NOWN-DEVandClaude Opus 5.5 af0440aaab feat: sketches on a sheet metal face attach to its panel (#474) ...

A sketch on a flat face of a sheet metal body was refused ("this face has no exact planar
source"), so the only way was a plane frozen in space. When the sheet changes (a flange's
angle, the thickness), the frozen sketch stays behind: a cut from it fails on the slanted
flange or leaves a blind pocket in the thicker sheet.

`sketch.create` with a face of a sheet metal body now attaches the sketch to the panel the
face belongs to. It keeps the face's name, `sheet:<body>:<panel>:<top|bottom>` (the panel is
the base or a flange's feature tag), and takes the panel's exact plane from its flat region
and fold each time the model is evaluated, so the sketch follows the sheet through parameter
changes, unfold and refold. Its coordinates are the flat pattern's (the bottom face's y
mirrored). A face that is gone is reported as a lost attachment, never replaced by the
nearest face. The attachment follows a renamed or copied body, shows as `sheet_face` in the
command result and as its own status in Redefine Sketch Plane. `fixed: true` still freezes.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>

2026-10-12 21:36:58 -04:00

..

acceptance_lid_lip_after_resize.json

Fix modelling regressions and reconcile WIP UI work

2026-10-10 15:37:00 -04:00

acceptance_lip_on_rounded_rim.json

Scenario acceptance_lip_on_rounded_rim enabled: the Lip on the enclosure's rounded rim works since #29's fix

2026-10-10 07:03:21 +00:00

acceptance_pattern_of_suppressed_feature.json

A pattern or mirror of a suppressed feature has nothing to copy: its copies go with it and the pattern warns (the acceptance enclosure loses all four standoffs when Standoff is suppressed); scenario acceptance_pattern_of_suppressed_feature enabled

2026-10-10 05:27:01 +00:00

acceptance_sensor_enclosure.json

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

acceptance_snap_fit_after_resize.json

Fix modelling regressions and reconcile WIP UI work

2026-10-10 15:37:00 -04:00

agent_cursor.json

Agent cursor speed: a slider from 1× to 5× with Instant at the far right. Instant no longer breaks: the command runs at once (as with the cursor off) and the pointer jumps to where it acted, with a click ripple. ui.agent_cursor speed takes 1–5 or "instant"; saved "slow" and "normal" read as 1×. Scenario covers 1×, 3× and Instant against the cursor-off result

2026-10-10 16:56:30 +00:00

alias_navigation_bindings.json

Alias navigation preset uses Shift+Alt with LMB/MMB/RMB (Fixes #304) (#306)

2026-10-12 10:33:53 -04:00

alias_plain_drag_box_selects.json

Alias navigation preset uses Shift+Alt with LMB/MMB/RMB (Fixes #304) (#306)

2026-10-12 10:33:53 -04:00

axis_view_drag_orbit.json

feat: add smooth interactive axis view and diagonal snapping

2026-10-11 08:51:24 -04:00

axis_view_hover.json

feat: add smooth interactive axis view and diagonal snapping

2026-10-11 08:51:24 -04:00

axis_view_minimal_turn.json

feat: add smooth interactive axis view and diagonal snapping

2026-10-11 08:51:24 -04:00

axis_view_y_up.json

feat: add smooth interactive axis view and diagonal snapping

2026-10-11 08:51:24 -04:00

browser_chevrons.json

Browser fold arrows: each row is one widget with a stable id, and where the click lands decides what it does (fold arrow with padding, eye, radio, or the row), so an arrow click toggles without also selecting or picking the row or starting a drag; Collapse/Expand tips; ui.at {browser|chevron} and ui.browser for automation; scenario browser_chevrons clicks every folder's arrow (document settings, named views, origin, groups, sketches, construction, canvases, components, bodies, the design) and checks the children; the inch-width units test runs now that params reads unit-less lengths in design units

