Hole (`FusionHoleCommand`)
- SOLID › CREATE › Box (`PrimitiveBox`)
- SOLID › CREATE › Cylinder (`PrimitiveCylinder`)
- SOLID › CREATE › Sphere (`PrimitiveSphere`)
- SOLID › CREATE › Torus (`PrimitiveTorus`)
- SOLID › CREATE › Rectangular Pattern (`PatternRectangular`)
- SOLID › CREATE › Circular Pattern (`PatternCircular`)
- SOLID › CREATE › Mirror (`MirrorCommand`)
- SOLID › MODIFY › Fillet (`FusionFilletEdgesCommand`)
- SOLID › MODIFY › Chamfer (`FusionChamferCommand`)
- SOLID › MODIFY › Shell (`FusionShellBodyCommand`)
- SOLID › MODIFY › Draft (`FusionDraftCommand`)
- SOLID › MODIFY › Combine (`FusionCombineCommand`)
- SOLID › MODIFY › Split Body (`FusionSplitBodyCommand`)
- SOLID › MODIFY › Move/Copy (`FusionMoveCommand`)
- SOLID › MODIFY › Delete (`FusionDeleteCommand`)
- SOLID › MODIFY › Change Parameters (`ChangeParameterCommand`)
- SOLID › MODIFY › Compute All (`FusionComputeAllCommand`)
- SOLID › CONSTRUCT › Offset Plane (`ConstructionPlaneOffsetFromPlaneCommand`)
- SOLID › CONSTRUCT › Plane at Angle (`ConstructionPlaneAtAngleCommand`)
- SOLID › INSPECT › Measure (`MeasureCommand`)
- SKETCH › CREATE › Line (`DrawPolyline`)
- SKETCH › CREATE › 2-Point Rectangle (`ShapeRectangleTwoPoint`)
- SKETCH › CREATE › 3-Point Rectangle (`ShapeRectangleThreePoint`)
- SKETCH › CREATE › Center Rectangle (`ShapeRectangleCenter`)
- SKETCH › CREATE › Center Diameter Circle (`CircleCenterRadius`)
- SKETCH › CREATE › 2-Point Circle (`CircleTwoPoint`)
- SKETCH › CREATE › 3-Point Circle (`CircleThreePoint`)
- SKETCH › CREATE › 3-Point Arc (`ArcThreePoint`)
- SKETCH › CREATE › Center Point Arc (`ArcCenterTwoPoint`)
- SKETCH › CREATE › Circumscribed Polygon (`ShapePolygonCircumscribed`)
- SKETCH › CREATE › Inscribed Polygon (`ShapePolygonInscribed`)
- SKETCH › CREATE › Edge Polygon (`ShapePolygonEdge`)
- SKETCH › CREATE › Center to Center Slot (`ShapeSlotCenterToCenter`)
- SKETCH › CREATE › Overall Slot (`ShapeSlotOverall`)
- SKETCH › CREATE › Point (`DrawPoint`)
- SKETCH › CREATE › Sketch Dimension (`SketchDimension`)
- SKETCH › MODIFY › Move/Copy (`FusionMoveCommand`)
- SKETCH › MODIFY › Change Parameters (`ChangeParameterCommand`)
- SKETCH › CONSTRAINTS › Horizontal/Vertical (`ConstraintHorizontalVertical`)
- SKETCH › CONSTRAINTS › Coincident (`ConstraintCoincident`)
- SKETCH › CONSTRAINTS › Tangent (`ConstraintTangent`)
- SKETCH › CONSTRAINTS › Equal (`ConstraintEqual`)
- SKETCH › CONSTRAINTS › Parallel (`ConstraintParallel`)
- SKETCH › CONSTRAINTS › Perpendicular (`ConstraintPerpendicular`)
- SKETCH › CONSTRAINTS › Fix/UnFix (`ConstraintFix`)
- SKETCH › CONSTRAINTS › MidPoint (`ConstraintMidPoint`)
- SKETCH › CONSTRAINTS › Concentric (`ConstraintConcentric`)
- SKETCH › CONSTRAINTS › Collinear (`ConstraintCollinear`)
- SKETCH › CONSTRAINTS › Symmetry (`ConstraintSymmetry`)
- SKETCH › INSPECT › Measure (`MeasureCommand`)
- SKETCH › FINISH SKETCH › Finish Sketch (`SketchStop`)

## Not yet (SOLID, SKETCH)

- SOLID › CREATE › Create Form (`TSplineBaseFeatureCreationCommand`)
- SOLID › CREATE › Derive (`PushDeriveCommand`)
