bherbruckandjonaswre 1abd989a67 test: land the remaining ignored regression tests from #548-#573 (#582) ...

Ignored regression tests for #530, #531, #541, #542, #545, #547 and #570, from #548, #549, #550, #552, #555, #573 and #572.

Co-authored-by: jonaswre <jonas.wrede@beyondit.gmbh>

2026-10-13 02:51:12 -04:00

..

blind_hole_in_long_d_profile.json

test: failing regression test for #544 (ignored until fixed): Blind Ø2 hole into a long D-profile bar is refused ("exact fallback … takes planar faces only") although it stays clear of the round face (#551)

2026-10-13 02:28:12 -04:00

join_struts_on_bore_wall.json

test: failing regression test for #268: Panic from truck-topology lib.rs:186 when joining struts that end on a bore wall (#283)

2026-10-12 11:18:24 -04:00

loft_cut_beside_round_hole.json

A round hole elsewhere on a body no longer breaks a loft cut beside it: a loft cut from a pocket floor (556.68 x 99 down 4 mm to 80 x 80), with a 35 mm hole 66 mm away that it never touches, failed with a kernel panic in TroughFall, while the same cut without the hole, or with the hole made afterwards, worked

2026-10-10 17:57:34 -04:00

oblique_cut_of_cylinder_hang.json

Moving a body that a boolean made no longer hangs: a boolean between a cylinder and a tilted plane (an elliptical edge) froze the app at 100 % CPU, because its retries move both bodies and the result back

2026-10-10 17:57:34 -04:00

oblique_cut_of_cylinder.json

A thin part trimmed by a long one is no longer refused as an implausible result: a 437 mm bar with a 3 mm concave arc in its profile, cut by a 920 mm prism with a top tilted 21 degrees, failed with "implausible result volume 3870" (it was 3694 before the cut)

2026-10-10 17:57:34 -04:00

ring_cut_below_recess_thin_floor.json

test: land the remaining ignored regression tests from #548-#573 (#582)

2026-10-13 02:51:12 -04:00

shallow_loft_cut_from_top_face.json

A panic while healing a boolean result no longer ends the boolean: a shallow, wide loft cut from a top face (556.68 x 99 down 4 mm to 80 x 80 in a 900 x 480 x 160 slab) failed with "called Option::unwrap() on a None value"

2026-10-10 17:57:34 -04:00