2026-10-10 07:19:58 +00:00

constraint_glyphs_both_entities.json

Drawing connects to existing points: a new point landing exactly on an existing point (the origin too) gets a coincident constraint in the engine, for every drawing command and every caller (MCP, scripts, clicks), in the same undo step; connect: false opts out. Re-tying an existing coincident returns it ("existing": true) instead of failing; the UI's after-the-fact tie_snaps is gone

2026-10-10 12:08:19 -04:00

constraint_glyphs_clear_of_dimensions.json

fix(sketch): constraint glyphs move off dimension values

2026-10-11 21:14:02 +02:00

extrude_side_contact_defaults_join.json

fix: join additive extrusions and merge coplanar faces

2026-10-10 21:31:19 -04:00

face_wins_over_origin_plane.json

fix: restore shell and cut wall topology in 0.2.1

2026-10-11 15:17:05 -04:00

hidden_origin_planes_not_pickable.json

Hidden origin planes and axes are not pickable: Create Sketch only brings the Origin back when no body is shown; origin and construction planes give way to a face or profile at the same depth (a shelled box's floor where the XZ plane crosses it). Scenarios hidden_origin_planes_not_pickable and face_wins_over_origin_plane

2026-10-10 00:14:00 +00:00

mirror_body_keeps_fillets.json

Pattern and Mirror dialogs copy picked bodies, fillets included (#193)

2026-10-12 10:06:18 -04:00

offset_plane_from_face.json

Offset Plane from a planar body face (#167)

2026-10-12 10:06:10 -04:00

pattern_body_keeps_fillets.json

Pattern and Mirror dialogs copy picked bodies, fillets included (#193)

2026-10-12 10:06:18 -04:00

pattern_direction_edge.json

Pattern and Mirror dialogs copy picked bodies, fillets included (#193)

2026-10-12 10:06:18 -04:00

rectangle_clicked_on_origin.json

Drawing connects to existing points: a new point landing exactly on an existing point (the origin too) gets a coincident constraint in the engine, for every drawing command and every caller (MCP, scripts, clicks), in the same undo step; connect: false opts out. Re-tying an existing coincident returns it ("existing": true) instead of failing; the UI's after-the-fact tie_snaps is gone

2026-10-10 12:08:19 -04:00

s01_box_fillet_hole_shell.json

Fix modelling regressions and reconcile WIP UI work

2026-10-10 15:37:00 -04:00

s02_revolve_on_xz.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s03_sketch_on_face_cut.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s04_mirror_body.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s05_delete_and_undo.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s06_edit_early_feature.json

Fix modelling regressions and reconcile WIP UI work

2026-10-10 15:37:00 -04:00

s07_components_joint_drive.json

Fix modelling regressions and reconcile WIP UI work

2026-10-10 15:37:00 -04:00

s08_sheet_metal_flat_dxf.json

feat: strengthen modeling, configuration, and assembly workflows

2026-10-11 00:37:26 -04:00

s09_step_roundtrip_hole.json

fix: load designs off-thread and cache recent thumbnails as PNGs

2026-10-10 20:55:14 -04:00

s10_parameters_drive_model.json

Fix modelling regressions and reconcile WIP UI work

2026-10-10 15:37:00 -04:00

s11_sketch_constraints.json

Fix modelling regressions and reconcile WIP UI work

2026-10-10 15:37:00 -04:00

s12_pattern_bodies.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s13_plastic_enclosure.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s14_appearance_export.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s15_start_page_sample_save_reopen.json

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

s16_tabs_separate_undo.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s17_toolbox_and_visibility.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s18_3d_sketch_pipe.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s19_canvas_calibrate.json

Honor design units in sketch dimensions and measurements (#241)

2026-10-12 10:08:11 -04:00

s20_section_with_joint_drive.json

Fix modelling regressions and reconcile WIP UI work

2026-10-10 15:37:00 -04:00

s21_named_views.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s22_sheet_metal_fold.json

feat: sketches on a sheet metal face attach to its panel (#474)