- SOLID › CREATE › Automated Modeling (`AutomatedModelingCommand`)
- SOLID › CREATE › Rib (`FusionRibCommand`)
- SOLID › CREATE › Web (`FusionWebCommand`)
- SOLID › CREATE › Emboss (`EmbossCmd`)
- SOLID › CREATE › Thread (`FusionThreadCommand`)
- SOLID › CREATE › Coil (`PrimitiveCoil`)
- SOLID › CREATE › Pipe (`PrimitivePipe`)
- SOLID › CREATE › Bounding Solid (`StockModelCommand`)
- SOLID › CREATE › Pattern on Path (`PatternOnPath`)
- SOLID › CREATE › Geometric Pattern (`FusionPatternGeometricCommand`)
- SOLID › CREATE › Thicken (`FusionSurfaceThickenCommand`)
- SOLID › CREATE › Boundary Fill (`SurfaceSculpt`)
- SOLID › CREATE › Find Features (`FusionFindFeaturesCommand`)
- SOLID › CREATE › Fluid Volume (`EnclosureCommand`)
- SOLID › CREATE › Create Base Feature (`BaseFeatureCreationCommand`)
- SOLID › CREATE › Create Linked PCB (`PCBExternalComponentCreationCmd`)
- SOLID › CREATE › Derive PCB (`PCBDeriveCmd`)
- SOLID › CREATE › Create Unlinked PCB (`PCBCreateCmd`)
- SOLID › CREATE › Joint Origin (`JointOrigin`)
- SOLID › CREATE › Generate Timeline (`TimelineBuilderCommand`)
- SOLID › MODIFY › Press Pull (`FusionPressPullCommand`)
- SOLID › MODIFY › Edit Face (`EditFaceCommand`)
- SOLID › MODIFY › Scale (`ModifyScale`)
- SOLID › MODIFY › Offset Face (`FusionOffsetFacesCommand`)
- SOLID › MODIFY › Replace Face (`FusionReplaceFaceCommand`)
- SOLID › MODIFY › Split Face (`FusionSplitFaceCommand`)
- SOLID › MODIFY › Silhouette Split (`FusionPartingLineSplitCmd`)
- SOLID › MODIFY › Align (`AlignCmd`)
- SOLID › MODIFY › Remove (`SoftDeleteCommand`)
- SOLID › MODIFY › Arrange (`ArrangeCommand`)
- SOLID › MODIFY › Remove Features (`FusionRemoveFeaturesCommand`)
- SOLID › MODIFY › Remove Faces (`FusionRemoveFacesCommand`)
- SOLID › MODIFY › Replace with Primitives (`ReplaceWithPrimitivesCommand`)
- SOLID › MODIFY › Volumetric Lattice (`VolFieldCreateLatticeCommand`)
- SOLID › MODIFY › Volumetric Texture (`VolFieldTextureCommand`)
- SOLID › MODIFY › VolFieldModifyModelCommand (`VolFieldModifyModelCommand`)
- SOLID › MODIFY › Physical Material (`PhysicalMaterialCommand`)
- SOLID › MODIFY › Appearance (`AppearanceCommand`)
- SOLID › MODIFY › Manage Materials (`MaterialCommand`)
- SOLID › MODIFY › Compute Unresolved (`FusionComputeUnresolvedCommand`)
- SOLID › MODIFY › Convert (`TSpline2BRepCommand`)
- SOLID › MODIFY › Bill of Materials (`MaterializedBomHybridCmd`)
- SOLID › ASSEMBLE › Insert Component (`FusionImportCommandFromToolbar`)
- SOLID › ASSEMBLE › New Component (`FusionCreateNewComponentCommand`)
- SOLID › ASSEMBLE › Duplicate With Joints (`FusionDuplicateWithJointsCommand`)
- SOLID › ASSEMBLE › Constrain Components (`AssemblyMateCommand`)
- SOLID › ASSEMBLE › Align Constraint (`AlignConstraintCmd`)
- SOLID › ASSEMBLE › Angle Constraint (`AngleConstraintCmd`)
- SOLID › ASSEMBLE › Center Constraint (`MidplaneConstraintCmd`)
- SOLID › ASSEMBLE › Tangent Constraint (`TangentConstraintCmd`)
- SOLID › ASSEMBLE › Joint Constraint (`JointConstraintCmd`)
- SOLID › ASSEMBLE › Joint (`JointAssembleCmdNew`)
- SOLID › ASSEMBLE › As-Built Joint (`JointAsBuiltCmd`)
