OneCAD

appearance.rs

Appearances on faces, bodies and components (face > body > component > material > imported colour), with names and opacity and a built-in library of 20 (metals, ABS colours, glass, rubber, wood, paint); AppearanceCommand takes bodies, faces (points) or components, a library name or a colour with opacity, or nothing to clear; appearance.library, appearance.list (a body's resolved look and per-face colours); file format 3 turns the old body colour map into body appearances

2026-10-08 11:37:33 +00:00

assembly.rs

Sheet metal Fold (SheetMetalFoldCmd): fold the base panel along a sketch line (followed when the sketch changes) or two points on its face; angle, bend radius and K-factor from the rule; the bend zone (BA = θ(R + K·T)) comes out of the existing sheet so the flat pattern keeps its size; the line at the bend's centre, start, end or on the mould line; the side holding a picked point stays (default the larger), flip folds down; flanges on the moving part ride along

2026-10-08 11:37:33 +00:00

canvas.rs

Canvas and Decal (FusionAddCanvasCommand, FusionAddEditDecalCommand): PNG/JPEG reference images stored in the design (base64), placed on an origin/construction plane, a sketch plane or a planar face; canvas.edit (position, width, angle, opacity, flip, visibility), canvas.calibrate (scale by a known distance), canvas.delete; drawn textured in the viewport; toolbar tools pick the file, then the plane or face

2026-10-08 05:31:06 +00:00

clipboard.rs

Sheet metal Fold (SheetMetalFoldCmd): fold the base panel along a sketch line (followed when the sketch changes) or two points on its face; angle, bend radius and K-factor from the rule; the bend zone (BA = θ(R + K·T)) comes out of the existing sheet so the flat pattern keeps its size; the line at the bend's centre, start, end or on the mould line; the side holding a picked point stays (default the larger), flip folds down; flanges on the moving part ride along

2026-10-08 11:37:33 +00:00

document.rs

Appearances on faces, bodies and components (face > body > component > material > imported colour), with names and opacity and a built-in library of 20 (metals, ABS colours, glass, rubber, wood, paint); AppearanceCommand takes bodies, faces (points) or components, a library name or a colour with opacity, or nothing to clear; appearance.library, appearance.list (a body's resolved look and per-face colours); file format 3 turns the old body colour map into body appearances

2026-10-08 11:37:33 +00:00

eval_more.rs

Sheet metal Fold (SheetMetalFoldCmd): fold the base panel along a sketch line (followed when the sketch changes) or two points on its face; angle, bend radius and K-factor from the rule; the bend zone (BA = θ(R + K·T)) comes out of the existing sheet so the flat pattern keeps its size; the line at the bend's centre, start, end or on the mould line; the side holding a picked point stays (default the larger), flip folds down; flanges on the moving part ride along

2026-10-08 11:37:33 +00:00

eval.rs

Sheet metal Fold (SheetMetalFoldCmd): fold the base panel along a sketch line (followed when the sketch changes) or two points on its face; angle, bend radius and K-factor from the rule; the bend zone (BA = θ(R + K·T)) comes out of the existing sheet so the flat pattern keeps its size; the line at the bend's centre, start, end or on the mould line; the side holding a picked point stays (default the larger), flip folds down; flanges on the moving part ride along

2026-10-08 11:37:33 +00:00

expr.rs

Parameters: unit-aware parameters (an inch parameter reads bare numbers as inches), atan2/mod/trunc and clearer unit errors, cycle paths (a → b → a), rename with every reference following (expressions, feature inputs, dimensions, favourites, comments), deletes refused with the list of users, parameter errors shown on the features using them, parameters.add/rename/delete/comment/users/graph/complete and expr.evaluate; ChangeParameterCommand renames and favourites; hostile test no longer writes stray files

2026-10-08 00:15:22 +00:00

format.rs

Appearances on faces, bodies and components (face > body > component > material > imported colour), with names and opacity and a built-in library of 20 (metals, ABS colours, glass, rubber, wood, paint); AppearanceCommand takes bodies, faces (points) or components, a library name or a colour with opacity, or nothing to clear; appearance.library, appearance.list (a body's resolved look and per-face colours); file format 3 turns the old body colour map into body appearances