2026-10-12 21:36:58 -04:00

s23_configurations.json

Fix modelling regressions and reconcile WIP UI work

2026-10-10 15:37:00 -04:00

s24_motion_study.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s25_autosave_recovery.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s26_drive_joint_typed.json

Fix modelling regressions and reconcile WIP UI work

2026-10-10 15:37:00 -04:00

s27_move_triad.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s30_pattern_a_hole.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s31_sketch_on_face_projects.json

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

s32_cut_in_active_component.json

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

s33_move_x_arrow.json

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

s34_component_move_carries_sketches.json

Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)

2026-10-12 17:17:01 -04:00

s35_construction_mode.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s36_sketch_palette_visible.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s37_browser_chevrons.json

Fix modelling regressions and reconcile WIP UI work

2026-10-10 15:37:00 -04:00

s38_view_anim_no_jump.json

View cube hover lights the whole region a click turns to: a corner its 3 patches, an edge its 2 strips, a face its middle (one hit test for hover and click; test over all 26 regions). View animations ease with smoothstep and take longer for turns past a quarter turn, so no frame sweeps much more than 9 degrees; s38 and s39 enabled

2026-10-09 18:45:27 +00:00

s40_toolbar_customize_persists.json

Scenario s40 (toolbar customisation survives a restart) runs now

2026-10-10 07:19:58 +00:00

s41_type_value_after_picking.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s42_drag_snap.json

Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs

2026-10-09 12:17:23 +00:00

s43_quit_asks_to_save.json

Save prompt on quit: "Save changes to <name>?" for every unsaved design

2026-10-09 16:03:32 +00:00

s43_root_sketch_on_moved_component_face.json

feat: strengthen modeling, configuration, and assembly workflows

2026-10-11 00:37:26 -04:00

s44_about_licences.json

Rename displayed product to SolidCraft and add header bug reporting

2026-10-11 16:16:48 -04:00

s45_preferences.json

Preferences: one Fusion-style dialog from the gear at the top right and Ctrl+, (Cmd+,)

2026-10-10 05:09:03 +00:00

s46_preferences_fixed_size.json

Preferences: one fixed size, buttons flush right, a real gear icon (#290)

2026-10-12 10:07:23 -04:00

s46_toolbar_dropdown_hover.json

Toolbar: drag commands from drop-downs onto the toolbar; pin icon; Customize Toolbar… (#295)

2026-10-12 10:27:25 -04:00

s47_toolbar_drag_from_dropdown.json

Toolbar: drag commands from drop-downs onto the toolbar; pin icon; Customize Toolbar… (#295)

2026-10-12 10:27:25 -04:00

s48_toolbar_many_pins.json

Toolbar: no cap on pinned buttons (Fixes #323) (#326)

2026-10-12 12:35:19 -04:00

s49_sheet_metal_flange_per_edge.json

feat: edge flanges with their own angle and height per edge (#447)

2026-10-12 20:33:49 -04:00

s49_sketch_point_toolbar.json

fix(ui): put Point on the default sketch toolbar (#445)

2026-10-12 20:13:31 -04:00

s50_toolbar_panel_drops.json

fix(ui): accept toolbar drops across panel labels and gaps (#454)

2026-10-12 20:25:38 -04:00

s60_appearance_overrides.json

feat: strengthen modeling, configuration, and assembly workflows

2026-10-11 00:37:26 -04:00

s61_occurrence_browser.json

feat: preserve modeling intent across sketches, assemblies, and fabrication

2026-10-11 01:28:01 -04:00

s80_configuration_styles.json

feat: strengthen modeling, configuration, and assembly workflows

2026-10-11 00:37:26 -04:00

sketch_on_moved_component_face.json

Fix modelling regressions and reconcile WIP UI work

2026-10-10 15:37:00 -04:00