- SOLID › ASSEMBLE › As-Built Constraint (`AsBuiltConstraintCmd`)
- SOLID › ASSEMBLE › Rigid Group (`RigidGroupCmd`)
- SOLID › ASSEMBLE › Drive Joints (`FusionMoveJointsCommand`)
- SOLID › ASSEMBLE › Motion Link (`FusionMotionRelationshipCommand`)
- SOLID › ASSEMBLE › Motion Study (`FusionMotionStudyCommand`)
- SOLID › ASSEMBLE › Enable Contact Sets (`EnableContactSetsCmd`)
- SOLID › ASSEMBLE › Enable All Contact (`EnableAllContactCmd`)
- SOLID › ASSEMBLE › Disable Contact (`DisableAllContactCmd`)
- SOLID › ASSEMBLE › New Contact Set (`ContactSetCmd`)
- SOLID › CONFIGURE › Configure (`FusionStartDesignConfigModeCmd`)
- SOLID › CONFIGURE › Display Configuration Table (`FusionShowDesignConfigPanelCmd`)
- SOLID › CONFIGURE › Create Configuration Rules (`FusionConfigurationRulesCmd`)
- SOLID › CONSTRUCT › User Coordinate System (UCS) (`CoordinateSystemCommand`)
- SOLID › CONSTRUCT › Tangent Plane (`ConstructionTangentPlaneCommand`)
- SOLID › CONSTRUCT › Midplane (`ConstructionMidPlaneCommand`)
- SOLID › CONSTRUCT › Perpendicular Plane (`ConstructionPlanePerpendicularToPlaneCommand`)
- SOLID › CONSTRUCT › Plane Through Two Edges (`ConstructionPlaneFromTwoEdgesCommand`)
- SOLID › CONSTRUCT › Plane Through Three Points (`ConstructionPlaneFromThreePointsCommand`)
- SOLID › CONSTRUCT › Plane Along Path (`ConstructionPlaneAlongPathCommand`)
- SOLID › CONSTRUCT › Axis Through Cylinder/Cone/Torus (`ConstructionAxisThroughCylinderCommand`)
- SOLID › CONSTRUCT › Axis Perpendicular To Face (`ConstructionAxisNormalToFaceCommand`)
- SOLID › CONSTRUCT › Axis Through Two Planes (`ConstructionAxisFromTwoPlanesCommand`)
- SOLID › CONSTRUCT › Axis Through Two Points (`ConstructionAxisThroughTwoPointsCommand`)
- SOLID › CONSTRUCT › Axis Through Edge (`ConstructionAxisThroughEdgeCommand`)
- SOLID › CONSTRUCT › Point At Vertex (`ConstructionPointFromPointCommand`)
- SOLID › CONSTRUCT › Point Through Two Edges (`ConstructionPointThroughTwoEdgesCommand`)
- SOLID › CONSTRUCT › Point Through Three Planes (`ConstructionPointFromThreePlanesCommand`)
- SOLID › CONSTRUCT › Point At Center Of Circle/Sphere/Torus (`ConstructionPointFromCircleOrSphereCommand`)
- SOLID › CONSTRUCT › Point At Edge And Plane (`ConstructionPointAtEdgeAndPlaneCommand`)
- SOLID › CONSTRUCT › Point Along Path (`ConstructionPointAlongPathCommand`)
- SOLID › INSPECT › Interference (`InterferenceCheckCommand`)
- SOLID › INSPECT › Section Analysis (`FusionHalfSectionViewCommand`)
- SOLID › INSPECT › Curvature Comb Analysis (`FusionCurvatureCombAnalysisCommand`)
- SOLID › INSPECT › Curvature Map Analysis (`FusionCurvatureMapAnalysisCommand`)
- SOLID › INSPECT › Draft Analysis (`FusionDraftAnalysisCommand`)
- SOLID › INSPECT › Environment Map Analysis (`FusionEnvironmentMapAnalysisCommand`)
- SOLID › INSPECT › Isocurve Analysis (`FusionIsoCurveAnalysisCommand`)
- SOLID › INSPECT › Validate (`FusionSurfaceValidateCommand`)
- SOLID › INSPECT › Zebra Analysis (`FusionZebraAnalysisCommand`)
- SOLID › INSPECT › Accessibility Analysis (`FusionAccessibilityAnalysisCommand`)