2026-10-08 11:37:33 +00:00

joints.rs

Contact Sets (EnableContactSetsCmd, EnableAllContactCmd, DisableAllContactCmd, ContactSetCmd, contact.edit/list/check): driving a joint stops where bodies of one set would pass through each other (bisection to the touch; penetration found by ray parity and depth on the tessellations); Motion Study (FusionMotionStudyCommand: joint values keyed along a timeline, motion.play, motion.export of occurrence poses per step as JSON or CSV without changing the design, contact-aware); Exploded views (explode.create automatic or by hand, explode.show without changing placements)

2026-10-08 11:37:33 +00:00

lib.rs

Contact Sets (EnableContactSetsCmd, EnableAllContactCmd, DisableAllContactCmd, ContactSetCmd, contact.edit/list/check): driving a joint stops where bodies of one set would pass through each other (bisection to the touch; penetration found by ray parity and depth on the tessellations); Motion Study (FusionMotionStudyCommand: joint values keyed along a timeline, motion.play, motion.export of occurrence poses per step as JSON or CSV without changing the design, contact-aware); Exploded views (explode.create automatic or by hand, explode.show without changing placements)

2026-10-08 11:37:33 +00:00

motion.rs

Contact Sets (EnableContactSetsCmd, EnableAllContactCmd, DisableAllContactCmd, ContactSetCmd, contact.edit/list/check): driving a joint stops where bodies of one set would pass through each other (bisection to the touch; penetration found by ray parity and depth on the tessellations); Motion Study (FusionMotionStudyCommand: joint values keyed along a timeline, motion.play, motion.export of occurrence poses per step as JSON or CSV without changing the design, contact-aware); Exploded views (explode.create automatic or by hand, explode.show without changing placements)

2026-10-08 11:37:33 +00:00

params.rs

Sheet metal Fold (SheetMetalFoldCmd): fold the base panel along a sketch line (followed when the sketch changes) or two points on its face; angle, bend radius and K-factor from the rule; the bend zone (BA = θ(R + K·T)) comes out of the existing sheet so the flat pattern keeps its size; the line at the bend's centre, start, end or on the mould line; the side holding a picked point stays (default the larger), flip folds down; flanges on the moving part ride along

2026-10-08 11:37:33 +00:00

plastic.rs

Plastic: Rest (round or rectangular pad, solid or hollow wall, draft) and Plastic Rules (the six-rule library, design rules from expressions using Thickness, active rule, rules assigned to bodies; a body's rule gives Boss and Rest their draft and grooves their clearance), plastic.rules; docs/oracle.md lists the plastic features as no oracle (licence) with the analytic tests that cover them

2026-10-08 05:50:50 +00:00

project3d.rs

Clippy: assign operators in the path sweep, isocurve grid and centre of mass

2026-10-08 09:42:34 +00:00

project.rs

Sketches on body faces follow their face: the plane is a face reference found again on each evaluation (same normal, nearest the picked point), and face extrudes (Extrude on a face, Press Pull) use the linked projection of the face's edges instead of a frozen copy, so they follow when earlier features change

2026-10-08 07:42:31 +00:00

sheet.rs

Sheet metal Fold (SheetMetalFoldCmd): fold the base panel along a sketch line (followed when the sketch changes) or two points on its face; angle, bend radius and K-factor from the rule; the bend zone (BA = θ(R + K·T)) comes out of the existing sheet so the flat pattern keeps its size; the line at the bend's centre, start, end or on the mould line; the side holding a picked point stays (default the larger), flip folds down; flanges on the moving part ride along

2026-10-08 11:37:33 +00:00

tests.rs

Parameters: unit-aware parameters (an inch parameter reads bare numbers as inches), atan2/mod/trunc and clearer unit errors, cycle paths (a → b → a), rename with every reference following (expressions, feature inputs, dimensions, favourites, comments), deletes refused with the list of users, parameter errors shown on the features using them, parameters.add/rename/delete/comment/users/graph/complete and expr.evaluate; ChangeParameterCommand renames and favourites; hostile test no longer writes stray files

2026-10-08 00:15:22 +00:00