{
 "about": "What each action matrix design costs on a CI runner, in seconds (secs: the whole design, load: before its first action), for cutting the nightly shards (apps/solidcraft-cli/tests/action_matrix.rs, plan). Written with the baseline by cargo xtask action-matrix --bless --from DIR.",
 "designs": {
  "corpus/components-arm": {"secs": 48.0, "load": 0.3},
  "corpus/issue-489-stacked-join": {"secs": 2.8, "load": 0.0},
  "corpus/issue-616-lid-ribs": {"secs": 257.6, "load": 0.7},
  "corpus/joints-hinge": {"secs": 23.4, "load": 0.0},
  "corpus/m0-box-fillet-hole": {"secs": 25.2, "load": 0.1},
  "corpus/m0-revolve-primitives": {"secs": 86.9, "load": 0.5},
  "corpus/modern-path-pattern": {"secs": 73.6, "load": 0.4},
  "corpus/modern-plastic": {"secs": 617.5, "load": 1.4},
  "corpus/modern-sheet-metal": {"secs": 47.9, "load": 0.0},
  "corpus/move-bodies": {"secs": 2.7, "load": 0.0},
  "corpus/naming-split-pieces": {"secs": 15.6, "load": 0.1},
  "corpus/split-body-pieces": {"secs": 12.4, "load": 0.1},
  "demo/crazy-geom-cuts": {"secs": 21.4, "load": 0.1},
  "demo/enclosure_steps": {"secs": 655.0, "load": 15.4},
  "demo/logo-up-down-join": {"secs": 5.8, "load": 0.0},
  "demo/pi-case": {"secs": 3753.2, "load": 5.2},
  "demo/pi-case-0.8": {"secs": 13979.6, "load": 10.8},
  "examples/bracket": {"secs": 14.2, "load": 0.1},
  "examples/sensor_enclosure": {"secs": 8289.0, "load": 16.3},
  "oracle/01-box": {"secs": 0.9, "load": 0.0},
  "oracle/02-cylinder": {"secs": 1.4, "load": 0.0},
  "oracle/03-box-through-hole": {"secs": 18.8, "load": 0.0},
  "oracle/04-revolve-vase": {"secs": 8.0, "load": 0.0},
  "oracle/05-taper-extrude": {"secs": 5.4, "load": 0.0},
  "oracle/06-symmetric-extrude": {"secs": 0.9, "load": 0.0},
  "oracle/07-fillet-all-edges": {"secs": 54.0, "load": 0.2},
  "oracle/08-chamfer": {"secs": 9.4, "load": 0.1},
  "oracle/09-shell": {"secs": 2.2, "load": 0.0},
  "oracle/10-rect-pattern-holes": {"secs": 135.3, "load": 0.3},
  "oracle/11-circular-pattern-flange": {"secs": 24.2, "load": 0.3},
  "oracle/12-mirror-feature": {"secs": 30.5, "load": 0.2},
  "oracle/13-combine-join": {"secs": 29.3, "load": 0.1},
  "oracle/14-combine-cut": {"secs": 123.6, "load": 2.4},
  "oracle/15-combine-intersect": {"secs": 41.4, "load": 12.3},
  "oracle/16-sweep": {"secs": 29.7, "load": 0.0},
  "oracle/17-loft": {"secs": 33.6, "load": 0.0},
  "oracle/18-hole-features": {"secs": 63.5, "load": 1.8},
  "oracle/19-l-bracket-constrained": {"secs": 1.6, "load": 0.0},
  "oracle/20-slot-constrained": {"secs": 3.0, "load": 0.0},
  "oracle/21-draft": {"secs": 5.4, "load": 0.0},
  "oracle/22-split-body": {"secs": 392.0, "load": 4.4},
  "oracle/23-bracket-multifeature": {"secs": 149.8, "load": 4.3},
  "oracle/24-user-parameters": {"secs": 13.4, "load": 0.0},
  "oracle/25-sketch-triangle": {"secs": 4.9, "load": 0.0},
  "oracle/26-sketch-belt": {"secs": 9.3, "load": 0.0},
  "oracle/27-sketch-trapezoid": {"secs": 32.9, "load": 0.0},
  "oracle/28-blind-pocket-fillets": {"secs": 143.7, "load": 0.6},
  "oracle/29-two-sided-and-partial-revolve": {"secs": 48.5, "load": 2.1},
  "oracle/30-fillet-after-shell": {"secs": 151.5, "load": 1.0},
  "oracle/31-fillet-l-all-edges": {"secs": 129.9, "load": 2.2},
  "oracle/32-boss-plate-fillets": {"secs": 122.0, "load": 0.4},
  "oracle/33-fillet-tangent-chain": {"secs": 86.5, "load": 0.3},
  "oracle/34-chamfer-then-fillet": {"secs": 71.0, "load": 0.3},
  "oracle/35-fillet-curved-curved": {"secs": 38.8, "load": 19.0},
  "oracle/36-corner-blend-two-radii": {"secs": 27.5, "load": 0.1},
  "oracle/37-pyramid-apex-blend": {"secs": 18.3, "load": 0.1},
  "oracle/38-coincident-cylinders": {"secs": 3.2, "load": 1.2},
  "oracle/39-tee-pipe": {"secs": 880.7, "load": 26.6},
  "oracle/40-box-sphere-torus": {"secs": 352.8, "load": 9.4},
