{
 "id": "18-hole-features",
 "name": "Hole features (counterbore, countersink, blind drilled)",
 "description": "60x40x15 plate; on the top face: counterbore hole at (15,20) through all, countersink at (35,20) through all, simple blind hole depth 10 at (50,20) with 118 deg drill tip.",
 "exercises": [
  "hole_counterbore",
  "hole_countersink",
  "hole_blind"
 ],
 "units": {
  "length": "mm",
  "angle": "deg",
  "area": "mm2",
  "volume": "mm3"
 },
 "conventions": {
  "world": "right-handed; Z up. XY/XZ/YZ are the origin planes.",
  "sketch_frame": "sketch-local 2D coords; world = plane.origin + x*plane.x_dir + y*plane.y_dir (origin in mm). Profile 'loops' list sketch entity ids.",
  "point_refs": "'<id>.start' / '<id>.end' / '<id>.center' reuse (share) that existing sketch point; 'at' is its position when referenced.",
  "extrude_direction": "positive = along sketch plane normal unless stated",
  "selections": "selected faces/edges carry 'point': a world-space point on the face / the edge's parametric midpoint; pick the nearest face/edge to it."
 },
 "parameters": [],
 "features": [
  {
   "op": "sketch",
   "name": "Plate_sketch",
   "plane": {
    "ref": "XY",
    "origin": [
     0.0,
     0.0,
     0.0
    ],
    "x_dir": [
     1.0,
     0.0,
     0.0
    ],
    "y_dir": [
     0.0,
     1.0,
     0.0
    ],
    "normal": [
     0.0,
     0.0,
     1.0
    ]
   },
   "entities": [
    {
     "type": "line",
     "start": {
      "at": [
       0,
       0
      ]
     },
     "end": {
      "at": [
       60,
       0
      ]
     },
     "id": "l1"
    },
    {
     "type": "line",
     "start": {
      "ref": "l1.end",
      "at": [
       60.0,
       0.0
      ]
     },
     "end": {
      "at": [
       60,
       40
      ]
     },
     "id": "l2"
    },
    {
     "type": "line",
     "start": {
      "ref": "l2.end",
      "at": [
       60.0,
       40.0
      ]
     },
     "end": {
      "at": [
       0,
       40
      ]
     },
     "id": "l3"
    },
    {
     "type": "line",
     "start": {
      "ref": "l3.end",
      "at": [
       0.0,
       40.0
      ]
     },
     "end": {
      "ref": "l1.start",
      "at": [
       0.0,
       0.0
      ]
     },
     "id": "l4"
    }
   ],
   "constraints": [],
   "dimensions": []
  },
  {
   "op": "extrude",
   "name": "Plate",
   "operation": "new",
   "profiles": [
    {
     "sketch": "Plate_sketch",
     "loops": [
      {
       "outer": true,
       "curves": [
        "l1",
        "l2",
        "l3",
        "l4"
       ]
      }
     ]
    }
   ],
   "extent": {
    "type": "distance",
    "distance": 15,
    "direction": "positive"
   },
   "result_bodies": [
    "Plate"
   ]
  },
  {
   "op": "hole",
   "name": "CBore",
   "hole_type": "counterbore",
   "face": {
    "type": "plane",
    "normal_at_point_on_face": [
     0.0,
     0.0,
     1.0
    ],
    "plane_normal_outward": [
     0.0,
     0.0,
     1.0
    ],
    "point": [
     30.0,
     20.0,
     15.0
    ]
   },
   "position": [
    15,
    20,
    15
   ],
   "direction": "into the material (-Z)",
   "diameter": 8,
   "counterbore_diameter": 14,
   "counterbore_depth": 5,
   "extent": "through_all"
  },
  {
   "op": "hole",
   "name": "CSink",
   "hole_type": "countersink",
   "face": {
    "type": "plane",
    "normal_at_point_on_face": [
     0.0,
     0.0,
     1.0
    ],
    "plane_normal_outward": [
     0.0,
     0.0,
     1.0
    ],
    "point": [
     30.0,
     20.0,
     15.0
    ]
   },
   "position": [
    35,
    20,
    15
   ],
   "direction": "into the material (-Z)",
   "diameter": 6,
   "countersink_diameter": 12,
   "countersink_angle": 90,
   "extent": "through_all"
  },
  {
   "op": "hole",
   "name": "Blind",
   "hole_type": "simple",
   "face": {
    "type": "plane",
    "normal_at_point_on_face": [
     0.0,
     0.0,
     1.0
    ],
    "plane_normal_outward": [
     0.0,
     0.0,
     1.0
    ],
    "point": [
     25.5,
     20.0,
     15.0
    ]
   },
   "position": [
    50,
    20,
    15
   ],
   "direction": "into the material (-Z)",
   "diameter": 6,
   "depth": 10,
   "tip_angle": 118,
   "extent": "distance"
  }
 ]
}