{ "id": "41-tube-radial-holes", "name": "Many small holes in a curved wall", "description": "Tube OD40/ID34 length 60; three d4 radial holes along Y (z=15,30,45) cut symmetric through both walls; circular pattern x3 over 120 deg -> 18 holes.", "exercises": [ "annulus_profile", "sketch_xz", "symmetric", "extrude_cut", "circular_pattern", "holes_in_cylinder" ], "units": { "length": "mm", "angle": "deg", "area": "mm2", "volume": "mm3" }, "conventions": { "world": "right-handed; Z up. XY/XZ/YZ are the origin planes.", "sketch_frame": "sketch-local 2D coords; world = plane.origin + x*plane.x_dir + y*plane.y_dir (origin in mm). Profile 'loops' list sketch entity ids.", "point_refs": "'.start' / '.end' / '.center' reuse (share) that existing sketch point; 'at' is its position when referenced.", "extrude_direction": "positive = along sketch plane normal unless stated", "selections": "selected faces/edges carry 'point': a world-space point on the face / the edge's parametric midpoint; pick the nearest face/edge to it." }, "parameters": [], "features": [ { "op": "sketch", "name": "TubeSketch", "plane": { "ref": "XY", "origin": [ 0.0, 0.0, 0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 0.0, 1.0, 0.0 ], "normal": [ 0.0, 0.0, 1.0 ] }, "entities": [ { "type": "circle", "center": { "at": [ 0, 0 ] }, "radius": 20, "id": "c_out" }, { "type": "circle", "center": { "ref": "c_out.center", "at": [ 0.0, 0.0 ] }, "radius": 17, "id": "c_in" } ], "constraints": [], "dimensions": [] }, { "op": "extrude", "name": "Tube", "operation": "new", "profiles": [ { "sketch": "TubeSketch", "loops": [ { "outer": true, "curves": [ "c_out" ] }, { "outer": false, "curves": [ "c_in" ] } ] } ], "extent": { "type": "distance", "distance": 60, "direction": "positive" }, "result_bodies": [ "Tube" ] }, { "op": "sketch", "name": "HoleSketch", "plane": { "ref": "XZ", "origin": [ 0.0, 0.0, 0.0 ], "x_dir": [ 1.0, 0.0, 0.0 ], "y_dir": [ 0.0, 0.0, -1.0 ], "normal": [ 0.0, 1.0, 0.0 ] }, "entities": [ { "type": "circle", "center": { "at": [ 0.0, -15.0 ] }, "radius": 2, "id": "c1" }, { "type": "circle", "center": { "at": [ 0.0, -30.0 ] }, "radius": 2, "id": "c2" }, { "type": "circle", "center": { "at": [ 0.0, -45.0 ] }, "radius": 2, "id": "c3" } ], "constraints": [], "dimensions": [] }, { "op": "extrude", "name": "Holes", "operation": "cut", "profiles": [ { "sketch": "HoleSketch", "loops": [ { "outer": true, "curves": [ "c1" ] } ] }, { "sketch": "HoleSketch", "loops": [ { "outer": true, "curves": [ "c2" ] } ] }, { "sketch": "HoleSketch", "loops": [ { "outer": true, "curves": [ "c3" ] } ] } ], "extent": { "type": "symmetric", "distance": 25, "is_full_length": false, "meaning": "distance on each side" }, "result_bodies": [ "Tube" ] }, { "op": "circular_pattern", "name": "HolePattern", "pattern_of": "features", "features": [ "Holes" ], "axis": { "ref": "world Z axis", "origin": [ 0, 0, 0 ], "dir": [ 0, 0, 1 ] }, "count": 3, "total_angle": 120, "symmetric": false } ] }