OneCAD

iges_in

Fix modelling regressions and reconcile WIP UI work

2026-10-10 15:37:00 -04:00

step_in

feat: strengthen modeling, configuration, and assembly workflows

2026-10-11 00:37:26 -04:00

blend_corner.rs

Join chamfers across unequal sloped rim walls

2026-10-11 01:37:06 +02:00

blend_variable.rs

Variable-radius fillets through middle points: radii at positions along the edge, straight or smooth between

2026-10-10 06:06:33 +00:00

blend.rs

Join chamfers across unequal sloped rim walls

2026-10-11 01:37:06 +02:00

body_lump_tests.rs

feat: preserve modeling intent across sketches, assemblies, and fabrication

2026-10-11 01:28:01 -04:00

body.rs

feat: preserve modeling intent across sketches, assemblies, and fabrication

2026-10-11 01:28:01 -04:00

build.rs

A sweep along a path with sharp corners follows the corners: sweeping a rim profile along three lines (an open rectangle) gave a body of volume -0.0006 mm3 with its centre of mass at x = -3.5e9, and no error

2026-10-10 17:57:34 -04:00

coplanar.rs

No panics in the boolean's final assembly (the web build aborts on any panic: the Plastic Enclosure sample panicked 8 times and crashed the browser's start page); face pushes check their result and fall back to the general offset (a boss standing on a plate joins again with off-axis cylinder seams); offset errors name the face they can't move; docs/robustness.md with the before and after rates; caught panics counted per design in the robustness runs

2026-10-10 00:04:37 +00:00

curveblend_tests.rs

feat: strengthen modeling, configuration, and assembly workflows

2026-10-11 00:37:26 -04:00

curveblend.rs

feat: strengthen modeling, configuration, and assembly workflows

2026-10-11 00:37:26 -04:00

delete_face.rs

…

emboss.rs

feat: strengthen sketches, feature editing, and independent assemblies

2026-10-11 02:44:31 -04:00

freeform.rs

…

fuzz.rs

Robustness runs and the kernel fixes they found

2026-10-10 00:04:37 +00:00

heal.rs

A panic while healing a boolean result no longer ends the boolean: a shallow, wide loft cut from a top face (556.68 x 99 down 4 mm to 80 x 80 in a 900 x 480 x 160 slab) failed with "called Option::unwrap() on a None value"

2026-10-10 17:57:34 -04:00

helix.rs

…

iges_in.rs

…

iges_out.rs

…

lib.rs

feat: strengthen sketches, feature editing, and independent assemblies

2026-10-11 02:44:31 -04:00

lip.rs

Lips on rounded, shelled rims: the band along the rim's edge is raised from the body's own faces (kernel::raise_band: the rim face split along the band's exact offset edge, the band's walls swept up from the walls below, a top), since a join can't merge walls that continue each other; grooves cut with a band reaching into the free side so no wall coincides; tests against the band's area times its height

2026-10-10 00:04:37 +00:00

loopblend.rs

Join chamfers across unequal sloped rim walls

2026-10-11 01:37:06 +02:00

measure.rs

…

meshbody.rs

fix: load designs off-thread and cache recent thumbnails as PNGs

2026-10-10 20:55:14 -04:00

offset.rs

Shell refuses a wall thicker than a rim instead of returning a corrupt body: the topology-preserving face offset now checks every planar face's moved loops, and a loop that turns inside out or two loops that cross (a rim or ledge narrower than the move, e.g. a bowl opening sliding past the slab's outer edge) is an error naming the spot. Before, the self-crossing cavity went into the boolean and the shelled body came back with roughly twice its volume and its centre of mass outside the body, so every later cut failed its volume check

2026-10-10 12:32:03 -04:00

ops.rs

feat: strengthen sketches, feature editing, and independent assemblies

2026-10-11 02:44:31 -04:00

placement_tests.rs

feat: strengthen sketches, feature editing, and independent assemblies

2026-10-11 02:44:31 -04:00

polybool.rs

A round hole elsewhere on a body no longer breaks a loft cut beside it: a loft cut from a pocket floor (556.68 x 99 down 4 mm to 80 x 80), with a 35 mm hole 66 mm away that it never touches, failed with a kernel panic in TroughFall, while the same cut without the hole, or with the hole made afterwards, worked

2026-10-10 17:57:34 -04:00

polyhedron.rs

Shell of rounded parts (the first tutorial): a round thinner than the shell collapses to a sharp inner edge (as in Fusion) instead of failing; when an open face's tangent round can't follow it out, every face moves in and the opening is the open face's copy swept out through the body; spindle tori (a bottom round running round a rounded corner) are taken by the offset; shells after a drilled hole; engine tests against the analytic volumes (box with rounded vertical edges and bottom loop, the tutorial plate at 2 mm and 1.5 mm)

2026-10-10 00:04:37 +00:00

prism.rs

feat: preserve modeling intent across sketches, assemblies, and fabrication

2026-10-11 01:28:01 -04:00

provenance.rs

…

sew.rs

feat: preserve modeling intent across sketches, assemblies, and fabrication

2026-10-11 01:28:01 -04:00

shell_groups.rs

feat: preserve modeling intent across sketches, assemblies, and fabrication

2026-10-11 01:28:01 -04:00

splitface.rs

fix: load designs off-thread and cache recent thumbnails as PNGs

2026-10-10 20:55:14 -04:00

step_out.rs

Faces split on purpose stay split: the body remembers its Split Face lines, export and healing keep the pieces apart

2026-10-09 21:31:16 +00:00

step.rs

feat: strengthen sketches, feature editing, and independent assemblies

2026-10-11 02:44:31 -04:00

surface_kind.rs

Construction axes, points and planes from model geometry (SOLID ▸ CONSTRUCT): axes through a cylinder/cone/torus, perpendicular to a face at a point, through two planes, two points or an edge; points at a vertex, through two edges, three planes, at the centre of a circle/sphere/torus, at an edge and a plane, along a path; midplane, planes through two edges or three points, tangent to a face, along a path. References (doc::construct::GeoRef) keep picked faces and edges by persistent name and resolve on each evaluation (they follow the model); results live in ModelState.construct, in the component's frame; view::construction_axes/points/planes for the viewport; kernel::face_surface for a face's analytic surface

2026-10-09 12:47:56 +00:00

surfaces.rs

fix: load designs off-thread and cache recent thumbnails as PNGs

2026-10-10 20:55:14 -04:00

sweep_path.rs

…

tests.rs

fix: join connected solids at exact edge contacts

2026-10-10 23:11:02 -04:00

thread_tests.rs

…

topo.rs

Measuring bodies of thousands of faces: 13 s to 0.8 s for 5000 faces (the body's size was recomputed for every face); merged topology counts right on finely faceted bodies (vertices welded only when they coincide, planes merged only when parallel within 1e-9), with a test

2026-10-10 00:04:37 +00:00