- SOLID › INSPECT › Center of Mass (`FusionCenterOfMassCommand`)
- SOLID › INSPECT › Minimum Radius Analysis (`FusionMinimumRadiusAnalysisCommand`)
- SOLID › INSPECT › Component Connection Analysis (`FusionComponentConnectionAnalysisCommand`)
- SOLID › INSPECT › DOF Analysis (`FusionDOFAnalysisCommand`)
- SOLID › INSPECT › Edit Component Connection Analysis (`FusionEditComponentConnectionAnalysisCommand`)
- SOLID › INSPECT › Fastener Stack Analysis (`FusionFastenerStackAnalysisCommand`)
- SOLID › INSPECT › Find Similar Components (`SimilarPartsCommand`)
- SOLID › INSPECT › Navigator (`GraphViewCmd`)
- SOLID › INSPECT › Display Component Colors (`FusionViewColorCyclingToggleCmd`)
- SOLID › INSPECT › Display Mesh Face Groups (`FacegroupsToggleCmd`)
- SOLID › INSPECT › Assembly Statistics (`FusionAssemblyStatisticsCommand`)
- SOLID › INSPECT › Change Summary (`ShowChangeAwarenessToolbarCmd`)
- SOLID › INSPECT › History (`ShowHistoryToolbarCmd`)
- SOLID › INSPECT › Sustainability Insights (`GravityClimate_ManufacturingSustainabilityInsights_MainDialog`)
- SOLID › INSERT › Decal (`FusionAddEditDecalCommand`)
- SOLID › INSERT › Canvas (`FusionAddCanvasCommand`)
- SOLID › INSERT › Insert T-Spline (`TSplineImportCommand`)
- SOLID › INSERT › Insert SVG (`SketchImportSVG`)
- SOLID › INSERT › Insert DXF (`ImportDxfFileCommand`)
- SOLID › INSERT › Insert Mesh (`ParaMeshInsertAlignCommand`)
- SOLID › INSERT › Insert Fastener (`FusionFastenersCommand`)
- SOLID › INSERT › Insert Derive (`PullDeriveCommand`)
- SOLID › INSERT › Insert McMaster-Carr Component (`InsertMcMasterCarrComponentCommand`)
- SOLID › INSERT › Insert a manufacturer part (`cadenasparts4cad`)
- SOLID › INSERT › Insert TraceParts Supplier Components (`traceparts_insert`)
- SOLID › ASSEMBLE › Add To Assembly (`NewAssemblyFromPartCommand`)
- SOLID › SELECT › Select (`SelectCommand`)
- SOLID › SELECT › Window Selection (`selectWindow`)
- SOLID › SELECT › Freeform Selection (`selectFreeForm`)
- SOLID › SELECT › Paint Selection (`selectPaint`)
- SOLID › SELECT › Select By Name (`SelectByNameCommand`)
- SOLID › SELECT › Select By Boundary (`SelectByBoundaryCommand`)
- SOLID › SELECT › Select By Size (`FusionSelectBodiesBySizeCommand`)
- SOLID › SELECT › Invert Selection (`SelectByInvertCommand`)
- SOLID › SELECT › Seed And Boundary (`FusionSelectSeedAndBoundaryFacesCommand`)
- SOLID › SELECT › Component Drag (`FusionDragCompControlsCmd`)
- SOLID › SELECT › Select Body Priority (`SelectBodyPriorityCommand`)
- SOLID › SELECT › Select Face Priority (`SelectFacePriorityCommand`)
- SOLID › SELECT › Select Edge Priority (`SelectEdgePriorityCommand`)
- SOLID › SELECT › Select Component Priority (`SelectComponentPriorityCommand`)
- SOLID › SELECT › Selection Filters (`SelectionFilterCommand`)
- SOLID › POSITION › Capture Position (`SnapshotCmd`)
- SOLID › POSITION › Revert Position (`AsBuiltPositionsCmd`)
- SKETCH › CREATE › Midpoint Line (`SketchMidpointLine`)
- SKETCH › CREATE › SketchConstrainer (`SketchConstrainer`)
- SKETCH › CREATE › 2-Tangent Circle (`CircleTanTanRadius`)