  "oracle/41-tube-radial-holes": {"secs": 18429.5, "load": 134.7},
  "oracle/42-overlapping-patterns": {"secs": 1466.4, "load": 2.4},
  "oracle/43-cut-splits-body": {"secs": 3.3, "load": 0.0},
  "oracle/44-shell-l-bracket": {"secs": 3.7, "load": 0.0},
  "oracle/45-shell-boss-plate": {"secs": 83.9, "load": 0.8},
  "oracle/46-shell-two-open-faces": {"secs": 2.1, "load": 0.0},
  "oracle/47-draft-curved-pocket": {"secs": 30.7, "load": 0.1},
  "oracle/48-pulley": {"secs": 138.2, "load": 0.1},
  "oracle/49-helical-sweep": {"secs": 715.3, "load": 0.3},
  "oracle/50-sweep-tight-bend": {"secs": 24.9, "load": 0.0},
  "oracle/51-loft-rect-circle-offset": {"secs": 22.0, "load": 0.0},
  "oracle/52-circular-pattern-fillet": {"secs": 143.8, "load": 8.3},
  "oracle/53-path-pattern": {"secs": 50.3, "load": 0.3},
  "oracle/54-mirror-body-fillets": {"secs": 17.6, "load": 0.1},
  "oracle/55-tapped-hole-cosmetic": {"secs": 29.4, "load": 0.8},
  "oracle/56-holes-on-curved-face": {"secs": 721.8, "load": 12.0},
  "oracle/57-hole-pattern-sketch-points": {"secs": 168.2, "load": 1.5},
  "oracle/58-phone-stand": {"secs": 45.6, "load": 0.5},
  "oracle/59-enclosure-base": {"secs": 274.7, "load": 3.3},
  "oracle/60-pipe-flange": {"secs": 213.4, "load": 13.6},
  "oracle/61-shaft-keyway": {"secs": 1938.2, "load": 11.1},
  "oracle/62-heat-sink": {"secs": 54.7, "load": 0.7},
  "oracle/63-hinge-knuckle": {"secs": 107.9, "load": 0.4},
  "oracle/64-sketch-tangent-arc-chain": {"secs": 36.5, "load": 0.0},
  "oracle/65-sketch-gear-tooth": {"secs": 18.7, "load": 0.0},
  "oracle/66-sketch-linkage": {"secs": 24.2, "load": 0.0},
  "oracle/67-sm-base-flange": {"secs": 11.4, "load": 0.0},
  "oracle/68-sm-edge-flange": {"secs": 261.8, "load": 0.0},
  "oracle/69-sm-tray": {"secs": 1449.7, "load": 0.1},
  "oracle/70-sm-flange-45": {"secs": 194.4, "load": 0.0},
  "oracle/71-sm-custom-rule": {"secs": 200.7, "load": 0.0},
  "oracle/72-sm-contour-flange": {"secs": 63.6, "load": 0.0},
  "oracle/73-sm-hem": {"secs": 465.7, "load": 0.0},
  "oracle/74-sm-unfold-refold": {"secs": 205.2, "load": 0.0},
  "oracle/75-sm-bracket-holes": {"secs": 672.8, "load": 0.7},
  "oracle/76-sm-thickness-variant": {"secs": 171.0, "load": 0.1},
  "oracle/77-fillet-variable-linear": {"secs": 5.6, "load": 0.0},
  "oracle/78-fillet-variable-to-zero": {"secs": 8.6, "load": 0.0},
  "oracle/79-fillet-chord-length": {"secs": 5.7, "load": 0.0},
  "oracle/80-fillet-taper-to-fit": {"secs": 25.5, "load": 0.0},
  "oracle/81-fillet-spline-radius": {"secs": 82.2, "load": 0.0},
  "oracle/82-thin-extrude-frame": {"secs": 4.2, "load": 0.0},
  "regressions/blind_hole_in_long_d_profile": {"secs": 54.3, "load": 0.3},
  "regressions/join_struts_on_bore_wall": {"secs": 333.4, "load": 0.7},
  "regressions/lid_ribs_flush_with_window": {"secs": 234.8, "load": 0.7},
  "regressions/loft_cut_beside_round_hole": {"secs": 79.4, "load": 0.3},
  "regressions/oblique_cut_of_cylinder": {"secs": 162.2, "load": 0.1},
  "regressions/oblique_cut_of_cylinder_hang": {"secs": 244.9, "load": 0.4},
  "regressions/partial_face_contact_pattern": {"secs": 269.4, "load": 1.7},
  "regressions/ring_cut_below_recess_thin_floor": {"secs": 7.4, "load": 0.1},
  "regressions/shallow_loft_cut_from_top_face": {"secs": 40.8, "load": 1.3},
  "typical/filleted-shelled-box": {"secs": 43.4, "load": 0.4},
  "typical/holes-pattern-chamfer": {"secs": 525.7, "load": 3.1},
  "typical/loft": {"secs": 69.9, "load": 0.3},
  "typical/multi-body-join-cut": {"secs": 39.1, "load": 0.1},
  "typical/revolved-part": {"secs": 12.1, "load": 0.0},
  "typical/sheet-metal-bracket": {"secs": 140.1, "load": 0.8},
  "typical/stacked-extrude": {"secs": 37.1, "load": 0.5},
  "typical/sweep": {"secs": 57.9, "load": 0.0},
  "typical/up-down-join": {"secs": 4.9, "load": 0.0}
 }
}