- SKETCH › CREATE › 3-Tangent Circle (`CircleThreeTangent`)
- SKETCH › CREATE › Tangent Arc (`ArcTangent`)
- SKETCH › CREATE › Ellipse (`CircleElipse`)
- SKETCH › CREATE › Center Point Slot (`ShapeSlotCenterPoint`)
- SKETCH › CREATE › Three Point Arc Slot (`ShapeArcSlotThreePoint`)
- SKETCH › CREATE › Center Point Arc Slot (`ShapeArcSlotCenterTwoPoint`)
- SKETCH › CREATE › Fit Point Spline (`DrawSpline`)
- SKETCH › CREATE › Control Point Spline (`DrawCVMSpline3D`)
- SKETCH › CREATE › Control Point Spline (`DrawCVMSpline5D`)
- SKETCH › CREATE › Conic Curve (`ConicCurveCmd`)
- SKETCH › CREATE › Text (`MTextCmd`)
- SKETCH › CREATE › Fit Curves to Mesh Section (`FitCurvesToSectionCommand`)
- SKETCH › CREATE › Mirror (`MirrorSketchCommand`)
- SKETCH › CREATE › Circular Pattern (`CircularSketchPatternCommand`)
- SKETCH › CREATE › Rectangular Pattern (`RectangularSketchPatternCommand`)
- SKETCH › CREATE › Project (`ProjectNewCmd`)
- SKETCH › CREATE › Intersect (`IntersectCmd`)
- SKETCH › CREATE › Spun Profile (`SpunProfileCmd`)
- SKETCH › CREATE › Include 3D Geometry (`Include3DGeometry`)
- SKETCH › CREATE › Project To Surface (`ProjectToSurface`)
- SKETCH › CREATE › Intersection Curve (`IntersectionCurve`)
- SKETCH › CREATE › Isoparametric Curve (`SketchIsoparametricCurve`)
- SKETCH › MODIFY › Fillet (`FilletSketchCmd`)
- SKETCH › MODIFY › Equal Distance Chamfer (`ChamferSketchEqualDistance`)
- SKETCH › MODIFY › Distance and Angle Chamfer (`ChamferSketchDistanceAngle`)
- SKETCH › MODIFY › Two Distance Chamfer (`ChamferSketchDistanceDistance`)
- SKETCH › MODIFY › Blend Curve (`BlendG1CurveSketchCmd`)
- SKETCH › MODIFY › Offset (`Offset`)
- SKETCH › MODIFY › Trim (`TrimSketchCmd`)
- SKETCH › MODIFY › Extend (`ExtendSketchCmd`)
- SKETCH › MODIFY › Break (`BreakSketchCmd`)
- SKETCH › MODIFY › Sketch Scale (`SketchScaleCmd`)
- SKETCH › CONSTRAINTS › AutoConstrain (`SketchAutoConstraintAndDimCmd`)
- SKETCH › CONSTRAINTS › AutoConstrain from datum (`SketchAutoConstraintAndDimFromDatumCmd`)
- SKETCH › CONSTRAINTS › Curvature (`ConstraintSmooth`)
- SKETCH › CONSTRAINTS › Polygon (`SketchPolygonConstraintCmd`)
- SKETCH › CONFIGURE › Configure (`FusionStartDesignConfigModeCmd`)
- SKETCH › CONFIGURE › Display Configuration Table (`FusionShowDesignConfigPanelCmd`)
- SKETCH › CONFIGURE › Create Configuration Rules (`FusionConfigurationRulesCmd`)
- SKETCH › INSPECT › Interference (`InterferenceCheckCommand`)
- SKETCH › INSPECT › Section Analysis (`FusionHalfSectionViewCommand`)
- SKETCH › INSPECT › Curvature Comb Analysis (`FusionCurvatureCombAnalysisCommand`)
- SKETCH › INSPECT › Curvature Map Analysis (`FusionCurvatureMapAnalysisCommand`)
- SKETCH › INSPECT › Draft Analysis (`FusionDraftAnalysisCommand`)
- SKETCH › INSPECT › Environment Map Analysis (`FusionEnvironmentMapAnalysisCommand`)
- SKETCH › INSPECT › Isocurve Analysis (`FusionIsoCurveAnalysisCommand`)
- SKETCH › INSPECT › Validate (`FusionSurfaceValidateCommand`)
- SKETCH › INSPECT › Zebra Analysis (`FusionZebraAnalysisCommand`)
- SKETCH › INSPECT › Accessibility Analysis (`FusionAccessibilityAnalysisCommand`)
- SKETCH › INSPECT › Center of Mass (`FusionCenterOfMassCommand`)
- SKETCH › INSPECT › Minimum Radius Analysis (`FusionMinimumRadiusAnalysisCommand`)
- SKETCH › INSPECT › Component Connection Analysis (`FusionComponentConnectionAnalysisCommand`)
- SKETCH › INSPECT › DOF Analysis (`FusionDOFAnalysisCommand`)
- SKETCH › INSPECT › Edit Component Connection Analysis (`FusionEditComponentConnectionAnalysisCommand`)
- SKETCH › INSPECT › Fastener Stack Analysis (`FusionFastenerStackAnalysisCommand`)
- SKETCH › INSPECT › Find Similar Components (`SimilarPartsCommand`)
- SKETCH › INSPECT › Navigator (`GraphViewCmd`)
- SKETCH › INSPECT › Display Component Colors (`FusionViewColorCyclingToggleCmd`)
- SKETCH › INSPECT › Display Mesh Face Groups (`FacegroupsToggleCmd`)
- SKETCH › INSPECT › Assembly Statistics (`FusionAssemblyStatisticsCommand`)
- SKETCH › INSPECT › Change Summary (`ShowChangeAwarenessToolbarCmd`)
- SKETCH › INSPECT › History (`ShowHistoryToolbarCmd`)
- SKETCH › INSPECT › Sustainability Insights (`GravityClimate_ManufacturingSustainabilityInsights_MainDialog`)
- SKETCH › INSERT › Decal (`FusionAddEditDecalCommand`)
- SKETCH › INSERT › Canvas (`FusionAddCanvasCommand`)
- SKETCH › INSERT › Insert T-Spline (`TSplineImportCommand`)
- SKETCH › INSERT › Insert SVG (`SketchImportSVG`)
- SKETCH › INSERT › Insert DXF (`ImportDxfFileCommand`)
- SKETCH › INSERT › Insert Mesh (`ParaMeshInsertAlignCommand`)
- SKETCH › INSERT › Insert Component (`FusionImportCommandFromToolbar`)
- SKETCH › INSERT › Insert Fastener (`FusionFastenersCommand`)
- SKETCH › INSERT › Duplicate With Joints (`FusionDuplicateWithJointsCommand`)
- SKETCH › INSERT › Insert Derive (`PullDeriveCommand`)
- SKETCH › INSERT › Insert McMaster-Carr Component (`InsertMcMasterCarrComponentCommand`)
- SKETCH › INSERT › Insert a manufacturer part (`cadenasparts4cad`)
- SKETCH › INSERT › Insert TraceParts Supplier Components (`traceparts_insert`)
- SKETCH › ASSEMBLE › Add To Assembly (`NewAssemblyFromPartCommand`)
- SKETCH › SELECT › Select (`SelectCommand`)
- SKETCH › SELECT › Window Selection (`selectWindow`)
- SKETCH › SELECT › Freeform Selection (`selectFreeForm`)
- SKETCH › SELECT › Paint Selection (`selectPaint`)
- SKETCH › SELECT › Select By Name (`SelectByNameCommand`)
- SKETCH › SELECT › Select By Boundary (`SelectByBoundaryCommand`)
- SKETCH › SELECT › Select By Size (`FusionSelectBodiesBySizeCommand`)
- SKETCH › SELECT › Invert Selection (`SelectByInvertCommand`)
- SKETCH › SELECT › Seed And Boundary (`FusionSelectSeedAndBoundaryFacesCommand`)
- SKETCH › SELECT › Component Drag (`FusionDragCompControlsCmd`)
- SKETCH › SELECT › Select Body Priority (`SelectBodyPriorityCommand`)
- SKETCH › SELECT › Select Face Priority (`SelectFacePriorityCommand`)
- SKETCH › SELECT › Select Edge Priority (`SelectEdgePriorityCommand`)
- SKETCH › SELECT › Select Component Priority (`SelectComponentPriorityCommand`)
- SKETCH › SELECT › Selection Filters (`SelectionFilterCommand`)
- SKETCH › FINISH SKETCH › Finish with AutoConstrain (`SketchAutoConstrainAndFinish`)